Can someone assist?
I was going from bionix V, and decided to Odin back to stock. I used pit 512 and a kernel here - the last one on the list (stock+froyo uvkb1) on this post - forum.xda-developers.com/archive/index.php/t-870480.html
I flashed the kernel here as the pda in Odin. I thought this was the right way to go, but instead, I'm now stuck in an infinite recovery loop where I can't reboot and can't flash any thing else. I just boot into recovery over and over again. I've mounted the drive, deleted all the files, added back in backups, and tried to flash a ton of stuff, but I keep getting this error:
E: can't mount /dev/block/stl11 ( file exists)
E:cant mount CACHE: recovery/command
cant mount cache:recovery/log
cant open cache:recovery/log
re-partition, auto reboot, and f.reset time were all checked in odin, but nothing else.
Oh, and I can't just use odin to restore - I cannot get into download mode using either the three button method or the adb method.
Can anyone help? I seriously don't want to have to go buy another phone - mainly because I can't really afford that sort of thing.
EDIT: Appreciate people helping here - just to clarify, I don't need help with 3 button method or adb into download - those methods aren't working.
There are 4 ways to get into download that I know of and 3 are on the phone itself.
1. Power down. Insert USB. Hold down vol up / vol down, and hold power until phone starts to boot. Let go of power and hold down volume until download starts.
2. Using a command prompt and ADB, tell the device to reboot into download.
3. Reboot into download via the CWM recovery menu.
The 4th way is the homemade jig, which I don't have the tools to create at the moment. However, I may try it shortly here.
I've tried all 3 of the ways above, and I'm stuck in a boot loop. I'm also unable to disable voodoo.
Does anybody know anyway to do a full on clean reset of the phone with Odin, nandroid, etc? The issue is, all of these methods on the boards would work if I could get into download, BUT, the phone won't mount the proper files for whatever reason (error code in original post) and so I cannot get into download, the home screen, nothing but the cwm recovery menu.
You should get in to download mode and odin stock jdf, those files you flashed are froyo builds. I don't think it work's that way, you must flash jdf first.
I know I need to do that - problem is, I can't get into download mode. That's step one - I'm stuck in the cwm recovery menu, over and over, and can't get anywhere else. Any ideas?
Try this
how to put in download mode- sure fire way
1- phone off
2- open Odin
3- hold vol button and plug in USB.
I just posted a thread. My phone just keep going to DL when I switch battery.
Thanks, but no - that method isn't working. There are 4 ways to get into download that I know of and 3 are on the phone itself.
1. Power down. Insert USB. Hold down vol up / vol down, and hold power until phone starts to boot. Let go of power and hold down volume until download starts.
2. Using a command prompt and ADB, tell the device to reboot into download.
3. Reboot into download via the CWM recovery menu.
The 4th way is the homemade jig, which I don't have the tools to create at the moment. However, I may try it shortly here.
I've tried all 3 of the ways above, and I'm stuck in a boot loop. I'm also unable to disable voodoo.
Does anybody know anyway to do a full on clean reset of the phone with Odin, nandroid, etc? The issue is, all of these methods on the boards would work, BUT, the phone won't mount the proper files for whatever reason (error code in original post).
I really appreciate you trying to help, it's the right answer for a lot of issues, but just not this one.
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
What if you can get in dl mode but odin won't read your phone? I have the correct drivers intalled. It was working fine til I upgrated to cm7. Now my phone is stuck at vibrant screen and can't get in recovery. The phone boots in dl mode but its not recognized by my pc. Any ideas if I'm screwed?
Sent from my Htcclay FastTest using XDA App
Related
btw: super noob here
ok so i am getting this error and i dont know why
i rooted my phone and when i tried to upgrade to 2.2 (using odin) i got this:
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Can't mount SDCARD:
it takes me to recovery mode and just stays there with 5 options (reboot, apply sd card: update.zip, wipe data/fact. reset, wipe cache, format internal sd).
the worst part is that i found out (after research, as thus i could be wrong) that i must have somehow gotten euro firmware because my up key moves down in recovery mode and my power key isnt the "ok" key used to select anything in this damn menu!!!
ive only rooted my phone...and i got the regular update.zip (saved to internal like instructed) like everyone else (i think) + tethering and set cpu (saved zip to my external sd card)
so....i cant exit recovery mode, i cant even select any of those 5 options
i can turn off my phone, but it immediately goes back to the recovery page with the error
please please please help
mom bought me this for my birthday like 3 days ago and the walkthrough seemed easy!
i will pay and bring my phone to you if you can fix it lol
what you should do is boot into download mode and flash the stock rom.. it will unroot u but its better then not havin a fone to root at all right?
if u have troubles booting into download mode try holding down the up and down volume keys while the fones off then plug the usb cord into ur fone it shood bring u to the download mode screen.. but make sure u hold the volume buttons down before u plug it in
thanks....i would really really appreciate it if you told me how exactly to flash a stock file (put it in the odin thingie? PDA, MODEM, or CSC? is this the right file: T959UVJFD.tar? please let me know
There is a walkthrough on this site on how to use odin to flash back to stock. I believe you have the right file there. But you will probably have to flash the pit file as well. I would just to be safe. This will set everything back to stock. Odin can be picky, and make you want to cry. But relax, your still ok. You can get into recovery mode, so you should be able to access download mode. Do a little reading on the site. You should be able to find the links to odin. If you can't, pm me, I will help. I've used odin before, and even though this is scary right now, you need to stay calm. Panicking isn't goin to help. I am new on the site so I can't post links. If you can't find them, contact me, I will e-mail them to you or some thing. Good luck!
Did you get it figured out yet? ODIN should fix you up. Flash the stock build here http://forum.xda-developers.com/showthread.php?t=739091 just download this, unzip it and load the pit file into the pit field and the larger file in the pda field in odin. Make sure to have this loaded into odin before plugging your phone in or it might not work. To get into download mode just power off your device and hold volume up and down then plug in your usb cable.
Okeynwachie said:
btw: super noob here
ok so i am getting this error and i dont know why
i rooted my phone and when i tried to upgrade to 2.2 (using odin) i got this:
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Can't mount SDCARD:
it takes me to recovery mode and just stays there with 5 options (reboot, apply sd card: update.zip, wipe data/fact. reset, wipe cache, format internal sd).
the worst part is that i found out (after research, as thus i could be wrong) that i must have somehow gotten euro firmware because my up key moves down in recovery mode and my power key isnt the "ok" key used to select anything in this damn menu!!!
ive only rooted my phone...and i got the regular update.zip (saved to internal like instructed) like everyone else (i think) + tethering and set cpu (saved zip to my external sd card)
so....i cant exit recovery mode, i cant even select any of those 5 options
i can turn off my phone, but it immediately goes back to the recovery page with the error
please please please help
mom bought me this for my birthday like 3 days ago and the walkthrough seemed easy!
i will pay and bring my phone to you if you can fix it lol
Click to expand...
Click to collapse
If I remember correctly, /dev/block/mmcblk refers to your SD cards. mmcblk0 is the internal (16GB) SD card, and mmcblk1 is whatever extra microSD card you have installed. /dev/block/mmcblk0p1 is the first partition on your internal SD card.
What most likely happened is you messed up your Odin installation, and probably chose to "reformat partitions" when you flashed, wiping your internal card, and thus essentially making your phone unbootable in its current state.
Why you needed Odin to root is beyond me, yet so is why someone would do something that could cause irreparable harm to their device do so without understanding what they were doing. If you are going to ignore the warnings attached to flashing unsupported ROMs (such as flashing an unreleased testing ROM onto a completely different device than it was intended), then you ought to at least understand what it is that you are actually doing.
Also, what does this have to do with development? Aren't there similar posts in the Q&A forum about people who have done the same thing?
that´s SD problem 100% sure. yesterday i had this problem and solved with a newone SD card. (older was 512Mb and not working, newone is 1gb and all was ok)
Were you trying to use Eugene's files? If so you need to follow the directions in his thread.
dglowen23 said:
what you should do is boot into download mode and flash the stock rom.. it will unroot u but its better then not havin a fone to root at all right?
if u have troubles booting into download mode try holding down the up and down volume keys while the fones off then plug the usb cord into ur fone it shood bring u to the download mode screen.. but make sure u hold the volume buttons down before u plug it in
Click to expand...
Click to collapse
I got a same problem. As you said I tried start download mode. But the Android system recovery <3e> page still appearing. Firstly battery picture appear and then system recovery. Is there another way to boot into download mode?
There is the three button mode, vol up and down plus power, or if you plan to flash alot of rom's, get a jig. there is adb. also aio tools.
one of these should get you into dl mode to odin.
you are in recovery mode if it says "2E" or "3E" recovery you should be able to get into download mode and then you can flash back into stock.
To get to download mode plug in you usb into the computer first. then, hold the volume keys both down then plug into the phone (while it is showing the recovery mode, in other words it is still on) if it does not work, then pull out then try again a couple of times When you plug it in leave for 2-3 secs. If this does not work or you can't get it Then, just buy a Jig from the xda member connextion2005 (mobilevideotech.com I think). they are 8 bucks and all you do in just plug it in and it will bring up the download mode. From there you can do this
Get the Odin program 1.7 or newer, get the Stock 2.1 Tar file, get the 512pit file
You can find these in the general forum in the thread called Noob guide
then
Open Odin, plug in your phone, put into download mode. connect it to the computer it will recognize might say com8 or some other number
Load the PIT file into the appropriate area and the .tar in the PDA area.
You want to check the 're-partition' box.
Now click start, let it finish, and this time your phone will load up just fine!
Then, root the phone and you can flash your new Rom.
You the super oneclick method it is easier to root then download Rom manager and now you can flash any rom you want
Still can't mount internal SD
I've tried the above steps and was able to get out of Recovery Mode, but now I can't get the Internal SD to mount to allow me to put custom ROMs on there...any ideas??
Oryon007
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode
First off i'd like to say im not new to android, im not a dev or anything but i know how to work myself around my phone. But unfortunately i think think i might have possibly semi-bricked my phone. After installing frankin twiz final rom with JAC kernel w/voodoo, i was then informed that the official JI6 update was released. After i disabled the voodoo lag fix I tried odining back to stock vibrant so i can hopefully get the OTA update. It appeared to have flashed correctly. But once i booted up my phone it booted through the samsung vibrant screen then the galaxy screen, then just stayed there for awhile and turned black. I have tried to enter download mode but i believe i have a hardware locked phone(i've tried over and over again but with no avail) so i don't think i can odin flash again. So i have no clue what to do anymore. Please help. thanks.
Can you get into recovery by holding down the +/- buttons and power button? If you can, you can boot into Clockwork recovery and use ADB to see if mount /data works and what file system is formatted.
Also if you can use the buttons to boot into recovery these are the steps you should follow to get into download mode and have ODIN recognize your phone properly.
1.) Unplug your phone from the usb cable
2.) Remove your battery, sdcard, and sim card
3.) Open ODIN
4.) Plug in your usb cable to the phone and computer
5.) Hold down the volume +/- buttons
6.) While still holding the volume buttons insert the battery.
7.) The phone should now be in download mode with the big yellow icon
8.) Odin should recognize that your phone has been connected
9.) Flash the JFD firmware following the instruction in JAC's JFD thread
Thanks silow for the reply, but i've tried that and it failed. Even before i bricked the phone i couldn't access the recovery nor download mode by the hardware button i had to either enter through ROM manager or through terminal. Any other suggestions? thanks again.
If you can't get into recovery using the hardware buttons you should return and exchange your phone because that is consider a defect.
Being unable to get into recovery or download mode when you have a "soft-brick" is dangerous business.
Sent from my SGH-T959 using XDA App
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Hit refresh packages again. Sometimes it takes more than one time.
Same thing happened to me, I ended up using odin....again. Thank god for odin
Sent from my SGH-T959 using XDA App
nick1217 said:
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Click to expand...
Click to collapse
If you cannot get into CWM recovery, than most likely you will have to Odin. If you know how to use adb, then adb the CWM update.zip onto /sdcard and select re-install packages from the normal recovery. If you don't know how to use adb, then you can either learn or follow the directions in this post on how to use Odin. You might want to learn Odin anyways as it is extremely useful if you softbrick without access to recovery.
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions at the end of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. Hopefully it will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
Download the files in the linked thread and follow the directions there or the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
hockeyrcks you arE the man, thanks so much. worked great
nick1217 said:
hockeyrcks you arE the man, thanks so much. worked great
Click to expand...
Click to collapse
Glad I could help you out. Just make sure you keep all the files on your computer in case you have to do it again. I had never had to use Odin until recently. Then I had to use it three times in one day.
Hello,
I am not sure what happened, but here is the story.
First, I tried to root the phone using the 1-click method, only to later realize that it does not work as the phone I had was running the latest OTA update. I wanted to reset my phone to factory default and I proceeded to do that.
Now, when my phone starts I see the small recovery menu and a lot of red letters stating that the system could not mount, find or open recovery directories, files or logs. (On the screen is this info Enter ok key,Select vol up/down Rebot system now, apply update from scard,wipe data/factory reset,wipe cache partition But nothing will move courser,then blow that in red is E:failed to open/res/recovery.fstab(no such file or directory) E:unknown volume for path[/cache/recovery/command with a lot more then in yellow letters #manual mode# and the same messages)
When I enter the download mode, and tried to use Odin or ADB, neither one can detect my device. I tried installing different samsung drivers on my system to no solution to being able to detect the device. Is this due to Windows not being able to initiate the drivers correctly, because when I connect the phone in Download mode, Windows has a pop-up show up that says "Drivers not recognized, your device might not work properly".
Does this mean the phone is bricked or is there something I can do to restore the phone?
Informatic_dev said:
Hello,
I am not sure what happened, but here is the story.
First, I tried to root the phone using the 1-click method, only to later realize that it does not work as the phone I had was running the latest OTA update. I wanted to reset my phone to factory default and I proceeded to do that.
Now, when my phone starts I see the small recovery menu and a lot of red letters stating that the system could not mount, find or open recovery directories, files or logs. (On the screen is this info Enter ok key,Select vol up/down Rebot system now, apply update from scard,wipe data/factory reset,wipe cache partition But nothing will move courser,then blow that in red is E:failed to open/res/recovery.fstab(no such file or directory) E:unknown volume for path[/cache/recovery/command with a lot more then in yellow letters #manual mode# and the same messages)
When I enter the download mode, and tried to use Odin or ADB, neither one can detect my device. I tried installing different samsung drivers on my system to no solution to being able to detect the device. Is this due to Windows not being able to initiate the drivers correctly, because when I connect the phone in Download mode, Windows has a pop-up show up that says "Drivers not recognized, your device might not work properly".
Does this mean the phone is bricked or is there something I can do to restore the phone?
Click to expand...
Click to collapse
did you try a different usb port? also I'd try heimdall and see if that works and sees your phone. which stock odin package are yup trying to flash?
I did manage to recover to the stock EH03 rom, by doing the first couple of steps in section 4 of the Guide for installing Rom (http://forum.xda-developers.com/showthread.php?t=1238070).
At this point, I cannot get root on my phone. I tried using 1 click root methods and those fail to install SU. I tried using the manual method of pushing rage.bin file using ADB, but that also failed.
I tried flashing some of the ROMs from section 4 of the above guide, but they cant seem to install on my phone. When I try to install through recovery, I get the picture of the android on the side and a failed install and either get stuck with the Samsung logo or a recovery boot loop.
Am I missing a step or something in order to root the phone or load a custom ROM? Is it possible that my phone cannot be rooted due to a lock somewhere?
Thanks.
Informatic_dev said:
I did manage to recover to the stock EH03 rom, by doing the first couple of steps in section 4 of the Guide for installing Rom (http://forum.xda-developers.com/showthread.php?t=1238070).
At this point, I cannot get root on my phone. I tried using 1 click root methods and those fail to install SU. I tried using the manual method of pushing rage.bin file using ADB, but that also failed.
I tried flashing some of the ROMs from section 4 of the above guide, but they cant seem to install on my phone. When I try to install through recovery, I get the picture of the android on the side and a failed install and either get stuck with the Samsung logo or a recovery boot loop.
Am I missing a step or something in order to root the phone or load a custom ROM? Is it possible that my phone cannot be rooted due to a lock somewhere?
Thanks.
Click to expand...
Click to collapse
You should have read a little but noe I'm going to tell you what to do head over to droid styles guide here http://forum.xda-developers.com/showthread.php?t=1238070 now download cwmfixedforcm7.zip and atlas 2.2.zip and put it on your computer now download this. http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip put it on the root of your SD card now power on your computer run Odin as AMINISTRATOR put the atlas.zip in the pit space in Odin check mark beside the place that said PDA and put the cwm.zip there now put your phone in download mode hook it to the computer and when Odin recognizes it press start wait for it to say PASS it may take up to 20min when its done reboot the while while holding the volume buttons, Home key button, power button when you see the Samsung logo flash twice let go of the volume up button and the home key button continue holding volume down button and the power button you should now boot into a menu with blue text now release the buttons navigate with the VOLUME BUTTONS AND THE POWER BUTTON TO SELECT go to install zip from SD now choose zip from SD navigate to the .zip I told you to put on your SD card select it then you will see a bunch of no's and a yes select yes AFTER its finished press go back then press reboot system now ONCE IT REBOOTS CONGRATS YOUR ROOTED AND SHOULD HAVE SUPERUSER!!!
Sent from my SCH-I500 using Tapatalk 2
I managed to get it working, maybe the SU.tar was corrupted as it worked this time. Thanks.