So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
I'll throw this out there in case it ends up working out for your. I used to try finding clear cases and arm bands but they never really worked very well and I ended up prefering the phone near my waist and running my headphones inside the back of my shirt.
It works great for my uses. I love it for jogging/working out/shooting around (basketball).
SPIbelt sells jogging belts, bands, etc.
http://www.spibelt.com/spibelt.php
http://store.spibelt.com/Waterresistantspibelt-p/7bl-a001-001-waterres.htm
It does not have a clear face. It's just a slim water resistant pouch/belt that you can order to fit your phone. I just specfied "pouch for HTC EVO" when I ordered mine.
Again it does not have a clear face and I wouldn't even say it's "easily accessible". But for holding your phone securely while being very active (I use it for jogging, lifting and shoot arounds) it is very secure. I strap it around my waist and you forget it's there.
Just thought I would throw it out.
bitslizer said:
So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
Click to expand...
Click to collapse
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
bitslizer said:
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
Click to expand...
Click to collapse
Yes I have the Seidio case on it and it fit just fine I will try and get some pictures up for ya latter on tonight...
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
Just ordered one so we'll see how it works out.
From the Sensation boards: http://forum.xda-developers.com/showpost.php?p=16715676&postcount=4
Shady Gambino said:
Arkon's XL-Armband fits the Sensation. I have one with the Incipio NGP case and it fits with the case on.
We designed the armband to fit most phones with screen sizes from 3.7" - 4.3". I've tested it with the Sensation as seen above, Thunderbolt (with TPU case), Droid 3, Droid X 2 and a couple others and they fit.
http://www.arkon.com/sports_armband/#xlarmband
$17.95
*Sorry for the annoying servo noise, I had to use a DSLR to record the video since I was using my live Sensation as a model and the auto focus was on :\
Click to expand...
Click to collapse
Pics with the EVO 3D:
It fits a naked EVO 3D nicely, I'd say it would probably fit with a TPU case.
Got my case from iArmband today and I'mot impressed at all. The holes don't line up at all for the headphone jack, it's more of a generic size then specifically for the 3D and the arm strap is way too short.
Edit... So I received an email from iArmbands about my issues with this item. They apologized for the inconvenience and issued a full refund. They also told me to go ahead and keep the product as well...pretty outstanding customer service if you ask me.
Related
Innopocket Magnum Case
How does it handle in daily use?
Does it support an extended battery?
I'm using the Brando hardcase and it's been good, but after a couple of drops the corners of my BA are a little dinged up since there is no corner protection.
Thanks!
Tikerz said:
Innopocket Magnum Case
How does it handle in daily use?
Does it support an extended battery?
I'm using the Brando hardcase and it's been good, but after a couple of drops the corners of my BA are a little dinged up since there is no corner protection.
Thanks!
Click to expand...
Click to collapse
I am on my second one. The first broke within a month and was replaced by the dealer. The side clamps that hold the case closed are not well made. Even a small drop will cause the springs in the clamp to pop out or the entire clamp comes out. I have spent a lot of time searching around on the ground for all the pieces after the clamps falls apart. Sometimes the clamp comes loose for no reason. You will be walking and your PDA falls out of the case. I was told that I probably just had a faulty case and they sent me another one. The clamps look the same so I figure the same thing will happen. The aluminium case locks with a different mechanism and works much better.
I have a magnum
As far as cases go it's the bet i've owned. Better than the tinny metal ones. The only reason my BA works is thanks to this case.
I'd reccomend it
Since reveiving the second case I havn't had any problems. I think I just had a lemon the first time.
does this really protect the device in some cases of accident drop. Hows the the feel of the case?
Tikerz said:
Does it support an extended battery?
Click to expand...
Click to collapse
Can you get an extended battery for the BA? Got a link for it?
Yes on e-bay but I have heard some horror stories about them so be careful.
murduck said:
does this really protect the device in some cases of accident drop. Hows the the feel of the case?
Click to expand...
Click to collapse
Yes it really does protect the phone. I have dropped mine twice with this case and there was no damage to the phone at all. It did pop out of the case once though.
I have not had any issues with this case untill the threads on the post wore out and the case started falling due to that. I was not happy with the way they put the post on the cases. but it has lasted longer and functions better than any other case I have owned for my SX66 so I would buy another.
I have this case, but I prefer to use the original Siemens case, for the sole reason of ergonomics.
The Blue Angel is a sleek, sexy piece of art (all compacted into a phone), and to hide it in a bulky titanium case just doesn't seem right to me. Also, you cant use the touch screen and using the call/end and D-Pad buttons is a clumsy task with the innopocket case. I'd recommend getting a nice leather folder type case or an OEM style Siemens case.
However, the Innopocket case is GREAT when you use the phone as a GPS. Just attach the car mount to the back, and it protects the phone from hitting the windshield and dashboard while driving down a bumpy road.
I bought on eBay and I can't use it !
If I put my sx66 in the case it will push the button and other than that I can't close securely. I'm very dissapointed with the quality.
So please don't buy it !
I've had a few. Both the Titanium and Black Magnesium.
Also I've owned these for 4 different PDA models. After a few falls The Titanium will actually Dent in and itself leave a scratch on your PDA. The Magnesium doesn't dent in and is the one I currently use. The black case also compliments the silver PDA's color very well. Both will Pop open on a fall sometimes leaving your machine vulnerable. Serious Issue - I wish They would fix. All in all it is the most protective and stylish case available. You can recoup most of your lost functionality by assigning Voice Command to the record button. These are not like soft cases though. As you bump or drop your PDA around they will become damaged and inoperable and you will have to replace them.
balakhan said:
I have this case, but I prefer to use the original Siemens case, for the sole reason of ergonomics.
The Blue Angel is a sleek, sexy piece of art (all compacted into a phone)
Click to expand...
Click to collapse
omg Sorry but I have to say, I had palm IIIe, 2x palm 505, Tungsten E, qtek 1010, qtek 2020 and now BA which is qtek 9090 and last one is the more ugly than any of the pdas I owned before. Even the 2020 was piece of the art comparing to 9090
If you want to see sleek and sexy piece of art take a look at palm m505, that little guy gathered a lot of prizes for the design and thats for the reason, it looks like the some part of the porsche. BA is definitely not in that class.
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
I am hoping there are some people here who know about what brands/sites are good ones or trustworthy.
Ok, picking up my Evo 3D on Friday..... and surprise surprise, the phone isn't even out yet, yet there are a million different places with brands nobody has ever heard of with supposed cases for this phone, some of them even having dimensions smaller than the phone itself despite being listed as for the 3D.... (Yes I know, no need to tell me many manufacturers will take existing stock and claim it works for the new device just to sell it).
So the thing is, I have no idea what cases might be designed specifically for the HTC Evo 3D, or even any respectable sites to buy such cases from.
But I am also sorta over-complicating the issue by not being sure if I should first over a back cover for the phone or not. See, I am not a fan of the way the camerapod sticks out, I was wondering if there were any GOOD cases that add enough bulk to essentially make the cameras level with the rest of the phone, even if this will add thickness.
Something like this, but I don't know if this really is an official HTC product or not, and if there aren't better ones (or if that is a trustworthy site):
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28040
And this brings me to my main concern. The main case I want to get is a belt-clip holster, not just a simple little clip that attaches the phone to your belt but basically a whole pouch to hold it, something like this:
http://www.amazon.com/Black-Horizontal-Leather-Magnetic-Closing/dp/B0051IGCAI
But on top of the problem I already mentioned of there being a million cases just simply calling themselves a HTC Evo 3D case... there is also the issue of how it will fit. Normally, I don't care if a case is a little too big for a phone since it will hold it anyway, but all of my previous phones didn't have sensitive parts like the camera sticking out so much before, if I were to get a case, id want one designed to hold the pushed-out camera in place too.... but that would only work if I decide not to get a case that ads bulk for the purpose of keeping the cameras flush with the back of the phone.... and if I do decide to go with a back-cover to add bulk, will those pouch-cases then even still hold the phone or will it then be too thick?
Sigh... I'm over-complicating things aren't I? So anyway, any ideas? Its a shame those back-covers that increase the size of the phone can't make use of that size, such as storing a slightly higher capacity battery or something.
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
ey
retnuh730 said:
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
Click to expand...
Click to collapse
post some links so we can see what they look like plz i still need case
http://www.amazon.com/gp/product/B0053NWDO0
This is the silicone one. Cheap and highly rated for other phones.
http://www.amazon.com/gp/product/B0052TTMXA
This is the snap together (innocase surface-esque) one. Might be sold out now.
where is the case with the kickstand?
I went yesterday to a sprint store and got me a otterbox commuter case. I love it. They had about 4 different kinds but none with a kickstand. They also had the car dock as well.
TPU case for me. Ordered a few weeks ago from ebay, $4 shipped.
picked up a chase from BB this morning belt clip
case 20
screen protector was free
Are there images of any of these cases?
Cyber Akuma said:
Are there images of any of these cases?
Click to expand...
Click to collapse
case i have
http://www.bestbuy.com/site/olspage...d=1218353393109&viewtype=largeFrontView&h=387
but with out the kickstand
Picked up a Body Glove hard case when I picked my 3vo up this morning. Doesnt add too much bulk
Sent from my PG86100 using XDA Premium App
I got the case that Best Buy sells with a kick stand. It's 2-piece, kickstand, soft-touch, protects well. Very streamline. It costs too much ($40.00) but I had some reward points and ended up getting it for free. Love it!
Hmph, just terrific. To complicate matters, that hardshell case I posted isn't even available until July 13 apparently.... and nobody is showing that it looks like from the front...
I guess I should just at the minimum get a belt-clip pouch for now. Does anyone know of any good horizontal ones that were specifically designed for the Evo 3D instead of just general cases that roughly fit a phone of that shape?
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
jm1280 said:
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
Click to expand...
Click to collapse
I just need thinness and a kickstand. :\
CalvinL said:
I just need thinness and a kickstand. :\
Click to expand...
Click to collapse
I am with you.
Sent from my SAMSUNG-SGH-I777 using XDA App
try the casemate case...I know it looks cheap, but it has a kickstand and its hard rubber, so its decent for impact
Case
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
hkeyman said:
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
Click to expand...
Click to collapse
Awesome. Please do.
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
bigsho said:
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
I agree. Its no body glove, but it gets the job done.
I use the Casemate one as well.
Gets the job done
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
F_L_Abs said:
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
You bought what instead?
CalvinL said:
You bought what instead?
Click to expand...
Click to collapse
Lol whoops.
I got the case-mate pop case instead!
Sent from my SAMSUNG-SGH-I777 using xda premium
Had trouble verifying my Paypal account for some reason. I ended up paying more at Amazon for the case. Ended up costing $8.90 cause of NY tax.
check out my review on the case-mate http://forum.xda-developers.com/showthread.php?t=1286742
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
BigBopper said:
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
Click to expand...
Click to collapse
Yeah, it's called Minisuit. I ordered it via Amazon.
Luckily it's TPU and not a hard case so I can make that second opening.
ozone777 said:
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
Click to expand...
Click to collapse
I was considering that one, but hard cases are more difficult to cut the mic opening.
ny gs2 doesn't say Samsung or att on front.... only says galaxy S on back cover... is that supposed to be like that
Sent from my SAMSUNG-SGH-I777 using xda premium
Ok, I got the case.
Doesn't fit 100%.
The bottom in particular, but it's barely noticeable. The top mic needs to be cut out some more, which shouldn't be too difficult since it's not plastic.
Case actually looks a lot better than I expected. The kickstand is very flimsy, which I expected. Once you put the stand up, don't put any pressure on it. It's very likely to just snap off. The power button becomes pretty stiff, too.
They also ran out of minisuit keychain screen cleaners. They said if I want one, email them about how I feel my order is "incomplete without one," and they'll send one when they have more stock.
Kind of a weird way to make us word it.
Either way, I'd recommend this if you need a very sleek and thin case that doubles as a flimsy kickstand.
Body Glove - Tactic Case for the HTC EVO 4G LTE
I saw 2 threads where people were going to try this case. If you purchased one would you recommend it? I did see them on ebay for $18.99 with free shipping.
I have a Body Glove for my Evo 4g and really like it.
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
+1
Body glove has been a lot more miss than hit as of late for me tho. Anything from cheap cases that break after a couple days, scratching the phone, not fitting correctly or not locking and falling off to paint/clear coat rubbing off the first say.
Sadly, I wouldn't recommend body glove to anyone.
Sent from my EVO using xda premium
My local sprint store had the white ones in stock Saturday when I got my phone
I will be interested in hearing your opinion about how well the buttons work with this case.
jamerican413 said:
I ordered one but it hasn't been released yet. They don't even have a picture posted on their site. I hope it lives up to expectations, as the pics I've seen are cool. Body Glove's cases are hit or miss, though.
Click to expand...
Click to collapse
Got one with my phone Saturday. Fit is almost too good. Hard to remove without taking the plastic covers off the back with it. Also the cover scratches easy and is looking pretty old after just 4 days. I got the white one which was all they had available Saturday. Will be looking for a gel case soon. Buttons work alright though. No scratches on my phone from the case.
Sent from my EVO LTE using xda premium
Thanks for that. I'm cancelling my order. Too much money to not be happy...
My Sprint store had the white ones on release day so I got one. Seems to work pretty good!
Sorry for the bump and double post, but I wanted to second that the body glove RIPS the top-back off of the phone when removed. Or it rips the bottom panel off the phone (worse!)
I like it, I just don't like removing it!
its really hard to take out and when you do it it will take your back cover out, i dont like this cover because it feels weak, i bought it @ sprint but already purchased a otterbox commuter to replace it,
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
I got the Body Glove from Sprint as well, and don't need it since I already had a case. It is the gray one. If anyone is interested in buying it at a discounted rate, it is never used and still has the original packaging. PM me if interested.
ahecht said:
I got this case at the Sprint store and have been pretty happy with it. The combination of the hard plastic outside and the silicone inside seems to offer a lot of protection, and there is a nice lip to protect the screen. All the holes seem to be in the right places and the buttons work well. The power button is a bit difficult to press, but I actually like this as it prevents it from being accidentally locked in my pocket (it only there were a way to disable the Sense ring lock).
It does make the phone noticeably bulkier, especially on the back where the case bulges out a bit (there is a 1mm gap between the phone and the case. Still, the overall package is no thicker than my naked HTC Hero. The added side thickness also means that the phone doesn't stand up as much when using the kickstand.
The store only had the white version, unfortunately, but since I was exchanging another case I didn't have much of a choice (it was that or the pink Otterbox Commuter).
I've removed it a couple of times and had no problems with the back cover coming off, but I was careful to follow the removal instructions (at least on the Sprint version, it comes with instructions telling you to remove it starting with the bottom corner next to the microphone, followed by the other bottom corner, following by sliding the top out). It fits the car dock well with the insert removed and with some minor adjustment of the foam pads.
Click to expand...
Click to collapse
Seems like a lot of people missed this when I read reviews. I myself missed it initially.
http://www.shopandroid.com/body-glove-tactic-case/4A123A11576A.htm has the black version of the case for $17 today (7/19/2012) as their deal of the day.
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
jones79 said:
Does anyone know if there is a holster out there that will work with the Body Glove Tactic case? I recently got a case and holster combo from my local Sprint store and I didn't check to see if the holster would work with the Car Dock Sprint sales and the case was too big to fit in the car dock even with the insert removed. The Body Glove Tactic case works great in the Car Dock, but I would really like to have a holster for it.
Thanks in advance.
Click to expand...
Click to collapse
I have the same this cover as well as the otterbox commuter and i use the seidio Holster for both of them, it fits like if it was made for it.
<--- Thanks button :laugh:
Do you have the Active or Surface holster from Seidio? Thanks for the response.
Sent from my EVO using Tapatalk 2
this case broke my first htc evo 4g lte, its why i had to use my replacement, when i took the case off, it fit so tight, that it took the back off too, tearing the plastic......DO NOT BUY , BUYER BEWARE...spend the extra money and get a real case
I love mine. I love the grip on it. However, trying to remove it is a huge hassle and sometimes it breaks the case partially. Otherwise it's great for the grip. Feels good when I play the Pokemans on my EVO.
Sent from my EVO using xda app-developers app
I have one of these on my phone. It does scratch quite easy and takes the back off when you pull it off, but it does not scratch the phone or trap dirt and dust. other than scratching up i dont mind the case. I would much rather have that happen to the case than my phone.