Hi, I've just gotten my galaxy ace for 3 days. I updated my fone to gingerbread using S5830XXKPE and odin from samfirmware. It's been restarting/shutting down by itself after the update so I wanted to downgrade to froyo again but I tried downloading and flashing a lot of other versions but, no luck. It hangs and stays at the "Galaxy ace" part of the boot and doesn't open. But whenever I flash it back to S5830XXKPE, it opens and works but I think it is bugged and I really cannot downgrade to other firmwares. Is anyone else having the same problem??? Help please >_<
Update:
I've successfully flashed it with S5830XXKPB but still its GB 2.3.3, I still can't flash it with froyo 2.2.1 firmwares. help pretty pleaseeeee...
Download a multipackage 2.2.1 firmware, one that when you unzip it will have several files. You probably flashed a single package .tar that caused the brick.
A single package update contains only some files to be replaced over the original 2.2 firmware and is not the full rom so you'll have to flash a multi package then update to your desired single package.
XDA ♥
Thanks for replying. Actually I'm using odin multidownloader 4.38 and yes, I did use the multipack not a single .tar.
Here are the list of firmware I've downloaded and used to flash my phone but unsuccessful all attempts: (and some firmware I've deleted because of anger lol) )
S5830XXJLC
S5830XXKA7
S5830XWKB7
S5830XXKC1
and now these two are the ones that boot up when I flash on my phone: (both GB)
S5830XXKPE
S5830XXKPB
I did successfully downgrade from 2.3.4 to 2.2.1 though. I believe the firmware from Samfirmware.com will have labelled "MULTI-CSC" or something like it.. I can't check now it's midnight here and sleeping time...
XDA ♥
okay, I'll try that too. Imma download 2.3.4 from samfirmwares then try downgrading to froyo. I'll tell ya how it goes. (crosses fingers) )
Successfully flashed to 2.3.4 but downgrading...no luck. What could be the problem...ohhhh maaaannnn!!! >_<
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link http://hotfile.com/dl/112095746/7fef9f5/S5830XWKB7.rar.html
imranaryan said:
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link http://hotfile.com/dl/112095746/7fef9f5/S5830XWKB7.rar.html
Click to expand...
Click to collapse
yeah, actually I tried that exact firmware S5830XWKB7 posted above. I think I'll just have it returned to where I got it. thanks for the replies people
It was I'm ly after rooting that i had the restart issue and only when titanium backup was using super user access. After upgrading super user in the market everything was fine after that - v2.3.4 running sweet now.
Sent from my GT-I9000 using XDA App
viper353 said:
yeah, actually I tried that exact firmware S5830XWKB7 posted above. I think I'll just have it returned to where I got it. thanks for the replies people
Click to expand...
Click to collapse
S5830XXKA6 was what I used. But oh well it would always be better to get a fresh phone
they said they'll just call me to get the new phone when it arrives.
imranaryan said:
Try This One S5830XWKB7 Its 2.2.1 i sucessfully downgraded frm Gb To Froyo
here is the Link
Click to expand...
Click to collapse
Successfully downgrade my gingerbread to froyo, although it is not the stock rom i guess..thanks to the poster.
You could still update by flashing to the new one from the older multi-package.
XDA ♥
sobirin90 said:
Successfully downgrade my gingerbread to froyo, although it is not the stock rom i guess..thanks to the poster.
Click to expand...
Click to collapse
Instead of saying thanks clicking on the thank button will be highly appreciated
Not to threadjack or anything but I did downgrade from 2.3.4 down to 2.1 XWKB7 everything works fine, Im on my correct CSC and the apn was preconfiged like it should be but when i connect to kies It says that it cant update my phone and marks my CSC as SER (wich it was with 2.3.4) but according to *272* Im using NEE
(wich is nordic as best I can gather)
Hope you guys understand this mess
Well do you have a nandroid backup of your system, data, etc?
No, I thought nandroid wasn't an option for us yet?
I have the correct csc and modem but its not the same PDA I have kb7 but stock was kc2
Just to update, kies was in a better mood today than yesterday and saw that I had the correct CSC and gave me an upgrade to stock
albertbm said:
not to threadjack or anything but i did downgrade from 2.3.4 down to 2.1 xwkb7 everything works fine, im on my correct csc and the apn was preconfiged like it should be but when i connect to kies it says that it cant update my phone and marks my csc as ser (wich it was with 2.3.4) but according to *272* im using nee
(wich is nordic as best i can gather)
hope you guys understand this mess
Click to expand...
Click to collapse
thank you <3 <3 <3 <3 <3
ODIN 4.38 can´t flashing? (mibip or startup?)
When you have problem with downgrade or upgrade firmware thrue ODIN and you are user WIN7 ---
- You can use to flash only one firmware!!!!
(it does not matter which, !!!! BUT you must going UP and DOWN,UP,DOWN like this(2.3.4 to 2.2.1 to 2.3.4 to 2.2.1)
----No like this (2.3.4 to 2.3.4 it doesn´t work) )
- You must after every re-flash--------reboot your PC !!!!!
- Your ODIN 4.38 stop at -- download mibib or something else? It´s my problem too
- After restart everything is O.K.and NOW ODIN doing everything to
I´m used this firmwares : - S5830XXKC1 COOPER.OPS CSC - S5830SERKB3 2.2.1 2011 March 19
h.t.tp://hotfile.com/dl/111959706/1f7adaa/S5830XXKC1.rar.html (without dots)
- S5830XXKPH COOPER.OPS CSC - S5830SERKPH 2.3.4 2011 June 2
h.t.tp://hotfile.com/dl/120302147/b6ef9dc/S5830XXKPH.rar.html (without dots)
Password is samfirmware.com
Sorry my english language is bad, but I think so it´s a big problem with little solution
Bye
Related
i changed my firmware to 2.3.4 recently after bought my cell
is there any way from tht i can get the previous froyo detail
like csc ops and firmware num
bcz i recently change my firmware to froyo again frm samfirmware.com
but fone is stil not updating via kies
any solution or sujjesion ?
take 2.3.4, than 2.3.3, than 2.2 - official fw from kies, than try to use kies.
i already have 2.3.4 so kies says can not update firmware lol thts wy i ask
official update is not avaliable in India..
Its still stuck on 2.2.1 so thats why kies is not showing any upgrades.
the indian firmware is DDKC1
justkiddinghere said:
i changed my firmware to 2.3.4 recently after bought my cell
is there any way from tht i can get the previous froyo detail
like csc ops and firmware num
bcz i recently change my firmware to froyo again frm samfirmware.com
but fone is stil not updating via kies
any solution or sujjesion ?
Click to expand...
Click to collapse
If there NO updates in Samfirmware, then NO updates from Samsung too!
CHEERS!
bt if i want my original froyo back so then?
how can i ?
justkiddinghere said:
bt if i want my original froyo back so then?
how can i ?
Click to expand...
Click to collapse
If it is in Samfirmware, then just download it from there. But if you MISSED warnings in Flashing and if you havent your ORIGINAL FROYO even in Samfirmware, then you can BLAME ONLY your self. Sorry!
CHEERS!
asian froyo is there but cant update via kies it says cant upgrade this firmware it means this is not correct one
justkiddinghere said:
asian froyo is there but cant update via kies it says cant upgrade this firmware it means this is not correct one
Click to expand...
Click to collapse
Hey!
Jep its there, but its too ONLY FROYO. I dont see any GB or something else. Because you cant update, there is NO update yet, like 2.2.3 or something else. There is ONLY 2.2.1(FROYO).
CHEERS!
ok will weit and c when it will b out
thanx
the indian firmware is DDKC1...
flash it from samfirmware n ull get ur warranty back....
PDA:S5830LUBKP7
Phone:S5830LUBKP7
CSC:S5830LUUBKP7
http://www.mediafire.com/?2vha3ndq7jaa282 NEW MIRROR
install via ODIN.
Works Fine to me for now.. without black screen. Wifi Works Fine too..
Click on Thanks if you like.
ROOT:
put the file on SD card and open on Recovery MODE (HOME+POWER) (Thanks ilarrain)
davebyone said:
PDA:S5830LUBKP7
Phone:S5830LUBKP7
CSC:S5830LUUBKP7
http://www.multiupload.com/V99KK6S3RI
install via ODIN.
Works Fine to me for now.. without black screen. Wifi Works Fine too..
Click to expand...
Click to collapse
Great news!!! I have installed and works fine with my ACE L version, the 3G connection works fine (my operatos works in 1900MHz frec)
This is the information in samsung kies
The downloaded file is an EXE, run and get a TAR file, flash with ODIN with signle package option.
If you come from 2.2.1 is very important to flash another samfirmware ROM such KPH, then flash this.
If you come from 2.3 don't worry.
And good news, this is original and appears in Samsung Kies, look
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 July 13
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
The portuguese BR present in this firmware ???
Thanks
schossler said:
The portuguese BR present in this firmware ???
Thanks
Click to expand...
Click to collapse
Yes, have English/Spanish/Portugese and other (not know for me)
Thanks for it! I've just installed it and it's working fine. Anyways, it seems I can't use it with some custom roms because of the modem (I installed coderom v2x and 3g it's not working again, just like kph) So I guess I'll wait to install it again till there are some custom roms for it.
Thanks! It work greats anyways!.
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
jilllmoni said:
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
Click to expand...
Click to collapse
Couse i'm from chile, and both kpn and kph have problems with 3g (I have to deactivate it to get the cellphone to work) And kp7 works great with that =)
root this version?
axelmaan said:
root this version?
Click to expand...
Click to collapse
Yes, with AceGingerRoot, works fine
jhijman said:
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 Ju
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
Click to expand...
Click to collapse
Download the Rom u mentioned above from samfirmware . It is the official Samsung Rom for Spain , u will not regret after flashing . It is best available stock Rom untill now .
"help to get helped"
axelmaan said:
root this version?
Click to expand...
Click to collapse
you can root with this file on recovery mod. HOME+POWER BUTTON (thanks for ilarrain)
luisjoseb said:
Yes, with AceGingerRoot, works fine
Click to expand...
Click to collapse
Thanks!, whit cwm update from sd ! and ready?
axelmaan said:
Thanks!, whit cwm update from sd ! and ready?
Click to expand...
Click to collapse
yep!!! this is it
I think something is wrong ! I tried to download the file but Norton said it was virus and deleted the file.. are you sure it s original file ? Does anybody have same problem with me ?
cazorla41 said:
I think something is wrong ! I tried to download the file but Norton said it was virus and deleted the file.. are you sure it s original file ? Does anybody have same problem with me ?
Click to expand...
Click to collapse
maybe it happens because the file extension is .exe
but this is a win rar extract with a .tar file inside.
jhijman said:
is it this one from samfirmware because there it is stated as 2.3.3?
S5830XWKPKN## COOPER.OPS CSC - S5830OXXKP7 2.3.3 2011 July 13
because my wife is getteing mad of the SOD's of her phone so i'm looking for a good rom with good wifidrivers
Click to expand...
Click to collapse
Nop, in SamFirmware only appear the Global Version, this firmware is for the L version, not for the Global, B or T, only for L, this device update to Ginger this day, this is and original firmware and the LatinoAmerican Users with unbranded devices see this update via samsung kies, in the second post I put a screen capture.
For the B and T version exist the 2.3.4 from Vivo Brazil, search in this forum if you want to download it
luisjoseb said:
For the B and T version exist the 2.3.4 from Vivo Brazil, search in this forum if you want to download it
Click to expand...
Click to collapse
And you can also use the Vivo FW unbranded, just don't flash the csc file.
jilllmoni said:
Why KP7 instead of KPH or even KPN? I read KPN has lots of improvements over KPH. Thanks for your work
Click to expand...
Click to collapse
Because their network in South America uses a different baseband. Thus, different firmware, drivers etc...
works fine! (entel chile)
Hi all,
I am aware that there are some other posts about newbie and firmware questions, but I guess since I upgraded to the latest firmware - hope it is okay to ask the question.
I have recently upgrade the Android to 2.3.4 XXKG6 - but now when I connect to Kies it says that the firmware is not upgrade-able. did I do something wrong?
What is the most stable,useable, efficient firmware available?
my phone is :
Model:GT-I9100
Android Version 2.3.4
BaseBand: I9100xxKG6
Kernel : 2.6.35.7-I9100KG6-CL425236
Build Number: GINGERBREAD .XXKG6
It will be much appreciated if I someone can point me to the right direction on how to do the installation and where I can get the files.
Thanks again
i think its saying not upgradeable as thats the latest software isnt it? i believe it is so it is simply saying there isnt any further update CURRENTLY
xxkg5 was the official firmware that is upgradeable with kies.
xxkg6 is a custom that is cooked here at xda.
Cooked firmware does not work with kies as it is not recognized that is why you have to use either odin or cwm.
There is a warning at the beginning of the xxkg6 thread that tells you that kies will not work after installation.
Kies will pretty much never upgrade you from an odin flashed firmware, most of the time it will not recognise it as a valid version due to mixing and matching files.
Though, by the time you are odin flashing you will have gotten fed up by how slow firmware updates come anyway
But yes, KG6 is the current "best" stock firmware available.
Thank you guys.
This is a steep learning curve for me at the moment so bare with me
So, currently I have the latest Custom Firmware, is this correct?
Another questions:
* when I use the ODIN to flash the firmware to KG6 the option of "repartition" is not ticked. Do I need to re-flash it again and "ticked" the repartition option?
is there any difference with the "Repartition" option ticked and NOT ticked?
Thanks again
Sometimes a flash may carry a file called a pit file.If so the re-partition box will be automatically checked otherwise never under any circumstances should you check that box if you are not using a pit file.If it is needed the instructions will let you know otherwise never.If you are on XXKG6 and all works fine there is no need to do anything else unless you want to flash a ROM or something.That's up to you.
Sorry to be a big pain here but I am wondering if it is possible to down grade / RESTORE to the original firmware I had? (incase I want to)
it was
Android version is 2.3.3
build number is z2KG2
kernel is 2.6.35.7-I9100
I should have asked this before I did anything else.
thanks again
ardabelati said:
Sorry to be a big pain here but I am wondering if it is possible to down grade / RESTORE to the original firmware I had? (incase I want to)
it was
Android version is 2.3.3
build number is z2KG2
kernel is 2.6.35.7-I9100
I should have asked this before I did anything else.
thanks again
Click to expand...
Click to collapse
Yes flash stock rom from the stock romthread .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
ardabelati said:
Sorry to be a big pain here but I am wondering if it is possible to down grade / RESTORE to the original firmware I had? (incase I want to)
it was
Android version is 2.3.3
build number is z2KG2
kernel is 2.6.35.7-I9100
I should have asked this before I did anything else.
thanks again
Click to expand...
Click to collapse
Yes, reflash in Odin. List of firmwares here, hope yours is listed.
Hello again.
I have tried to restore my stock firmware zskg2 from the suggested website.after reboot my phone Judy rooting and not showing any menu.its just keep rebooting .what have i done wrong? I didn't do the kernel flash as my understanding it not neccesary .pls let me know what i have missed .
Thank you
what exactly did you flash ?
kernal flash is necessary to restore your old version.
Cosmic Blue said:
what exactly did you flash ?
kernal flash is necessary to restore your old version.
Click to expand...
Click to collapse
I did the stock firmware as stated in the :
http://forum.xda-developers.com/showthread.php?t=1075278
What I did was downloaded the ZSKG2 firmware and using ODIN I flash the firmware. Is this way to do it to go back to official GingerBread 2.3.3?
I didn't do any Root processes.
Do I have to do the Kernel flash as stated in the tutorial? :
http://forum.xda-developers.com/showthread.php?t=1075278
My understanding is that I do not need to do the Kernel unless I want to do Root. am I correct?
*** Reason for trying to go back from 2.3.4 XXKG6 is because my WIFI signal does not look as strong as the 2.3.3 (let me know if this is incorrect)
Thanks
kernal flash is to bring to stock that mean it removes the root only.
firmwares do not change gingerbread versions from 2.3.3. to 2.3.4 or 2.3.4 to 2.3.3..
you need an offical carrier branded version that does a wipe of your phone.
Cosmic Blue said:
kernal flash is to bring to stock that mean it removes the root only.
firmwares do not change gingerbread versions from 2.3.3. to 2.3.4 or 2.3.4 to 2.3.3..
you need an offical carrier branded version that does a wipe of your phone.
Click to expand...
Click to collapse
Hi Cosmic,
Thanks for your reply.
Cosmic can you please guide me to where I can get the stock firmware to put everything back to where it used to?
Much appreciated
Thanks
Hi all,
I have restart My modem and and my Phone but my WIFI is not improving at all, I am just wondering if any one can help on how to put it back to my original firmware
Thanks
Your phone has gone into whats called a boot-loop.To get out of it enter into recovery mode (menu-volume up-power button) wipe cache,wipe cache repartion,factory reset and reboot system.If that doesnt work enter in download mode and repeat the full flash following word for word the instructions and repeat if needed the recovery wipe.
use this to wipe your device and return it 2.3.3, then upgrade back to xkg2.
XWKF1
This package has: PDA:XWKF1| PHONE: XXKE7| CSC:XEUKD1.
This will wipe your device so do a backup!
Download: http://www.multiupload.com/9OTQ8C6O5D
XWKF1 Stock Kernel: Use the ZSKF1 kernel, it's the same kernel.
THANK YOU ALL!!!
I got out of the boot loop using : recovery mode (menu-volume up-power button) wipe cache,wipe cache repartion,factory reset and reboot system
Thanks Cooza for the info. I got to 2.3.3 now
Now that I am back to starting point again. I would like to hear from you guys of the plus and minus of upgarding (which I should have asked in the first place)... I am learning the hard way...
Thank you for your generosity and patient explaining to me.
Thanks
Regards
KPH is the latest version (2.3.4) which theoretically should be better than KPN (2.3.3), but i have found many ROMS's have KPN as their base & these ROM's are supposed to be the fastest & stable of all ROM's . I am using the latest 2.3.4 KPH Stock ROM provided by Samsung ; & so m confused to which ROM should i go for , those based on KPH or KPN. Please guys if anyone can help me much appreciated (even though i m sound dumb to some people !!)
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
chinoyray said:
2.3.4 KPH is not the latest. It was a leaked ROM dated June 2, 2011.
2.3.3 KPN is an official release by Samsung dated July 13, 2011.
Click to expand...
Click to collapse
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
nilzkul said:
Well, i am running on leaked 2.3.4 KPH, i wanna go back to KPN, but though after flashing with KPN it shows 2.3.4 KP6
what to do, anyone plz help
Click to expand...
Click to collapse
flash a full package KPN
setya5785 said:
it might be complete.... but it's a leaked rom
not even even samsung feel it stable enough to give it official release (otherwise, we'll get 2.3.4 KPH official release instead)
being official release (through kies, samsung service center), samsung must have feel that KPN already stable for mass release. iron some bug, etc.
flash a full package KPN
Click to expand...
Click to collapse
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
nilzkul said:
u mean one package flashing? i will be helpful if u provide direct link for it
thanks
Click to expand...
Click to collapse
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Lenks said:
How to flash one package? In odin check One Package and just mount the rar and click start? What about OPS file?
Click to expand...
Click to collapse
You need the Cooper_v1.0.ops and then enable one package. Afterwards select the zip in one package.
You can download everything here.
Note that you have to extract the first zip folder until there's only one zip left which is called S5830XWKPN_S5830XWKP6_S5830OXXKP7_HOME
prat_merc said:
It might be leaked rom .... but it is a complete rom !!! Its not like the things will be changed when samsung officially announces it !!
Click to expand...
Click to collapse
The only new feature kph 2.3.4 has that is not present in kpn 2.3.3 is the video chat in gtalk.
Galaxy Ace users cant even use that feature because the phone does not have a front facing camera.
That is why a lot of ROMs are based on KPN. For the reason that most bugs have been fixed and Samsung has ironed it out already.
Sent from my GT-S5830 using xda premium
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
Use stock then.
Cheers
setya5785 said:
either seperate file (all 4 including appboot, pda, modem, csc) or one package (but also must include every file needed) work just fine.
i use this
2.3.3 KPN firmware - http://www.multiupload.com/Y643XGWMMN (password: sampro.pl)
it's one package file that include all 9 files needed for full package.
i use it to flash my ace from froyo stock
Click to expand...
Click to collapse
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
nilzkul said:
hey thanx, i flashed one package with your given link, but after flashing it shows me KP6 inspead of KPN
Click to expand...
Click to collapse
That's correct. Baseband of KPN is KP6
Cheers
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
use stock KPN. been using it for a long time. the custom ROMs are bringing back SOD.
Hey, but kpn will work correctly here on america? Do you know?
I'm using kph with latinoamerican modem, is something like that on kpn?
THanks
catapult1234 said:
That's correct. Baseband of KPN is KP6
Cheers
Click to expand...
Click to collapse
cheers
Everything went smooth
thnx mate
now i am running GR ACE 1.1.0 KPN
prat_merc said:
Yep thats whats confusing me .... which ROMs to prefer .... the KPH based ones or KPN , cause i have been following the ROM releases & even the said fastest Fla.sh ROM is suffering from SOD which i think is a Major issue !!! so any help on this topic ... cause i wanna flash my phone with a stable & fast ROM, as i will be away from my pc for a really really long time !!!!!
Click to expand...
Click to collapse
I have flashed fla.sh X2 on top of KPH (even though the author said it's KPN-based), and I have yet to encounter problems such as SoD's, FC's and such. I don't if I'm just lucky or it's something I did, but I can't seem to recreate the SoD problems (but I try, though).
Sent from my GT-S5830 using XDA App
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
JonnyBoy6 said:
n00b question!
I just got a S5830L, and after the KIES update I've got the following, is this still older/outdated than KPH and KPN?
Android: 2.3.4
Baseband: S5830LUBKP7
Kernel: 2.6.35.7-perf-CL366939 [email protected] #1
Build: GINGERBREAD.UBKP7
PDA: S5830LUBKP7
PHONE: S5830LUBKP7
CSC: S5830LUUBKP7
Click to expand...
Click to collapse
Android 2.3.4 is on par with KPH, so it doesn't seem like you are outdated.
But if I were you, just to be safe, I'd still flash it with KPH or KPN if I wanted to use a custom ROM.
I'm sorry for asking, but which country are you from? (Can't see the flag under your avatar as I'm browsing through my phone).
Sent from my GT-S5830 using XDA App
I have just flashed my European 2.3.3 SGS2 to the official firmware XWKI4 I've found on this site using Odin. The upgrade was fine and the system information on my device reads, that I have installed Android 2.3.4.
But when I start GTalk it is the same old version as before. I can not video chat with friends. So I believe no changes have been made?
How can I upgrade to 2.3.4 then - officially?
Should I flash back to my original XWKF3 firmware?
Are you sure there is no change, even i am using XWKF1 v2.3.3 and upgrade to XWKH3 v2.3.4 there is minor changes, do explore before saying anything.
Its normal for not having no video gtalk features in v2.3.4 as samsung decided not to include it. Btw who still use gtalk in the first place, that so not cool at all. People use google +, whatapps and skype.
phr00ta said:
How can I upgrade to 2.3.4 then - officially?
Should I flash back to my original XWKF3 firmware?
Click to expand...
Click to collapse
When 2.3.4 is rolled out it will be on the Kies servers .
But as you have 2.3.4 it may not update unless you roll back .
jje
http://forum.xda-developers.com/showthread.php?t=1230690
I upgraded to KI4, rooted it via CF-root, followed the instructions on CF-root guide, installed cyanogen mod nightly build 59, but it doesn't boot into cyanogen. Is anyone else having the same problem?
Gigacross said:
I upgraded to KI4, rooted it via CF-root, followed the instructions on CF-root guide, installed cyanogen mod nightly build 59, but it doesn't boot into cyanogen. Is anyone else having the same problem?
Click to expand...
Click to collapse
Did u wipe system?
avetny said:
Did u wipe system?
Click to expand...
Click to collapse
Yep, wiped the system.
However, I booted back into WCM, re-installed the ROM, this time I toggled signature check, and it worked. I don't know why, but I had to install it twice. Same thing for the google apps...