Related
I just ordered my holster from seidio and all I need is a full body invisible transparent shield for Tilt. I'm having a difficult time trying to determine which brand is a better choices(Bodyguardz, zagg, phantom skinz). So far, I'm leaning toward Bodyguardz full body shield because it seems to protect the chrome corner side part and heard good reviews on surface texture feel.
Any inputs before I order the bodyguardz? Money is not easy to come by for me so I want to make sure before I plunk down hard earned cash. =)
Thanks in advance.
I bought one of them, think it was the bodyguard or flex version. I cant tell you how they hold up though because I ended up destroying mine while trying to put them on. Talk about a pain in the ass.
It was difficult to place them in the right spots and keep out the air bubbles, even using a credit card to squeegee the air out didnt work out to well. Then some how pieces of the larger ones were sticking to themselves while I was trying to put them on. They arent like the simple screen protectors that come with the phone and are very easy to put on.
They need an instructional video for people like me. Id really love to use the full protectors after shelling out the money I did for my Tilt 2, but I wont waste my money on something thats im likely to ruin before I even get on.
Bodyguardz
Bodyguardz is great, feel and protection wise. It is a little difficult to put on but once on correctly it will be worth it. If you use a little water (actually it comes with applicator spray) it will make it easier to position while applying. I used a Best Skins Ever on my Fuze and it was a little sticky while sliding with the finger but this one is almost like the stock protector, but thicker, longer lasting. If you do a search here a xda there is a thread where someone did a very good job showing and explaining how to put it on. GREAT Of course I have Tmous TP2 but I don't think they are that much different.
I finally took the plunge and ordered bodyguardz for my tilt 2. I'll post pictures and post it here. I hope I'll do a good job installing it. I hope the shield will protect the chrome edge part of the tilt2.
have you guys ever heard of GHOSTARMOR. very similar product. these guys show videos of their product actually being scratched and tossed around. They say its made out of the same material they use on military applications. this stuff looks extremely durable from their videos.
http://www.ghost-armor.com
I wonder if bodygaurdz is made out of the same material that GHOSTARMOR uses. Ive been really leaning towards getting GHOSTARMOR for my Sprint TP2.
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
pimp4cheddar said:
I have the AT&T Tilt 2 and I love the screen shield that came in the box...does anyone know where to get more?
There was no water needed. Simply apply the shield and VOWLA* (<-check spelling) it fit perfect...
Click to expand...
Click to collapse
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
att stock screen guards/got new bodyguardz
this was a dup sorry
jlstauff said:
i do like the att screen shield - it is very smooth and feels nice. i bought a 3pack for $10 at the local att store when i picked up my new tilt2. had to ask to find them. i have 3 tiny specks of something on the current one (not bothersome so much), because once you peel the back it attracts everything to them. ive got the second one on and have 1 more before i realized that it had one i the box lol. i just got my 2 pack of body guardz but havent had the time to put it on. must devote my full attention to the process! there are great youtube videos for application tips and also great thread on this somewhere. i am very a very detail oriented person and a flawed application will drive me nuts. anywho i have 2 to try for $20 (i used a 20%) off coupon. will let you know how it goes. i chose bodyguardz cuz everyone said they are very smooth and durable and you get 2 instead of one....
Click to expand...
Click to collapse
I see...
I was actually looking for a screen protector online and in stores and stumbled into the one that AT&T put into the box with the phone. I was soooo excited!
Anyway...I don't know if I can spend $20 on 2 from bodyguardz...it's way too much money. However...you do get a lifetime replacement on them...so it might not be that bad.
Let me know how they come out and if you like them...I'm curious to see how they fit the Tilt 2.
Did you get just the screen protector of the case/phone protectors? They also sell the plastic peices for the back and sides...???
Snap some pics when your done with the application!
Thanks,
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
ProjektFuze said:
so the one that att has out of the box.. does it require cutting? or is it an exact fit?
Click to expand...
Click to collapse
It should be an exact fit
lol yea.. i actually just got mine today.. so yea found out myself... and i put it on perfectly!! seems like a very legit screen protector... very rearely do i use the screen protectors that come out of the box.. this one is actually well made and durable
id love to see pictures of this. Thanks. I ordered the only case ATT had which is a clear plastic one.
I much rather use this and a leather case so i dont scratch it with the case itself.
Bodyguardz
I bought a pair of Bodyguardz because I was very happy with them on my Raphael. They survived a crash (on the moped) which my denim jeans didn't. I also tried Best skinz ever, but they peel off far to easily. I won't be buying that anymore. Anyway, the BGZ armor has been protecting my phone for almost or over a month now. Still happy with it. I'm not so pleased with the fitting though. The ones for Raphel fit absolutely perfect. the one for Rhodium not so... I have to say I could have done a better job with the pieces on the (front)sides of the phone. But that's easy to say in hindsight. It wasn't very clear how they would fit before application. Now I know better. the screenprotector is the worst part (the way its cut out). However many people complain about the screenprotectors from BSE/BGZ/GA because of the rubber-y-ness and go for the stock one (I f-ed up my stock screenprotector so had no choice, btw I've gotten used to it). Still I would recommend BGZ. BGZ has proven itself to me several times. A crash and several drops on the floor. No damage, no scratch and doesn't peel off that easily.
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
I noticed that when I use the spen on this protector I can see the traces on it. As a matter of fact I can still see today the traces from the first time I used the pen close to a month ago. Is anyone having the same problem with invisible shield? What screen protector are y'all using that is not having this problem and where you got it?
Thanks!
I was using a BodyGuardz (similar to the Zagg) and was seeing the same thing. That style just isn't made for a precise point pen like the note has.
I've switched over to an SGP Glass-t and could't be happier with the decision. There's a thread in the forum all about it - but it's basically a glass screen protector and after a short while using it - I wish I would have found them years ago.
i had one on mine (which has since been sold for a white one arriving tomorrow) and it does show traces, but only if you look at it from a serious angle with light reflecting off of it.
the zagg's are made to change shape, etc. which is one of the reasons why they are so durable.
i honestly didn't find any fault with the traces, as i had to truly look for them. a cursory glance wouldn't reveal their presence.
that said, i have ordered a glas.t to test it and see how i like it. i'm a huge fan of zagg and i cannot stand any other type of screen protector.
I hated the traces at first as well, but I only see them when the display is off and at an angle. It doesn't affect the function of the S-Pen or visibility at all. I wish it wasn't quite so "tacky" when drawing on it - I really hope it doesn't affect the durability of the pen's nub in the long run. But for me, protecting the display with something so durable and with a lifetime warranty (and free replacement and application through Best Buy) is worth it.
johnus said:
I hated the traces at first as well, but I only see them when the display is off and at an angle. It doesn't affect the function of the S-Pen or visibility at all. I wish it wasn't quite so "tacky" when drawing on it - I really hope it doesn't affect the durability of the pen's nub in the long run. But for me, protecting the display with something so durable and with a lifetime warranty (and free replacement and application through Best Buy) is worth it.
Click to expand...
Click to collapse
for reals. i love the feel *EXCEPT* when using the s-pen. i hope they release the HD and smudge-proof versions as they may help alleviate that (though i don't like either as much).
i've put on untold thousands of them in the past 3 years while working there :]
Fernandq said:
What screen protector are y'all using that is not having this problem and where you got it?
Thanks!
Click to expand...
Click to collapse
Here's what I'm using. Probably the best SP you can buy once you get over the price. There's no feel to it and it doesn't interfere with the S-Pen or touch.
Spigen SGP Ultra Crystal
Absolutely phenomenal.
Click HERE
I want to try the Glas SGP that modmyphone posted, but the "one shot deal" installation scared me. As well as I don't think my case will fit with.
If it protects my phone I won't care if it's $99, lol
I'm quite happy with the one I got from Ebay seller 'rdstore'. Clear as a bell and the pen doesn't leave any marks. Also, $1.49.
Any of the softwer type ones are going to do this. I just peeled off my ArmourSuit to send back for a new one (life time replacements) but dont know if i'll paply it since it'll just happen again. I love the wet type ones bc they are so easy to apply and zero bubbles. Plus I've grown to love the rubbery feel of them. I will continue to use them for the back of the phone as the rubber texture provides a grippy surface to prevent phone from sliding around, but will have to get one of the thinner nonremovable crappy ones as DrawSomething has left my screen saver looking horrid.
Guys, I need help. I've bought a used RAZR HD a month and a half ago and it was in a very good condition. 9/10, maybe even 9.5. had just a scratch or two on the rim around the screen.
Since then, I've dropped it onto concrete two times and on both occasions in went corner down, so now I've got two completely wrecked corners. Nothing else is broken, it's all fine, the kevlar back is pretty much mint, the screen is great, it's just that rim that is now completely ruining the look of the phone...
Did anyone face the same problem and what have you done to fix it, if anything? The only idea I've got now is to sand down the rim to be at level with the screen, that would possibly make it look good again. Naturally, I'd be very careful as to not scratch the screen...
Can that rim be replaced anyway? I'll check out the disassembly guides and videos now to see whether it goes together with the screen...
I'm so annoyed right now. The second drop happened minutes ago... God flipping damn it. The problem is that Moto's have not been widely used here in Serbia for years now and that makes the availability of any equipment for them more than scarce. I'll be ordering a universal case right now (the one in which you slide the phone in and out) but I'd still love to make it look good again.
Flipping damn it
*edit*
According to this video... It's glued very very strongly together - http://youtu.be/LfAyttf6fWU
That's just great... And I can't even find a silicon case, be it no name or branded, to cover it all up. Will see if I can order anything from across the border.
niksy+ said:
Guys, I need help. I've bought a used RAZR HD a month and a half ago and it was in a very good condition. 9/10, maybe even 9.5. had just a scratch or two on the rim around the screen.
Since then, I've dropped it onto concrete two times and on both occasions in went corner down, so now I've got two completely wrecked corners. Nothing else is broken, it's all fine, the kevlar back is pretty much mint, the screen is great, it's just that rim that is now completely ruining the look of the phone...
Did anyone face the same problem and what have you done to fix it, if anything? The only idea I've got now is to sand down the rim to be at level with the screen, that would possibly make it look good again. Naturally, I'd be very careful as to not scratch the screen...
Can that rim be replaced anyway? I'll check out the disassembly guides and videos now to see whether it goes together with the screen...
I'm so annoyed right now. The second drop happened minutes ago... God flipping damn it. The problem is that Moto's have not been widely used here in Serbia for years now and that makes the availability of any equipment for them more than scarce. I'll be ordering a universal case right now (the one in which you slide the phone in and out) but I'd still love to make it look good again.
Flipping damn it
*edit*
According to this video... It's glued very very strongly together - http://youtu.be/LfAyttf6fWU
That's just great... And I can't even find a silicon case, be it no name or branded, to cover it all up. Will see if I can order anything from across the border.
Click to expand...
Click to collapse
Was this with a case on the phone or with the phone not in a case? Just curious as I have my phone in a case and have dropped it on the corner and no issue like you describe. In fact, no scratches at all.
Just curious.
iBolski said:
Was this with a case on the phone or with the phone not in a case? Just curious as I have my phone in a case and have dropped it on the corner and no issue like you describe. In fact, no scratches at all.
Just curious.
Click to expand...
Click to collapse
The phone was bare naked, mate. I haven't got any kind of case as of yet
*edit* Here goes a couple of picture, so someone could relate... I'm so annoyed that I've put it up for sale. If nobody takes it, I'll be sanding the rim/bezel. Perhaps all around, perhaps just this corner, not sure for now...
niksy+ said:
The phone was bare naked, mate. I haven't got any kind of case as of yet
*edit* Here goes a couple of picture, so someone could relate... I'm so annoyed that I've put it up for sale. If nobody takes it, I'll be sanding the rim/bezel. Perhaps all around, perhaps just this corner, not sure for now...
Click to expand...
Click to collapse
i recommend an otterbox defender, got mine off amazon for 20 dollars and because they are guaranteed for life i have gotten two replacements for free. i have dropped my phone off a 12 foot ladder and have thrown it against walls( dont ask) and have zero scratches or dents. phone is in mint condition.
ncsuwolfs said:
i recommend an otterbox defender, got mine off amazon for 20 dollars and because they are guaranteed for life i have gotten two replacements for free. i have dropped my phone off a 12 foot ladder and have thrown it against walls( dont ask) and have zero scratches or dents. phone is in mint condition.
Click to expand...
Click to collapse
This would be it, right - http://youtu.be/Eg5qkRCm5pU ? But, doesn't it turn what is already a quite a big phone into a massive one? Because it certainly seems so I'm guessing this cannot fit a pocket of any sort of pants? But it does seem to offer outstanding protection. Alas, at what a price, both functionality and monetary-wise (the price is $40+ on amazon?)... But even if I wanted to spend that amount of money on a case, I'd have to keep my fingers crossed for probably no less than a month, hoping that it will eventually arrive, intact and without many additional fees. Third world problems...
Thanks for the advice, anyway! I might pick up the Commuter edition, it seems more reasonable for my needs
niksy+ said:
This would be it, right - http://youtu.be/Eg5qkRCm5pU ? But, doesn't it turn what is already a quite a big phone into a massive one? Because it certainly seems so I'm guessing this cannot fit a pocket of any sort of pants? But it does seem to offer outstanding protection. Alas, at what a price, both functionality and monetary-wise (the price is $40+ on amazon?)... But even if I wanted to spend that amount of money on a case, I'd have to keep my fingers crossed for probably no less than a month, hoping that it will eventually arrive, intact and without many additional fees. Third world problems...
Thanks for the advice, anyway! I might pick up the Commuter edition, it seems more reasonable for my needs
Click to expand...
Click to collapse
yes thats it, im in construction so i went with defender, my sister has commuter and it seems to offer a level of protection for most peoples uses (2-3 foot drops) and yes it does make the phone bigger so if thats a concern i would go with commuter, also the screen protector on the defender is part of the case but with the commuter its a stick on screen protector if that matters to you( i can never get those to go on without wrinkles) i beleieve the 40 $ ones are the black ones bc otterbox stopped making them i bought a black one for 20$ 6 months ago
ncsuwolfs said:
yes thats it, im in construction so i went with defender, my sister has commuter and it seems to offer a level of protection for most peoples uses (2-3 foot drops) and yes it does make the phone bigger so if thats a concern i would go with commuter, also the screen protector on the defender is part of the case but with the commuter its a stick on screen protector if that matters to you( i can never get those to go on without wrinkles) i beleieve the 40 $ ones are the black ones bc otterbox stopped making them i bought a black one for 20$ 6 months ago
Click to expand...
Click to collapse
Thanks for the information once again, mate! And, yeah, I just figured out that there are different versions. The one with pink details is the cheapest...damn
We'll see how I can get my hands on one. The shipping fees are going to be higher than the price of the case itself, ffs :/
niksy+ said:
Thanks for the information once again, mate! And, yeah, I just figured out that there are different versions. The one with pink details is the cheapest...damn
We'll see how I can get my hands on one. The shipping fees are going to be higher than the price of the case itself, ffs :/
Click to expand...
Click to collapse
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
iBolski said:
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
Click to expand...
Click to collapse
This is very much like the generic cases available here for most smartphones, priced at $2-3. Would you say that your case has a premium quality and is worth the higher price? Because I've found those generic ones available together with free shipping on eBay. But I know how lousy their protection and appearance are, so I'm still weighing my options.
niksy+ said:
This is very much like the generic cases available here for most smartphones, priced at $2-3. Would you say that your case has a premium quality and is worth the higher price? Because I've found those generic ones available together with free shipping on eBay. But I know how lousy their protection and appearance are, so I'm still weighing my options.
Click to expand...
Click to collapse
Again, that is not exactly the case I have, but I purchased it at a Walmat department store for about $14.
It feels rubbery and it's flexible when the phone is not in it. Mine says "Body Glove" on it but I cannot find it on their site (they don't list any cases for the Droid RAZR HD).
Overall, I wouldn't say it's premium quality (not like I had with my Otterbox cases for my OG RAZR MAXX that I used to own), but it does seem to do the job for me. As I said, I've dropped the phone face down with the case I have (which is similar to the one I linked to on Amazon) and the phone came out unscathed. It was about a three foot drop onto the concrete floor in my garage if that gives any indication.
iBolski said:
Here's what I have (well, it's the same style but mine is a Body Glove that I purchased from Walmart but I cannot find it anywhere online):
http://www.amazon.com/Diztronic-Mat...9233999&sr=8-2&keywords=motorola+razr+hd+case
It's worked well so far. I've dropped my phone a couple of times, once face down and maybe two times on the side and/or corner, and my phone has been protected.
Overall, it adds a little bulk, but nothing like an Otterbox. I can put this into my pants pockets without much issue.
Click to expand...
Click to collapse
Another vote to the Diztronic - it would cover that damage and will prevent the same type of damage when you drop it again. Mine has lived in one of these since I got it and gets tossed around all the time. Has landed face first a few times and has not skipped a beat thanks to the raised lip.
OrBy said:
Another vote to the Diztronic - it would cover that damage and will prevent the same type of damage when you drop it again. Mine has lived in one of these since I got it and gets tossed around all the time. Has landed face first a few times and has not skipped a beat thanks to the raised lip.
Click to expand...
Click to collapse
Thanks, mate. The Diztronic looks wonderful compared to the chinese "s-line" thing I bought because of free shipping... It's just crap and it doesn't even cover the edges properly - the left one is fine, but it cannot stay on top of the right one. Check the picture for illustration. I'll be sure to get the Diztronic one in the future. Can you just tell me whether its rubberised or is it just the matte finish making it look as if though it were? Because it looks like it is and that it's insanely sticky and that I wouldn't be able to stick it in my pocket, but I guess it's just the matte finish
This case looks promising, but I don't know. It has no reviews anywhere, and was only featured for an old Samsung s6. If anyone on here has it or wants to try it let me know. It comes with glass screen protector, and it's apparently all screwed in. The pricetag is also sort of hefty so idk.
https://www.ebay.com/itm/IMATCH-Alu...hash=item2870b06b48:m:mzVBS8NkURWPndburZIVdig
Damn thing is a tank
Sent from my LG-H830 using Tapatalk
Id be worried about cell reception with all that aluminum. If you get it be sure to do a before and after signal test for us.
Learned my lesson with aluminum cases, it ALWAYS affects signal.
abhisek1994 said:
This case looks promising, but I don't know. It has no reviews anywhere, and was only featured for an old Samsung s6. If anyone on here has it or wants to try it let me know. It comes with glass screen protector, and it's apparently all screwed in. The pricetag is also sort of hefty so idk.
https://www.ebay.com/itm/IMATCH-Alu...hash=item2870b06b48:m:mzVBS8NkURWPndburZIVdig
Click to expand...
Click to collapse
I'm actually sending mine back this week. It's just way too impractical. The screen protector it comes with is very cheap so I didn't bother. It's also one of those cases that covers the bottom speaker and routes it to fire forward. I don't like that. You have to unscrew everything just to put the phone in and out and the metal frame, the way it rests on the phone, it doesn't give me a lot of confidence. In fact, I'm afraid it could help put enough pressure on the display to crack it with the way it's designed. Maybe I'm being too paranoid but it's not worth the risk, IMO.
Also, the little pin/lever thing on the side that's meant to move your volume slider? It doesn't work. I have to use two fingers to move both ends at the same time but it doesn't move the slider. Only the plastic pins move. So forget about being able to adjust the volume slider above the power button.
The case in general is just too bulky. I'm a pretty big guy and this case still feels too bulky and awkward to hold. It reminds me of the early days of Otterbox cases when they wanted to promote this "tank" protection-level mentality but today as you can see they've slimmed down and become more practical.
They're keeping about $7 for returning it, regardless of Prime or what return method you choose. FYI.