Can someone give me FULL instructions for flashing this coming from Miui AOSP, without Odin? From flashing the Rom to installing the google apps (dont know how to)... I havent flashed a WHILE. Thanks guys
im assuming you have rom manager installed for this and the rom you want installed (trigger redux) is at the root of your micro sd .... once you have those done follow the steps
1. in rom manager hit flash clockworkmod recovery then pick vibrantmtd then pick 3.x.x because we are on gingerbread
2. hit install rom from sd card and find the rom's zip folder and select it afterwords something else will pop up with 3 0ptions, put a check on all 3 (backup rom, wipe data and cache and dalvik cache) then hit install
BY SELECTING WIPE DATA AND CACHE YOUR APPS AND STUFF WILL BE GONE WHEN THE NEW ROM BOOTS UP SO MAKE SURE EVERYTHING YOU WANT IS BACKED UP
IF WIPE DATA AND CACHE IS NOT SELECTED THERE IS ONLY A SLIGHT CHANCE THAT YOU WON'T HAVE TO use ODIN!!
http://www.appbrain.com/app/app-backup-reinstall/tw.nicky.AppBackupReinstall
this link has an app that backs up all your apps to your sd card or you can use titanium back up to back up everything
I went from Muiu to redux and what I did is this: (might be overkill but its what I did and everything worked great)
1. Reboot into recovery
2. clear data/factor reset
3. mounts and storage > format system, format data, format cache
4. install zip from sd card > trigger redux
5. install zip from sd card > gapps
6. advanced > wipe dalvic cache, fix permissions
7. reboot
8. let rom boot up and sit for 10 mins and reboot
9. enjoy
That is the correct way ...Guy above ...
Sent from my GT-I9000 using XDA App
Related
I am currently using mik_os 6.5(http://forum.xda-developers.com/showthread.php?t=946354) and Clockwork Mod recovery. I tried to install 6.5.2 on top of it (wiping cache and dalvik cache) but it gets stuck on the lg logo. After going through the first post, I even formatted /system but that didn't help either.
Finally, I flashed 6.5 and it is working fine. Any pointers would be helpful.
1) mounts and storage/ wipe cache
2) mounts and storage/ wipe system
3) wipe cache partition
4) wipe data or factory reset
5) install zip from sd card
And blowww!! You have 6.5.2 flashed ;-)
Sent from my LG-P500 using XDA Premium App
casanovaredefined said:
I am currently using mik_os 6.5(http://forum.xda-developers.com/showthread.php?t=946354) and Clockwork Mod recovery. I tried to install 6.5.2 on top of it (wiping cache and dalvik cache) but it gets stuck on the lg logo. After going through the first post, I even formatted /system but that didn't help either.
Finally, I flashed 6.5 and it is working fine. Any pointers would be helpful.
Click to expand...
Click to collapse
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
wipe data/factory reset
wipe cache partition
mount and storage-format system
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot!
just remeber to backup all ur app using titanium and restore after a fresh install and whnever u update no need to wipe anything just flash over the old version until unless mention by the dev
I didn't want to do a factory reset, however; I still went for it after doing a nandroid backup.
I followed all the steps mentioned by sshbz, but it still got stuck at the boot logo (the one with website address written).
Finally, thanks to the Nandroid backup, I reverted back to 6.5 without having to go through titanium restore.
For 6.5.2, the rom link is given in post 1 and mik_os had also posted a fix for clockword mod users.
I have tried the below
1. Install only the rom
2. Install rom and then the fix
Neither worked. I think I would have to wait for the next update now unless someone can make this work for me.
I just want to be 100% sure I am doing this right when it comes to flashing roms and kernals to my evo 3d. I have only flashed once and it was the last update on the evo.
Here is what I can remember
-Back up everything apps and all
-Put zip file on root of memory stick
-Boot into recovery
-Do a factory reset
-Clear cache
-Click install zip from sdcard
-DONE.
Am I missing anything and is this the same for kernals and roms?
.TeeJay. said:
I just want to be 100% sure I am doing this right when it comes to flashing roms and kernals to my evo 3d. I have only flashed once and it was the last update on the evo.
Here is what I can remember
-Back up everything apps and all
-Put zip file on root of memory stick
-Boot into recovery
-Do a factory reset
-Clear cache
-Click install zip from sdcard
-DONE.
Am I missing anything and is this the same for kernals and roms?
Click to expand...
Click to collapse
Well, what you've got there is pretty accurate for flashing ROMS. The only thing I'd add in there is to create a nandroid backup when you boot into recovery, before doing your factory reset. You also want to wipe dalvik cache along with your cache.
To flash a kernel, you do NOT wipe data (factory reset). Skip on that. For a kernel flash, you only want to wipe cache and dalvik cache, flash the kernel, tehn reboot.
Yea sounds great I usually repeat the wipe process three times just to make.sure.
Sent from my PG86100 using XDA App
so when flashing a kernal I do similar to rom
-copy file to root of sd card
-reboot in recovery
-wipe cache and dalvik
-install zip from sd card? or is it update from sd card?
It's install .zip But ya, sounds like your doing it right!
And you don't have to copy the files to the root of the sd card. If you download the roms straight to your phone they will download in your downloads folder. I just leave them there. Twrp gives you a menu where you can pick what folder to flash from.
Sent from my PG86100
thank you guys, this site never fails
I am Fu fusing with this and I had 3 question
1. before I install cm7 I have to wipe cache and data???
2. After flash cm7 I flash the gaps???
3. Before install Franco.kernel I should wipe datanand cache again??????
Th3-Famous809 said:
I am Fu fusing with this and I had 3 question
1. before I install cm7 I have to wipe cache and data???
2. After flash cm7 I flash the gaps???
3. Before install Franco.kernel I should wipe datanand cache again??????
Click to expand...
Click to collapse
1. YES... IT COMPULSORY
2. Yes, if not ur market and google services wont work
3. Just wipe dalvik cache and cache for safety...
Sent from LGE XDA phone
Do a clean wipe on everything ie factory reset/wipe cache/wipe dalvik/wipe everything than flash the ron. In your case cm7 than go to advanced in clockworkmod select reboot recovery than flash gapps then after all is done boot into recovery and flash Franco's kernel. I recommend wiping everything besides factory reset than reboot. Look at sweetnsours signature he uses 6.6.1 with the .35 family tree kernel. Anymore questions just PM me
Sent from my LG-P500 using XDA App
here i am with my signature
Thanks now i am not confuse!!
I am preparing to flash mik's 6.6.1 (CM7.1-RC1) - GB 2.3.5 from Froyo.
Please clarify whether it is necessary/must to format the SD card in Clockworkmod Recovery according with the steps stated in http://forum.xda-developers.com/showthread.php?t=1038338&page=6, i.e.:
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
wipe data/factory reset
wipe cache partition
wipe dalvik cache
mount and storage-format system
go to mount and storage-format sd card
advanced-partition sd card-choose 512 mb (preferable)or 1024 mb (it automatically creates ext 4 partition, class 6/4 is preferred)
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot
Please note that I had already re-arrange my SD-card partition (1GB is assigned for EXT4, and the rest is FAT32) by MiniTool Partition Wizard Home Edition. As far as I understand wipe data/factory reset, wipe cache partition, and wipe dalvik cache have already deleted everything in the phone and SD-card (even whatever stores in FAT32 partition.
Many thanks!!!
I have a plenty of force close problem with almost all of my installed apps, the initial apps from this ROM won't have this problem.
May I know what is the problem? I believe I have correct partition my SD Card and flash the ROM with correct steps...have tried to flash it many many times dy...
Information:
device : bravo(desire) S-OFF
sd card : Sandisk 8GB Class-4
hboot : CM7 r2
recovery : 4EXT Recovery Touch 1.0.0.3 Beta 7
radio : 5.17.05.23
rom : Runnymede AIO 5.0 Special Edition
Partition my SD Card via 4EXT Recovery:
1) tools -> partition sd card -> remove all partitions and start from scratch
2) choose "1024MB" for 1st partition
3) choose "skip" for 2nd partition
4) choose "skip" for swap partition
5) choose "EXT4"
6) check partition aligment
Rom Installation:
Choosen AD2SDX
Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (except sdcard)
Can please help help me =.= I like this ROM very much
anyone help help me ?
Try without a2sd. It causes a lot of fc issues
Sent from my phone to your eyes
you mean choose APP2SD instead of AD2SDX?
if use APP2SD,the storage is very low o...
my force close happen after few hours use, have to reboot again when everytime force close...
by the way u using APP2SD type?
No I don't. I don't even own that device. Just giving you some general tips
Sent from my phone to your eyes
I had same problem, but what i did is that,
I used "MiniTool Partition Wizard Home Edition" it is free working on windows. I used it to
1- remove all the partition from my sdcard, then
2- do a partition using 4EXT as a (primary) with 1250MB. and move it the back of the sdcard. (you will know that when you use the MiniTool program).
3- do a partition using Fat32 as a (primary) with the rest of space, you may note extra blank area usually 8MB, that fine just forget about it .
4- upload all the roms you like to the Fat32 part of your sdcard.
5- Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (data, system ...etc) (except sdcard).
then install your ROM.
It works with me from the first time and I didn't get any error.
It you get any error after that. take the battery out for few minuses and repeat the wipe step, 2 times for every thing before you install the ROM.
Good Luck and Greeting from Saudi Arabia ..
Hello to all,
My friend told me that he was going to do a "deep cleaning of the phone" before installing a new ROM.
I could not understand what is it, I used to do the following before installing a new ROM In recovery mode:
1. Wipe data/Factory Reset
2. Wipe cache partition
3. Format Cache
4. Format System
5. Format Data
6. Format Secondrom_Cache
7. Format Secondrom_Data
8. Format Secondrom_System
9. Format External Storage
10. Format Internal Storage
11. Wipe Dalvik Cache
12. Wipe Battery Stats
Is this a correct way to have a clear Phone before flashin a new ROM?
Thanks
Seems to be a little to many steps to me. My normal way is to just wipe data/factory reset
This is what I see on the Recovery, now I'm running RR ROM JB 3.0.3 but I think is to unstable yet and want to go back to ICS, so if I did all this cleaning all the error report that it gives me know should not be on the ICS, plus is it possible that an app can be corrupt and continue to give me error because I restore it using Titanium?
you just need to
1. Wipe data/Factory Reset
2. Wipe cache partition
and you are done
I am using RR ROM JB 3.0.3 and it runs stable i have only done factory reset.
Sent from my GT-I9100 using xda app-developers app
I'm having problems with Viber that continues giving me error report, the bluetooth of my xbox 360 doesn't works with music, but there are thread about this, and I see a lot of lag, changing pages on the homescreen, and i'm running at 1.6 ghz.