Found the Tagus Truss case for the Acer Iconia fits perfectly. Very nice leather and is able to prop it up on a table.
Sent from my DROIDX using XDA App
Hey thanks for the info.I was also wondering if anyone has tried a Motorola zoom case.It looks kinda close,but wasn't if would work or not.
The xoom is about 2 inches smaller so the cases dont work. I tried to put mine in a friends xoom case
How well does it stay in the notches when in an upright position and being used? I find my CLIP from ElectronicCrap doesn't hold the bottom of the gtablet well enough when it's in an upright position and the screen is being tapped. It drops out of the notch and falls to the bottom position. :-(
Its a very tight/ snug fit. The bottom of the gtab fits onto a pocket that is as wide as the unit. I have no fear of it coming out of this case.
Sent from my DROIDX using XDA App
Actually I meant does the tablet stay upright while set in one of the notches, not whether the tablet itself would fall out of the case when in this position. Based on the design I would assume so which is better then the CLIP case does. Just wanted to confirm. Thanks.
weezel66613 said:
Found the Tagus Truss case for the Acer Iconia fits perfectly. Very nice leather and is able to prop it up on a table.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
It would be nice if you demonstrate with a pic or 2
Thanks,
Got one!
I went to Best Buy and grabbed one. Price there was $39.99, but the G Tablet fits very nicely. I took some pictures (sorry for the low light).
The Gtab slides in there very snug and secure. The top left strap just falls in between the volume rocker. It's not too bad, you can still adjust vol up & down very easily. And that same strap falls in between the power button and the USB cover. You can stil access it just fine.
I love how the case feels. You can fold back the cover all the way back and just use the tablet straight on, or you can open it and place it in one of the 3 little slots to adjust viewing angle.
I like it, it's very comfortable to sit in bed in and use. The multiple angles allows you to have it on your lap very comfortably.
http://www.flickr.com/photos/[email protected]/6082543563/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.flickr.com/photos/[email protected]/6082543399/
http://www.flickr.com/photos/[email protected]/6082543223/
http://www.flickr.com/photos/[email protected]/6082543399/
http://www.flickr.com/photos/[email protected]/6083083744/
http://www.flickr.com/photos/[email protected]/6083083608/
http://www.flickr.com/photos/[email protected]/6082542661/
What about the charging port and the headphone jack? Are they accessible as well? I got the toshiba thrive case and i'm having to take it back since the ports were not accessible. I am thinking about picking this up instead, but I don't want to have to take the tab out of the case to charge it...
Thanks!
mb
Charging port and headphone jack are not blocked. I am attaching a pic of the side so you can see.
http://www.flickr.com/photos/[email protected]/6083468318/
jaycard said:
I went to Best Buy and grabbed one. Price there was $39.99, but the G Tablet fits very nicely. I took some pictures (sorry for the low light).
Click to expand...
Click to collapse
If you are going to pay that much, why not consider the clip case then, its officially made for the GTab and even allow docking while the tab is inside it.
weezel66613 said:
Its a very tight/ snug fit. The bottom of the gtab fits onto a pocket that is as wide as the unit. I have no fear of it coming out of this case.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
agree with above..... I purchased one tonight, great fit. Plus if I did not like it, not a huge hassle to return to the local BB. Thanks to the OG poster!
aasoror said:
If you are going to pay that much, why not consider the clip case then, its officially made for the GTab and even allow docking while the tab is inside it.
Click to expand...
Click to collapse
This one allows docking just fine. The bottom of the case has the area where the docking port cut out already. Lines up perfectly
I dont like the other case, I like how this one feels
hot case usb ebay ...
jaycard said:
This one allows docking just fine. The bottom of the case has the area where the docking port cut out already. Lines up perfectly
I dont like the other case, I like how this one feels
Click to expand...
Click to collapse
Thanks for the reply.
I can't figure out how can you slide the tab in the dock with the case on. I mean its a "just fit" with only the tablet and dock, so when I tried with my own case the couple of mm's added thickness just made it impossible to dock the tablet.
Can you kindly post a pic with the tab docked while in the case ?
Canadian distributor for clip and targus cases discussed in this thread.
Does anyone know of a shop in Canada that sells either gTab CLIP case, or the Targus truss case for the Iconia?
I'm unable to find these products at staples.ca, futureshop.ca, or thesource.ca, and I don't want to pay a bunch of duty/brokerage/shipping fees getting it here.
Thank you,
Dave
dahlungril said:
Does anyone know of a shop in Canada that sells either gTab CLIP case, or the Targus truss case for the Iconia?
I'm unable to find these products at staples.ca, futureshop.ca, or thesource.ca, and I don't want to pay a bunch of duty/brokerage/shipping fees getting it here.
Thank you,
Dave
Click to expand...
Click to collapse
You can have a try:
CLIP for G tablet: http://www.dhgate.com/pv-ff8080812ed10351012eeb2bd9911b41.html
CLIP for Acer Iconia A500:http://www.aliexpress.com/product-f...-multi-angle-for-iconia-wifi-wholesalers.html Good Luck
like it
I got the targus case too and I am liking it. Yaa it is a little bulky, but it feels well made and fits the gtab gr8! I love the three angles I can prop it. It also has some serious cushioning, making me less nervous about damaging my tab.
Got it from BB for $35 after a 10% off coupon for labor day.
Picked up rooCASE leather folio from Amazon, and it fits pretty well with the exception of the opening for the power button.
I got a handy candy case for the ipad. Great for carrying, I wouldn't mind dropping it a few times in this case. It also has velcro grips that can be adusted for propping the gtab up. Not great but definitely not bad.
Sent from my Century Eyes using xda premium
Related
Someone posted in the huge @ss thread that they thought the Kindle DX was about the same size as the GTablet.
I went ahead and ordered this:
http://cgi.ebay.com/Kindle-DX-Leath...&otn=4&po=LVI&ps=63&clkid=5004332251969071237
I'm happy with it so far, the DX is about half and inch wider, height is okay, so it can slide around a bit. I put some stick on velcro on the case and on the GTab, it isn't going anywhere now. I think I'm going to have to use superglue for the velcro on the case though, it's felt lined so it won't stick on for long. The only thing is the top elastic band is close to the power button, maybe Roebeet's electrical tape solution is in order.
UPDATE: Oh, well my fake pleather case has ding in the edge now. Maybe I need to get some of that liquid leather. ;P Happy with the sizing, just need to find something more durable. Maybe I'll use some of that new fangled electrical tape I hear is the new duct tape.
Electrical tape is the new duct tape:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need to do something like that, was thinking of a little piece of sticky backed foam, like 1/4 ince or so, think I have some perfect for that around here somewhere.
Hitting that power button is way to easy to do, need to mod the physical keys on the side somehow also, lol.
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Mike Mortazavi said:
I found an iPad case on amazon for $14.95 that has good potential. go to amazon and search for "Acase Leather Flip Book Jacket/folio for Apple Ipad 3g Tablet/wifi Model 16gb, 32gb, 64gb (Black)" in Electroincs.
Click to expand...
Click to collapse
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Thanks for the heads up. I'll keep looking.
Well, I'll let you know how the Acase you listed works... I ordered one last night.
Whoops!
Krissy
I purchased a Solo Classic iPad/eReader portfolio case from Staples that was around $30.00. The downside is that the power button is covered by one of the soft cloth corner holders, but other than that it has worked fine.
Staples item No 912506
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
bousquet said:
Looks good!! Maybe a hole punch can make your life easier.
I think this one looks promising too: http://www.amazon.com/gp/product/B002QHZ6L8
Click to expand...
Click to collapse
Did you buy this one? If so, did it work well?
ckelly33 said:
Did you buy this one? If so, did it work well?
Click to expand...
Click to collapse
I just order that case last night, will review it soon
dingoberries said:
I just order that case last night, will review it soon
Click to expand...
Click to collapse
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
nicholas621 said:
I purchased form fitting leather case for kindle DX from ebay . The G tablet fit amazingly well in it. The only problem is that the upper left strap is blocking the charger plug .
Click to expand...
Click to collapse
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
tyy10002 said:
how tight the elastic band holding the tablet? will it slide out when you carry it around? I am thinking to purchase one right now.
Click to expand...
Click to collapse
The band was tighter when I first got it (infact it was so tight that it keep randomly turn on my tablet). After a few days it loosen up so the problem resolve itself. I carry it around ,always rushing to class and it feel pretty secure imo.
Lindarose84 said:
I just ordered mine last night too! I got the genuine leather version in fuschia . Said it should be here between the 21st and the 24th so I'll definitely post some pictures when it arrives.
Click to expand...
Click to collapse
LOL! I didn't know what fuschia is. Had to look it up.
Mine is also coming on the same days as yours. Hopefully it can come before Christmas so I can so I can re-wrapped my gift.
Anyone try an Oberon Kindle case? I just found them on the web. Very nice looking.
Site link http://www.oberondesign.com/KindleDX.php
...haven't figured out cut & paste on my g tablet yet, otherwise would link some awesome case pics from their site.
Just placed and order for the genuine leather case front Amazon.will post pictures once I get it.
it2steve said:
Mike, I'd be careful. I've looked at several ipad cases but the gtab is taller and not as wide as the ipad. Most I've seen dont fit unless it's a universal case.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yep. Almost all cases for iPad do not work, since the G is wider.
Happy though with my $10 Case logic (like the zip pouch).
Found this one in E-bay. looks more comtempory and cheaper..
http://cgi.ebay.com/GREEN-POUCH-CAS...306?pt=LH_DefaultDomain_0&hash=item563456485a
They also have black.. I like the green one..
Hey guys as a lot of you have probably realized the transformer's form factor is pretty similar to a generic 10 inch netbook's dimensions. I spent a few hours the other day looking for something that is slim and would have the option to carry a few extra things (charger and cable) while offering enough protection against light bumps and scrapes. I saw a few regular black ones that if i ever left anywhere might be hard to spot. Then i saw this one for the HP mini which was black with some red accents and stretchy pockets.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The inside is lined with some fuzzy material thats super soft to the touch.
The fitment is pretty much dead on. I was afraid it wouldn't fit cuz the tab does look a bit on the long side, but here it is overlaid on the sleeve as well as sitting in it. You can also see that the zipper is the hidden type, which makes it look a little more sleek:
I don't have the dock yet (who does? lol), but i'm confident that theres plenty of room to spare judging by pictures of mockups with the two halves' thicknesses compared.
Overall, very happy with it, as i ordered it on amazon with 2 day prime and it shipped the next morning Now if only i could get this thing unbricked so i can actually use the sleeve and take it places..
Heres the link for anyone interested, 15 bucks on amazon with prime.
HP Tablet Sleeve - Black with Red Trim
looks good.
I bought one of these because of your recommendation. I got it yesterday, and I am pleased with it. It's a little thicker than I expected. Fit's perfect in length, and a little extra width, which is expected given it's form factor. There is a good amount of padding for protection. The zipper is protected from the inside, so no worries about it scratching the bezel. There's plenty of room even with the keyboard dock. I do kinda wish there was a strap/handle that you could hook your fingers through. It has a few pockets on the outside that you can slide things like usb flash or sd cards. You can squeeze the charger in one, but not comfortably. That's what the 16 hour battery life is for.
I got one of these too and its great!
timtlm said:
I bought one of these because of your recommendation. I got it yesterday, and I am pleased with it. It's a little thicker than I expected. Fit's perfect in length, and a little extra width, which is expected given it's form factor. There is a good amount of padding for protection. The zipper is protected from the inside, so no worries about it scratching the bezel. There's plenty of room even with the keyboard dock. I do kinda wish there was a strap/handle that you could hook your fingers through. It has a few pockets on the outside that you can slide things like usb flash or sd cards. You can squeeze the charger in one, but not comfortably. That's what the 16 hour battery life is for.
Click to expand...
Click to collapse
I'm glad that theres room to spare with the dock, as i will probably put a small notebook in there for those instances where you just need to use paper. For the money paid, it really is a pretty good deal it seems.
Thanks for the post! I actually have that same case for my HP Mini (but with the white inner lining) and was wondering if it would fit my TF when it comes in Monday.
Now I know that it will, Thanks!
I have this case as well and it works for me I don't have the dock yet but as others have said it should have plenty of room. I found that the charger fit best in the top small pocket on the front (the one with the plastic piping on the top edge). Having the piping there helps to keep the charger from falling out. I get $10 off $20 discount cards for Office Max all the time. At my local office max this case was going for $20.99 so $11 after the discount made it a no-brainer It looks like it will also allow you to nest cases. If you buy a leather portfolio style case you could leave that attached to the TF and slide it into the neoprene case for extra protection Double-bagging, if you will.
That 'piping' on the top is actually a handle that is on both sides of the case!
I got the same case at MicroCenter in Minnesota for 9.00 in the discount section. Fits the Tablet with or without dock very well. Pouches work creat for power brick and cable. It is soft on the inside without the lint problem some of them have. IMO this is the perfect case.
P.S. I DONT NEED NO STINKING "Smart Cover". A keyboard/dock that covers the light sensor for hibernation when closed, doubles the battery life, adds full USB ports and SD slot.... NOW THAT IS A DAMN SMART COVER. (plus I got it on buy.com for only 60 bucks more that that limp vinyl feminine napkin with magnets that apple calls a cover)
fropirate said:
That 'piping' on the top is actually a handle that is on both sides of the case!
Click to expand...
Click to collapse
wow, I didn't even think twice about that until you mentioned it...that is really clever. The design of this case is very thought out yet simplistic. I like it a lot.
Any 10" Netbook sleeve will fit it. I am using one by Built.
One of the benefits of a netbook sleeve as well is if/when you get the keyboard, it will still fit and be useful.
I have the same sleave and it fits the TF+dock just fine.
brunes said:
Any 10" Netbook sleeve will fit it. I am using one by Built
Click to expand...
Click to collapse
Unfortunately not the case, I bought one of the basic neoprene slip kind and it was way too small. This one however looks awesome, I think I'm sold.
I got this case too. Fits rather snugly and you need to position the tablet to sit into the groove at the bottom to ensure a good fit.
Otherwise a great case and as mentioned fits fine with the dock.
The piping handle too is a great touch.
I can confirm as well that the Transformer fits nicely with the dock attached.
Sent from my GT-I9000 using XDA Premium App
I reused my netbook case. If you want nice and snug fit then this is the one to get.
http://www.amazon.co.uk/Tucano-Easy...ELSK/ref=sr_1_6?ie=UTF8&qid=1308668043&sr=8-6
deadman3000 said:
I reused my netbook case. If you want nice and snug fit then this is the one to get.
http://www.amazon.co.uk/Tucano-Easy...ELSK/ref=sr_1_6?ie=UTF8&qid=1308668043&sr=8-6
Click to expand...
Click to collapse
Is it snug without the keyboard dock attached? Or is there a lot of unused space inside, since I suppose it was designed for a netbook which is thicker.
Found one of these at Wal-Mart on the clearance rack for 10 bucks. It had a foam insert to help it keep shape on the shelf and I keep it in there for added protection for my screen since I don't have the dock yet. This thing works very well and I love the "handle" on top. The zipper closure on top is also very snazzy.
Can't hurt that the red color also matches my iFaraday stylus!
I figure they decided we're used to getting hosed on the pen and on price.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had to ask for them; they weren't yet on the shelves, but they are in stock, at least at my Best Buy.
Hardshell and Folio
I bought both today, but I figure I will just stick to the Folio case, see as the hardshell seems kinda pointless overall for my tablet. The Folio seems to fold into a stand, however mine didn't sit too well, I have a few photos but I hit my limit on upload I can post more if you need!
Edit: The Folio in Landscape kind of prevents pen button access, I dunno if this is just the way mine is cut or what...
Hmm. The way it rests in mime, pen access is unobstructed.
Saw from the other thread, that there are cutouts for speakers and camera. Also just noticed from the title, no place for the pen.
For $50 and no pen holder, I'm happy I didn't waite and got the Platinum case for the Galaxy tab for $15 cheaper. Does the same thing, with the stand, etc. Just a couple of easy modifications with sicsors and a hole punch.
glitzbd said:
I bought both today, but I figure I will just stick to the Folio case, see as the hardshell seems kinda pointless overall for my tablet. The Folio seems to fold into a stand, however mine didn't sit too well, I have a few photos but I hit my limit on upload I can post more if you need!
Edit: The Folio in Landscape kind of prevents pen button access, I dunno if this is just the way mine is cut or what...
Click to expand...
Click to collapse
So does your Flyer fit in your folio case with the hard shell on also because I have a tpu case on my flyer and I want to keep it on but hope to still be able to fit it in the folio case?
Sent from my HTC Flyer P512 using XDA Premium App
Doesn't fit
Yeah vj092887 it does not seem to fit with the hardshell attached although I didn't really push very hard to get it into the folio when it had the shell on...
I have both of the RocketFish cases and I would not recommend putting the tablet in the leather case with the hard shell attached since it is too large and would likely stretch out the leather.
Warning about the RocketFish hard case. I removed it to add a microSD card and it was scuffing the aluminum on the Flyer. No scratches, but some aluminum shavings did come off. Although the aluminum is pretty to look at, it scuffs and scratches very easily. I honestly prefer the more resilient plastic, like on the Samsung Galaxy Tab.
I used the leather case from them and noticed it messed up my Xagg shield... so I had Best Buy replace the shield. I returned the case and got the zip up case that fits the 7" tablets. Much better! I -may- spend the $29 for the hardcase if I notice a scratch or two on the back.
-- Insert 2 cents here --
Looks similar to the Targus Truss case for Playbook. That has no hole for camera (but I don't use anyway) but does have pen holder. The Targus case just needs a strip of Styrofoam from the packing cut and inserted for the Flyer to fit in nice and tight.
I found this today http://www.amazon.com/gp/aw/d/B0055EPO8O/ref=redir_mdp_mobile/183-0174799-8151867
Price is reasonable but I don't know how this fares to the rocketfish since I won't have my view until this friday.
lovethyEVO said:
I found this today http://www.amazon.com/gp/aw/d/B0055EPO8O/ref=redir_mdp_mobile/183-0174799-8151867
Price is reasonable but I don't know how this fares to the rocketfish since I won't have my view until this friday.
Click to expand...
Click to collapse
No speaker holes or pen holder?
I have a journel case that has the HTC logo on the front... (got it off ebay for $44.39 AUD / $47.63 USD - expansys AU now stock it for cheeper here) not entirely sure if it is an official HTC case ... but:
The build quality is great
Fits really well
It has a place for the pen
It looks good and is barely bigger than the flyer
It has magnetic clips
It has a place for the pen
I have been using it for about a month and it doesn't seem to mark the flyer (unlike the rocket fish case)
Here is a pic of it from the net:
I will post some more of mine if you guys want
Kris
i00 said:
I have a journel case that has the HTC logo on the front... (got it off ebay for $44.39 AUD / $47.63 USD - expansys AU now stock it for cheeper here) not entirely sure if it is an official HTC case ... but:
The build quality is great
Fits really well
It has a place for the pen
It looks good and is barely bigger than the flyer
It has magnetic clips
It has a place for the pen
I have been using it for about a month and it doesn't seem to mark the flyer (unlike the rocket fish case)
Here is a pic of it from the net:
I will post some more of mine if you guys want
Kris
Click to expand...
Click to collapse
Yes please! All the pictures I've found for this case are that same picture.
Also, does the front flap fold behind it?
nebaneba said:
Yes please! All the pictures I've found for this case are that same picture.
Also, does the front flap fold behind it?
Click to expand...
Click to collapse
Sorry about the poor picture quality don't have a great camera... but here are some images:
If you want some more tell me what of and i'll post
Also the only thing missing is holes for the speakers ... and i actually don't think it needs them - the sound is still great - crisp and loud!
Kris
Too bad when you stand the case up it doesn't rotate to landscape because it only has one landscape mode not upside down landscape
Sent from my PG41200 using XDA App
OtterBox Commuter Review
Just got my OtterBox today, so thought I'd toss out some thoughts for those of you on the fence.
Those of you that aren't familiar with the OtterBox cases check out some info here OtterBox Case Series
Fit: This thing fits so effin nicely! I've tried the Commuter series on a few devices...and this seems to fit more snug than on other phones. The 3D Commuter I had seemed to bunch up ever so slightly. Same with Dell Streak and Evo 4G versions. My Galaxy S phone was pretty snug as well. Seems like they got this one right...cut-out for the mic doesn't look like it'll get blocked over time if the rubber gets loose.
Button overlays: They stick out a bit...which is the norm for Otters. I find them to be pretty handy. The power button especially, as most would agree without a case it can be a bit of a pain to press. Nice that I can stop myself from filing a fingernail on the volume rocker too. Much easier to press than the few other cases I've tried as well.
Dust Flaps: Tight and secure...without being annoying. Easy to open...plenty of room to plug in your cables. Not too stiff. Seems like they'll hold up for awhile. I've had some others that have fallen off way too early in the case life. Noticed the flap over the HDMI / USB ports DOES make the phone wobble a bit when using kickstand. Not a big deal...but might be an issue for some.
Cut-Outs: My only complaint here is with the kickstand cut out...seems a bit too snug. Seems to get caught a tiny bit on the rubber around it as you try to extend the kickstand. Pretty sure it'll straigthen itself out over time tho. Camera cut-out is nuttin special...just a rectangle around the lens and flash. Has cut-outs for the noise cancelling mics on the back as well.
Appearance: LOVE how it doesn't take away from the MoPho's unique look. I've gotten compliments on my phone for how slick it looks with the cut off corners. Yea.it's the little things that count. This isn't a case that hides the look of your phone...it accents the goodness!
General Feel: Not too slick....not too grippy. Slides in and out of pockets just fine. Definitely doesn't feel like I'll drop it. Always a good thing in my book. **Edit: After several hours of use, I've noticed the edges are kinda sharp. The hard plastic, when held in certain spots, can be agitating to your skin with it's sharp plastic.
So...in conclusion: I think this is the case I'll stay with for awhile. I've always enjoyed the protection afforded by OtterBox cases...and this should be no different.
Be aware, unless you rip out the insert on the HDMI dock it won't fit. You will have to remove the case for dock use.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just ordered one from amazon after reading this. This would be perfect if they would have made a clip for it like the defender. I tried the defender at RS but it was just too much, this seems to keep the bulk down but still give that otterbox protection.
Does the commuter have a built in screen protector?
Doesn't look like it
AJC9000 said:
Does the commuter have a built in screen protector?
Doesn't look like it
Click to expand...
Click to collapse
No...comes with a screen protector you can apply tho. Doesn't cover the capacitive buttons tho.
Nice review
And I as a Otter Box commuter owner i agree it's better than the one I had on my 3D...
PS great lock screen ... name of it if i may?
Thanks ...
Sent from my MB855 using XDA Premium App
Yogi3 said:
Nice review
And I as a Otter Box commuter owner i agree it's better than the one I had on my 3D...
PS great lock screen ... name of it if i may?
Thanks ...
Sent from my MB855 using XDA Premium App
Click to expand...
Click to collapse
Agile Lock Screen
I opted for the Defender, which looks like the Commuter except it has 3 more levels of protection. LOVE IT!
I'll post some pics tomorrow morning.
Bandage said:
OtterBox Commuter Review
....
Be aware, unless you rip out the insert on the HDMI dock it won't fit. You will have to remove the case for dock use.
View attachment 684554View attachment 684555View attachment 684556
Click to expand...
Click to collapse
So this case will fit in the dock with the insert removed?
bcoutlander said:
So this case will fit in the dock with the insert removed?
Click to expand...
Click to collapse
Yeah with modification. Not pretty, but it works. I returned my dock already (since we don't need it anymore for root) or I'd snap some pics. Anyone else confirm this please?
FYI.....Case does not work with the Cardock
Seriously? Crap. I thought someone said it did in another thread... My case just came in, but I was gonna go buy a car dock this week. :-(
pzztgotbagz said:
FYI.....Case does not work with the Cardock
Click to expand...
Click to collapse
Sent from my MB855
http://www.newegg.com/Product/Product.aspx?Item=N82E16875992573
update: oh they went out of stock quick i guess, i was able to snag one though....
newegg's price is good, but thats about how much theyre going for online. retail stores would rip you off, but online price seems to be around the 22-25 dollar range.
lowest amazon price is 22.93 with free shipping from a 3rd party seller.
I bought mine for about the same price from a 3rd party seller on amazon and received it in 2 days (mainly cuz he was in the same state).
i got mine for 19.99 free shipping on amazon. love the case, felt so scared holdin it before.
I managed to get the Commuter to fit the car dock with minimal modification.
1- The rubber plug over the USB ports has to go.
2- Remove the ~1" bar over the USB ports from the outer shell. This part is indicated in green in the photo.
3- Shove the whole thing into the navi dock. Still tight, but it works.
Just copped ($22 on Amazon w/free shipping.) Propz - good review
Ok, I now have my Prime with dock and I am in now in need of a Man Bag. Looking to carry the Prime, my phone, keys, wallet, mp3 player, etc. Anybody using a Man Bag, or have suggestions for a quality bag that will hold all my crap yet look good in the process? Not looking for a huge bag, just enough room to fit all my stuff. Any suggestions.
This just arrived today, looking forward to going home and testing it out as it looks awesome: http://www.amazon.com/CaseCrown-Ver...B2T8/ref=sr_1_1?ie=UTF8&qid=1327336500&sr=8-1
crimsonnight said:
This just arrived today, looking forward to going home and testing it out as it looks awesome: http://www.amazon.com/CaseCrown-Ver...B2T8/ref=sr_1_1?ie=UTF8&qid=1327336500&sr=8-1
Click to expand...
Click to collapse
Update and let me know how it works - looks pretty sweet!
Yah..that does look sweet. Please update it as you find your likes and dislikes.
Could you take some pics of "Real world" stuff in there? what it looks like with the tab/dock...pens...pen drives...stuff a non marketing person would do with it.
I recently went to Office Max to get my dock (see the "where is everyone buying their docks" thread) and saw the coolest thing.
it's exactly the same bag i have for my laptop that i love but for tablets
http://www.officemax.com/technology...d Accessories&ci_src=14110944&ci_sku=22970395
while not a traditional "man" bag...it's a cross imo between shoulder/scout/backpack.
This is the bag I got: http://www.amazon.com/gp/aw/d/B0046SNNRY/ref=mp_s_a_1?qid=1327358978&sr=8-1
I bought mine from Target for $24. The prime fits perfectly in the inside pocket without any case. Should fit in the other inside pocket with a case. My case arrives this week.
Sent from my Galaxy Nexus using xda premium
VivianC said:
This is the bag I got: http://www.amazon.com/gp/aw/d/B0046SNNRY/ref=mp_s_a_1?qid=1327358978&sr=8-1
I bought mine from Target for $24. The prime fits perfectly in the inside pocket without any case. Should fit in the other inside pocket with a case. My case arrives this week.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I bought that one too. The prime will fit in the larger slot with a case. It will not fit in the smaller slot with a case. The dock will fit either slot by itself and the prime with the dock attached fits perfectly in the larger slot. It really is a nice case. I like the color inside too.
I picked up the Messenger Bag/Man Purse/Murse at Best Buy last week.
http://www.bestbuy.com/site/Targus+...8343234169&skuId=1805623&st=targus&cp=4&lp=38
Unfortunately, they were on sale for 24.99 last week, and they are $35 now.
I love it. Comes with a Shoulder Strap so I can wear it like a Murse. Comes with a bunch of little pockets inside, one velcro pouch for a cell phone or MP3 Player, has 2 pen/stylus holders. And it is still small.
There is a sleeve inside that fits the Transformer Prime very snug, so it will not move around. You just stretch the interior sleeve and it fits right in.
Plus, they have these IN STORE at Best Buy, just look back by the Laptop Bags!
I got this one. Has two compartments so it fits the Prime and keyboard separately or docked.
http://www.amazon.com/gp/product/B002N8726W/ref=oh_o00_s00_i00_details
I got this one back when I had my xoom, fits the prime and dock great and has room for other stuff without being too bulky. I also like how far down it zips so your not hunting for tiny stuff at the bottom.
http://www.amazon.com/Kensington-Sl...r_1_1?s=apparel&ie=UTF8&qid=1327444878&sr=1-1
clankfu said:
I got this one. Has two compartments so it fits the Prime and keyboard separately or docked.
http://www.amazon.com/gp/product/B002N8726W/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
+1 on this case. Picked one up at Wally World. It was $25.
This case is manly enough to cover the question asked.
http://www.maxpedition.com/store/pc/8-x-10-Pistol-Case-Gun-Rug-13p916.htm
they also have a 12 inch. I think it is for netbooks.
It also comes in 3 colors.
VivianC said:
This is the bag I got: http://www.amazon.com/gp/aw/d/B0046SNNRY/ref=mp_s_a_1?qid=1327358978&sr=8-1
I bought mine from Target for $24. The prime fits perfectly in the inside pocket without any case. Should fit in the other inside pocket with a case. My case arrives this week.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I got this and love it. I use it with and without the keyboard.
The prime without the dock also fits perfectly in the small slot. It seems snug the first time but it becomes the perfect fit.
crimsonnight said:
This just arrived today, looking forward to going home and testing it out as it looks awesome: http://www.amazon.com/CaseCrown-Ver...B2T8/ref=sr_1_1?ie=UTF8&qid=1327336500&sr=8-1
Click to expand...
Click to collapse
Update as requested CheeseMcGee
Awesome bag! I want to start using it instead of my usual everyday bag, it has a hell of a lot of padding and fits the prime very snuggly, so I just need to get over my misconception that the prime is made of brittle china and properly integrate it into my life. It has a lot of pockets which is awesome as I love to keep stuff separate, looks really nice imo - from my experience so far I would highly recommend it
http://www.amazon.com/gp/aw/d/B004IDKH3K/ref=aw_d_var_2nd_apparel_txt?qid=1328025383&vs=1&sr=8-3
Got this messenger bag for my tablet and some of my books for class. Check it out very durable and great quality and I believe it is water proof
Sent from my MB855 using Tapatalk
dilligaf said:
+1 on this case. Picked one up at Wally World. It was $25.
Click to expand...
Click to collapse
I just picked one up for myself and my poetic case fits perfectly alongside my docked TFP. This way I have the option of undocking and slipping it into the Poetic case.
http://www.amazon.com/CaseCrown-Ver...ger-Chocolate/dp/B003BLB2T8/ref=cm_cr_pr_pb_t
Just snagged this "Murse" to carry my tablet and accessories in.
God... I'm so trendy!
Sent from the last remaining Prime.
I got this Targus Netbook bag. Works perfect with the dock!
http://www.amazon.com/dp/B002N8726W...e=asn&creative=395093&creativeASIN=B002N8726W
Timbuk2 freestyle netbook messenger
I got a Timbuk2 Freestyle Messenger today and it fits my Prime with the dock attached perfectly. It is well made out of thick cordura with a waterproof lining, a separate internal pouch for the tablet that is microfiber lined and secured with velcro, and plenty of smaller pockets for your keys etc. I got it directly from them and the color i bought is on sale for $39.
I can't post a link yet but you can find them by googling the title of this post.
I am not affiliated with them, it's just a great product.
CheeseMcGee said:
Ok, I now have my Prime with dock and I am in now in need of a Man Bag. Looking to carry the Prime, my phone, keys, wallet, mp3 player, etc. Anybody using a Man Bag, or have suggestions for a quality bag that will hold all my crap yet look good in the process? Not looking for a huge bag, just enough room to fit all my stuff. Any suggestions.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Race
After much research and deliberation I settled on this...
Hmm, due to me being a nube I can't post outside links but searching ebay with this number works (120758831139)
Question is, which will arrive first? My Purple Prime or my Vertical Messenger (Satchel)? The Prime eta is February 20 and due to Chinese new-year the HN bag is due by March 1.
---------- Post added at 02:08 PM ---------- Previous post was at 02:02 PM ----------
It appears the Vertical Messenger has taken the lead. I now have a tracking number for it with UPS.
I bought this and it works great, STM Bags 11" Jacket (Black/Green)
http://www.amazon.com/STM-dp-2140-1...r_1_7?s=apparel&ie=UTF8&qid=1328105348&sr=1-7