[TOOL 07/11] Easy Fre3vo w/ Perma-Temp, Bloatware Disabler & Overclock (Win/Mac/Lin)
I want to start by thanking TeamWin for all of their hard work and the effort they have put in to Fre3vo. I also want to thank Daddyroot for his "Easy Copy/Paste." Euegene373 for his Perma-Temp root method, and Coolbho3000 for his Cverclock work! I also want to thank Mikeyxda for helping tidy things up a bit!
What is Easy Fre3vo?
Easy Fre3vo is a simple batch file that will give you temp-root, as well as give you a functioning Superuser ability. I have tested Titanium Backup. It worked flawlessly. I hope this helps and makes things easier for everyone!
Windows - How to:
1. Download and Install HTC Sync (Download Here)
2. Uninstall HTC Sync
3. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
4. Download the attached ZIP
5. Extract the Folder
6. Open the Windows Directory
6. (a) Run Easy_Fre3vo_Start.bat
6. (b) If you lose root, Run_Easy_Fre3vo_Redo.bat
Mac - How to:
1. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
2. Download the attached ZIP
3. Extract the Folder to your Desktop (This is required)
4. Open Terminal (Finder > Search "Terminal" > Open Terminal)
5. Type: cd "desktop/Easy Fre3vo/Macintosh"
6. Type: chmod +x "./Easy_Fre3vo_Start.command"
7. Type: chmod +x "./Easy_Fre3vo_Redo.command"
8. Open the Macintosh Directory
9. (a) Run Easy_Fre3vo_Start.command
9. (b) If you lose root, Run Easy_Fre3vo_Redo.command
Linux - How to: (Thanks to Bigmase521)
1. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
2. Download the attached ZIP
3. Extract the Folder
4. Open Terminal and cd to Linux in the Extracted Folder.
5. Run this command in the terminal: chmod +x "Easy_Fre3vo_Start.sh"
6. Run this command in the terminal: chmod +x "Easy_Fre3vo_Redo.sh"
7. (a) Run this command in the terminal: "./Easy_Fre3vo_Start.sh"
7. (b) If you lose root, Run this command in the terminal "./Easy_Fre3vo_Redo.sh"
----------------------------
Bloatware Disabler:
This will remove the following Bloatware from your device:
mSpot Radio
DocMaster
TeleNav
MobiTV
Sprint
SpiderMan
Qik
Gameloft Widget
Report Agent
Nascar
HTC Log
eReader
AppSharing
Blockbuster
Windows - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open the Windows Directory
6. Run Remove_Bloat.bat
Mac - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder to your Desktop (This is required)
5. Open Terminal (Finder > Search "Terminal" > Open Terminal)
6. Type: cd "desktop/Easy Fre3vo/Macintosh"
7. Type: chmod +x ./Remove_Bloat.command
8. Open the Macintosh Directory
9. Run Remove_Bloat.command
Linux - How to: (Thanks to Bigmase521)
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open Terminal and cd to Linux in the Extracted Folder.
6. Run this command in the terminal: chmod +x Remove_Bloat.sh
6. Run this command in the terminal: ./Remove_Bloat.sh
----------------------------
Overclock
This will give you the ability, in SetCPU, to overclock your device to 1728000mhz.
Windows - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open the Windows Directory
6. Decide weather you have applied the OTA then, Run_Overclock_OTA.bat or Overclock_Pre_OTA.apk
Mac - How to:
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder to your Desktop (This is required)
5. Open Terminal (Finder > Search "Terminal" > Open Terminal)
6. Type: cd "desktop/Easy Fre3vo/Macintosh"
7. Type: chmod +x "./Overclock_OTA.command"
8. Type: chmod +x "./Overclock_Pre_OTA.command"
9. Open the Macintosh Directory
10. Decide weather you have applied the OTA then, Run Overclock_OTA.command or Overclock_Pre_OTA.command
Linux - How to: (Thanks to Kushdeck)
1. After aquiring root, if you used my method skip to step 5.
2. Enable USB Debugging [Menu > Settings > Applications > Development] (Thanks Kitinas)
3. Download the attached ZIP
4. Extract the Folder
5. Open Terminal and cd to Linux in the Extracted Folder.
6. Run this command in the terminal: chmod +x "Overclock_Pre_OTA.sh"
7. Run this command in the terminal: chmod +x "Overclock_OTA.sh"
8. Decide weather you have applied the OTA then, Run this command in the terminal: "./Overclock_OTA.sh" or "./Overclock_Pre_OTA.sh"
----------------------------
[Note: If you notice any errors while a script is running, after, please check the device to see if it is rooted before posting that it simply did not work. Strange, but sometimes errors occur and everything turns out just fine!]
----------------------------
Change Log:
[07/11]
Repaired Macintosh Scripts
Changed Bloatware to Disable, it's permanent!
Repaired Linux Scripts
[07/10]
Updated Macintosh Scripts
[07/10]
Updated Bloatware Removal
[07/10]
Updated Macintosh Scripts
[07/10]
Updated Linux Scripts
Updated Overclock Scripts: 2 Scripts
[07/09]
Easy Overclock
[07/09]
Perma-Temp Root (Thanks Eugene)
Cleaned Folders
Bloatware Remover
[07/07]
Cleaned Script
New Start, and Redo Script
Support for Macintosh and Linux
[07/07]
Initial Release
----------------------------
If you have any issues, let me know!
If you appreciate my work, you can buy a coke[I'm not of age to have a beer...] or simply hit the Thanks button, I appreciate both.
I'll need to try this out when I get home. Great work!
Thanks! I originally made this for my Sensation, but I figured those with Evo 3D's could use it as well.
From the phone or cpu?
Thanks for the script. I'm assuming this is just a script that should be run the first time... But what about every time you reboot? Does the same script need to ran? Or can you make a quick script with what's needed after this initial script is ran for every reboot?
@dp13 Run it from the PC
@tigereyeslalo I just run it every time I reboot, doesn't hurt.
Wisefire 1000 thanks. It doesn't get easier then that.
Sent from my PG86100 using XDA Premium App
Wisefire said:
@dp13 Run it from the PC
@tigereyeslalo I just run it every time I reboot, doesn't hurt.
Click to expand...
Click to collapse
Would you need to have SDK installed on ur PC or any PC u wish to run this.?
Sent from my PG86100 using XDA Premium App
Did not work for me. Are there special drivers I need? Is there any step you could have left out at all?? Maybe a small detail that you didnt include?
@CJPRICO Nope, I included the ADB files and everything.
@taygutta You're the first person it hasn't worked for, what version of windows are you running, and can you copy all of the text from the command prompt and post it here?
Worked prefect
Must not have the HTC sync drivers
Sent from my GT-P7510 using XDA Premium App
Do you have USB debugging checked? Worked in seconds for me.
Sent from my PG86100 using XDA Premium App
oh man....i just saw this....wish i brought my usb cable out to work...dont get off till 10 tonight....arrgghh.....
works great thanks for this...
FWIW I had to wait a min after the daemon was initialized then it went just fine.
Works great thanks.
will this work if you updated your OTA?
southphillysean said:
will this work if you updated your OTA?
Click to expand...
Click to collapse
It should. Yes.
Si I need to download the zip on the PC, extract it to.the phone then...?
Sent from my PG86100 using XDA Premium App
Wow thank you. I'm able to run chainfire now. Now to try some Tegra 2 games =)
EDIT: Spoke too soon. Chainfire will open but cant install CF3D to rom since its not fully rooted.
Related
Is the any of LG_IME.apk that works on "Joestone's Gingerbread 2.3.2".
I've had extracted LG_IME form "Lavero Burgos's data2system mod of AOSP Joestone Gingerbread" ROM and have installed it to "Joestone's Gingerbread 2.3.2"
The problem is, it says force close.
Thanks
use this http://gt540.co.cc/index.php?dir=&file=LG_IME_2.3.zip
I don't know what went wrong, I've installed the zip package via recovery but it seems that the problem remains.
When I select LG IME as the input method, It does still says force close.
But thanks anyway
heres what to do with my file:
TUTORIAL #7
- Dowload LG_IME_data2system and unzip in desktop
- Open System folder and copy the 3 folders: app, lib2 and usr folders to C:\*SDK\platform-tools\
- Plug your phone to the computer
- Open a CMD terminal and type:
Code:
cd C:\*SDK\platform-tools
adb devices
adb remount
adb push app /system/app
adb push lib2 /system/lib
adb push usr /system/usr
adb kill-server
exit
- Unplug your phone
- Go to ROM Manager application and run Fix Permissions (DO NOT avoid this step, so you dont get FC's)
DONE!
Veronica
Sent from my GT540 using XDA App
It works, thanks Veronica
I've followed your tutorial step by step and it works without any problem. No more FC ...
Thanks Veronica
Nearly There. . .
Followed your guide right through. Only problem I have is the T9 (predictive) won't work, the little T9 button is disabled..... no FC's though. Any thoughts ??
lavero.burgos said:
heres what to do with my file:
TUTORIAL #7
- Dowload and unzip in desktop
- Open System folder and copy the 3 folders: app, lib2 and usr folders to C:\*SDK\platform-tools\
- Plug your phone to the computer
- Open a CMD terminal and type:
Code:
cd C:\*SDK\platform-tools
adb devices
adb remount
adb push app /system/app
adb push lib2 /system/lib
adb push usr /system/usr
adb kill-server
exit
- Unplug your phone
- Go to ROM Manager application and run Fix Permissions (DO NOT avoid this step, so you dont get FC's)
DONE!
Veronica
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
can someone tell me why this method is not working for me ?? i've followed the instructions but.. FC's...
1. Linux(easy)
2. Mac(easy)
3. Windows(medium)
________________________________________________________
1. Linux
You don't need any special drivers for SDK on linux(adb shell), but you don't get fastboot binary in SDK package. To set fastboot for linux follow instructions:
1. Download SDK(this isn't need if you want just fastboot)
http://developer.android.com/sdk/index.html
2. Download fastboot linux binary
http://www.mediafire.com/?ldlovlzi9mx3pbh
3. Copy it to your SDK directory
/path_to_your_SDK_directory/platform-tools
or
if you use fastboot often and you don't want to type cd /path_to_your_SDK_directory/platform-tools, ./fastboot <action> every time, you can do this:
1. Open Terminal and type:
sudo nautilus
to get file browser with root privileges.
2. Copy fastboot binary to /bin directory
Now, just open terminal and type fastboot <action> and that's it?
Copy this file to /etc/udev/rules.d
EDIT:
Code:
sudo chmod a+r /etc/udev/rules.d/51-android.rules
Easy?
______________________________________________________________
2. Mac
I don't have Mac, but it should be like for linux:
1. Download SDK(this isn't need if you want just fastboot)
http://developer.android.com/sdk/index.html
2. Download fastboot Mac binary:
http://www.mediafire.com/?kjozh1q5dyyqhn3
3. Copy it to your SDK directory
/path_to_your_SDK_directory/platform-tools
or
(I don't know that this is possible on Mac, try to change nautilus with Mac's default file browser?)If you use fastboot often and you don't want to type cd /path_to_your_SDK_directory/platform-tools, ./fastboot <action> every time, you can do this:
1. Open Terminal and type:
sudo nautilus
to get file browser with root privileges.
2. Copy fastboot binary to /bin directory
Now, just open terminal and type fastboot <action> and that's it? Easy?
______________________________________________________________
3. Windows
1. Download SDK
http://developer.android.com/sdk/index.html
2. Download Google USB Drivers from SDK Manager
3. After download, there're located in /path_to_your_SDK_directory/extras/google/usb_driver
4. Open android_winusb.inf and add this after [Google.NTx86] or [Google.NTamd64](32 bit or 64bit)
;NVIDIA Tegra
%SingleAdbInterface% = USB_Install, USB\VID_0955&PID_7000
%CompositeAdbInterface% = USB_Install, USB\VID_0955&PID_7100&MI_01
(Here is my modificated android_winusb.inf file here, but it's old and an updated version arrived from Google and it's compatible with 32bit and 64bit)
5. Open CMD from Start>Run and type:
echo 0x955 >> "%USERPROFILE%\.android\adb_usb.ini"
6. Reboot
==========================================================
7. On tablet go to Settings > Applications > Development and enable USB Debugging if it wasn't enabled and connect tablet with computer via USB.
8. Right-click on Computer and click Manage. Identify your device from the list(I think it's Tegra with board icon), right-click it and click Update Driver Software
9. Choose to browse your computer for driver software and then select to pick from a list device drivers on your computer
10. Choose to view all devices and click Have Disk
11. Browse to the google-usb_driver folder inside your Android SDK folder(/path_to_your_SDK_directory/extras/google/usb_driver) and select the android_winusb.inf file
12. If you get any warnings prompts telling you that the driver might not be compatible, just choose to continue installing
13. Once the drivers have been installed, you should be able to use ADB with your device
14. To confirm that your device is recognized, launch a Command Prompt window and enter these commands:
adb kill-server
adb start-server
adb devices
If you see your device name or a few numbers as the output under the list of devices, your device is now recognized by ADB
For fastboot you need to go to /path_to_your_SDK_directory/platform-tools in terminal(cd /path_to_your_SDK_directory/platform-tools) and type fastboot(.exe) <action> and before it to change ADB Interface to ADB
That's it, if you have some complaints, post them.
Bye!!!
EDIT: Changed android_winusb.inf file due error in it.
EDIT2:Changed android_winusb.inf file due error in it again.
echo 0x955 >> "%USERPROFILE%\.android\adb_usb.ini"
shut the cmd say something ? because when i write the command and push enter its just jump to another line and says nothing ???
No. You can go to that file("%USERPROFILE%\.android\adb_usb.ini") and manualy add 0x955 to it.
Sorry!
I cannot connect to this link:http://www.mediafire.com/?kjozh1q5dyyqhn3
Please do me a favor, send fastboot as an attachment to this mail address:
[email protected]
I'll try because I'm not at home, I went to my grand parents and I have really slow internet.
Hello guys I have a problem, the step 5. Open CMD from Start> Run and type:
echo 0x955>> "% USERPROFILE% \. Android \ adb_usb.ini"
I run this step but I open a txt file that says this:
Android # USB Vendor ID 3RD PARTY LIST - DO NOT EDIT.
# USE 'adb Android update' TO GENERATE.
USB Vendor ID # 1 FOR LINE.
0x955
I now do not understand where I write echo 0x955?
/documents_and_settings/[your user name]/.Android(hidden file)/adb_usb.ini
Sent from my Xoom using Tapatalk
Nice guide. Think you forgot the udev rule for Linux:
Create a file called /etc/udev/rules.d/51-android.rules containing:
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0955", MODE="0666"
Without that Linux won't give you write permission to the device.
Ok, I'll add.
Sent from my IDEOS S7 Slim using XDA App
So when I want to use fastboot, I install the Android Bootloader Interface driver? Not the ADB interface driver?
Needless to say I haven't got fastboot working yet but ADB works. One other thing: If I manage to install a firmware and do a wipe and everything works; can it be that I would experiance better performance if I as well managed to to a full wipe with fastboot? I mean, can it flush things that CWM can't? I'm using the latest cyanogenmod (test version) from DerArtem, but I am a bit interested in trying the latest progress of honeycomb...
I have problems with interfaces. On one computer is ADB interface and on other is something else but I prefer linux for doing any job that's connected with android. In theory wiping should be same with fastboot and recovery but, again, I prefer fastboot because it's JUST erase all on data/cache/system partition and recovery might don't have support for other partition types as well as other problems, but I don't say that it can be different.
Thanks. I hope I continue to have a functioning cwm. If it breaks I will have to install Linux
ı do everything but when ı wrote adb devices nothing
Linux or Windows?
Jon2555 said:
Linux or Windows?
Click to expand...
Click to collapse
windows 7 x64
When the tablet is open in USB Debugging mode I can see my device adb devices list but when ı restart my tablet fastboot mode ı can't find
The best slow to install Linux via VM. It complicated on windows, it's different from computer to computer.
Sent from my IDEOS S7 Slim using XDA App
do i type this exactly with all the " ???
echo 0x955 >> "%USERPROFILE%\.android\adb_usb.ini"
????????????????/
HELP PLEASE
No
Sent from my IDEOS S7 Slim using XDA App
When i tipe the echo 0x955 line
It keeps on saying that system cannot find the path specified
can someone please help?
even when i open comand prompt and type adb it says adb is not recognised as an internal or external.........
This thread will help those who are struggling with running the scripts.
Try to clean up the code first - check for errors/bugs, update it!!
You need to root your phone.
First method:
To change permissions use chmod 0755 script.sh
as android/busybox chmod binary does not uses the chmod +x or chmod a+x notation and make sure that su binary is installed i.e phone is rooted
Second method:
Also you must have Busy Box Installed.
Here is the link to Google Play of that busybox app: https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer
Don't install the few latest versions because it is in nightlies.
I use Samsung Galaxy Y and I use the version 1.18.2.
Reboot your phone after installation.
Also you must have script manager installed.
Here is the link to Google Play of that manager app: https://play.google.com/store/apps/details?id=os.tools.scriptmanager
Open Script Manager and give super user access.
Tap on Menu > Advanced Options > Config
Scroll down until you see Browse as Root
Tap on it and press the back button to save
Once again grant Script Manager SuperUser Access to save config
Exit Script Manager
Now again open Script Manager and browse for your script file (name_of_the_script.sh)
Tap on it and set properties to:
Favorites (Star Icon)
Root (Green Android Skull Icon)
After setting properties, tap on Run to execute the script installer.
When executed, it will do initial test, be patient and wait for it to complete its tasks.
If it shows errors that your phone is not rooted and the app doesn't have root permissions, then,
Sometimes, some methods are better than using terminal.
Download a root checker app from the play store and check whether your phone is really rooted.
If no, try to root again by following tutorials on xda.
If yes, update su binaries.
Also go to settings / preferences of superuser app, and click automatic response and then select 'allow'.
If you want to get yourself with terminal emulator commands, then see the following link
http://forum.xda-developers.com/showthread.php?t=1979909
If you are trying to copy a script from sdcard to internal memory, you can do that in three ways AFAIK:
copy the file via terminal
copy the file via file manager apps
copy by making a edify script and flashing it
If you are trying to run a script, you can do that in two ways AFAIK:
copy the file via terminal
copy by making a edify script and flashing it
Download Android Terminal Emulator from Google Play: https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en
Goto Preferences in terminal and select Initial Command and enter "su" and save it
Also Change the terminal type to "linux" when you are using linux type commands.
Press thanks if I have helped.
I just want to tell you, I also have SGY and Busybox version 1.21.0 and 1.20.x work fine.
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
can you plz try to run this script!!
https://www.dropbox.com/s/8atidhjswrts7qe/yamas.sh
This guide will help you to get rid of Kaspersky and unlock your locked mobile phone in case you don’t remember your pin/unlock code. It describes how I've done this when forgotten unlock code. Everything wrote below is based on online search and experiments with my phone. You just need basic computer knowledge and follow steps below. It works great on my Samsung Galaxy S3 Mini (GT-I8190N) with Android 4.1.2 onboard. Good luck.
IMPORTANT !!!Search online how rooting may affect your mobile phone warranty and do not continue if warranty is more important for you then your data. Phone can be unrooted as well, search online…
Using this method WILL NOT delete any other of your data, apps, contacts, SMS, etc.
Getting root access
Steps listed below are based on this website (sorry, can't post links, please send me PM if you need them). There are also links to necessary software but my advice is to search online for latest version. You need SD Card to install software and for system backup (more GB card has more backups you can make).
Software needed
1. Download Samsung USB Drivers and install them on your computer
2. Download Android SDK and unpack to your hard drive
3. Download ClockworkMod ROM Manager
4. Download ODIN and unpack to your hard drive
5. Download SuperSu
Getting root access (it is more convenient to open phone for better access to battery)
6. Pull battery out and refit (or switch phone off)
7. Press and hold Volume Down + Home button + Power button for few seconds to enter software download mode
8. Press Volume Up button when you see warning message screen to continue
9. Connect USB cable to your phone and computer
10. Unzip (if necessary) ClockworkMod ROM Manager to have .md5 file
11. Run ODIN. Make sure Auto Reboot and F. Reset Time options are ticked. ODIN should show the message confirming connection to device (bottom left) and COM port ID (top left) if not repeat steps 6-9
12. Press PDA button and browse to unzipped .md5 file and then press Start button
13. Phone should reboot after software installation is complete
14. Copy SuperSu .zip file to SD Card, pull battery out and enter card into the phone. Refit battery
15. Press and hold Volume Up + Home button + Power button for few seconds to enter ROM Manager (ClockworkMod Recovery)
16. Select install zip from sdcard ==> choose zip from external sdcard ==> browse to SuperSu zip file and confirm installation when prompted
Backup and software modification (based on this website, sorry can't post links, please send me PM if you need them)
17. Repeat step 15 if needed to run ROM Manager than choose backup and restore ==> backup to external sdcard and wait till process is finished (this is copy of all your existing software, data, SMS, etc.)
18. Choose mounts and storage option then select mount /data (if you need go back option is always at the bottom of menu)
19. Press Win+R or Start-->Run… and type in cmd to run console
20. Browse to adb.exe file (it is located in SDK folder ex. C:\adt-bundle-windows-…..\sdk\platform-tools\) using cd folder name command ex. cd platform-tool
21. Type in adb shell and press ENTER
22. Navigate to /data/app folder using cd /data/app command
23. List files using ls –a –p command (press ENTER after each command used in console) and find kms file (I have com.kms.free-1.apk file)
24. Delete kms file using rm com.kms.free-1.apk command
25. Navigate to /data/data folder using cd /data/data command
26. Repeat step 23
27. Delete kms folder using rm –r com.kms.free command (make sure –r parameter is entered in command)
28. Navigate to /data/dalvik-cache folder using cd /data/dalvik-cache command
29. List files using ls –a –p command and find kms file (I have [email protected]@[email protected] file)
30. Delete kms class file using rm [email protected]@[email protected] command
31. Navigate to /data/system folder using cd /data/system command
32. List files using ls –a –p command and find locksettings.db files
33. Delete locksettings files using rm locksettings.* command
34. List files using ls –a –p command and find packages.list and packages.xml files
35. Run new console window (step 19) and navigate to adb.exe file (step 20)
36. Type in adb pull /data/system/packages.list and press ENTER (file will be copied form your phone to PC's hard drive into …\platform-tools\ folder, always where adb.exe file is located)
37. Type in adb pull /data/system/packages.xml and press ENTER (file will be copied to same folder as in step 36)
38. Open folder with packages files and edit them using any of text file editor (Notepad, TextPad, etc.)
39. Inside packages.list file search for kms and delete each row containing it. Save file when done
40. In packages.xml file search for kms and delete each row containing it. IMPORTANT!!! In this file you will find sections starting with <package> tag and ending with </package>. One section includes kms. Select and delete entire kms section including corresponding <package>…</package> tags. Save file when done
41. Switch to second windows console opened in step 35 and send files from PC into phone using adb push packages.xml /data/system and adb push packages.list /data/system commands
42. Press reboot system now in your ROM Manager or pull out and refit battery to switch phone off and then switch it on
Enjoy and NEVER GIVE UP!!!
If you have any questions please post them and I'll try to help as much as I can.
You'll either need root or a custom recovery to do this, but as not everyone wants root.
1. Here's how you do it with TWRP, a USB cable, and a PC with ADB:
2. Root (easiest method)
Method 1
Boot your device into recovery
2. Mount your system by going to Mounts > Tick System
3. On your PC open a command line, somewhere like your desktop is useful
4. Type the following command:
HTML Code:
adb pull /system/build.prop
5. Open the build.prop file with your favourite editor, I recommend using Notepad++ on Windows
6. Find the "ro.build.type" line
7. Change the text after = to "userdebug" from "user"
8. Save the file in Notepad
9. Go back to the command line and enter the following command:
HTML Code:
adb push build.prop /system/
10. Now open a shell doing:
HTML Code:
adb shell
11. Now a adb shell will open, enter these commands:
HTML Code:
cd system
THEN
chmod 644 build.prop
12. Reboot the device as normal
13. When the device has booted, go to the developer options
14. Scroll down to the bottom of the "Drawing" category
15. Enable multi-window and have some fun!
METHOD 2 -Root
This is the easiest way
1. Go to google Play Store
2. Find BuildProp Editor by JRummy Apps and install
3. In the app, locate Ro.Build.type
4. Change "user" to "userdebug"
5. Then Reboot from the App (normal reboot)
6. Go to developer options, scroll down until you see enable multi window view
Good Luck
All credit to Quinny899
Can you provide a screenshot? I don't want to do anything that might possibly damage my device.
Can confirm that this works!
I have just tried it.