Problems watching videos - Galaxy S II Q&A, Help & Troubleshooting

I have a problem watching videos on my SGS2. When I put a .mkv video on the SD card and watch it I cant fast forward the video. If I reboot the phone and try to open the .mkv movie it wont work. What is the problem?

Specs for the file? Same for all mkvs? Does it work on other, non-stock players?

B3311 said:
Specs for the file? Same for all mkvs? Does it work on other, non-stock players?
Click to expand...
Click to collapse
It works on few players. But not all. But I still cant fast forward and when i reboot the phone the movie wont work.
Specs? How do you mean? It's a mkv movie if its what youre asking.

Resoluti0n, framerate, audio etc.
Reason I ask is that all my own mkvs play flawlessly but I ripped them from DVD and encoded them myself.
A friend gave me aTV series on mkv, probably from a, er, doubtful source, and those files stutter like buggery on stock, play fine on mobo.

Badly or incorectly encoded media can exibit such behaviour .

B3311 said:
Resoluti0n, framerate, audio etc.
Reason I ask is that all my own mkvs play flawlessly but I ripped them from DVD and encoded them myself.
A friend gave me aTV series on mkv, probably from a, er, doubtful source, and those files stutter like buggery on stock, play fine on mobo.
Click to expand...
Click to collapse
I have no idea how to get the resolution, framerate of the video. But I know the audio of the .mkv.
Maybe I should try to convert it and see if it works. But I dont know if it will be 1080p if i convert it. Will try and see.

Also try these players,
http://forum.xda-developers.com/showthread.php?t=1217776&highlight=Best+Player
Regards.

I also had a Tv series with mkvs that would not FF (also on GT P1000), but if i ran them through mkvtoolnix everything was fine again. So it's not a codec problem but a faulty container. All you have to do is to disable header compression on all streams in mkvtoolnix. It's very fast ... less than 20 sec/ GB.

ibahungrig said:
I have no idea how to get the resolution, framerate of the video. But I know the audio of the .mkv.
Maybe I should try to convert it and see if it works. But I dont know if it will be 1080p if i convert it. Will try and see.
Click to expand...
Click to collapse
Gspot will give you all the info.
Convert anyway - worth a try, and 1080 is a waste of space and CPU on the SGS2.

mdalacu said:
I also had a Tv series with mkvs that would not FF (also on GT P1000), but if i ran them through mkvtoolnix everything was fine again. So it's not a codec problem but a faulty container. All you have to do is to disable header compression on all streams in mkvtoolnix. It's very fast ... less than 20 sec/ GB.
Click to expand...
Click to collapse
Thanks for your help. I downloaded mkvtoolnix but I cant find an option how to disable header compression.

Extra options (Tab in the vertical middle of the form) - Compression - None.
Do it for video, audio and subtitle stream.
You can extract subtitle and watch it with Mobo player (HW +SW decoding) otherwise embedded subtitles only works with mVideoPlayer (only HW decoding).

mdalacu said:
Extra options (Tab in the vertical middle of the form) - Compression - None.
Do it for video, audio and subtitle stream.
You can extract subtitle and watch it with Mobo player (HW +SW decoding) otherwise embedded subtitles only works with mVideoPlayer (only HW decoding).
Click to expand...
Click to collapse
I tried that out aswell but didnt work. Can it be because the file is over 4gb which is the max capacity SGS2 can have? The file is 4.9gb. Is there any way I can divide it into two parts or something to get around this problem?
I divided the file with the program you told me about. Thanks for your help all. The problem was the file, it was over 4 gb.

http://forum.xda-developers.com/showthread.php?t=1244464

Related

[Q] Atrix not supporting mkv video?

My Atrix doesn't seem to be able to play any of my .mkv video files. Is anyone else having this problem? My captivate worked fine with the exact same movies. I have also tried downloading other video players such as rockplayer, mVideoPlayer and doubletwist but I am getting the same "sorry, this video cannot be played" or "file cannot be displayed or played" message.
i have also tried the copying the videos to both my external sd card and my internal memory, no luck.
The captivate seemed to support a lot of video formats with out resizing ....what does the atrix support
Sent from my MB860 using XDA App
Yeah, Im having problems with that too. All my videos are either too small or can't play. Anyone know the ins and outs of the attrix media capabilities?
Ok, I just tried an .mp4 file with no success as well. this can't possible be correct. I tried 5 different media players, including the stock one.
mp4s work for me, but not mkvs with the same settings. Tegra 2 only supports baseline H264.
The Atrix only supports (3GPP) .3gp and MPEG-4) .mp4 video formats.
Codec support is for H.263, H.264 AVC, MPEG-4 SP and VP8
So far I haven't gotten the phone to play any of its said supported videos. I too had the captivate and am now very disappointed in the Atrix codec support. Maybe we were spoiled with the captivate?
Only AVI's play. Nothing else. Hopefully this will be remedied by Moto before anyone else.
eatkabab said:
So far I haven't gotten the phone to play any of its said supported videos. I too had the captivate and am now very disappointed in the Atrix codec support. Maybe we were spoiled with the captivate?
Only AVI's play. Nothing else. Hopefully this will be remedied by Moto before anyone else.
Click to expand...
Click to collapse
That's because mostly any MPeg4 or H.264 video you try to play is high-profile. The Tegra 2 apparently only supports the baseline codec.
so are there any downloads out there that would supply the necessary codecs, or maybe another player (i'v already tried 5). i thought i got away from having to convert all of my videos when i got rid of my iphone
What pisses me off is I cannot even use DLNA to stream video to my phone since NOTHING is compatible.
I'm able to stream from my DVR and my Windows Media systems to any PC or DLNA equipped device in my house except for my Atrix.
The list of things that I like about this phone are slowly being overpowered by the list of crap that I should have to be dealing with.
This is supposed to be the "most powerful smartphone" on the market.
My 3 year old 3GS does more with less hacking.
And yeah... I threw up a little in my mouth when I said that as I hate having to hack my phone to get basic functionality.
rjohnstone said:
What pisses me off is I cannot even use DLNA to stream video to my phone since NOTHING is compatible.
I'm able to stream from my DVR and my Windows Media systems to any PC or DLNA equipped device in my house except for my Atrix.
The list of things that I like about this phone are slowly being overpowered by the list of crap that I should have to be dealing with.
This is supposed to be the "most powerful smartphone" on the market.
My 3 year old 3GS does more with less hacking.
And yeah... I threw up a little in my mouth when I said that as I hate having to hack my phone to get basic functionality.
Click to expand...
Click to collapse
Try Subsonic server/app combo. Works great for me.
jiggytom said:
Try Subsonic server/app combo. Works great for me.
Click to expand...
Click to collapse
Doesn't work with DirecTV DVR's.
I have the whole home service so I can play any movie on any TV or PC in my house.
Any DLNA equipped device works too... except for the Atrix of course.
I was able to play a 700+ MB avi file.
I was able to play tron in 264 mkv fine here.
yiyo said:
I was able to play tron in 264 mkv fine here.
Click to expand...
Click to collapse
can you let me know how large the file was?
diablo009 said:
I was able to play a 700+ MB avi file.
Click to expand...
Click to collapse
yiyo said:
I was able to play tron in 264 mkv fine here.
Click to expand...
Click to collapse
It would be nice if you could post what method you used and the steps you took to get your Atrix to play so that we too could enjoy videos.
eatkabab said:
So far I haven't gotten the phone to play any of its said supported videos. I too had the captivate and am now very disappointed in the Atrix codec support. Maybe we were spoiled with the captivate?
Only AVI's play. Nothing else. Hopefully this will be remedied by Moto before anyone else.
Click to expand...
Click to collapse
Yeah right. Motorola will fix it.
I bought a Tegra 2 device that can't play my 720p mkv movies. Perfect.
edgeicator said:
mp4s work for me, but not mkvs with the same settings. Tegra 2 only supports baseline H264.
Click to expand...
Click to collapse
mkv is a container, h264 is a codec
almost all phones can decode h264, xvid, divx, x264, etc, BUT in MP4 container.
just remux your files without recompress, its very quickly, just a few seconds using some program like YAMB or staxrip's just mux option.
if I have an avi file compressed with xvid my x10 can not play it with hardware decoders, but if I mux this avi in an mp4 file my x10 can play it very smooth, and remux its just take a half minute.
http://yamb.unite-video.com/
btw, if you want test, put any HD youtube video (MP4 high profile, wich is playable on atrix) and remux into MKV without recompress, I mean just mux, and try to play on atrix.
Chinese tablets and some branded phones can recognize MKV container, but it doesn't make a difference because make a playable video for your mobile it will take just a few seconds
Alejandrissimo said:
mkv is a container, h264 is a codec
almost all phones can decode h264, xvid, divx, x264, etc, BUT in MP4 container.
just remux your files without recompress, its very quickly, just a few seconds using some program like YAMB or staxrip's just mux option.
if I have an avi file compressed with xvid my x10 can not play it with hardware decoders, but if I mux this avi in an mp4 file my x10 can play it very smooth, and remux its just take a half minute.
http://yamb.unite-video.com/
btw, if you want test, put any HD youtube video (MP4 high profile, wich is playable on atrix) and remux into MKV without recompress, I mean just mux, and try to play on atrix.
Chinese tablets and some branded phones can recognize MKV container, but it doesn't make a difference because make a playable video for your mobile it will take just a few seconds
Click to expand...
Click to collapse
I'd like to see some proof that high profile plays on the atrix currently. Main profile with tweaking plays choppy, but high profile in my experience does not work at all. Also as a clarification, x264 is a fully functional h264 encoder, and can be used to create bluray quality video
There are a few video containers supported by the player shipped with the atrix.
*.avi
*.mp4
*.3gp
Having said those, the codecs that can be inside an AVI file are as follows:
Video: xvid/divx (h.263)... owait noone cares about the other ones. At any res 1080p and lower resized to MOD16
Audio: mp3... again noone cares about the other ones
Inside the MP4 you can have the following:
Video: xvid/divx/h263/h264 (in BASELINE or HIGHLY MODIFIED MAIN profiles only) at any res 1080p and lower resized to MOD16
Audio: AAC (LC or HC; avoid multichannel as it creates an annoying echo) /AMR
*.3gp is the format that a lot of current handheld devices can capture in. They have their own specific codecs depending on the device, but video that I captured with my old sony ericsson s710a plays flawlessly on all my newer devices.
As for MKV... I wish it supported it. I started using QQplayer for MKV with very low bitrate xvid/mp3 combos for subtitles and they play OK, just not well. Settings I have found that work well with QQplayer and xvid for MKV is any flavor of 480p mod16 resized @~1500kb/s, and mp3 of an ABR of 112 downsampled to 44.1khz. h264 inside mkv though... not happening.
Care to explian where's the "mux" option in the program you linked?

[Q] How can I play MKVs on my phone WITH sound?

I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
OGG Vorbis audio track? Try Moboplayer. I just found out it'll read and play it, subs included.
That's what I'm using, Moboplayer and the stock player.
No sound from either.
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
well i have sound with stock player and mkv.... what sound is it ? DTS, DD ?
i use Vplayer, works fine for me. shows picture sound and subs
SuperTheMando said:
I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
Click to expand...
Click to collapse
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
SuperTheMando said:
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
Click to expand...
Click to collapse
The Mobo Player app should have an option to point you to the correct codec.
If you don't install the codec then it will only play the same formats as the stock video player.
I use mVideoPlayer, works fine for all of mine.
But I think DicePlayer has the best support for audio codecs, though it's only free for a trial period and doesn't support embedded subs (AFAIK).
I have these installed permanently as one of them usually does the job, I usually try stock first followed by mobo, then rock with Act1 and QQ as backups.
Dice is probably the best but isnt free.
Dice
mobo
rockplayer
act1
qq player
I have tried pretty much all other players, honestly dont waste your time or money on any of the others.
EDIT - sorry I forgot, since moving to this Phone I hace scrapped qq for everything and rock for HD stuff as it doesnt seem to decode as well as stock or mobo, always try stock first.
On my GS2 I do not see any option Mobo Player to point me to the correct codec, any clue?
MyrddinLXXIIX said:
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
Click to expand...
Click to collapse
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Mobo is good. it's free.
Mobo's ffmpeg codec support almost all codecs.
but ffmpeg sw codec use CPU more than HW codec.
when playing 720p H.264+DTS mkv. mobo ( or rock ... ) sw codec use almost 100% CPU power.
Stock Player and DicePlayer use only 20-40% of CPU power. ( Audio codec use cpu.. )
SW codec players use lossy color convert and resize routine.
dithering or color loss will occur. ( you can see when playing dark scene )
HW Codec's Pros.
1. Performance ( Can Play 1080p )
2. Battery
3. image quality
Cons.
1. Codec compatibility ( but SGS2's HW codec is AWESOME. )
2. not supported codecs ( RMVB, VP6/7.. )
** dice player 1.1.2 add mkv embedded subs.
SuperTheMando said:
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Click to expand...
Click to collapse
Generally I get good results, but haven't tried it with movies yet.
Only 720p series with 25fps, no subtitles.
Back at my desktop tonight I will try a movie with subs.
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
SuperTheMando said:
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
Click to expand...
Click to collapse
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
MyrddinLXXIIX said:
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
Click to expand...
Click to collapse
Diceplayer give you hw acceleration without converting.
As promised...
Promised a follow-up with an mkv with subtitles.
I must admit I didn't get it to work yet.
Unclear to me if it is even possible, I found some info that the stock player will accept separate subtitles like .srt but I have not confirmed that yet.
Ran across another problem that put me off track.
Tried a conversion to mp4 with a movie but didn't think about the size restrictions.
Could not connect in Storage mode for some reason, so I tried to use SD-cards / usb-otg. No succes with 4 Gig+ files yet ~ using windows which has exFAT and NTFS, neither is working.
Possibly there is a filesystem that will do the job on Win7 and Android 2.3.3?
My research tells me that exFAT is not really available for Android, too tired atm to look for alternatives from the Win side.
Like USB-OTG very much, would like a way to get 4G+ files to my SII that way!
As I said, got sidetracked seriously ~ apologies if I got too far offtopic.

Video .mpg playback issue

Hello all,
I have copied an .mpg file (which has been created from miniDV camcorder 1440 X 1080 50i 25mbps) into microSD card.
i tried to play it with many video player with no luck.
I found one player (Rockplayer lite) which work BUT with problem.
At the horizontal pannings there is a deinterlacing issue, (horizontal lines) which is no normal. Except of this problem, the video plays smoothly.There is a setting called Software Decoding/ Hardware decoding.
If I select hardware decoding I take an waring message: The file cannot be played with system player , so the video does not even start!
Do you know if there is a video player which support Hardware decoding?
Thanks in advance
Horizontal lines in interlaced video are normal. Player has to have special deinterlacing algorithms to suppress that.
I have also tried moboplayer with no luck
friend1 said:
Do you know if there is a video player which support Hardware decoding?
Click to expand...
Click to collapse
There is no decoding-hardware for MPEG1/2 in Exynos (nor in any other recent SoC for mobile-phones), so hardware-decoding is not possible.
You need a software-decoder that does deinterlacing as well, but I´m not sure if the CPU is powerful enough to do this in HD-resolutions, but it could be possible, as MPEG2 isn´t that demanding.
But it definitely will need a lot of energy, so to save power it is probably best to convert the video in format with hardware-support, and do the deinterlacing on your computer as well. If you just plan to watch it on your phone, you could simply throw away one field. Each field still has a high of 540 pixels, which is way over the 480 pixels of the display, so you won´t see any quality-advantage having both fields available to display on your phone, it would just burn more battery.
thanks for the reply. I have hundreds of family videos in .mpg (converted from miniDV) which play smoothly with PC or any Media Player.
So, I don't think it worth converting all these videos for watching them to phone.
P.S. I think it's time to get a new camcorder using card for instant drag 'n drop playback.
LightspeedGalaxy said:
There is no decoding-hardware for MPEG1/2 in Exynos (nor in any other recent SoC for mobile-phones), so hardware-decoding is not possible.
Click to expand...
Click to collapse
Are you sure of that? You may try this: open a player (i.e. moboplayer) take a screenshot (home+power) of a video file i.e. mkv. You 'll see that the entire picture will be black (blank) because of hardware acceleration. If you select from the settings of moboplayer, software decoding and take again a screenshot , you 'll notice that the picture is OK (furthermore you'll also notice that there is a stuttering in video playback).
I believe that this is a proof that the phone can handle a hardware decoding.
friend1 said:
So, I don't think it worth converting all these videos for watching them to phone.
Click to expand...
Click to collapse
Sure, you won´t have all your videos on the phone anyway, so you can do a conversation if you need it.
P.S. I think it's time to get a new camcorder using card for instant drag 'n drop playback.
Click to expand...
Click to collapse
Well, I have to disappoint you again. New camcorders which use cards to store the videos usually use AVCHD. The media-framework currently doesn´t support the TS-container which is used (in different variants) for example on BD, for DVB-broadcasting and AVCHD as well.
There is currently no way on Android to use hardware-acceleration if the container is not supported.
So you will have to use software-decoding as well, which certainly can not be fast enough when using MPEG4-AVC in HD-resolutions.
So, there will be no instant drag-and-drop either, but at least we can hope for some firmware-update to include support for AVCHD, and of course you can always remux AVCHD-files in one of the supported containers, like mp4 or mkv, because the codecs are already supported.
friend1 said:
I believe that this is a proof that the phone can handle a hardware decoding.
Click to expand...
Click to collapse
Of course there is a DSP in the SoC to accelerate decoding of several media-formats.
But the video-processor decodes several types of MPEG4, it certainly can´t decode MPEG1/2.
Assuming that you want enjoy MPG files on Galaxy S II, S III, S IV, you'll need to get some help from 3rd-party video player app like mxplayer or 3rd-party video converter software like Brorsoft's Video Converter to convert MPG files to H.264 or MPEG-4 encoded MP4 videos for Samsung Galaxy.
Nice find on digging out this thread. And four years later, that was a quick response. :facepalm:
Sent from my GT-I9100

720p / 1080ü MKV playback?

i have the TF101, which unfortunately only plays 720p and 1080p files very choppy (someone told me you you re-encode them for the tf101 but meh).
do you guys think the prime will bw able t play such MKVs with no issue? im talking about normal 72ßp/108ßp mkvs which you can dl all ovwer the net, not specially encoded ones.
eos666 said:
i have the TF101, which unfortunately only plays 720p and 1080p files very choppy (someone told me you you re-encode them for the tf101 but meh).
do you guys think the prime will bw able t play such MKVs with no issue? im talking about normal 72ßp/108ßp mkvs which you can dl all ovwer the net, not specially encoded ones.
Click to expand...
Click to collapse
Anandtech says it's amazing at playing high quality video. this was an issue for me.
http://www.anandtech.com/show/5163/asus-eee-pad-transformer-prime-nvidia-tegra-3-review/5
crap, guess now i have to buy the prime
Plus in the what would you like to know about the prime thread a member already tested this as he has a prime already. It was mkv and 1080p. Played flawlessly. He made a video on it. He has at least 3 you tube vids reviewing the prime hands on.
Check out his videos in that thread n you will see.
Sent from my MB860 using XDA App
tegra3 has the ability to play high profile 1080p videos, the prime should do just fine with pretty much anything you can throw at it...
Tegra 3 may support 1080p and all, but question is, if default video player, that uses HW decoding, supports MKV format. My iPad 2 supports all kinds of HD, as long as it's in proper format. MKVs play very choppy if I use a player for any format other than iPad supported.
Meanee said:
Tegra 3 may support 1080p and all, but question is, if default video player, that uses HW decoding, supports MKV format. My iPad 2 supports all kinds of HD, as long as it's in proper format. MKVs play very choppy if I use a player for any format other than iPad supported.
Click to expand...
Click to collapse
Default player doesn't even matter. Even if a format not supported, there are always 3rd party players which will. The member here that has a prime used a 3rd. Party player to play that 1080P MKV file. Which it played perfectly. No default player in any tablet plays all formats. That's the great thing about getting a good 3rd. Prty player that will.
demandarin said:
Default player doesn't even matter. Even if a format not supported, there are always 3rd party players which will. The member here that has a prime used a 3rd. Party player to play that 1080P MKV file. Which it played perfectly. No default player in any tablet plays all formats. That's the great thing about getting a good 3rd. Prty player that will.
Click to expand...
Click to collapse
default player plays the video fine, but for some reason theres no sound.
bsplay, mxplayer and rock player are all HD accelerated players.
When someone goes to play with a demo at gamestop, they should take with them a micro sd that has a high profile 1080p mkv and see how that plays on the prime. They should add other video players on the card and install them and see which one plays better with the high profile mkv. Yes I know that reviews have said this or that, but having someone that is not part of any review circle would be grateful to many.
I would do this but I'm not popping my head in that gamestop store after getting that dump.
this guy plays a high profile mkv in his review...
http://www.youtube.com/watch?v=J8d4tPW_6Cw&feature=player_detailpage#t=323s
speed817 said:
this guy plays a high profile mkv in his review...
http://www.youtube.com/watch?v=J8d4tPW_6Cw&feature=player_detailpage#t=323s
Click to expand...
Click to collapse
That guy posted two above you. lol
oh hahaha. wasn't paying attention i guess =P
I wonder how Prime will play avi files. I find that playing avi on TF101 is fine but the quality is very bad - I get a lot of artifacts - like it had a grid of dots over it. Probably because players use simplified decoding algoritms? Or maybe it's because Tegra2 lacks NEON? I also think it should be able to send 1080p signal to the screen even if the video is below 1080p (and different than 720p) - otherwise it will be scaled twice - once to 720p by the Prime and second time by the monitor itself - it will probably degrade quality. (well, but on the other hand I can just stick to 720p and 1080p videos which should be great)
Tegra3 does have NEON so no worries.
andyxover said:
default player plays the video fine, but for some reason theres no sound.
bsplay, mxplayer and rock player are all HD accelerated players.
Click to expand...
Click to collapse
I had this same problem with a 1080p .MOV file off of my DSLR as well as a MKV file. I haven't tried mxplayer, but I will when I get home. I've been looking forward to being able to play MKV files without having to convert or manage with iTunes. Like Sinatra sang, "I'll do it my way!"
somehow I can't copy mkv to my asus prime... it keeps saying explorer error and it restarts the explorer
I have been playing around with my Prime for the last 5 days, especially in regards with video. Here are my findings:
- Not all files can be played back with HW decoding.
- mkv containers does not seem to be playable in the default player, only 3rd part, like mx video player.
- 720p mkv plays back almost flawlessly with some initial stutter in SW, 1080p does not.
- mp4 and avi seem to be HW accelerated by mx video player.
I am not entirely sure on what seem to be the problem. My initial reaction is that it is a problem with the container formats. However, I have not checked whether the videos, that I have tried to play, have some exotic encoding settings, which the software controling the HW decoder, does not recognize.
Perhaps mkw HW acceleration support broke in one of the updates I received, when I booted my prime for first time monday.
What are your experiences, especially with 1080p?
ph0ton said:
I have been playing around with my Prime for the last 5 days, especially in regards with video. Here are my findings:
- Not all files can be played back with HW decoding.
- mkv containers does not seem to be playable in the default player, only 3rd part, like mx video player.
- 720p mkv plays back almost flawlessly with some initial stutter in SW, 1080p does not.
- mp4 and avi seem to be HW accelerated by mx video player.
I am not entirely sure on what seem to be the problem. My initial reaction is that it is a problem with the container formats. However, I have not checked whether the videos, that I have tried to play, have some exotic encoding settings, which the software controling the HW decoder, does not recognize.
Perhaps mkw HW acceleration support broke in one of the updates I received, when I booted my prime for first time monday.
What are your experiences, especially with 1080p?
Click to expand...
Click to collapse
Try the same videos but with BSplayer ... let us know if that works ?
Danny-B- said:
Try the same videos but with BSplayer ... let us know if that works ?
Click to expand...
Click to collapse
The first three high profile 720p MKV files I tried with BSPlayer worked flawlessly. Same videos will not play at all on my Xoom.
Danny-B- said:
Try the same videos but with BSplayer ... let us know if that works ?
Click to expand...
Click to collapse
Will do when I get home. I will also try the same videos on my SGSII for comparison.
My hunch is that the hw decoder refuses to decode the video stream. Perhaps this is controlled entirely by the android system and not the video player app.

[Q] 720p video playback?

Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Maybe it's because your using a blueray video?
Use matroska format.
________________________________
~ Sent from iOS/Android device
iJimaniac said:
Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Click to expand...
Click to collapse
I have lags too! I've tried every player.
It seems hardware acceleration doesn't work on mkv files.
tapioco2000 said:
I have lags too! I've tried every player.
It seems hardware acceleration doesn't work on mkv files.
Click to expand...
Click to collapse
I actually am using an mp4 file but I think we have the same general problem.
If you are rooted, you can try editing /system/build.prop. Open it with text editor in root explorer and add "video.accelerate.hw=1" without quotes to it (make sure you back up the original file first!). That line is supposed to let the GPU render videos. Reboot your device, and see if video playback is any better. Also, there are many other build.prop tweaks that you can use found here:
http://www.freeyourandroid.com/guide/build-prop-modifications
and here:
http://forum.xda-developers.com/showthread.php?t=1227269
I use MX Player, easy to see whether GPU acceleration is working in that program. It has a lot of other nice features too, recommended in general.
The Wifi-5 plays the 720p trailer files I've tried without lag. Sometimes a few home-made files may seem to lag, but this is more likely to be due to incompatibility/ non-standard compression codecs than a lack of power. It doesn't seem to have problems with high-profile files or high bitrates in general. This is under Froyo, by the way.
onurdndar said:
I use MX Player, easy to see whether GPU acceleration is working in that program. It has a lot of other nice features too, recommended in general.
The Wifi-5 plays the 720p trailer files I've tried without lag. Sometimes a few home-made files may seem to lag, but this is more likely to be due to incompatibility/ non-standard compression codecs than a lack of power. It doesn't seem to have problems with high-profile files or high bitrates in general. This is under Froyo, by the way.
Click to expand...
Click to collapse
Let's try the famous mkv test file "Killa sampla" posted on XBMC forum.
MX fails! It says "hardware acceleration not supported"! And other players too!
tapioco2000 said:
Let's try the famous mkv test file "Killa sampla" posted on XBMC forum.
MX fails! It says "hardware acceleration not supported"! And other players too!
Click to expand...
Click to collapse
Which version of Killa Sample? Hopefully not the 1080p, that's obviously not supported. Even if it's a 720p version, it's way overkill.
klin1344 said:
If you are rooted, you can try editing /system/build.prop. Open it with text editor in root explorer and add "video.accelerate.hw=1" without quotes to it (make sure you back up the original file first!). That line is supposed to let the GPU render videos. Reboot your device, and see if video playback is any better. Also, there are many other build.prop tweaks that you can use found here:
http://www.freeyourandroid.com/guide/build-prop-modifications
and here:
http://forum.xda-developers.com/showthread.php?t=1227269
Click to expand...
Click to collapse
Thanks for the tip, I tried it, then used Mx video player with hw rendering, but it still lags. My next mission is converting to 480p, witch is the actual resolution of this screen.
Two possibilities are either:
1) Resolution is too high or
2) Device can handle the resolution but not the H.264 profile used for the video
Samsung Galaxy Player 5 won't play m4v files
I have several files loaded onto my Droid 3 that play fine. But, when I load them onto my Samsung Galaxy Player 5, I get the error message: "Cannot play video, sorry, this video cannot be played". What format do I need to use for the Samsung Galaxy Player 5 to get the videos to play? I have tried MP4, WMV, M4V, etc...
iJimaniac said:
Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Click to expand...
Click to collapse
my 4.0 plays 720p and 1080p without lags, the formats I use are wmv avi and mp4. Maybe its audio coding my player can't play AC3
Sent from my GT-I9000 using XDA
no AC3 audio is perfectly fine, its definitely the container. google Handbrake and DL it, its the greatest encoder I've ever used. Sure there is a slight learning curve but once you know how to use it your 720p videos will play flawlessly on your preferred video app (imo mx player is the best one out there)

Categories

Resources