i m using x10 mini pro with 2.1 firmware
i have rooted my phone and installed busybox .
i have tried every method of installing xrecovery0.1 and 0.3 both .....
it shows all 3 green check marks but when i try to boot it to xrecovery menu by pressing back key repeatedly ...nothing happens it just start as normally nothing change comes..
i have tried it about 20 times ....
plz anybody give some suggestions or any another way of installing custom roms ....
Did u try to Root Phone and Install XReC with Flashtool?
here is the link...
http://www.multiupload.com/GYL7A7XQBT
can you guide me how to do this ...... i m a beginner but quick learner...........
plz
the problem is my English is Bad do u Speak German?
SuCreX said:
the problem is my English is Bad do u Speak German?
Click to expand...
Click to collapse
sry i dont know german ........
i also dont know enough english
i tell u Tomorrow
please reply fast
SuCreX said:
i tell u Tomorrow
Click to expand...
Click to collapse
first of all thanks for answering my question...
but i need some guidance to install xrecovery properly
Go to x10 mini pro development section...there's a stickie about it...if that doesn't work den I have another solution which workd fr me in the same case u suffered
Unroot ur phone via superoneclick den do a factory reset (I know its painful so tryna keep a backup of ur apps with titanium backup before unrooting). Then after factory reset, root ur phone again and get a busybox installer from market and this time don't use xrecovery installer. Try to copy the chargemon, busybox and xrecovery.tar file to system/bin
P.s: download xRecovery-mini-0.1-beta.tar.bz2 from development forum to get busybox, chargemon and xrecovery.tar
Use root explorer to copy paste them...don't forget to give this files full permission
Sent from my U20i using XDA Premium App
aaahhh just go and check AIO automatic installation script, its in mini pro development thread, it installs xRecovery if u want cwm then use my modded script!
coolboyranjodh said:
i m using x10 mini pro with 2.1 firmware
i have rooted my phone and installed busybox .
i have tried every method of installing xrecovery0.1 and 0.3 both .....
it shows all 3 green check marks but when i try to boot it to xrecovery menu by pressing back key repeatedly ...nothing happens it just start as normally nothing change comes..
i have tried it about 20 times ....
plz anybody give some suggestions or any another way of installing custom roms ....
Click to expand...
Click to collapse
after spend about 6 hour i finnaly found how it works , see my next reply in page 2 and you will find the instruction
xrecovery works works for x10 mini , testes !!
i couldnt wait until night , really wanna share this point that couldnt find it on guidence sites im really toxicated and it doesnt mean that i wanna show off my dicovery
instruction :
1 download the attached rar file , pass is : "afra"
2 unistall all xrecovery u installed before .
use root explorer and delete previous xrecovery.tar and other 2 file (busy box and chargemon) from sdcard & system\bin directory .
3 now u clear ! go to market or find busybox aplication (better install it from merket )
3.1 -when it ask which version u want to install choose th last one 1.8...
3.2 -and when it aks where do u wanna install , choose system\bin
3.3 -done installation
4 . extract the "xrecovery tested work for x10 mini.rar" , copy three files into
your phone sdcard directory(means defualt directory open when u plugged you phone to pc) and unplugged the phone
5 . (this is the elegant point ) use a root explorer and first 'cut' the
xrecovery.tar into system\bin
then try to change permission(due to instruction u know) and you will have no error ! change is done
6 now copy xrecovery.tar (permission changed file) from system\bin into sdcard
folder and copy two other "busybox" "chargemon" into system\bin
7 restart your phone and press repeatedly back buttom several time and heavens door will open
if u had any problem let me now
afraaa said:
i couldnt wait until night , really wanna share this point that couldnt find it on guidence sites im really toxicated and it doesnt mean that i wanna show off my dicovery
instruction :
1 download the attached rar file , pass is : "afra"
2 unistall all xrecovery u installed before .
use root explorer and delete previous xrecovery.tar and other 2 file (busy box and chargemon) from sdcard & system\bin directory .
3 now u clear ! go to market or find busybox aplication (better install it from merket )
3.1 -when it ask which version u want to install choose th last one 1.8...
3.2 -and when it aks where do u wanna install , choose system\bin
3.3 -done installation
4 . extract the "xrecovery tested work for x10 mini.rar" , copy three files into
your phone sdcard directory(means defualt directory open when u plugged you phone to pc) and unplugged the phone
5 . (this is the elegant point ) use a root explorer and first 'cut' the
xrecovery.tar into system\bin
then try to change permission(due to instruction u know) and you will have no error ! change is done
6 now copy xrecovery.tar (permission changed file) from system\bin into sdcard
folder and copy two other "busybox" "chargemon" into system\bin
7 restart your phone and press repeatedly back buttom several time and heavens door will open
if u had any problem let me now
Click to expand...
Click to collapse
OR
Install flashtool, click 3 buttons in total
afraaa said:
i couldnt wait until night , really wanna share this point that couldnt find it on guidence sites im really toxicated and it doesnt mean that i wanna show off my dicovery
instruction :
1 download the attached rar file , pass is : "afra"
2 unistall all xrecovery u installed before .
use root explorer and delete previous xrecovery.tar and other 2 file (busy box and chargemon) from sdcard & system\bin directory .
3 now u clear ! go to market or find busybox aplication (better install it from merket )
3.1 -when it ask which version u want to install choose th last one 1.8...
3.2 -and when it aks where do u wanna install , choose system\bin
3.3 -done installation
4 . extract the "xrecovery tested work for x10 mini.rar" , copy three files into
your phone sdcard directory(means defualt directory open when u plugged you phone to pc) and unplugged the phone
5 . (this is the elegant point ) use a root explorer and first 'cut' the
xrecovery.tar into system\bin
then try to change permission(due to instruction u know) and you will have no error ! change is done
6 now copy xrecovery.tar (permission changed file) from system\bin into sdcard
folder and copy two other "busybox" "chargemon" into system\bin
7 restart your phone and press repeatedly back buttom several time and heavens door will open
if u had any problem let me now
Click to expand...
Click to collapse
I follow your instruction, but the problem is same, i can into in xrecovery, i shut down my phone and i press back back back back ..... back (when SE logo apear) and nothing phone gone to start in normal mode... I have android 2.1 with 2.6.26 kernel version. The phone is rootet, i can acces with root explorer, i can mont r/w or r/o, i have installed busybox from market version 1.8. Xrecovery can't use because after install and start to push the button to put the fille, the three icon appear with red.... who can help my, i lose a lot of time and nothing... (SORRY FOR MY ENGLISH
diniulian said:
I follow your instruction, but the problem is same, i can into in xrecovery, i shut down my phone and i press back back back back ..... back (when SE logo apear) and nothing phone gone to start in normal mode... I have android 2.1 with 2.6.26 kernel version. The phone is rootet, i can acces with root explorer, i can mont r/w or r/o, i have installed busybox from market version 1.8. Xrecovery can't use because after install and start to push the button to put the fille, the three icon appear with red.... who can help my, i lose a lot of time and nothing... (SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Install Flashtool from here http://forum.xda-developers.com/showthread.php?t=920746 (version 0.2.91 or BELOW!!)
Enable USB Debugging on ur phone
Connect phone
Click "Ask Root Perms" in flashtool (Presuming ur phone is rooted)
Click "xrecovery" once flashtool confirms it has root access granted.
Reboot ur phone and press back button repeatedly
OR
In one of the menu's there is an item "Recovery-----> Boot into recovery"
click on it
Hope that helps!
Peace
diniulian .. sry i wasnt here for a while
did u could change the permission ? cuz permission is the only important matter .
and ps "
did u tried mate "rosshalz" instruction with flash too? ..
i will feed back your problem now
Forget it. Already tested. Thanks.
I testet it again on my brother x10 mini , and it worked , if you could change the permission it should work with my instruction !
Related
I was reading these threads and couldn't find an easy installer for xrecovery on the X10i Mini (E10i).
I looked at zoz33 installer for the X10 and changed the files to suit the E10i.
So now you can just install this app and run it and it will install xRecovery
Requirements:
1. Phone MUST be Rooted.
2. Busybox installed (Easiest way is to install "Titanium Backup" & click on the "Problems?" button.)
If you are having problems installing: Open Root explorer (Free version here) and set /system to R/W then run the installer again!
NOTE: this has only been tested on my X10i MINI (E10i) and I don't think it will work on other models (Different CHARGEMON versions?!?!).
Please comment so I know if this works or not! Thanks.
Just tried it on my X10min E10i, it installed the installer then got a force close when I ran the program & clicked install..
Ran flashtool & clicked root this morning as well, it said root should be available..
andrewbuch said:
Just tried it on my X10min E10i, it installed the installer then got a force close when I ran the program & clicked install..
Ran flashtool & clicked root this morning as well, it said root should be available..
Click to expand...
Click to collapse
ummm.. have you installed busybox from the market?!?!
Muspelheim for remouny job?
Hi there!
Thx for this nice work (I hope - haven't tested it yet)!!!
In case /system needs r/w remount - can muspelheim be used?
Since I don't have Root Explorer (no visa card) - I'd prefer this option..
Thx in advance!
Keep it up
Housefly
EDIT: Muspelheim will not remount /system as r/w - see known issue on the muspelheim homepage (sorry, but i'm not allowed to link yet)
However - I found this little app from beansoft - which appears to do the trick - for free - twitter(dot)com(slash)beansoft
Hope this is helpful..
I'm off to try getting Xrecovery working on the x10 mini..
Thx
deano309 said:
ummm.. have you installed busybox from the market?!?!
Click to expand...
Click to collapse
I tried searching for it, but nothing comes up I am still new to this loading different software etc..
but also on flashtool from bin4ry it has an option to install busybox, I did that & it said its installed.. But after doing the root, xrecovery & busybox the phone still looks & acts & has same features as normal, no extra icons etc...
Dont think my root worked properly. Trying it again now.. sorry
andrewbuch said:
I tried searching for it, but nothing comes up I am still new to this loading different software etc..
but also on flashtool from bin4ry it has an option to install busybox, I did that & it said its installed.. But after doing the root, xrecovery & busybox the phone still looks & acts & has same features as normal, no extra icons etc...
Click to expand...
Click to collapse
xRecovery is a Hidden program - you access it by restarting the phone and AS SOON as the text "Sony Ericsson" appears - keep pushing the "<-" Back button. if it starts loading your boot animation then you either missed the time to push back or installation failed.
If you are not too sure on how to access or use xrecovery then please read a bit of info before you use it as it can stop your phone booting if used wrong!
Cool thanks for the help.
I ran exploid root now. got titanium backup & installed busy box
then when i ran xrecovery installer, it had a message pop up saying xrecovery installer has superuser permissions.
turned off phone, turned on again & pushed back button.. & nothing happened.
Will keep trying..
thanks
andrewbuch said:
Cool thanks for the help.
I ran exploid root now. got titanium backup & installed busy box
then when i ran xrecovery installer, it had a message pop up saying xrecovery installer has superuser permissions.
turned off phone, turned on again & pushed back button.. & nothing happened.
Will keep trying..
thanks
Click to expand...
Click to collapse
You have to push it more than once, right after the "Sony Ericsson" appears.
Keep pushing it (1 or 2 times a second)
THANKS...
Got it working.
Thanks again
I didn't get this apk-version to work. - I think it's due to the superoneclick rooter. - I get the cp: not found -error.
However I got the 0.1 beta to work using the older (and free) Root Explorer - attached somewhere in this forum - can't remember where - so happy searching if you need it
HouseflyOfDoom said:
I didn't get this apk-version to work. - I think it's due to the superoneclick rooter. - I get the cp: not found -error.
However I got the 0.1 beta to work using the older (and free) Root Explorer - attached somewhere in this forum - can't remember where - so happy searching if you need it
Click to expand...
Click to collapse
cp: not found is because you don't have busybox installed (cp is the copy command).
Glad to know that you sorted something out anyway!
I got a rooted phone, whit busybox installed like u said, taping the promblem box etc .. and the system folder set to R/W whit rootexplorer, I installed the xrecovery to my phone and when I start there the 3 boxes doesn t are checked in green, and the xrecovery doesn t installed, I looked in the system/bin folders on my phone and there are copied the 3 files: busybox, xrecovery.tar and the chargemon, Any idea what is going wrong ? (sorry 4 my bad english)
The .apk did not work for me. I followed the commands from the program screen manually in root explorer, and finally got xRecovery working. The problem was the last file, xrecovery.tar, It hasn't been copied by the script. I have busybox installed, X 10 mini 2.0.A.0.504, App2SD. Thank you
How can u write commands in root explorer, I never used it so i dont know, and I dont know how to see eventualy the sd card from the rott explorer
me too，it works~
asmodea said:
How can u write commands in root explorer, I never used it so i dont know, and I dont know how to see eventualy the sd card from the rott explorer
Click to expand...
Click to collapse
I don't write, hold the file, select "copy", navigate to destination folder, select "paste". Also, there is a folder "sdcard" in the main directory, this is the SD card.
Hey there
First, thanks alot for working on an apk for the xRecovery program
My problem, i cant get it to work.
1. I Rooted with SuperOneClick - worked.
2. Had Titanium Backup, so just downloaded BusyBox by using "Problems - worked
3. Installed the xRecovery.apk from Astro File Manager, program installed, had no errors.
4. Rebooted the phone, spammed the back button (3-5 clicks/second) - and i dont get the xRecovery option. Did a few times, still not getting it.
5. Tried so click the xRecovery program in the apps list, installed it again, this time it asked for Root rights, i approved - and the program shows in the "Superuser" program.
6. Tried rebooting again, tapping the back button like insane, still wont give me access?
Any ideas?
asmodea said:
I got a rooted phone, whit busybox installed like u said, taping the promblem box etc .. and the system folder set to R/W whit rootexplorer, I installed the xrecovery to my phone and when I start there the 3 boxes doesn t are checked in green, and the xrecovery doesn t installed, I looked in the system/bin folders on my phone and there are copied the 3 files: busybox, xrecovery.tar and the chargemon, Any idea what is going wrong ? (sorry 4 my bad english)
Click to expand...
Click to collapse
If the 3 files are in your /system/bin folder, then it worked.
You need to keep pressing the back "<-" button as soon as you see the "Sony Ericsson" logo (Push it 1 or 2 times a second).
If your bootscreen comes up then something is wrong.
If the 3 files are not there then you don't have R/W privelages for your /system folder or any sub-directorys.
Manual installation here: http://forum.xda-developers.com/showthread.php?t=878426
asmodea said:
How can u write commands in root explorer, I never used it so i dont know, and I dont know how to see eventualy the sd card from the rott explorer
Click to expand...
Click to collapse
If your phone is rooted then navigate to /system/bin and at the top right there is a "Mount R/W" button, press it and it will set the folder to R/W.
If you are not rooted then you won't be able to open the folder.
It's my first post and the system tells me to post here!
So i have x10 mini pro update to android 2.1 with SEUS, i rooted with superoneclick, now i want to install Xrecovery...i have the three files:
Xrecovery.tar
chargemon
busybox
I know that i have to copy them to system bin and then reboot, correct?
My questions...
1) I have AndExplorer and I can't change dir attributes..do i need root explorer in order to do this or there's a way also on andExplorer?
2)I have titaniun back up installed and so busybox but it's in the folder \system\xbin not \system\bin, so i have to copy the three files in bin or xbin??
Thanks a lot!!
titanium backup will work. it is xRecovery that will not work with another busybox. check the threads at the x10 mini section. if you can not access xrecovery, try getting the chargemon from the other thread, or if you know how, change event1 to event0 (which i dont know how).
I'm not on a Pro (just a mini) but I have found there are a few Windows apps and scripts to simply install busybox, root, Jit, Xrecovery etc on the mini and pro (single click operation) there is even an .apk for the mini to install Xrecovery..
If you search the threads you will find them.. shouldn't be any reason anyone has trouble with these simple mods.. with all the DEV work gone into making scripts and apps, even my girlfriend could manage it (if she had any interest in modding her Mini)
if you still want to do it the hard way (I guess thats the best way to learn).. Busy box is an important thing to get right, if you have installed it... look in your app drawer and find your installed "busybox" then open the app and click on Install (I don't know why you install it then have to 'install' it within the program but you do) or is it just me?
the 3 files should be in System\bin but you also need to change the permissions before you reboot.... more forum searching required if you want to find out how to do that without Root Explorer... the search feature is your friend and the best way to learn.. good luck.
hope that helps..
Kiwi
http://forum.xda-developers.com/showpost.php?p=11234546&postcount=4
i installed root via superoneclock and installed xrecovery via flashtool, but didn't work well, than i installed xrecovery mini and it works great.
i am using an x10mini pro
stipey75
i had some of your problems too
1) Titanium use its own version of busybox. You can use an app called 'root checker' to see if busybox is installed properly
I had to install it, heres's link
http://forum.xda-developers.com/showthread.php?t=946259
2) To change permissions i used a free version of root explorer
http://www.mobiles24.com/downloads/s/410555-294-root_explorer
X10 mini Pro Xrecovery
Hello im trying to get Xrecovery to work on my xperia x10 mini pro but i cant install it, i ahve put the 3 files in the right folder and restarted my phone several times pressing the "back" button but nothing happens,
anyone know how to fix it plz.
Hecoro said:
Hello im trying to get Xrecovery to work on my xperia x10 mini pro but i cant install it, i ahve put the 3 files in the right folder and restarted my phone several times pressing the "back" button but nothing happens,
anyone know how to fix it plz.
Click to expand...
Click to collapse
First, make sure you don't copy but MOVE. Copy won't work.
Second http://forum.xda-developers.com/showthread.php?t=913136
In this page there's a link an automatic installation of root and xrecovery, why don't you try that?
Had similar issues on my x10i flashtool wouldnt set up xrecovery correctly, so downloaded app from market, installed, then clicked install again, but the three checks stayed crossed. Rebooted phone, and then the checks got ticked second time round. Now running freex10 2.2 beta 4 from z. Ita amazing.
Sent from my X10i using XDA App
i have the same problem !! nothing happen im having an x10 mini pro
ook step by step
first you flash your phone new with seus or etc.
then root with for example super one click
now download supermanager for free from the market and intall it
copy the three files to sd
open supermanger chose settings mark: root
go back to the first menu
select file manager
wait for superuser to give rigths to filemanager
copy the three files to /system/ bin
the file manager ask you wich modus do you want: you chose R/W
after that you reboot your phone
when the white "sony ericssion" appear press the back button
then xrecovery start
I have installed xrecovery on my mini pro and have copied those 3 files into system/bin not copied moved actualy and my phone is rooted via z4root and I still cant get xrecovery to work wen I reboot my phone and press the back button. Please help need advice
Sent from my U20i using XDA App
mibuwolf said:
I have installed xrecovery on my mini pro and have copied those 3 files into system/bin not copied moved actualy and my phone is rooted via z4root and I still cant get xrecovery to work wen I reboot my phone and press the back button. Please help need advice
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Check my psted turorial here in the mini general. Or you can click my sig about killed my phone.
Sent from my U20i using XDA Premium App
Thanx for the info but I did everything as described moved those 3 files into system/bin even got an updated busybox from the link in your tutorial and still I get nothing :-( what i'm I doing wrong please please help me I would be greatfull.
Sent from my U20i using XDA App
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied ! (this means sellect all)
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
i copied from here http://forum.xda-developers.com/showthread.php?t=950324
and it works
Thanx so much it works great just one more thing, what is Jit what does it do and how do I install it?
Sent from my U20i using XDA App
mibuwolf said:
Thanx so much it works great just one more thing, what is Jit what does it do and how do I install it?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
just install custom rom like.. miniCMpro froyo, it has JIT on/off setting and others.
Where can I find the custom rom?
Sent from my U20i using XDA App
Hey guys,
The easiest way to install root and xrecovery is to download the newest version of flashtool. The newest versions have xrecovery and root for all version of xperia family (x10, x10mini, x10minipro, x8). They should not have any problems rooting or installing xrecovery. I would reinstall the laster fw via SEUS before using it tho.
Cheers,
evilbarcode.
Can anyone provide me with a link where I can download minicmpro? Plz
Sent from my U20i using XDA App
mibuwolf said:
Can anyone provide me with a link where I can download minicmpro? Plz
Sent from my U20i using XDA App
Click to expand...
Click to collapse
here you got two great costum roms for x10mini pro.
CM7 Gingerbread http://forum.xda-developers.com/showthread.php?t=1041099
CM6 Froyo http://forum.xda-developers.com/showthread.php?t=961783
im using CM6 Froyo final. and for now is stable
Hey guys,
The good news i wanna notice for everybody here is my X10 Mini Pro with lastest firmware 2.1.1.A.0.6 can Root + xRecovery + JIT and use Link2SD okay without any errors !
I will tutorial you to do that. Now lets begin !
Root : Automate Installation
1. Download attached file "SuperOneClick".
2. Enable "USB Debug".
3. Connect phone to "PC" and select "Charge Phone".
4. Open "SuperOneClick" and select "Root".
5. Wait!
6. When it is done, reboot.
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied !
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
JIT : Here is manual installation. Automatic Installer here : http://forum.xda-developers.com/showthread.php?t=951274
I'm strongly recommend to backup with xRecovery before install JIT !
- Download attached file !
- Go to market place and find app "Terminal Emulator" download and install it.
- Extract and copy to sdcard
- Use root explorer to remount /system rw
- Copy dalvikvm,dexopt,logcat in sdcard to /system/bin/
- CHMOD 755 for 3 files copied!
- Copy libdvm.so,libnativehelper.so,libcutils.so,libdl.so,liblog.so,libm.so,libz.so in sdcard to /system/lib/
- CHMOD 644 for 7 files copied!
- Copy build.prop in sdcard to /system/ (You can use your build.prob file. Please see Warning section below)
- Chmod 666 for build.prop !
- Go to /data/dalvik-cache/ and remove all file in it or use command rm -r /data/dalvik-cache/* or we can use xRecovery and choose Advanced Options > Wipe dalvik cached
- Reboot your phone and enjoy !
- To check it work or not run Terminal Emulator and type dalvikvm -k if you see "Configured with: debugger profiler jit show_exception=1. It's mean JIT has been working !
Warning : if your phone cannot reboot again please use xRecovery to restore backup file (if not backup yet you can use SEUS to reflash your device) and JIT again with your build.prop file.
Follow these instructions:
- At the step copy build.prob above please use your build.prob instead my file provided and edit your file :
- Edit /system/build.prob with Root Explorer
+Find :
DEVICE_PROVISIONED=1
Click to expand...
Click to collapse
and replace with
#DEVICE_PROVISIONED=1
Click to expand...
Click to collapse
+Find :
dalvik.vm.heapsize=24m
Click to expand...
Click to collapse
and replace with
dalvik.vm.heapsize=30m
Click to expand...
Click to collapse
+Find :
kernel.log=default
Click to expand...
Click to collapse
and replace with
#kernel.log=default
Click to expand...
Click to collapse
+Find
debug.sf.hw=1
Click to expand...
Click to collapse
if don't have add one
+Add
dalvik.vm.execution-mode=int:jit
Click to expand...
Click to collapse
at the end of file !
- Save file and do continue others step to complete JIT.
Thanks to zdzihu for xRecovery, shivenjuneja for SuperOneClick modified version and all member in XDA for JIT installation method !
Now important action ^_^. Please thanks me if you want cheer !!
Can anyone confirm that the jit part is working?
i just instaled every thing x recovery works but when i installed jit the phone frezes at se logo and will not boot. Waited 15 mins and nothing good thing i did a back up
Sweet,another repair added to my records :/
Miniwolfi said:
i just instaled every thing x recovery works but when i installed jit the phone frezes at se logo and will not boot. Waited 15 mins and nothing good thing i did a back up
Click to expand...
Click to collapse
Do you wipe all dalvik caches ?? and the first boot after install it's take about 5 minutes to rebuild all cache files. After that it's working perfectly. Try to reboot few times and plug off your battery first !
no need to use the modified superoneclick.
the original version 1.6.5 just fine in this firmware
http://forum.xda-developers.com/showthread.php?t=803682
juan77_sonic said:
no need to use the modified superoneclick.
the original version 1.6.5 just fine in this firmware
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Dude i used this version 1.6.5 but it cannot root for newest firmware for me ! It's notice me that device rooted but it's not you can check device root or not with Root checker in the market , it's also check busybox install !
i tried the method exactly like u write
stuck at SE white logo and it's rebooting again n again (10 minutes)
ntonzrockz said:
i tried the method exactly like u write
stuck at SE white logo and it's rebooting again n again (10 minutes)
Click to expand...
Click to collapse
I have been wrote new warning section for who have problems same you. Please read and do again to fix it. I hope you can because i can
quangnhut123 said:
I have been wrote new warning section for who have problems same you. Please read and do again to fix it. I hope you can because i can
Click to expand...
Click to collapse
okay i'll try it, maybe tomorrow...
it's late night now
thanks anyway
I was updated my TUT for more details !
For those needing JIT in the version 2.1.1.A.0.6.
donetus has updated deano309 xrecovery based installer. All you need to do is copy the files to the SD card and update using xrecovery.
http://forum.xda-developers.com/showthread.php?p=11289748#post11289748
Works well.
safrajs said:
For those needing JIT in the version 2.1.1.A.0.6.
donetus has updated deano309 xrecovery based installer. All you need to do is copy the files to the SD card and update using xrecovery.
http://forum.xda-developers.com/showthread.php?p=11289748#post11289748
Works well.
Click to expand...
Click to collapse
Thanks this i nice TUT but not automate system to install i will write script to do that but now i'm not because i'm have not free time dude
warkxia said:
xRecovery compatible with :
X10 MINI / 2.1.1.A.0.6
Click to expand...
Click to collapse
Please test more as Root and JIT. Thanks for reading my topic !
warkxia said:
xRecovery install but not boot ><
Click to expand...
Click to collapse
Why not boot dude ? Try my AIO installer script : http://forum.xda-developers.com/showthread.php?t=951274 to install xrecovery because xrecovery working 100% on lastest firmware ! i tested so many times
Re: OP
quangnhut123 said:
+Find
Code:
[COLOR="red"]debug.sf.hw=1[/COLOR]
if don't have add one
+Add
Code:
dalvik.vm.execution-mode=int:jit
at the end of file !
- Save file and do continue others step to complete JIT.
Click to expand...
Click to collapse
Hey bro, nice TUT for jit...just wondering, the part in red, what do i replace that with? Or do i just comment it out? Sorry prob a stupid question, im just really sick of having to reflash so just making sure its all good before i flash to my phone.
Cheers,
Jeremy.
jeremyward420 said:
Hey bro, nice TUT for jit...just wondering, the part in red, what do i replace that with? Or do i just comment it out? Sorry prob a stupid question, im just really sick of having to reflash so just making sure its all good before i flash to my phone.
Cheers,
Jeremy.
Click to expand...
Click to collapse
you just need find it if it's exist do nothing . And if not exist please add it after kernel.log=default
PS : As i recommend please backup your phone with xRecovery !
quangnhut123 said:
you just need find it if it's exist do nothing . And if not exist please add it after kernel.log=default
PS : As i recommend please backup your phone with xRecovery !
Click to expand...
Click to collapse
Cheers bro, i thought so but i just wanted to make sure.
And i dont need to back up coz im making my own custom rom and im just enabling jit within it.
Cheers,
Jeremy.
for people who want xrecovery and wants to charge offline (phone off) as well, you just have to follow this post:
http://forum.xda-developers.com/showpost.php?p=11549855&postcount=5
help with xrecovery
hello guys,
just bought myself x10 mini pro and loving it so far. I have successfully rooted and have busy box and su permissions.
next, I followed the following steps for xrecovery but it does not seem to work for me.
Code:
xRecovery : Manual Installation
- Phone must be rooted
- Download and install Titanium Backup. Run it and press Problems to install busybox or you can install standalone busybox in market !
- Download attached file and unpack the recovery package in to sdcard
- Use Root Explorer to remount /system rw
- Copy the content of the package (3 files) into /system/bin folder
- Chmod 777 for 3 files copied !
How to use xRecovery :
- Reboot your phone !
- Press BACK button few times right after white SE logo appears.
- Use VOLUME-UP and VOLUME-DOWN to browse, HOME to select, BACK to go back.
I have copied the 3 files using root explorer and mounting it rw and the permission set to 777. I have also checked the files/permission using adb shell.
I have then turn the phone off, turn it back on and press back < button on the sony ericsson logo but no matter how many times i press or hold the back button it does not take me into recovery menu.
Edit:
my bad, i did not copy over busybox and chargemon because the files were already there from rooting process.
anyone who has this trouble, make sure you copy all the three files to system/bin folder and set the permissions and it should be good.
Hi guys,
I need help, my xrecovery wont start and the phone reboots normally. Im using a x10a, firmware .435 baseband .54. I installed busybox, and then using flashtool .9 i rooted the phone and then installed xrecovery, but it wont start when presing back after SE logo. Is there any way i can fix this problem? Ive researched in this page already but theres nothing about this.
Sent from my X10a using XDA App
you must press the back button during the sony logo appears.
if dont work repeat the installation of xrecory and busybox without the flash tool. follow this instruction http://forum.xda-developers.com/showthread.php?t=859571
sorry for my bad english!
It's not just a one-time press. On my X10, I have to spam it for about 15-30 seconds before it happens. As soon as the Sony Ericsson logo starts, hit that back button and don't stop hitting it until XRecovery starts. As I said, depending on the rom and phone, should take between 5-30 seconds.
maybe you didn`t install xre in your device successfully.
check whether these following three files are in the system\bin
busybox chargemon and xrecovery.tar
if they are in there ,than maybe that`s the way that you hit the back button is wrong.Not pressing it all the time,but hit it during the sony ericson is on your screem.
sry for my poor english
please try to re-install xcovery
http://forum.xda-developers.com/showthread.php?t=859571
I have them, except for Xrecovery, which is not there for some reason. Ive tried to reinstall it, but it acts like if it was there already. Is there any way to clean erase Xre?? Im thinking about flashin, fixing the OS and then installing Xre again, since i dont have much data to save except for what i already have backed up in my sd card.
Sent from my X10a using XDA App
hit back button frequently whn SE logo appears.. it'll take u to xrecovery... if u hv installed it via FT .9 than its perfectly installed on ur mentioned BB,
Im really getting frustated :s I reinstalled the Xre installer and ran it.... however, the 3 files had a circule with a crossing red line (like the ones from no smoking signs) and that never changed no matter how long I left it there. Then I checked to see if the 3 files where there, and I think if was only chargemon present, then I tried (after flashing the cellphone) to manually install it (had the cellphone rooted with SuperOneClick) and tried copying those three files and it said they couldnt be copied into system/bin (tried different file managers and same thing). I honestly dont know what else to do, im reaaally frustated at this point. I would appreciate if you guys could help me.
At least is there any other way I could install FreeX10 Froyo 2.2 Beta 4 maybe by using flash tool?? can u please post step by step in case there is??
I would say reflash, root, and then reinstall xrecovery. that's the cleanest solution.
dont reflash! your system>bin folder likely wasn't mounted r/w. Just try again and before you paste the files click the 'mount r/w' button at the top.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
dont reflash! your system>bin folder likely wasn't mounted r/w. Just try again and before you paste the files click the 'mount r/w' button at the top.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Thank you very much, that really helped me!!!!
What I did was, in case it happens to someone else:
1- Download ES File Manager from the market.
2- Open it, hit settings and then Home Directory. I typed in the value "/" without the quotation marks, that way I could easily move around the folders. (Not necessary I guess, a matter of preferences).
3- Next is to mount the system files, by going into ES File Manager, settings, root options, root explorer, then hit Yes, HiAPK, and Mount File System.
4- Then, I had the 3 files (chargemon, busybox and xrecovery.tar) in my sdCard in a folder named Xrecovery, and one by one I copied them into /system/bin
Thats basically it, I rebooted the phone and by hitting the back button I gave me the Xrecovery menu.
Good luck
I had the same issue when trying to install xrecovery...ended up having to do a manual install. I think the process is described in reindeiros how-to noob thread..
Edit:I did the same as lsamuelcf...only used Root explorer instead.
Sent from my X10i TripNMiUI using XDA App
i had same problem but then i thought of it and installed root explorer.... i changed to r/w and installed... i was trying for about 3 days before i solve the riddle...
after installing the Rom I ****ed something and now my phone displays, and not to go neshte new rum nor rekovarito place, and I write this -------- xrecovery can't open / tmp / recovery.log
and now the phone is not usable, people help you have a chance to fix
pls help
Not a big problem to be honest.
Can you turn your X10 Mini on\off? (Since you need to turn it off for using the official updatetool.)
If you do, just download the Sony Ericsson Update Service for the X10 Mini.
You can find it on SE's official site under downloads.
Then just update your cellphone's FW to 2.1 again.
If you cant turn it off, you can let it drain and then do it.
OR you can remove the back cover on the phone, then remove the rubber cover over the powercord, then remove the powercord gently with a little pin to turn off the phone.
Then plug it in again and do the update-progress.
Hope it helped you in any way.
I have myself done this many times due to failed CFW install.
Edit:
As for installing xrecovery..
That isnt hard either to be quite honest.
First you root your phone and reboot it.
Install Root Explorer from the Market after root + reboot.
Get the xrecovery files over to the memorycard.
Use Dropbox if you cant use the memorycard on your computer.
Then open Root Explorer and go to the system folder and click "Mount R/W",
find the three files (xrecovery files) on your memorycard and move it to the
correct location (system/bin ? .. make sure you read up on where it is. it says where in the xrecovery thread here on xda-developers, because Im not 100% sure its in the bin folder.)
Reboot and you should have xrecovery when you boot and spam the "back" button!
Once upon a time you had to CHMOD the three files after you moved them to the correct folder (to 755), but the last time I checked xrecovery I didnt have to.
Just make sure you read the walkthrough on the official xrecovery thread. It all is there.
dmbardal said:
Not a big problem to be honest.
Can you turn your X10 Mini on\off? (Since you need to turn it off for using the official updatetool.)
If you do, just download the Sony Ericsson Update Service for the X10 Mini.
You can find it on SE's official site under downloads.
Then just update your cellphone's FW to 2.1 again.
If you cant turn it off, you can let it drain and then do it.
OR you can remove the back cover on the phone, then remove the rubber cover over the powercord, then remove the powercord gently with a little pin to turn off the phone.
Then plug it in again and do the update-progress.
Hope it helped you in any way.
I have myself done this many times due to failed CFW install.
Edit:
As for installing xrecovery..
That isnt hard either to be quite honest.
First you root your phone and reboot it.
Install Root Explorer from the Market after root + reboot.
Get the xrecovery files over to the memorycard.
Use Dropbox if you cant use the memorycard on your computer.
Then open Root Explorer and go to the system folder and click "Mount R/W",
find the three files (xrecovery files) on your memorycard and move it to the
correct location (system/bin ? .. make sure you read up on where it is. it says where in the xrecovery thread here on xda-developers, because Im not 100% sure its in the bin folder.)
Reboot and you should have xrecovery when you boot and spam the "back" button!
Once upon a time you had to CHMOD the three files after you moved them to the correct folder (to 755), but the last time I checked xrecovery I didnt have to.
Just make sure you read the walkthrough on the official xrecovery thread. It all is there.
Click to expand...
Click to collapse
thank you very much, everything is fine