[Q] fastboot don't recognized my atrix - Atrix 4G Q&A, Help & Troubleshooting

i have unlocked bootloader.
but pc don't recognize now the devices
when i try to flash recovery in fastboot mode( starting fastboot protocol ) it say : waiting for device..
but the drivers is installed on the pc "mot single ADB interface"
please help me!!!!

Did you enter to fastboot mode? I'm not 100% sure but the only way to use fastboot is to go to fastboot mode.
Sent from Motorola Atrix

do you have the correct drivers form moto? i think you need them to use fastboot. (had the same issue)

Are you using moto-fastboot?
http://forum.xda-developers.com/showthread.php?t=1138092
If not, and you are only trying to fastboot a small partition (not system or webtop) you can still use some older fastboot, but you might have to type
fastboot -i 0x22b8
But best is to try with moto-fastboot...

its not working for me even with moto fastboot

teddy du 84 said:
its not working for me even with moto fastboot
Click to expand...
Click to collapse
Do fastboot devices
Does it say anything?
Sent from my ATRIX HD using XDA Free mobile app

Not to open a new topic,
I tried to install the 4.2 version over team win recovery 2.1.1 , and when he had finished and rebooted the phone appeared to me that the phone will not turn on. When I go to the android recovery, again, I switched to team win recovery? Any solution? Sory for my bad english.

JoseZizu said:
Not to open a new topic,
I tried to install the 4.2 version over team win recovery 2.1.1 , and when he had finished and rebooted the phone appeared to me that the phone will not turn on. When I go to the android recovery, again, I switched to team win recovery? Any solution? Sory for my bad english.
Click to expand...
Click to collapse
Flash cwm and try again
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
Flash cwm and try again
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Ok, thank you
edit: whether there somewhere a tutorial how to do that?

JoseZizu said:
Ok, thank you
edit: whether there somewhere a tutorial how to do that?
Click to expand...
Click to collapse
Did you check the general section? Most, if not all, guides are there.
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
Did you check the general section? Most, if not all, guides are there.
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
I have found

JoseZizu said:
I have found
Click to expand...
Click to collapse
Use the guide to flash cwm to your device
Sent from my ATRIX HD using XDA Free mobile app

I have found, please help

JoseZizu said:
I have found, please help
Click to expand...
Click to collapse
I just told you what to do. Unless you want me to copy and paste the instructions on how to flash cwm from the threads i told you to go read, i am unable to help. Flash cwm is a very simple instruction. If you can't do that, you should not be trying to flash a custom recovery
Sent from my ATRIX HD using XDA Free mobile app

I installed olympus 4.4, and when to run the system stands we just motorola logo
what's the problem?

JoseZizu said:
I installed olympus 4.4, and when to run the system stands we just motorola logo
what's the problem?
Click to expand...
Click to collapse
Which version did you flash? Did you flash the correct recovery?
Sent from my ATRIX HD using XDA Free mobile app

palmbeach05 said:
Which version did you flash? Did you flash the correct recovery?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
2.5 version

JoseZizu said:
2.5 version
Click to expand...
Click to collapse
Flash the v3m release
Sent from my ATRIX HD using XDA Free mobile app

Related

[Q] Newbie Quest - FLASH

New Atrix owner previous with that crazy fruit place.... LOVING Android wish you people would of told me about this sooner . I know the atrix comes with flash installed but I see in market place there is an app also..... do I need to install the app itself?
there is an upgrade to flash 10.2 in the market
Yes... but do i need the app on the phone or is flash in the OS
ptfd139 said:
Yes... but do i need the app on the phone or is flash in the OS
Click to expand...
Click to collapse
Yep you need to update this included flash app with the one on the market.
Sent from my MB860 using Tapatalk
It's an upgrade to the software that is already in your phone
ptfd139 said:
Yes... but do i need the app on the phone or is flash in the OS
Click to expand...
Click to collapse
if you don't want to upgrade, what you already have on your phone will work fine.
Sent from my MB860 using XDA App

[Recovery] CWM Recovery

If you are on honeycomb you are free to flash recovery via Rom manager.
If you are on gb I am working on a compatible recovery right now. Once I get it done you will be able to use the features in Rom manager but not flash recovery via Rom manager
confirmed working with Honeycomb htcdev unlocked hboot 1.14.
whats the difference from this one compared to the older one most of us currently run?
hasseye said:
whats the difference from this one compared to the older one most of us currently run?
Click to expand...
Click to collapse
Just updated. I just don't care to use outdated stuff. So since I built it I figured I would post it
Sent from my ADR6350 using XDA Premium App
any hope on porting a touch based recovery? I think all tabs should have a touch based recovery since the lack of HW buttons
Guessing this still does not allow to use the internal memory for anything?
truthkillszz said:
any hope on porting a touch based recovery? I think all tabs should have a touch based recovery since the lack of HW buttons
Click to expand...
Click to collapse
That is next on my list. I'm hoping to get with doomlord for the touchscreen stuff as the flyer/evo view uses nonstandard calls.
Sent from my ADR6350 using XDA Premium App
[email protected] said:
Guessing this still does not allow to use the internal memory for anything?
Click to expand...
Click to collapse
Internal memory works. I didn't know it was an issue on other builds
Sent from my ADR6350 using XDA Premium App
I removed the update zip. It doesn't actually replace recovery. Only soft boots it. Use img file via fastboot
Sent from my ADR6350 using XDA Premium App
is there anything special we gotta do if we already have the older version? Or can we just use the fastboot command and boom?
hasseye said:
is there anything special we gotta do if we already have the older version? Or can we just use the fastboot command and boom?
Click to expand...
Click to collapse
Fastboot flash and you are good to go
Sent from my ADR6425LVW using XDA Premium App
jmztaylor said:
Just updated. I just don't care to use outdated stuff. So since I built it I figured I would post it
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Hey man, i have been trying to do this for weeks, but when following koushes guide to porting clockwork recovery, but it will never run "make -j4 recoveryimg" or wehatever
Whoareyou said:
Hey man, i have been trying to do this for weeks, but when following koushes guide to porting clockwork recovery, but it will never run "make -j4 recoveryimg" or wehatever
Click to expand...
Click to collapse
what does the error say?
so this is the new recovery which should be installed?
Icefeldt said:
so this is the new recovery which should be installed?
Click to expand...
Click to collapse
I wouldn't say SHOULD. It's all personal choice. I guess the old one didn't support internal sd but this one does
Sent from my ADR6425LVW using XDA Premium App
jmztaylor said:
what does the error say?
Click to expand...
Click to collapse
idk exactly, but it says it cant create a boot.img
Whoareyou said:
idk exactly, but it says it cant create a boot.img
Click to expand...
Click to collapse
Well give the output and I might be able to help. If it says something about being too big that's easy to fix
Sent from my ADR6425LVW using XDA Premium App
jmztaylor said:
Well give the output and I might be able to help. If it says something about being too big that's easy to fix
Sent from my ADR6425LVW using XDA Premium App
Click to expand...
Click to collapse
well, i also had an issue extracting the boot.img, ill show you the error in a bit
Updated OP
I just rooted my view last night.. I flashed recovery once, enough to put the SU file on SD card to root. But since then, I've tried to do a backup (through ROM manager) and the white HTC screen pops up and doesn't go away. So then I tried to do it manually through hboot and when I choose recovery it does the same thing .. what do you think might be the problem? I'm very new to this so I'm hoping it is something simple that I missed... Please help

Recovery for sony xperia s - ics stock 4.0.4

My phone is Sony xperia S. ICS 4.0.4 stock. Unlocked and rooted and no recovery. I am interested to flash custom rom which I need to flash recovery. I am going thru almost all the threads since morning but could not found/understand which recovery is compatible with above specification. Please guide me or refer to a thread from where I could get the required file. Thanks
Use XRecovery.. It installs cwm on ur phone
Sent from my LT26i using xda premium
Yasharkhan said:
Use XRecovery.. It installs cwm on ur phone
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Which XRecovery. I googled and found all Xrecoveries for X8,X10 etc. None for XperiaS. Do those work for Xperia S?
Sorry it was a RecoverX.. Here's the link
http://www.mediafire.com/?d52y6ai8x5p9y2l
Sent from my LT26i using xda premium
Sorry for hijacking but Is there any way to installi it without fastboot mode? Through another receovery?
Sent from my LT26i using xda app-developers app
piponxs said:
Sorry for hijacking but Is there any way to installi it without fastboot mode? Through another receovery?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Installing cwm is possible only by flashing a pre rooted kernel through command prompt using fastboot method.
Sent from my LT26i using Tapatalk 2
piponxs said:
Sorry for hijacking but Is there any way to installi it without fastboot mode? Through another receovery?
Look at the above post..u just need a rooted phone and a pc.. And u can install the cwm
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Sent from my LT26i using xda premium
javedabbasi said:
My phone is Sony xperia S. ICS 4.0.4 stock. Unlocked and rooted and no recovery. I am interested to flash custom rom which I need to flash recovery. I am going thru almost all the threads since morning but could not found/understand which recovery is compatible with above specification. Please guide me or refer to a thread from where I could get the required file. Thanks
Click to expand...
Click to collapse
connect your phone, unzip the attachment and run bat, follow the instructions. tab screen at sony boot logo and you should be in recovery.
thanks
corum3 said:
connect your phone, unzip the attachment and run bat, follow the instructions. tab screen at sony boot logo and you should be in recovery.
Click to expand...
Click to collapse
thanks for that. ive googled and tried a few ways but that ^^ worked a treat for me :good:
ROM Manager
hi,
yes, it works, indeed (LT26i 4.0.4)! And in opposite to RecoveryX. Fortunately now I can get into recovery mode but is it compatible with ROM Manager from CWM? Because for me it seems not.

2.3.5 soft bricked

Phone wont boot up from the Motorola logo how can I fix this
Sent using Xda App
What were you doing prior and tried factory resetting?
hoslayer13 said:
What were you doing prior and tried factory resetting?
Click to expand...
Click to collapse
I was trying to add a font using root toolbox and yes I did a reset but nothing I also have a backup but that's on bootstrap and only I can get into that is my phone being able to boot up
Sent using Xda App
thabest85 said:
I was trying to add a font using root toolbox and yes I did a reset but nothing I also have a backup but that's on bootstrap and only I can get into that is my phone being able to boot up
Sent using Xda App
Click to expand...
Click to collapse
you should always have a backup on your computer... you'll need to flash a system image through fastboot or something to get it to work since there's no SBF for 2.3.5
na7q said:
you should always have a backup on your computer... you'll need to flash a system image through fastboot or something to get it to work since there's no SBF for 2.3.5
Click to expand...
Click to collapse
How do I do that stuff
Sent using Xda App
na7q said:
you should always have a backup on your computer... you'll need to flash a system image through fastboot or something to get it to work since there's no SBF for 2.3.5
Click to expand...
Click to collapse
Can he copy his Bootstrap recovery files from his micro sd card to his computer using a card reader then flash those image files through fastboot?
thabest85 said:
How do I do that stuff
Sent using Xda App
Click to expand...
Click to collapse
well i'm not sure if anything besides img files can be flashed via fastboot. so you need to find the system image file from someone who has it? i don't as i have the electrify.... but maybe you could temporarily reflash the electrify rom to it then restore your bootstrap backup... let me find a link. i sent you a PM.
na7q said:
well i'm not sure if anything besides img files can be flashed via fastboot. so you need to find the system image file from someone who has it? i don't as i have the electrify.... but maybe you could temporarily reflash the electrify rom to it then restore your bootstrap backup... let me find a link. i sent you a PM.
Click to expand...
Click to collapse
I don't have any pms
Sent using Xda App
thabest85 said:
I don't have any pms
Sent using Xda App
Click to expand...
Click to collapse
you do now! haha, i sent it to the wrong person........ i'm a failure...
na7q said:
you do now! haha, i sent it to the wrong person........ i'm a failure...
Click to expand...
Click to collapse
lol
na7q said:
you do now! haha, i sent it to the wrong person........ i'm a failure...
Click to expand...
Click to collapse
Nope still nothing
Sent using Xda App
stupid XDA won't send my messages and i don't know why! this happens to me all the time.
so go here instead http://www.motosunfire.com/system/
try and follow the directions and you should have your photon booted up in no time.
na7q said:
stupid XDA won't send my messages and i don't know why! this happens to me all the time.
so go here instead http://www.motosunfire.com/system/
try and follow the directions and you should have your photon booted up in no time.
Click to expand...
Click to collapse
Lol thanks bro ill be back with results (hopefully)
Edit : in just got your pm lol
Sent using Xda App
I have my photon back thank you
Sent using Xda App
thabest85 said:
I have my photon back thank you
Sent using Xda App
Click to expand...
Click to collapse
so did this method work for you with no issues? if it did i would like to know so i can make a page dedicated to this issue that a lot of users are having.
na7q said:
so did this method work for you with no issues? if it did i would like to know so i can make a page dedicated to this issue that a lot of users are having.
Click to expand...
Click to collapse
it worked for me but who knows maybe I just got lucky
Sent using Xda App
thabest85 said:
it worked for me but who knows maybe I just got lucky
Sent using Xda App
Click to expand...
Click to collapse
awesome. that's good news. that system image was pulled from a "magical photon" with a completely unlocked radio. literally a one of a kind photon. so i wasn't entirely sure it would work alright. i should try and get an image of the stock 2.3.5 standard... thanks for the report! enjoy your working phone
na7q said:
awesome. that's good news. that system image was pulled from a "magical photon" with a completely unlocked radio. literally a one of a kind photon. so i wasn't entirely sure it would work alright. i should try and get an image of the stock 2.3.5 standard... thanks for the report! enjoy your working phone
Click to expand...
Click to collapse
Thanks bro
Sent using Xda App

[Q] Different boot screen

Hi,
I've just finish wipping my phone and did by mistake one more action (EXT size to 0) and now I've got this booting menu:
http://www.godiet.co.il/godiet/147/ArtixBrick.jpg
Is it fixible ?
Actually I can do everything with it but after flashing rom I'm getting some touch problems.
rafi532 said:
Hi,
I've just finish wipping my phone and did by mistake one more action (don't remember what) and now I've got this booting menu:
http://www.godiet.co.il/godiet/147/ArtixBrick.jpg
Is it fixible ?
Actually I can do everything with it but after flashing rom I'm getting some touch problems.
Click to expand...
Click to collapse
did you flash the unlocker sbf?
http://forum.xda-developers.com/showthread.php?p=14984532
Sent from my MB860 using xda app-developers app
palmbeach05 said:
did you flash the unlocker sbf?
http://forum.xda-developers.com/showthread.php?p=14984532
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Do you mean , if this phone is unlocked ? yes.
I guess I've flash it, don't remember how exactly I did it.
rafi532 said:
Do you mean , if this phone is unlocked ? yes.
I guess I've flash it, don't remember how exactly I did it.
Click to expand...
Click to collapse
what recovery are you using?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
what recovery are you using?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
CWM 5.0.2.7
OK I found the solution already here:
http://forum.xda-developers.com/showthread.php?p=43214404
For changing logo screen I've used this:
http://forum.xda-developers.com/showthread.php?t=1423763
(I've put this logo: http://www.abload.de/img/steel_andy_smallx43fo.png and don't miss the old red motorola image)
Thanks to this forum

Categories

Resources