i just recieved my evo 3d today threw ups. and i noticed my power button is hard to press to turn the screen off... anyone else ran into this problem?
The button is built into the battery cover so remove it and place it back on.
Sent from my PG86100 using Tapatalk
make sure your battery door is completely on and snapped in the correct spots.
i have issues where either the power button is way too easy to press or way too hard. hopefully a new case will solve that.
I had a badly dysfunctional power switch with my first 3VO, I have since exchanged it for a new one.
And, no, in my case it was not the battery cover-power switch interface, it was the switch itself. I removed the cover and directly pressed it. Strange thing was, with mine, if I removed and replaced the battery, I could get one or two presses that registered, otherwise nothing -- no wake/sleep, no power off/on.
My wife and I both have Evo 3d's and her power button is way easier to push than mine. I switched the back covers between the phones and the problem followed the cover. I looked at both and the power button on my cover isn't molded correctly where it pushes on the phone. It is shorter so it sits further in the phone and doesn't work quite right. I called HTC and Sprint and there isn't a replacement cover available yet so they are going to switch out the phone.
I had a power button issue, where if I pushed the button, it would come up with the shutdown menu and no option just turn off the screen. Was in the process of going take it back for a replacement and found that when I removed the case to switch the memory card that my one was working as it should. The hardness went away and the option to turn off the screen came back. Strangest thing I seen since it truly seemed like a hardware issue.
i am going to check a few out in store and see if mine is like what you describe. To me its set pretty low and the button doesnt stick out very far.
Mine sticks out pretty far... isn't easy, or hard to press. I guess i got lucky.
Mine is really touchy, when I press it to lock the phone it sometimes goes to the shutdown popup. Sorry this post wasn't more helpful to the op, lol, just sharing.
Related
Sigh...
Whenever I press my power button, I have to press it directly in the middle to get the screen to turn on. If I press the button towards the edge (left or right) the button just pushes down (becomes flush with the phone frame) and there is no click and the screen doesn't turn on. Not being picky, I just have to press the button more than 3-4 times and it feels loose.
Is anyone else's phone like this? Would help if someone could post a picture of the plastic tab underneath their power button. It feels like mine is broken.
I dunno about you but sometimes my power button won't even work. I have to take the case off, remove the battery, put it back in, then restart the phone to get it to work again. Kinda strange...
i was thinking i had the same issue earlier, then i just reseated the back and now all is well... now if i can get the rubberized black case from sprint i will be in full effect!
If you take the cover off, you will see that the button is a very small rubber and it lines up with the power button on the case, so you have to press it in the middle
So does this fix apply to power buttons that are really easily pressed too?
Sent from my PC36100 using XDA Premium App
devgrp said:
If you take the cover off, you will see that the button is a very small rubber and it lines up with the power button on the case, so you have to press it in the middle
Click to expand...
Click to collapse
I've actually taken the case off and pressed the button to see if the phone would turn on. Yeah no go. It's like it locked up or something.
My evo 3d has a super sensitive power button.. it does not click at all. If I hold my phone in a land scape i accidentally turn it off if i even rub my finger over it. The design of the power button is terrible
I am exchanging this phone tomorrow hopefully I wont have any further issues
Brandon_m25 said:
So does this fix apply to power buttons that are really easily pressed too?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I got a case off eBay that has the power button recessed...paid $6 Also managed to get a 32 GB SD Card for $21
My mom's is super sensitive too and is pressed when holding in landscape, also has no click. Should she take it back or has anyone opened the back and fixed it?
Sent from my PC36100 using XDA Premium App
Reason I really want to know is cause she got one and gave her ogevo to my sister and she misses her og. So I talked her into trading me her 3vo for my og.
Sent from my PC36100 using XDA Premium App
My power button was driving ne crazy. I couldn't get it to work consistently when trying to turn the screen off, and I would sometimes get the reboot/power off confirmation box while using the phone, like the button was somehow being held down.
I found that if I pulled the top left corner of the back from the fully locked position just slightly, the button worked much better.
By this afternoon, I was tired of repositioning the back every time I took the phone out of my pocket. I went to a Sprint store, and they tried a new back. That didn't solve the problem, so they swapped my device for a new one. Problem is 100% better now. Feels great now and works perfectly.
Sent from my PG86100 using Tapatalk
I had the same problem with mine. Got it home from just buying it and couldn't turn it back on. Thought the battery was dead so plugged it in and presto, it came on with a decent charge still on it. Then I couldn't turn it off or put it into sleep mode. Took it back to the store 1 hour after buying it. RS exchanged it immediately, so no issue there. The new one had a definite click to the power switch where the first one had no click at all. Working great so fa.
Cool, I'm gonna get her to take it back before we switch then. Thanks guys
Sent from my PC36100 using XDA Premium App
Mine is fine love how they redid it so no more broken or squeeky buttons smooth no issues love it .
ranger61878 said:
I got a case off eBay that has the power button recessed...paid $6 Also managed to get a 32 GB SD Card for $21
Click to expand...
Click to collapse
Could you point me in the right direction for that kind of case?
Sent from my Shooter
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Not mine....
dmcduck said:
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Click to expand...
Click to collapse
work on reseating the back shell of the phone, i had the issue too at first and i thought it was a defect, but i played with it a couple times and got it to work like a normal power button
Nope not at all, I actually have to press it more than once sometimes and harder the second time for it to work......
yea mine is a lil sensitive...cant have it my pocket because of it..pulled it out a couple times and the phone bouncing around in my pocket opened apps and almost called ppl
Throw an OtterBox on there....
you have to give it a little lovin- WON"T happen by accident.
Also - saved my3D from a nice 5 foot drop courtesy of some Crazy 3 yr olds on the 4th.
mine is like that and I hate it!!!
U guys have cases on the phone? I guess not
Sent from my PG86100 using XDA Premium App
I actually find the new power button a little bit better to my liking, a lot easier to find in a blind poweron. But I do agree that it might be a little too sensitive. I've found that the phone turns itself on while in my pocket - which is a bad thing because on shake the led flashlight turns on lol! Of course that kills the battery...
Also when trying to turn on or off... sometimes i see the turn off, reboot menu pop up which just simply put, never happened with the evo og. And while i like the ease of use and how fast it reacts to turning off/on, it seems to be a bit of a problem ATM
not not at all sensitive. it's actually under sensitive. some time i get frustrated because i have to push it so hard in the exact sweet spot just to get it to turn on. after having it for over a week now it's getting better, but at first i couldn't even get the thing turned on.
Not mine in fact mine is kinda hard to push. I'm going to the Sprint store I bought mine from this weekend to see if I can get it switched out because I have light leaking through the ring that surrounds the search key, and it bugs the hell out of me lol. So I hope my new one is gonna be normal.
This happens to me with or without the case. I did have a very brief time where the power button would not respond at all, and discovered that the back was causing it (I had swapped the OEM 8G card for my 32).
I don't think this is a big enough problem for me to try and swap the phone out, although it is a little annoying. I suppose in time I'll learn not to push the power button too long.
I have the same problem with the sensitive power button but I'm on a Samsung Galaxy S. I'm wondering if there is dust in the way... Anybody ever find a fix or diagnose the problem for this? I've seen the same problem across multiple devices on the forums so I am starting to believe its a wear and tear type of thing.
Mine is kinda sensitive. But not as sensitive as the one I saw at my local sprint store. Interesting how it seems like no two EVOS are the same.
Good thing though is that since the button is built into the backcover... Maybe picking up another one can deliver a more sensitive/stiff experience.
Sent from my PG86100 using XDA App
I think this might be a software issue...but wanted another opinion.
sometimes when I hit the power button to turn the screen off, it turns off and then comes back on. It doesn't happen ask the time so I can't figure out if it is me or something causing the phone to wake back up.
Sent from my PG86100 using XDA App
It could be a short in the power button. Mine does this occasionally, just make sure you push the button down firmly and quickly.
This happens on my 3D, as well. It also happens on my Shift 4G. I can't recall if it happened on my Evo 4G. It happens a lot more often on the 3D, than with any other phone.
It happens to me about three or four times a day.
Happens to me occasionally and it also happened on my last phone. Nit biggie
Sent from my PG86100
I blame my thumb touching the volume keys - the latter can switch on my phone as well.
Having the phone in my hands, fingers left and thumb right aligned, and pressing down the power button with the index key forces the thumb (or lower base of it) to excert a force on the frame... oops, the volume keys are just placed there... Might be attributed to my big hands, though ;-)
It get's worse when I have a skin around it...
Cheers
Christoph
Mine does this as well, annoying.
locked & loaded
Mine does it the other way around, when i press power to turn the screen on, it comes on and goes off before I can get to slide to unlock the screen.
It's not a software issue, it's a hardware one. It's the power button, it gets mushy. Take the cover off and thoroughly clean it, it should click just once when you press it after that. if not, well, you're out of luck
Not sure if this is the right section, mods feel free to move.
So last week I dropped my amaze, and the screen busted up pretty good. Still worked, I just had to read things between the cracks. Fast forward to today, the digitizer/lcd that I ordered showed up. I made the switch, made sure everything was connected, put it back together, and I got nothing. Won't power on. If I connect to the charger, I get the charging light, but I can't for the life of me make it power on. Any ideas? I've already double checked the cables, and they all look pushed in far enough. Can't find anything else that isn't connected. I'm surprised it will charge without coming on. Maybe the digitizer/screen I bought are duds? Busted up the old ones pretty good taking it apart, so I can't pop the old one back in.
edit: Okay, I got it to boot by plugging it in, and removing/popping the battery back in. Looks like it's just my power button that's toast. How do I fix the power button?
ok, your button may be not on the whole way or something lol... but you can wake the phone with the camera button right?
ziggy46 said:
ok, your button may be not on the whole way or something lol... but you can wake the phone with the camera button right?
Click to expand...
Click to collapse
Kinda? I installed a lock screen app that lets hardware buttons wake up the phone. So using that, yes, the camera button wakes up the phone. I really don't want to pull it apart again, those ribbons are a PIA to get back into place. I've kinda looked around on the net but haven't found any conclusive answers. Meh.
The button seems very fragile on this device. On my other phones I am in the habit to click the power button to turn off the screen. But has anybody had their button "wear out" and need to be replaced?
Maybe I would be better off to double tap the screen to turn off the screen?
I've had mine for almost 2 years now and always turn the screen on/off via power button ... zero issues here, it still works as it did on day 1
Yeah me neither is working fine for almost 2years
Thanks guys, I was afraid it might be fragile since it jiggles. I just read a forum with people that bought refurb lg g5 and sent it back for rma to the ebay seller because the power button "jiggled around" and they thought the phone must be fooked up and sent it back for a refund
Yes it does. Dirt collects behind it and the button feature fails. Sensor still works.
You will need to buy a phone repair kit, and a button to replace it. All you need is a blowdryer to reheat the plate that keeps it in place, and remove it. Consider buying a new plate for it as you could damage it taking it off.