[KERNEL]░█░ Jeffrey-SpeedFrey 3.0.0 ░█░ Amazing battery life(!) & more (Update 21/08)
Mod Edit - Thread closed while under investigation
Hello guys,
It's my kernel for the SGS II.
I am very surprised with the battery life.
With my own experience (with Batista ROM, the best for me): The battery is still 100% after 8 hours sleep (wifi ON, data ON)
The kernel works very great. Stable, fast, no reboot or freeze. Tested with some roms. Stress test successfully done without reboot or freeze.
The kernel has these frequencies: 1204 / 1150 / 1100 / 1000 / 800 / 500 / 200 mhz. Compatible with SetCPU (auto detect).
IMPORTANT
For versions 2.2.0 and lower : there are 3 versions. Release Version, Workaround Version and Stock Voltage Version.
For versions 3.0.0 and higher : there are 2 versions. Release Version and Workaround Version.
Try only Workaround Version or Stock Voltage Version if you have issues with Release Version.
You can install this kernel with Odin (in PDA) or CWM Zip installer (since 2.1.0).
AFTER the kernel has been flashed please calibrate your battery.
My goal: Battery life and Optimization.
More optimizations and options in the future. Kernel continuously updated.
Jeffrey-SpeedFrey_Kernel 3.0.0
This kernel is optimized and uses low ram. The boot is very fast and everything is very smooth and fast.
Impressive battery life while using your mobile phone.
FEATURES (for more details, look changelog) :
Undervolted (CPU and GPU) (not compatible with the SETCPU control voltage because the kernel is optimized with my own values)
Workaround version available (less undervolted)
Stock voltage version available
SetCPU compatible (1204/1150/1100/1000/800/500/200 mhz)
BFQ-V2 Scheduler added and set by default
838 MB ram memory available
CIFS support (cifs.ko and slow-work.ko automatically integrated in "/lib/modules")
BLN support
Vitalij's touchscreen fix (value : 10)
Rooted
CWM 4.0.1.4
Interactive governor
Disable some debugging options / look changelog (better battery life, better ram usage and smoothness)
Some tweaks / look changelog (better battery life, better ram usage and smoothness)
Initd.d support
I/O scheduler tweaks
Low ram usage
Optimized for battery life
Changelog 3.0.0 :
SetCPU compatible (1204/1150/1100/1000/800/500/200 mhz)
BFQ-V2 Scheduler added and set by default
838 MB ram memory available
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Increased smoothness with ram optimization
Increased battery life when the phone is on sleep with cpufreq.c optimization
Disabled Config_bugverbose (more memory, better smoothness and better battery life)
Disabled Bug() (optimize memory usage, better smoothness and better battery life)
Unnecessary developer options disabled (optimize memory usage)
General optimization for battery life
Thanks to all beta testers
At the bottom of the page screenshots of stability test.
Try only Workaround Version or Stock Voltage Version if you have issues with Release Version.
Mod Edit: Download links removed.
Changelog 2.2.0 :
BLN support
Vitalij's touchscreen fix
Try only Workaround Version or Stock Voltage Version if you have issues with Release Version.
Mod Edit: Download links removed.
Changelog 2.1.0 :
CIFS support
Init.d support
Low ram usage (optimized)
Increased battery life with kernel optimization
Increased performance
Increased kernel stability
Switched to SLAB
CONFIG_STACKTRACE disabled
CONFIG_CGROUP_DEBUG disabled
CONFIG_DEBUG_FS disabled
CONFIG_DEBUG_USER disabled
Switched to Linaro 4.5.2 GCC toolchain
Compiler optimization
Try only Workaround Version or Stock Voltage Version if you have issues with Release Version.
Mod Edit: Download links removed.
Changelog 2.0.0 :
Disabled CONFIG_FTRACE
Disabled CPU FREQUENCY TRANSLATION STATS
Disable Kernel-debugging (better battery life and smoothness)
Disabled SLAB-debugging support (better battery life)
FIXED reboot and freeze (stable)
Try only Workaround Version or Stock Voltage Version if you have issues with Release Version.
Download (Release 2.0.0) / better battery life : View attachment Jeffrey-SpeedFrey2.0.0uVx3-Release.tar
Download (Workaround 2.0.0) : View attachment Jeffrey-SpeedFrey2.0.0uVx3-Workaround.tar
Download (Stock Voltage 2.0.0) : View attachment Jeffrey-SpeedFrey2.0.0sVx3-Stockvoltage.tar
Stability test (3.0.0 / classic test) :
Stability test (3.0.0 / scaling test) :
RAM usage (2.2.0) :
Battery usage (2.2.0) :
Thanks to Hardcore (Speedmod) for his initramfs.
Nice to have another Kernel Dev on board! I'll give your Kernel a try, will post results later on!
EDIT:
Correct me if I'm wrong, but this one seems to be based on the t18b-Speedmod-Kernel by Hardcore! At least this is was the Kernel-Info says! You should mention that in your OP!!
Tried : Jeffrey-SpeedFrey_Kernel1.0.0uV-x3 (Extreme Edition 3) Amazing battery life
Am running the latest SolarFlare ROM.
Flashed with ODIN as a PDA file.
Booted fine ... a few minutes later.. stuck ... .. the phone/screen/buttons unresponsive ...
flashing the x2 version now .. will report back how it goes .
cool will also try
ashagg said:
Tried : Jeffrey-SpeedFrey_Kernel1.0.0uV-x3 (Extreme Edition 3) Amazing battery life
Am running the latest SolarFlare ROM.
Flashed with ODIN as a PDA file.
Booted fine ... a few minutes later.. stuck ... .. the phone/screen/buttons unresponsive ...
flashing the x2 version now .. will report back how it goes .
Click to expand...
Click to collapse
tried x2 for leomar's rom.
phone hanged.
ashagg said:
Tried : Jeffrey-SpeedFrey_Kernel1.0.0uV-x3 (Extreme Edition 3) Amazing battery life
Am running the latest SolarFlare ROM.
Flashed with ODIN as a PDA file.
Booted fine ... a few minutes later.. stuck ... .. the phone/screen/buttons unresponsive ...
flashing the x2 version now .. will report back how it goes .
Click to expand...
Click to collapse
The x3 version depends on the mobile phone(SGS II). You need to have a bit of luck with this version
thanks. will give it a try.
edit:bootloop with leomar 2.5 (Extreme Edition 3)
Giving the x2 a go now. Seems fine after 10mins .
Edit: using cog 1.30.
Sent from my porn shoot using GT-I9100.
more2come said:
Nice to have another Kernel Dev on board! I'll give your Kernel a try, will post results later on!
EDIT:
Correct me if I'm wrong, but this one seems to be based on the t18b-Speedmod-Kernel by Hardcore! At least this is was the Kernel-Info says! You should mention that in your OP!!
Click to expand...
Click to collapse
Only for the initramfs (cwm 4.0.1.4 and root !) but not the kernel it's from official samsung (update1) and modify by me !
Tried the x2 ...
Still hangs after a few minutes
Tried the x1 ....
Hung and Screen black as soon as an SMS came in ... perhaps something to do with BLN because I see the softkey lights still on.
hmmm
ashagg said:
Tried the x2 ...
Still hangs after a few minutes
Tried the x1 ....
Hung and Screen black as soon as an SMS came in ... perhaps something to do with BLN because I see the softkey lights still on.
hmmm
Click to expand...
Click to collapse
Which rom do you use? Maybe your phone don't like the under voltage....
ashagg said:
Tried the x2 ...
Still hangs after a few minutes
Tried the x1 ....
Hung and Screen black as soon as an SMS came in ... perhaps something to do with BLN because I see the softkey lights still on.
hmmm
Click to expand...
Click to collapse
same rom, same result.
leomar revolution v2.5
Like I mentioned ... I use the latest SolarFlare ROM
Freezy on cog 1.31, so many attempts also are failing, disabled setcpu(even uninstalled it), but still fails.
Might be some other trick is required!
teksin said:
Only for the initramfs (cwm 4.0.1.4 and root !) but not the kernel it's from official samsung (update1) and modify by me !
Click to expand...
Click to collapse
If you did take something from hardcore, at least have the courtesy of mentioning him...
jdrake001 said:
If you did take something from hardcore, at least have the courtesy of mentioning him...
Click to expand...
Click to collapse
I mentioned!
I use the latest batista rom and the uv-x3 version. So far no problem, running now for about an hour
puschkin said:
I use the latest batista rom and the uv-x3 version. So far no problem, running now for about an hour
Click to expand...
Click to collapse
Yeah ! i have batista too. And no problem with it !
Gaaaah with cog 1.30 none of them work
Sent from my porn shoot using GT-I9100.
No luck for 1x to 3x.............
- freeze on first few min (2x & 3x)
- Sleep to dead (1x)
back to Speedmod............
P.S. Using Cognition S2 v1.31
Related
[ROM] KGPNeok Nexroid ExteremeS v6.1 (base on CM7.1.0 Stable)|Extreme Smooth & Stable
KGPNeok Nexroid ExteremeS - ExtremeSpeed
ExtremeSmooth
ExtremeStable
Base on CM7.1.0 Stable ROM (Android 2.3.7)
Not included A2SD, D2EXT, D2WE
Default language - English
Multi Language Support!!
(Same as CyanogenMOD 7 Language support)
File size - 79MB
Changelog
- 3G Speed tweak
- Performance tweak (only use stable tweak)
- Battery tweak
- changed Theme (Desire+GalaxyS)
- Google APPS included
- I/O Scheduler default set to noop
- WCDMA Prefered->GSM Auto
- CPU scheduler optimzed
- Kernel tweak
- VM/IO tweak
- Remount partitions noatime, nodiratime
- Chaged ringtone
- light APPS
Change than before version
- Base on Cyanogenmod 7.1.0 Stable (Android 2.3.7)
- 3G Speed tweak changed
- improve Performance
- improve battery efficiency
- improve smoothness
- tweak code changed
- tweak method changed
- tweak code clean up
- Busybox 1.18.2
- RAM Optimized
- Lite optimization settings
- Newest DSP Manager from nightly 253
- Added Samsung Digital Clock widget
- wallpaper changed
Extreme/Incredible Smooth and Performace
More save battery
- Included Neok UltimateS Kernel v3.2
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, CAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to Intersect-Raven's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt
Wipe ALL data/factory reset , Wipe Cache and Wipe dalvik-cache before update
Recommand ext4 sd-ext partition
Performance
(Good) EXT2>EXT4>>EXT3 (Bad)
Stability
(Good) EXT4>=EXT3>>>>>>EXT2 (Bad)
It maybe not working with BLACKROSE HBOOT, ch33kybutt's A2SD(use dark tremer's A2SD, that's working)
It maybe not working with S2E
Download Link (Link Recovered) - http://d-h.st/z8t
Thanks for this, always nice to see something new. Downloading now and will report back.
shadowch31 said:
Thanks for this, always nice to see something new. Downloading now and will report back.
Click to expand...
Click to collapse
Thanks!!
Downloading....will report soon...
atoyu said:
Downloading....will report soon...
Click to expand...
Click to collapse
thanks!!
kgp700 said:
thanks!!
Click to expand...
Click to collapse
cant boot into os, may be loop/hang in "x" screen.
Blackrose hboot(new ics partistion), radio 5.12, full wipe before install:d
atoyu said:
cant boot into os, may be loop/hang in "x" screen.
Blackrose hboot(new ics partistion), radio 5.12, full wipe before install:d
Click to expand...
Click to collapse
not tested on Blackrose hboot
you need Wipe ALL data/factory reset , wipe data, Wipe Cache and Wipe dalvik-cache
hey if its not too much trouble, can you upload the kernel only too??
Running this since last night and I have to say, it's one smooth ROM. Thanks! Will definitely be running it for a while
does this have the themechanger app? and do we also need to flash gapps
puttytatko said:
hey if its not too much trouble, can you upload the kernel only too??
Click to expand...
Click to collapse
What he ^ said
electrostat said:
Running this since last night and I have to say, it's one smooth ROM. Thanks! Will definitely be running it for a while
Click to expand...
Click to collapse
thank you!
puttytatko said:
hey if its not too much trouble, can you upload the kernel only too??
Click to expand...
Click to collapse
i will upload kernel only version
kuljit55 said:
does this have the themechanger app? and do we also need to flash gapps
Click to expand...
Click to collapse
gapps already included
and theme changer app included too
GoogleCalendarSyncAdapter.apk
GoogleContactsSyncAdapter.apk
GoogleFeedback.apk
GooglePartnerSetup.apk
GoogleServicesFramework.apk
AccountAndSyncSettings.apk
Vending.apk
ThemeChooser.apk
ThemeManager.apk
_-..zKiLLA..-_ said:
What he ^ said
Click to expand...
Click to collapse
he wannabe kernel only
Looks great... make it work with wifi calling and I'm sold.
Sent from my Nexus One using XDA App
smooth like buttah
atoyu said:
cant boot into os, may be loop/hang in "x" screen.
Blackrose hboot(new ics partistion), radio 5.12, full wipe before install:d
Click to expand...
Click to collapse
happened to me...try reinstalling the original blackrose hboot not a custom...then after rom is installed redo the custom hboot...
smoothest rom i've tried on this forum...no lag at all...quadrant benchmark results dropped...but it's soooooo smooth, i'm comparing it to the iphone 4s i have along side it...if this can somehow be adapted to work with other roms, no one will ever say android has a lag problem...
camalus said:
Looks great... make it work with wifi calling and I'm sold.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
thanks how to make work wifi calling?
ahuynh said:
happened to me...try reinstalling the original blackrose hboot not a custom...then after rom is installed redo the custom hboot...
smoothest rom i've tried on this forum...no lag at all...quadrant benchmark results dropped...but it's soooooo smooth, i'm comparing it to the iphone 4s i have along side it...if this can somehow be adapted to work with other roms, no one will ever say android has a lag problem...
Click to expand...
Click to collapse
wow thanks
this rom and kernel is focus to smooth
i don't use any io trick or decrease stability tweak,
so quadrant score is little not good
and i have many time compile kernel and made rom,
as result,
improve smooth = quadrant score is down
decrease smooth = quadrant score is up
have happy time with my rom
Forgive my idiocy, but I've been away from the CM ecosystem for a while.
Is there anyway to get back to the stock GB theme on my own (without requiring a separate version of the ROM)? This is easily the quickest ROM I've used, and I would imagine it's probably about as good as a GB ROM can get in that regard, but the theme is killing me right now.
CMUKyle said:
Forgive my idiocy, but I've been away from the CM ecosystem for a while.
Is there anyway to get back to the stock GB theme on my own (without requiring a separate version of the ROM)? This is easily the quickest ROM I've used, and I would imagine it's probably about as good as a GB ROM can get in that regard, but the theme is killing me right now.
Click to expand...
Click to collapse
theme is bad?
if you hope use stock theme on my rom,
open my romfile(KGPNeok-Nexroid-ExtremeS-Ver6.1EN-signed.zip) (use winrar)
and change to stock cyanogenmod 7.1.0 stable(update-cm-7.1.0-N1-signed.zip) files
following this files:
/system/framework/framework-res.apk
/system/app/settings.apk
/system/app/systemui.apk
and reflash rom
or put in adb(be careful)
upgrading from nightly to stable now. from v2 to v6.1. will post report soon.
Anyone got s2e or any other a2sd works on this rom?
alisabki said:
upgrading from nightly to stable now. from v2 to v6.1. will post report soon.
Click to expand...
Click to collapse
thanks
kyle25 said:
Anyone got s2e or any other a2sd works on this rom?
Click to expand...
Click to collapse
a2sd, d2we, d2ext is working on this rom
but it's not included
you need flash that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][U]Since You are seeing this post then you are no longer concerned about your mobile warranty[/U][/B]
/*You are solely responsible for what you see here and what you do with your device.
*
* I am only here to share my project and to see if it help other people and am really grateful that you are reading this.
* Anything done wrong by yourself will not be my fault so understand it but you will get help if needed.
* You are choosing to make these modifications to your device and am not arousing you in any way, and if
* you point the finger at me for messing up your device, than you will be trolling me :rolleyes:.
/*
Features :
Faux sound V3.0 (Awesome for all the music lovers now control the sound of your device by the way you want. Needed App like Kernel Auditor to enable it.)
Fast USB Charge Added ( Super Fast Charge your phone with the PC and USB. Needed App like Kernel Auditor to enable it.)
Supports OTG
Vibration Control Feature(Set the Vibration Intensity at your will. Needed App like Kernel Auditor to enable it.)
Custom Governors Added(Needed App like Kernel Auditor to Use default Governor as you like.)
Color Intensity Control(Change your Color Intensity as you like. Needed App like Kernel Auditor to change the intensity it.)
Init.d support added in the kernel.
Balanced for daily use Whether for High Gaming or for Normal Use
Powersuspend Feature.
Added Fast ShutDown
Added I/O Scheduler (noop,deadline,row,cfq,bfq . Needed App like Kernel Auditor to change the default Scheduler.)
F2FS Support.
Z-ram Support.
ChangeLogs :
For Complete list of ChangeLog go here : https://github.com/dev-elixir/elixir-redmi2
Download Links:
AndroidFileHost/GoogleDrive
Installation Instruction :
Download the Zip/Img and place it in your Internal/External Memory.
Reboot your Device to recovery.
Flash the file which you downloaded earlier.
Wipe Cache and Dalvik Cache.
Reboot the device.
Note :
This is only for MM(Marshmallows) based ROMs
First backup your boot.img file either through recovery or by any app or take any boot.img(Kernel file) which works in your device as a backup plan if anything happens just fallback to the previous Kernel.
Click to expand...
Click to collapse
XDA:DevDB Information
ELiX1R, Kernel for the Xiaomi Redmi 2
Contributors
abhisri1997, ketut.kumajaya, Deadpool_01,ashish94,Tarun93,salahxda6805,Beast_SLayer
Source Code: https://github.com/dev-elixir/elixir-redmi2
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: R2
Stable Release Date: 2016-04-05
Created 2016-03-22
Last Updated 2016-04-18
Reserved
Kernel Updates & Changelogs :
ELiX1R-R2 :
*Added SIO I/O Scheduler.
*Lionfish and Darkness CPU Governor Added for balanced response.
*UnderVolted upto Some Extend to reduce voltage.
*Maximum Current Input Increased to 1500Ampere*Thanks to ashish.
*SeLinux: Set to Permissive.
*Added DT2W(Added Double Tap 2 Wake)*Thanks to Hakura and Pirej
ELiX1R-R2 Build Date 01-04-2016:
*Added msm_hotplug to Hotplug.
*Added CPU Idle Governor
*Added New Governors "Yankactive, ElementalX(Happy Gaming)"
*Added Support for fast charge (AC Source)
*Fixed Microphone issue(Added Commit from Undine Hydrogen)
ELiX1R-R2 Build: 05-04-2016:
*Added Support for OTA-Feature(Download the kernel from given link and flash then forget everything you will get kernel updates directly to your phone)
*Stability Fixes.
*Link : https://www.androidfilehost.com/?fid=24459283995313698
Gives error:1 with TWRP 3.0.0.3, can not flash.
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
worked fine for mee no such errors and issues
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
Use twrp from cm 13 thread.. Worked for me.
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
Specify the ROM also which you are using...
whats the best settings for faux sound?
wakaranay said:
whats the best settings for faux sound?
Click to expand...
Click to collapse
use it as per your need and apply to boot
Awesome kernel
I am using CM 13 Nightly by EMFOX March 14th Build
This is one of the most stable and reliable kernel.
Fast charging is available even when charging from a PC or a Laptop.
Charges from 0 to 100 in approximately 2 hours.
Not much standby battery drain, only 5-8% (From night 12AM to Morning 7AM)
Working great with Brocken os. ? good work
1st i tell u im a game lover nd thanks for this great Custom kernel for our r2p
really Great Work @abhisri1997
I Played Some Heavy GAmes Like Gta lcs,Gta Sa, Gta VC,Gta 3,Dead Trigger 2,Nova 3 , BIA,3 Iron Man 3,Asphalt 8,Leos Fortune,Nd Many More Games i Played Nd Works Superb Evn i played nova 3 1 hours nd bttery drain only 17% means kernel have nice battery backup evn played heavy graphics games,
Sound Qlity juz massive man ! i install fauxsound control but not work properly ! but with kernel auditor work charm
Fast charge work nice i said its nice coz compare with berserk kernel elixer bit slow plz see that issue
i tested wirless mouse nd keybord they working awesome
overall its my testing review
used 1 day full with my fav rom tesla os
thanks man again for great work / respect @abhisri1997
omkarsnehal said:
1st i tell u im a game lover nd thanks for this great Custom kernel for our r2p
really Great Work @abhisri1997
I Played Some Heavy GAmes Like Gta lcs,Gta Sa, Gta VC,Gta 3,Dead Trigger 2,Nova 3 , BIA,3 Iron Man 3,Asphalt 8,Leos Fortune,Nd Many More Games i Played Nd Works Superb Evn i played nova 3 1 hours nd bttery drain only 17% means kernel have nice battery backup evn played heavy graphics games,
Sound Qlity juz massive man ! i install fauxsound control but not work properly ! but with kernel auditor work charm
Fast charge work nice i said its nice coz compare with berserk kernel elixer bit slow plz see that issue
i tested wirless mouse nd keybord they working awesome
overall its my testing review
used 1 day full with my fav rom tesla os
thanks man again for great work / respect @abhisri1997
Click to expand...
Click to collapse
These reviews are the things which keeps the developer boosting for their work , I am glad that you are satisfied and next time you face error try to collect some logs because I ain't having any error in my device though I can only help if the logs are there.
Is this compatible with both cm 13 and AOSP based ROMs?
Yaaaa compatible with all ROMs except miui
sajed98 said:
Is this compatible with both cm 13 and AOSP based ROMs?
Click to expand...
Click to collapse
Compatible with any marsmallow ROM...
nishan432 said:
Gives error:1 with TWRP 3.0.0.3, can not flash.
Click to expand...
Click to collapse
You are on Lenovo K3 Note and you are still trying to flash it!!!
abhisri1997 said:
ELiX1R-R2 :
*Added SIO I/O Scheduler.
*Lionfish and Darkness CPU Governor Added for balanced response.
*UnderVolted upto Some Extend to reduce voltage.
*Maximum Current Input Increased to 1500Ampere*Thanks to ashish.
*SeLinux: Set to Permissive.
Click to expand...
Click to collapse
Still no cpu hotplug?
Heresme said:
Still no cpu hotplug?
Click to expand...
Click to collapse
First tell me do you get any heating issue??
abhisri1997 said:
First tell me do you get any heating issue??
Click to expand...
Click to collapse
not much, but i think it will make battery life longer
HEY ALL I HOPE YOU ARE FINE HERE !!!
WELCOME TO OUR FORUM FOR LawRun-Kernel For poco f1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First-
Introduction
WHY WE BUILD THIS KERNEL --- THE MAIN VALUE OF THIS
we tried to give you the best experience of your phone as the following
in my opinion you will not be satisfied with the phone with the gaming kernel without the battery were last alot of time
in the same side you will have a great performance...
Second-
IF THE KERNEL SUPPORTS ANDROID Q OR PIE
We work hardly on that to give you the best experience and until Xiaomi release the Q version we will work at PIE Hardly as Q
THEN THE ANSWER IS YES THE KERNEL SUPPORTS Q AND PIE ALSO...
&&
EVERY BUILD HAVE A SPECIFIC CHANGE-LOG YOU WILL FIND IT WITH THE BUILD FOLDER
Third-
IF YOU HAVE ANY PROBLEM WHILE YOU ARE USING KERNEL JUST TRY TO TEST IT
WITHOUT ANY MODULE, CLEAN FLASH IT & TRY IT Clearly FOR Enough time...
FOURTH-
Kernel Features
- Built with android gcc
- AnyKernel3
- MIUI & Custom rom supported
- Novatek touch screen drivers (Combination for better touch experience)
- Focaltech touch screen drivers (Latest for better touch experience)
- Wireguard, Kcal, K-Lapse & Sound Control support
- Westwood TCP
- GPU hz New Configration (better For battery)
- Underclock GPU to 180mhz (better standby battery)
- Underclock CPU to 300mhz (better standby battery)
- CPU Governors add-BLU_SCHEDUTIL, smurfutil, alucardsched, smurfutil_flex, electroutil, pwrutilx, pixel_SCHEDUTIL, darknessched & pixel_smurfutil
- I/O schedulers add-Zen_SCHEDUTIL, anxiety, maple, fiops, sio & tripndroid
- Dts Eagle driver enabled
- mac80211 Injection (Kali nethunter)
- ath10k, ath9k support
- Add 88xxau Drivers (Kali NetHunter)
- added xiaomi gaming Touch boost
- Kvm enabled
- Network signal Guru support
- Separated twrp.zip Profiles.zip-for enabling profiles spectrum morpho and FKM
- Enable GPU 820mhz (gaming profile in spectrum)
- DTS Headphone:X
- Optimisations from other kernels
- Based On idle power configration (Thanks Matrix)
- More and more features check changelogs
Planned Features
IF YOU WANT TO ADD SOME FEATURES OR HAVE ANY PROBLEM YOU CAN CONTACT ME AT MOD EDIT: Link Removed
YOU CAN JOIN OUR TELEGRAM GROUP FOR MORE INFO AND SUPPORT AT MOD EDIT: Link Removed
Fifth-
WHERE IS THE DOWNLOAD LINK
Kernel.. MOD EDIT: Link Removed
Profiles.. MOD EDIT: Link Removed
Our-App.. MOD EDIT: Link Removed
You can browser Our website... MOD EDIT: Link Removed
&&
MY DONATION LINK
MOD EDIT: Link Removed
Sixth-
Bugs
-Dont Know :')
Seventh-
LawRun App
We are Introducing our New App You can use it For better experience
You can find it in our Website too..
####Installation_guide####
to Get a better experience
- Flash your rom / reboot to recovery
- Flash dfe ((Optional))
- Flash gapps ((Optional))
- FLash Magisk ((Recommended))
- Flash Kernel / reboot to recovery
reboot and enjoy
Thanks TO BE HERE AND ALWAYS BE READY TO RUN!!!!!
Source
Thanks
@Petro-Nazeh my right hand
@greenhat-Our app
@Twisted Prime help me to start
@D1stRU3T0R some tweaks & questions
@osm0sis anykernel
@arter97 f2fs
@frap129 spectrum
@abhijiths362 some optimizations
@Pierre2324 ramdisk configration
@franciscofranco spectrum profiles, some initiations & Franco source
@blitzfire3, @saikiran001 Silver-core source
@Nulled_patronxx Problem solver
Version Information
Status: Stable
Created 2020-01-10
Last Updated 2020-09-04
Awesome :laugh:
thanks for the kernel brother
Awesome kernel bro with good performance without models
Can you please add some tuning for better internet support and lesser ping in online games so this would be pretty effective for gamers also
After testing many kernels I have to say this one works the best on my fts screen. No lags, no freezings (even with gpu 820mhz and 65hz oc together). I'm on Android 10 Pixel Experience and the experience just got much better, everything seems to run so smooth...
Congratulations and thanks for your work! Sure I will keep an eye on your progress even you made it already shine.
Sent from my POCOPHONE F1 using XDA Labs
working great so far....?
Is this kernel support MIUI ROM?
hgw12 said:
Is this kernel support MIUI ROM?
Click to expand...
Click to collapse
Yes it should work,it says for Pie/Q. Please read the OP post.
Best kernel ever..
Waiting for updates
Shreyash01 said:
Best kernel ever..
Waiting for updates
Click to expand...
Click to collapse
You on which ROM?
Shreyash01 said:
Best kernel ever..
Waiting for updates
Click to expand...
Click to collapse
it's pretty stable btw.
don't need too frequent updates without major changes and fixes.
Thanks dev for spectrum support its always good to set kernel according to required needs
What does this kernel offer that all others dont? Damn xda is getting real bloated now with almost identical kernels.
Sent from my Poco F1 using XDA Labs
Advanced07 said:
What does this kernel offer that all others dont? Damn xda is getting real bloated now with almost identical kernels.
Click to expand...
Click to collapse
What u want with this kernel ? Brother xda is for developers and if they do something they can post it on xda. Always try to appreciate other work they are doing it for free. And every kernel work different with different users because everyone using desired roms and mod. So if u want to install it than try or just leave.
using gaming mode via spectrum with 66 Hz version I noticed cpu temps are really nice just under 50°C while playing Cod and pubg without any fps drops while on any kernel it always above 60°C .
Just curious to know what magic is this.
It would be great if Dev can explain just a bit what tweak is this.
better touch responses over twisted
better battery life over optimus drunk
reletively faster 4g connectivity
using it for last two days
#Impressive
I'm on stock miui 11 with optimus drunk kernel. I want to try this kernel. But what rom do i need to flash as in the instructrion?
RaphaelHam said:
I'm on stock miui 11 with optimus drunk kernel. I want to try this kernel. But what rom do i need to flash as in the instructrion?
Click to expand...
Click to collapse
First Flash stock kernel then flash this kernel.
If you have backup. If you don't have then flash the rom again and flash kernel
Will this work on latest miui global Q version?
sachin5555 said:
What u want with this kernel ? Brother xda is for developers and if they do something they can post it on xda. Always try to appreciate other work they are doing it for free. And every kernel work different with different users because everyone using desired roms and mod. So if u want to install it than try or just leave.
Click to expand...
Click to collapse
Im just saying that lately there are so many roms and kernels that are 100% identical but with a different name.
Sent from my Poco F1 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't provide support for OneUI-pie & treble ROMs, asking me if I will ever do is just a waste of time.
INFO:
If you wonder what the hell RAD Kernel is... Then let me explain, RAD Kernel is a project oriented towards people who depend on their phone every day.
RAD Kernel is designed for maximum stability.
All kernel builds are thoroughly tested before Release.
As the title says RAD Kernel per se supports AOSP ROM(s), OneUI 2 ROM(s) and it's meant to be used with it for a better STABLE experience.
RAD Kernel will NOT work with any other ROMS except AOSP & OneUI-2 (i.e no OneUI-pie & treble support).
SUPPORTED DEVICES:
G950(N/F/FD)
G955(N/F/FD)
N950(F/FD)
FEATURES:
Linux 4.4.111
Compiled with Clang 9.
O3 optimizations.
Fast, smooth and great for Daily Use!
Permissive SE-Linux.
Boeffla Wakelock Blocker.
Interactive governor as Default.
Optimized Integer SQRT. for upto 3x faster operation.
Tuned Interactive governor for better balance between performance and battery.
CPU BIG up to 2314MHz.
CPU small up to 1690MHz.
GPU OC up to 572MHz
WireGuard.
Disabled CRC by default - 30% File system performance.
Fsync toggle enabled by default, can be changed in a kernel tweaker.
TCP congestion - bic as default.
Z-RAM enabled by default and set at 2592MB.
Z-RAM compression - lzo
HMP values tuned for better performance!
and the list goes on!
ROOT:
RAD Kernel DOES NOT come with pre-installed ROOT.
You can flash the latest MAGISK to get ROOT!
SUPPORT:
Telegram Group - Click here!
Telegram Channel - Click Here!
CREDITS:
Me, for developing without time and for the struggle to test new things.
Stricted for LineageOS development.
Dr.DoubtReaper for testing my kernel images.
Samsung Open Source for their Kernel source.
Topjohnwu for magisk!
Linus torvalds for Linux!
Thanks to anyone else who made this whole thing possible, you are part of it as well!
and all the people on GitHub whom i might have cherry-picked from!
XDA:DevDB Information
RAD Kernel for Exynos8895, Kernel for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
Live0verfl0w
Source Code: https://github.com/Exynos-nigg/RAD-8895
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2021-01-07
Created 2020-10-05
Last Updated 2020-11-08
R4 (07/01/2021) [EOL]
BUGS:
DexOnPc is bugged, device wont be recognized (OneUI2 build only!)
DOWNLOADS:
Official Kernel Website - click here!
Google Drive - click here!
INSTALLATION:
NOTE! YOU NEED TO BE ALREADY ON AOSP/OneUI-2 ROM, BEFORE FLASHING THIS CUSTOM KERNEL
Download the provided zip for your device model.
Put the zip inside your storage.
Reboot to TWRP recovery.
Flash the zip and wait until it completes.
Reboot your device, and enjoy the Butter smooth experience.
CHANGELOGS:
R4(07/01/2021)
Added OneUI-2 support! (make sure to flash the OneUI-2 build)
Disabled logging and some debug stuff
Older changelogs below! =)
R3.5 HOTFIX(08/11/2020)
Unified installer zips!
Fix bootloop issues!
Switch from AK3 to AIK zips!
NOTE: This releases has no changes kernel side, but the installation zips have been changed!
NOTE: Sorry for the inconveniences caused because of the bootloops, this releases should (hopefully!) fix em =)
R3 (04/11/2020)
Disabled GFS (Gentle Fair Sleepers) for better UI performance!
Fix placebo tweaks blocker!
General optimizations!
Kill DVFS completely!
Remove excessive logging from decon, GPU drivers & touchscreen drivers!
Unified S8/S8+ kernel!
Set "westwood" as default TCP congestion algorithm!
NOTE: The kernel zips have different time labels on them because i did build them few days before but was just lazy to release them
R2 (13/10/2020)
Changed to Interactive on CPU!
Fixed sound not coming from earpiece!
Remove Audit dependency!
Enabled touch input booster!
Disabled Hotplug!
Change default IO scheduler to "deadline"!
Disable some logging!
This kernel build should be way smoother than R1!
R1 (05/10/2020)
Initial Release!
FAQ: (Read this before flashing the kernel and reporting bugs!)
Q. Gaming performace isnt good in this kernel!
A. Disable Samsung Hotplug from your preferred kernel tweaker app! Hotplug is disabled in builds from R2 onwards!
Q. Whats Fsync? should i disable it?
A. fsync transfers ("flushes") all modified in-core data of (i.e., modified buffer cache pages for) the file referred to by the file descriptor fd to the disk device (or other permanent storage device) so that all changed information can be retrieved even after the system crashed or was rebooted. This includes writing through or flushing a disk cache if present. The call blocks until the device reports that the transfer has completed. It also flushes metadata information associated with the file (see stat(2)).
Too scientific, didnt read! : In layman terms disabling Fsync gives you better performance with the risk of a Data loss/corruption during a system crash!
Q. I cant Flash NFS injector, FDE.AI, MAGNETAR and other tweakers on this kernel!
A. I have added a in-built kernel blocker to block installation of these so called "AIO kernel tweakers". You shouldnt install these tweaks in my opinion! If you still want to use a Tweaker, i prefer you use KTweak though i wont be providing support for issues if u have flashed any mods or anything of this likeliness!
Q. I have an issue and i have reported it in the XDA thread, yet nobody replied to me.
A. I might be slow in responding for issues reported in the XDA thread, if u want me to reply more faster, report it in the Telegram support group!
Q. My phone gets HOT while using this kernel!?
A. Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands.
Long answer:
* Install Termux app from Play Store * Enable screen rotation, open Termux in landspace mode * Type this command: su -c top -d 2 * A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue.
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background.
Thanks to Diep Quynh for finding this one out!
I've tried it and for some reason left top corner of the screen never responded to touch. Ex: I couldn't turn on wifi from quick toggles n back arrow in some apps as I couldn't make a touch on left corner...
I didn't collect logs as I immediately reverted back to old kernel.
arjun.reddy said:
I've tried it and for some reason left top corner of the screen never responded to touch. Ex: I couldn't turn on wifi from quick toggles n back arrow in some apps as I couldn't make a touch on left corner...
I didn't collect logs as I immediately reverted back to old kernel.
Click to expand...
Click to collapse
Could you tell me which rom and device please?
Me or any of my testers didnt find this issue.
Live0verfl0w said:
Could you tell me which rom and device please?
Me or any of my testers didnt find this issue.
Click to expand...
Click to collapse
I am on Resurrection Remix Q Using NOTE 8 (SM-950F). I will flash the kernel again n let you know if it's replicable.
Finally new kernel for my note 8
I'll give it a try
and post feedback after testing for few days
I have small question
which is better... EAS or HMP?
Thanks
Alastal said:
Finally new kernel for my note 8
I'll give it a try
and post feedback after testing for few days
I have small question
which is better... EAS or HMP?
Thanks
Click to expand...
Click to collapse
As a dev i really cant compare, but u can try it and decide for urself:good:
I have this weird bug with the earpiece still not working on the new version of the Kernel
I am using the Official HavocOS rom on my Galaxy Note 8
Alessandro2003 said:
I have this weird bug with the earpiece still not working on the new version of the Kernel
I am using the Official HavocOS rom on my Galaxy Note 8
Click to expand...
Click to collapse
Its a ROM issue, which has been already identified by the rom dev, u can join their telegram group to know this
New kernel build is up guys! =)
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Hotfix build is uploaded, sorry for the inconveniences caused by the bootloop issues =)
Excudent said:
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Click to expand...
Click to collapse
Hi mate!
1. hotplug is disabled cuz in my tests i found em to degrade performance and doesnt make much of a difference battery life wise, hence disabled and yes its a samsung implementation.
2. For OC u can pick ace2nutzers a2n kernel commits, i have tested em and it works
3. as for the undervolt, i havent tried em and probably wont be =)
4. Thanks very much, i dont need coffee or beers and stuff, u can hit the thanks button =)
Thanks and regards,
Stay Safe!
I am using this kernel on android 10 oneui
after i flashed the kernel i had weird issue concerning samsung clear case
when i close the case the screen turn on and when i open the case the screen turns off!
it acts in the opposite manner!
N950N supported?
is there any way to change to enforcing?!
Excudent said:
Currently running the newest build, runs great, thanks for the work. 6h SOT and still 50% battery. Just wondering, any reason hotplug is disabled? Does it really impact performance that bad? Or is it just samsungs implementation? Tried to build a custom version using your source (with a big core oc and an undervolt), cant seem to for some reason. Once again, thanks for the great work. Any way to buy you a Coffee?
Click to expand...
Click to collapse
But how? Can you share your settings?
HEY ALL I HOPE YOU ARE FINE HERE !!!
WELCOME TO OUR FORUM FOR LawRun-Kernel For poco f1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* I'm not responsible for any damage on your device, for X or Y reason, also I'm not responsible if you loose your alarm and got fired, anything like that, installing this kernel you renounce to make me responsible of any unwanted behavior of your device */
First-
Introduction
WHY WE BUILD THIS KERNEL --- THE MAIN VALUE OF THIS
we tried to give you the best experience of your phone as the following
in my opinion you will not be satisfied with the phone with the gaming kernel without the battery were last alot of time
in the same side you will have a great performance...
Second-
IF THE KERNEL SUPPORTS ANDROID 13 12 11, 10 or 9
THE ANSWER IS YES THE KERNEL SUPPORTS SystemExt ALSO Pixel Thermals...
&&
EVERY BUILD HAVE A SPECIFIC CHANGE-LOG YOU WILL FIND IT WITH THE BUILD FOLDER
Third-
IF YOU HAVE ANY PROBLEM WHILE YOU ARE USING KERNEL JUST TRY TO TEST IT
WITHOUT ANY MODULE, CLEAN FLASH IT & TRY IT Clearly FOR Enough time...
FOURTH-
Kernel Features
- Built with android gcc
- AnyKernel3
- MIUI & Custom rom supported
- Novatek touch screen drivers (Combination for better touch experience)
- Focaltech touch screen drivers (Latest for better touch experience)
- Wireguard, Kcal, K-Lapse & Sound Control support
- Westwood TCP
- GPU hz New Configration (better For battery)
- Underclock GPU to 180mhz (better standby battery)
- Underclock CPU to 300mhz (better standby battery)
- CPU Governors add-BLU_SCHEDUTIL, smurfutil, alucardsched, smurfutil_flex, electroutil, pwrutilx, pixel_SCHEDUTIL, darknessched & pixel_smurfutil
- I/O schedulers add-Zen_SCHEDUTIL, anxiety, maple, fiops, sio & tripndroid
- Dts Eagle driver enabled
- mac80211 Injection (Kali nethunter)
- ath10k, ath9k support
- Add 88xxau Drivers (Kali NetHunter)
- added xiaomi gaming Touch boost
- Kvm enabled
- Network signal Guru support
- Separated magisk Profile .zip for enabling profiles on our app
- Enable GPU 820mhz (gaming profile in application)
- DTS Headphone:X
- Optimisations from other kernels
- Based On idle power configration (Thanks Matrix)
- More and more features check changelogs
Planned Features
IF YOU WANT TO ADD SOME FEATURES OR HAVE ANY PROBLEM YOU CAN CONTACT ME AT Telegram
YOU CAN JOIN OUR TELEGRAM GROUP FOR MORE INFO AND SUPPORT AT Group or Channel
Fifth-
WHERE IS THE DOWNLOAD LINK
Kernel..: Link
Profiles..: Link
App..: Soon
for more features like app, profiles & performance modules...
Our Telegram Channel... Link
Our Youtube channel... Link
Our Telegram Group... Link
&&
MY DONATION LINK
Our donation: Link
Sixth-
Bugs
-Dont Know :')
Seventh-
LawRun App
We are Introducing our New App You can use it For better experience
You can find it in our Website too..
####Installation_guide####
to Get a better experience
- Flash your rom / reboot to recovery
- Flash dfe ((Optional))
- Flash gapps ((Optional))
- FLash Magisk ((Recommended))
- Flash Kernel / reboot to recovery
reboot and enjoy
Thanks TO BE HERE AND ALWAYS BE READY TO RUN!!!!!
Source: Link
Thanks
@Petro-Nazeh my right hand
@greenhat-Our app
@Twisted Prime help me to start
@D1stRU3T0R some tweaks & questions
@osm0sis anykernel
@arter97 f2fs
@frap129 spectrum
@abhijiths362 some optimizations
@Pierre2324 ramdisk configration
@franciscofranco spectrum profiles, some initiations & Franco source
@blitzfire3, @saikiran001 Silver-core source
@Nulled_patronxx Problem solver
Version Information
Status: Stable
Created 2020-01-10
Last Updated 2023-06-03
Reserved
Reserved...
I'm a bit confused - is this an old kernel which just got a major update? Does it work with Android T?
Alias X said:
I'm a bit confused - is this an old kernel which just got a major update? Does it work with Android T?
Click to expand...
Click to collapse
Android R is there & its supported
You can also test and provide any feedback if you want
Bro this is by far the best kernel in terms of battery life and gaming. My phone is 3.5 years old and it lasts whole day without recharging. Also the thermal are extremely good for gaming while on charging. Grate job.
Hitman said:
Bro this is by far the best kernel in terms of battery life and gaming. My phone is 3.5 years old and it lasts whole day without recharging. Also the thermal are extremely good for gaming while on charging. Grate job.
Click to expand...
Click to collapse
Which ROM?
Evolution x
Hitman said:
Evolution x
Click to expand...
Click to collapse
Based on Android 13?
Yea android 13
Hitman said:
Yea android 13
Click to expand...
Click to collapse
Ever compared it to No Gravity Kernel?
Never liked ngk as it draws more power and the thermals are the worst while gaming.
Hitman said:
Never liked ngk as it draws more power and the thermals are the worst while gaming.
Click to expand...
Click to collapse
What about battery life for video streaming and standby? I don't game on that phone these days. Also, with root&app or just vanilla, how do they compare?
As I told previously. Battery life is very good.
negrroo said:
Android R is there & its supported
You can also test and provide any feedback if you want
Click to expand...
Click to collapse
But Android R is Android 11, yet according to Hitman it does work with Android 13?! This is confusing.
Is it system_ext compatible? Otherwise it won't work with CRDroid anyway.
Alias X said:
But Android R is Android 11, yet according to Hitman it does work with Android 13?! This is confusing.
Is it system_ext compatible? Otherwise it won't work with CRDroid anyway.
Click to expand...
Click to collapse
Sorry its Miss understand its also supported 12 & 13.. even system_ext and pixel thermals supported
Want to report an issue. After charging above 90% when charger disconnect it still shows charging also the charging LED keeps glowing.
Hitman said:
Want to report an issue. After charging above 90% when charger disconnect it still shows charging also the charging LED keeps glowing.
Click to expand...
Click to collapse
Thats a rom issue probably
Hitman said:
Want to report an issue. After charging above 90% when charger disconnect it still shows charging also the charging LED keeps glowing.
Click to expand...
Click to collapse
Evolution X?
Be careful with Lawrun kernel, it could damage your device.