Please if someone own this version I need it very because my hardware keyboard id dead, and I want to send my X10mini pro back to my dealer, and this version was on phone when I bought it.
Without this version they wont accept my warrnity!
I tried searching for it everywhere but can't found nothing!
HELP!
Flash your phone via sony ericsson update service, your phone updated to android 2.1, baseband ...015.
Only way is with flashtool, but you need the android 1.6 .sin or .ftf files and i don't know where to get those.
I won't believe that they only take it back in version 1.6. version 2.1 is an official release and thus they should take it back for warranty issues.
sent with my x10 mini pro
Lol so not true its unreal who told you that pmsl
Snoopo said:
I won't believe that they only take it back in version 1.6. version 2.1 is an official release and thus they should take it back for warranty issues.
sent with my x10 mini pro
Click to expand...
Click to collapse
Hi..and thx for replay.
The problem is that my phone haven't update from SEUS.
I try more times to flash from v1.6 and SEUS said that I have the last version on my phone (in my country).
I read om few forums that people complain that SE won't make update for our country and they have not courage to flash with other ROM because of warranty..
Because of that I looking for this version of ROM!
I have a backup of this version but no way to install it back because of Xrecovery version. I made it with lower ver than v0.3 and now everytime I restore it back it stayed on Sonyericsson logo.
Its not a update and were not talking about pc companion we are talking about se update centrer ,,,its diferent it works every ware on all sony phones check it out again
kormatoes said:
Its not a update and were not talking about pc companion we are talking about se update centrer ,,,its diferent it works every ware on all sony phones check it out again
Click to expand...
Click to collapse
I know that we talking about SEUS update center..Who mentioned PC Companion?
Now when I broke up my warranty, a I can to upgrade to 2.1.1.A.06 from any version!
But with version 1.6 (I tried once mounht ago) I can not!
As as mentioned in post above, I found lot of post from serbian forum where people complain the SEUS updater have not newer version for our country!
When you try to update it comes the message from SEUS: You have the latest version!
Related
I just saw in the SE blog tht the ppl are sayin they updated their X10 to Firmware 1.0.16??
I got 1.0.14 and my updateservice says my phone is up2d8?
other guy on the blog sayed it improved the X10 a lot..?
can anybody here update?
check.. http://blogs.sonyericsson.com/produ...rch-program-started/comment-page-17/#comments
"Rami says:
April 2, 2010 at 4:28 pm
@ Greg
Just connect the phone (X10) to your PC and it will pop up with different installations. Install the Sony Ericsson PC Companion and it will tell you that there’s an update ready.
Then follow the instructions. This is a firmware update!
That worked for me!
My version is 1.0.16"
My phone allready have 1.0.16... (not upgraded it)
I also want it !
hhhmmmmmm, the fun that ill have come tuesday!!
Yes there is a 16 update around and no i can't update to it either...maybe it's generic vs carrier again - that's why we need root/custom roms!
I've got the .16 upgrade on my phone, I don't notice much of a change though.
firmware update
hello,
i am from india and got my phone on the 1 april black.yes there is a firmwre upgrade,upgraded it to 1.6 from 1.4
viranchi17 said:
hello,
i am from india and got my phone on the 1 april black.yes there is a firmwre upgrade,upgraded it to 1.6 from 1.4
Click to expand...
Click to collapse
even iam from india iam on .14 but whenever i check it states "firmware is upto-date".
Just upgraded mine from 14 to 16 last night by using Sony Ericsson Update Service. This is a baseband firmware update, so you won't be able to update via Android's update firmware feature.
Hello, in france, via SEUS the latest FW is still the 1.0.14. And I still have poping and cracking. Hope the 1.0.16 solve this issue.
Best regards
I'm located in Belgium and I also can't update to .16 software.
boy does this phone need 2.1!!!!!!!!!! its a gonner without it i am afraid. functionality and stability from 2.1 firmware will bring out the beast in this phone. 1.6 right now is too limited for what this phone is capable off so SONY dont let us wait too long! i know min issue would be adding media and timescape to 2.1 but it needs to be done!
Mine is a Vodafone UK Handset, SEUS is saying mine is up to date.
Model X10i
BaseBand. 1.0.14
Kerbel Verison. 2.6.29-rel
Build No. R1FA014
C987 said:
Mine is a Vodafone UK Handset, SEUS is saying mine is up to date.
Model X10i
BaseBand. 1.0.14
Kerbel Verison. 2.6.29-rel
Build No. R1FA014
Click to expand...
Click to collapse
mine is o2 uk and its on 1.0.16
shingers5 said:
mine is o2 uk and its on 1.0.16
Click to expand...
Click to collapse
Looks like Vodafone are lagging with a firmware release.
Andy
Go to Sonys webbpage, dowload and install the software update service, follow the guide for X10 and install the latest update. It is easy to do and the last firmware is 1.0.16
Any Q?? you just ask.
Regards.
strix75 said:
Go to Sonys webbpage, dowload and install the software update service, follow the guide for X10 and install the latest update. It is easy to do and the last firmware is 1.0.16
Any Q?? you just ask.
Regards.
Click to expand...
Click to collapse
Ive done all that, it says my phone has the latest firmware on it. Currently i have firmware 1.0.14
Is this another delay with Vodafone being slow to release software?
No this is Sony Ericson soft and has nothing to do with Vodaphone. I just ran the program my self and had no problem at all. Just try it again.
C987 said:
Ive done all that, it says my phone has the latest firmware on it. Currently i have firmware 1.0.14
Is this another delay with Vodafone being slow to release software?
Click to expand...
Click to collapse
strix75 said:
No this is Sony Ericson soft and has nothing to do with Vodaphone. I just ran the program my self and had no problem at all. Just try it again.
Click to expand...
Click to collapse
It has more than you think. If the phone is branded then Vodaphone has to approve the update before it can be delivered through SEUS.
This is the same issue i'm facing with 3 Denmark, the phone has ONE extra app(3MobileTV) BUT that means that 3DK has to approve ALL software updates from SE before it can be installed...
This is why we desperately need root/custom roms
Ok, thank´s for updating me on that. But i still think it´s strange.
Trekster said:
It has more than you think. If the phone is branded then Vodaphone has to approve the update before it can be delivered through SEUS.
This is the same issue i'm facing with 3 Denmark, the phone has ONE extra app(3MobileTV) BUT that means that 3DK has to approve ALL software updates from SE before it can be installed...
This is why we desperately need root/custom roms
Click to expand...
Click to collapse
So, as most of us went to Nordic 2.1 x10 mini pro update I would like to get back to 1.6 (preferably to original O2 Germany version but any version will do).
I have tried editing build.prop in 2.1 to values 1239-2971 (these values were from my original build.prop in 1.6) but SE Update Service says that there is no new updates. I guess that this doesn't work anymore
So, is there any old software backup of 1.6 available for downgrade?
Try deleting the db folder in /Update Service inside your program files
That doesn't work.
I could try putting 1.6 build.prop (original one that I had before editing and updating) but I am afraid not to brick my phone.
Is this safe to do?
Totalno_LooD said:
That doesn't work.
I could try putting 1.6 build.prop (original one that I had before editing and updating) but I am afraid not to brick my phone.
Is this safe to do?
Click to expand...
Click to collapse
Don´t do this. I tried it already. Doesn´t work, and will put your phone in a boot loop.
Totalno_LooD said:
So, as most of us went to Nordic 2.1 x10 mini pro update I would like to get back to 1.6 (preferably to original O2 Germany version but any version will do).
I have tried editing build.prop in 2.1 to values 1239-2971 (these values were from my original build.prop in 1.6) but SE Update Service says that there is no new updates. I guess that this doesn't work anymore
So, is there any old software backup of 1.6 available for downgrade?
Click to expand...
Click to collapse
May I ask why you want to go back to 1.6? Is there something not right with the 2.1 upgrade?
I don't have it yet and am not sure if I want to upgrade if it is so hard to downgrade.
________________________________
edit: I have found the list of issues with 2.1. I will follow this thread to find out how to downgrade if I'm not satisfied with 2.1.
thekindladies said:
May I ask why you want to go back to 1.6? Is there something not right with the 2.1 upgrade?
I don't have it yet and am not sure if I want to upgrade if it is so hard to downgrade.
Click to expand...
Click to collapse
I´ve paid to Davinci to downgrade to 1.6 because of the keyboard issues. I use Palm Graffiti in portrait mode and with my physical keyboard already being german, having Swedish layout on top of it was too much. Will wait for German update to be available. Otherwise no problems at all, only benefits - better battery handling in 2.1 etc.
Ok, thanks for letting me know.
It doesn't have any big problems, but as vlissine said there is this annoying thing with the keyboard. And as german update to 2.1 is coming out soon I would like to get back to original 1.6 version.
Also, I don't know is there any difference in Marketplace between countries. For example one application could be present on german version, but not on nordic.
At first glance there is not that much big of a difference so that you MUST switch to 2.1 immediately, except if the nordic version is suitable for your use.
Hm, no, I'm not planning to go nordic, I will wait for the update to come to Belgium.
u should try omnius instead of davinci. they charge per day of use rather than per flash and its cheaper
knk1990 said:
u should try omnius instead of davinci. they charge per day of use rather than per flash and its cheaper
Click to expand...
Click to collapse
I did omnius when I unbranded my phone. This time I used Davinci just to compare. Omnius has one disadvantage - you have to chase their dealers to get credits credited onto your account while at Davinci it is straightforward and immediate.
Also charge per day might be interesting for those who want to flas a bunch of phones, not just one. But I agree omnius is cheaper and is as good as.
Totalno_LooD said:
And as german update to 2.1 is coming out soon I would like to get back to original 1.6 version.
Click to expand...
Click to collapse
When Locale updates arrive, changing your build.prop to your generic one, and then using SEUS to repair your phone would do the trick. You will be changed to your local 2.1
li_boud said:
When Locale updates arrive, changing your build.prop to your generic one, and then using SEUS to repair your phone would do the trick. You will be changed to your local 2.1
Click to expand...
Click to collapse
I tried just to test to change Nordic into Russian by using this technique. Didn´t work.
I manage to downgrade to 1.6 for FREE. lol
Just download the FW for u20i NL 1.6 here > http://forum.xda-developers.com/showthread.php?t=827273 and use the Flashtool from Binary's post.
Thanks zanndoth, this worked for me very well.
Unfortunally it doesn't works for me. Did al the steps (downloading flashtool etc.) but when I startup my phone I get the animating splash screen en after that a 'frozen' SE logo.... Still there after 15 minutes... Can someone help?
Ok, finally, after waiting longer, it finally works.
Thanks to you all!
Hi there to everybody.
I have an x10. I rooted it a while ago. Installed xrecovery, busy box and finally custom ROM. However now, I want to get back to the android 2.1 to make it ready for an update to android 2.3 via PC companion, but the problem is, I don't know how to get back to the 'factory settings', I mean those real ones, cuz when I click restore factory settings it just removes all the stuff from my phone and leaves me with the custom rom. PC companion is not working either for a repair. I don't really know what shall I do.
I was trying to find a thread like that but I could not find it.
cheers
http://forum.xda-developers.com/showthread.php?t=920746
Flash 2.1 firmware with the flashtool, or use SEUS to get back.
Do u have a backup of ur original rom in xrec. What I did was wipe the usual and restore my se backup then let sues do its stuff
Sent from my X10i using XDA Premium App
thank you very much for the reply. I think there is no backup with xrecovery cuz when I reset the phone and start xrecovery (the one where you use sound buttons to navigate) and i click factory reset, it resets the phone to custom rom. I think that flashtool will do it as I understand. I will give me the original software and it will let me to unroot the phone so I can easily upgrade the phone to android 2.3 via pc companion. That's what I understood and I hope it is right .
btw, in that link that 'hasei' posted, there is a list of generic firmwares. Does it mean if I just download and install 'Generic version 2.3.3 build 3.0.1.G.0.75' using xrecovery and is it the same as android 2.3 installed via pc companion. Is there any difference? Is any of them any better from the other? Is it identical to the one made by sony ericsson? Cuz I think that what the word 'generic' stands for. Sorry for the silly questions but I wanna make sure and I will appreciate any answers.
I just installed 2.1 firmware using flashtool, so there is 2.1-update1 installed. However using pc companion I still cannot upgrade my software to 2.3 using pc companion. Don't know what to do.
n0rbas,
"Generic version 2.3.3 build 3.0.1.G.0.75" is the SE's official 2.3 firmware. "Generic" only means that it's not carrier-branded and nothing was added by a carrier. I guess you could say "pure" Sony Ericsson.
If you are not hell-bent on upgrading the firmware through PC Companion, you can flash the 2.3 firmware through the flashtool, just as easy as you did 2.1. I would take this route if I were you.
hasei said:
n0rbas,
"Generic version 2.3.3 build 3.0.1.G.0.75" is the SE's official 2.3 firmware. "Generic" only means that it's not carrier-branded and nothing was added by a carrier. I guess you could say "pure" Sony Ericsson.
If you are not hell-bent on upgrading the firmware through PC Companion, you can flash the 2.3 firmware through the flashtool, just as easy as you did 2.1. I would take this route if I were you.
Click to expand...
Click to collapse
thank you for the reply.
I tried to do it, but that 2.3 version is not the one provided by sony ericsson, the graphics is different, I just want to be able to install the sony ericsson one and cannot even If I have a 2.1, it says that it is up to date when using pc companion. Shall I unroot the phone or what? I have no idea.
http://forum.xda-developers.com/showthread.php?t=1186045
It really depends on what version of X10 (X10i or X10a) you have and where you are. There are so many kinds of 2.1 firmware, branded or otherwise. You just have to have the right combination of a customization number/unrooted 2.1 firmware to upgrade through the official means.
I don't know what you meant by "the graphics is different," but with all due respect, you are incorrect. All the firmwares shown in that flashtool thread are unchanged sony ericsson ones. But if you think it's different, go with the PC Companion thing by all means.
If you have an X10a, it will be a long wait if any.
Ok, i checked it and it is apparently not out yet for my version. What I mean by the graphics. When you unblock the screen with the slider, the 2.3 has got the new one, the nice one and the one I installed it as a firmware has the 2.1 slider. There are many kind of things that are not in generic 2.3. To be honest I want 2.3 for its graphics. I will try to find 2.3 somewhere else and install it. If it won't work I gonna wait. cheers
As the topic says...
For some reason when i open PC companion it says that i dont need any update and if i use reinstall function it installs me 2.1.1.A.0.6
how to get latest firmware officialy?
i have found at xda 2.1.1.c.0.0. but provided links do not work
Pc companion or SEUS can be terrible if your mobile phone provider hasnt given the all clear for the software update. Sadly some havent, mine reverts to 1.6 (donut) if I use PC Companion so I doubt the phone provider ever will! (my provider states its Sony Ericsson and Sony state its the phone provider - complete non responsibility). The only option is to trawl xda forums for links and flash using flashtool. Hopefully someone will provide a link..
I understand that and here is a funny thing...
some months ago i was only getting 2.1.1.C.0.0 via SEUS or PC Companion till i flashed to older version so i could install gingerbread
And a funny thing, i tried to resintall software thro SEUS and PC Companion few times and all was older 2.1.1.A.0.6 but not only that, every time Keyboard layout was different
Now i have Azerty keyboard instead Qwertz or Qwerty
Please, do not post questions on dev section !!
Theres an question and answer section itself !!
I'd like to restore the stock 2.3.3 ROM on my X10, but SEUS (or SUS now) doesn't support this model anymore. Is there any other way to do it?
It did five days ago, as I just reset my XPERIA X10i phone.
Admittedly, I didn't download a new version of SUS, but just used an existing version that does check for current version.
Used it to upgrade an XPERIA M a month ago, so know it's latest version.
[Update]
Sony Update service.
Sent from my LT26i using Tapatalk
Could you provide the source of your SEUS setup (or if you are somehow in possesion of the setup file, could you upload it for me)? I'd be awful grateful.
i've already unlocked the bootloader, and i'm using a custom miui rom..
any idea how to flash it back to stock rom?
I've already given it a try, but there's no option for X10.