Hi there,
I just applied Steves 1.9.1 on my Streak5 and chose the volume hack to be included into the rom. But the only thing that has changed, is that now my device shows strange behavior while talking on the phone handsfree via loudspeaker.
There are only two stages of volume left: Very low (which is when I set the volume from 0 to 1/3) and very loud (which is when I set the volume from 1/3 to 100%)
And it only happens while making a phone call, not while using headset or playing music.
Any idea?
Greetings,
Dirk.
No ideas..?
Too bad :-(
I just flashed 1.9.1 without the volume hack, and everything is back to normal again. Is there any other way to increase the volume?
I want to know this too (how increase phone volume, specifically for listening to media with headset)
Related
Is anyone else experiencing volume control issues when listening to music on a bluetooth headset. I'm using a Motorola Finiti bluetooth and I have both the volume on the device as well as the earpiece set to the lowest setting and it is still freaking loud. I can't seem to find a means of controlling the music volume because when I take a call I need to actually raise the volume to hear the caller. Any help or ideas???
Ok, quick update. Messing around with the volume on the phone does nothing. The volume cannot be controlled by the phone. It is either on or off from the phone itself and my bluetooth volume on my headset is as low as it can go. Any ideas guys????
So ive noticed this since ive gotten my Razr. I was hoping it would be fixed in the last update but it wasnt.
Ive kinda put it in the back of my head till just now.
Whenever I make/receive a phone call (Vz number or google voice) the call volume is automatically at 100% LOUD. Not terrible when im holding the phone to my head, but what just pissed me off, is that i have my headphones in and called my voice mail. FULL BLAST in my ears
All previous phones ive had will remember the last set volume and keep it at that for the next incoming/outgoing call.
Ive looked thru the settings and it looks like you can only change the volume for: ringtone, media, alarm, and notification. Am i missing something or are a lot of others having this problem?
+1
I am using a very sensitive / efficient IEMs, Westone UM3Xs; SPL rated 124dB/mW. In other word, at 1mW of power, it can produce listening experience during F1 starting grid from grandstand seat!.
I am shocked and very surprised when "Low battery" notification blasts off while listening music or podcasts. For normal listening, I set the volume LESS than 50%, and MINIMUM level during voice call.
I wish we can do separate volume levels for headphone output.
Thank you.
Anyone else have this issue?
I can control the volume separately, (normally you need the device connected if your using the side buttons) but you can change BT, ear, headphone, etc.
... and the volume change DOES persist.
So perhaps this is something with your config.
Hi all,
I am having problem with Navigon/CoPilot GPS software where the voice volume is very soft. Especially if I am using the phone to play the music as well. It seems like both of this GPS uses the System volume which I've maxed out but it just seems too soft when compare to the media volume.
Sygic seems to work fine as it uses the media volume instead of the System volume. Just that I seems to prefer the routing provided by Navigon.
I've tried using Siyah kernel but it seems even worst due to the fact that Siyah allows you the amplify the media sound which makes the voice from the GPS almost inaudible. Is there anyone else that uses either Navigon or CoPilot that knows anyway or workaround to fix this?
One way I know is to lower the media volume and just turn up the car radio when using Aux input so that both the system volume and media volume are the same but the issue is that sometimes I forget about that and just turn back on to radio without lowering down the volume. Trust me, the sudden increase in volume is not really good for the heart and not to mention the ear.
Hope someone is able to provide me with a better workaround!
Thanks!
escaflo said:
Hi all,
I am having problem with Navigon/CoPilot GPS software where the voice volume is very soft. Especially if I am using the phone to play the music as well. It seems like both of this GPS uses the System volume which I've maxed out but it just seems too soft when compare to the media volume.
Sygic seems to work fine as it uses the media volume instead of the System volume. Just that I seems to prefer the routing provided by Navigon.
I've tried using Siyah kernel but it seems even worst due to the fact that Siyah allows you the amplify the media sound which makes the voice from the GPS almost inaudible. Is there anyone else that uses either Navigon or CoPilot that knows anyway or workaround to fix this?
One way I know is to lower the media volume and just turn up the car radio when using Aux input so that both the system volume and media volume are the same but the issue is that sometimes I forget about that and just turn back on to radio without lowering down the volume. Trust me, the sudden increase in volume is not really good for the heart and not to mention the ear.
Hope someone is able to provide me with a better workaround!
Thanks!
Click to expand...
Click to collapse
I use Siyah here and STweaks to amplify the Speaker volume.
The default value is 57, try to use 59 or 60 it can get pretty damn loud.
haranbh said:
I use Siyah here and STweaks to amplify the Speaker volume.
The default value is 57, try to use 59 or 60 it can get pretty damn loud.
Click to expand...
Click to collapse
Hi,
Thanks for that. But I am using it plugin to my car radio (aux in). This is so that I can listen to the music on my phone at the same time while the GPS is running. WIth the speaker volume, does that works if the output is not on the phone speaker itself?
escaflo said:
Hi,
Thanks for that. But I am using it plugin to my car radio (aux in). This is so that I can listen to the music on my phone at the same time while the GPS is running. WIth the speaker volume, does that works if the output is not on the phone speaker itself?
Click to expand...
Click to collapse
Speaker volume = Phone's speaker..
In your case, you need to increase the headset volume, also available in STweaks with the same values (57 default).
When I use headphones or earbuds with my phone, the in-call volume is extremely low, even with the volume maximized. Music and media are at normal volume with the headphones, and in-call volume is normal when using the earpiece or loudspeaker. It's just that when I make a call with headphones, I can almost not hear the person on the other end.
I've tried tinkering with every volume setting option, including those in DSP and even tried Volume+ (which unnecessarily boosts media volume to the extreme, but does absolutely nothing for in-call volume). I've also spent hours searching the internet and existing forums for a solution. I found this: (http://forum.xda-developers.com/showthread.php?t=1337357) but unfortunately that only bricked my phone. I'd really love to be able to use earbuds when on a call. Any ideas??
P.S.
I'm running CM11 on a Motorola Defy, if that's important.
When using in phone or speaker phone mode, the volume is very low - even with it maxed with the buttons. Same goes when I listen to voice mails with ATT visual voicemail app. However, when playing music the volume is quite good even at 50% volume.
I noticed that phone use uses only the top speaker, while playing music uses both the top and bottom speaker. I'd like to get louder volume during calls. Anyone have suggestions or insights?
BTW I'm rooted and running Havoc 4.8 if that matters.
Thanks in advance.