Hey everyone,
First post, n00b question - please be gentle.
First, I'll start with a positive. I have come from using an iPhone, and I was quiet comfortable with jailbreaking and cydia. I now have a Samsung Galaxy S 2 / II (GT-I9100T). I am from Australia, and on the Telstra network. Whoever is in the same boat would know it is quiet an adjustment, but you can root! (if you wanted to know).
I followed this persons 3 part guide and with sucess:
I cannot post the link but it is on YouTube and the video title is:
How To Root The Samsung Galaxy S II - Part 1
How To Root The Samsung Galaxy S II - Part 2
How To Root The Samsung Galaxy S II - Part 3
Username is mattj101101
I had Android 2.3.3 installed.
Second part is a question, is there any debranding roms / kernals that is ok for the GT-I9100T? I have tried the *#272*IMEI# but it only had 'Preconfig - TEL'
My phones info:
PDA: 19100TDVKF4
PHONE: I9100TDVKF2
CSC: I9100TTELFK3
My Kernal version, after the root is 2.6.35.7-I9100XWKDD-CL161513root<insertATsymbol>DELL103 #2
Hopefully with these answers I can help other fellow people out with this particular model (that are sold in Australia). Also if someone has the stock Telstra rom for re-flashing (if needed for warrenty) please point me in the right direction.
Thank-you.
Hey,
Ive got the GT-I9100T from Vodafone (both can run on the telstra bandwidth now ) and have had no issues flashing most roms. Only thing you may notice is the new modems aren't as good as the stock ones you currently have, so you may need to reflash the original modem through odin to get the best support.
Before you do flash though, make sure you back up your /efs folder, it contains the bin files for your IMEI for your phone, and people have reported flashing a rom can change that, so beware! also, before you do flash, try find the stock telstra rom for your phone incase you need to reflash. There are a few threads about it all, so good luck
The i9100T can use i9100 roms, but it will change the product code to i9100.
Easiest way to root is using CF-root, match the part of the version number in bold "PDA: 19100TDVKF4"
My phones info:
PDA: The rom/kernel
PHONE: The modem/radio, responsable for signal quality and speed, you dont need to match this to rom version, and the best way to find a good one is to test different ones.
CSC: APN settings and bundles apps, no need to match this, but if you do chose to all you may have todo is enter your APN settings for internet and MMS manually.
You can flash any rom onto any SGS2 via odin, see this guide, that will debrand etc.
Also, you rooted using a very old insecure kernel, people have had random reboots with that one, I suggest you flash back your stock kernel (you will keep root) or flash a version of cf-root (you will gain clockworkmod recovery, a way to flash roms/etc from your phone, and nandroid, a whole phone backup system, like snapshots)
I would recommend flashing DarkyRom2 on your S2. Runs fast, stable and great battery life. It roots your phone as well and changes your kernel to SuperCore which has a lot of optimisations.
Instructions:
Since you're not rooted (stock firmware/kernel)
1. Flash SuperCore_1.7.tar with Odin (put in PDA and do NOT tick repartition)
2. Get DarkyROM2 Tool and Superuser from market
3. Upload DarkyROM2_XXKH3_Base_R2.zip to SD-Card (INTERNAL)
4. Open DarkyROM2 tool. Accept SuperUser access request notification (this confirms you are rooted.
4. Under the DarkyRom tab, be sure "Wipe User data" is selected AND "INSTALL MODEM" is NOT SELECTED. (this will wipe everything from your phone but keep your stock KF4 modem. Any other modem causes signal problems for our I-9100T. )
5. No need to select "Install Kernel" Since SuperCore 1.7 is already installed.
5. Go back to the General Tab and use "Flash/Install File from SDCARD" to browse to and install DarkyROM2_XXKH3_Base_R2.zip
6. Wait for the phone to reboot and flash the new firmware
Get the files here:
http://www.darkyrom.com/community/index.php?threads/rom-cwm-sgs2-darkyrom2-kh3-base.4950/
I modified the instructions given on that link and posted it above for you since it's a little different for our I-9100T phones.
more info on I-9100T here:
http://forum.xda-developers.com/showpost.php?p=16824749&postcount=10
Interestingly, I just purchased a SGS2 here in Thailand (I'm also an Aussie) and the model of the phone is GT-I9100T.
Unfortunately I cannot seem to find a KL2 kernel for CF-Root to patch it with... any suggestions?
Also, the site that held all the OEM kernels (MultiUpload) for download is now showing a "Shut down by the FBI" logo : )
As long as you're certain you've got a I9100T, use the KL1 CFRoot kernel. Will work fine.
ApriliaM3 said:
Interestingly, I just purchased a SGS2 here in Thailand (I'm also an Aussie) and the model of the phone is GT-I9100T.
Unfortunately I cannot seem to find a KL2 kernel for CF-Root to patch it with... any suggestions?
Also, the site that held all the OEM kernels (MultiUpload) for download is now showing a "Shut down by the FBI" logo : )
Click to expand...
Click to collapse
My phone details are as follows:
Model: GT-I9100T
Android: 2.3.6
Baseband: I9100TDCKL1
Kernel: 2.6.35.7-I9100TDCKL2-CL767350 [email protected]#2
Build: GINGERBREAD.DCKL2
This is not an Aussie phone such as the Telstra I9100T that I see spoken about.
I purchased this phone here in Thailand 3 days ago and I have a few questions.
1. Is there a way to backup the original kernel before rooting?
2. Will the KL1 kernal make me lose things such as Thai language options etc?
3. Any way to restore the KL2 kernel in the future?
Thanks for taking the time to reply!
MistahBungle said:
As long as you're certain you've got a I9100T, use the KL1 CFRoot kernel. Will work fine.
Click to expand...
Click to collapse
1) Doubt it. And the only link for DCKL2/Thailand in Intra's official firmware thread is dead as it was MegaUpload, and he more than likely won't have a backup (you could always ask him tho). Search around elsewhere online, you might find a copy of this kernel somewhere.
2) I don't know for certain, but I don't think so. I would have thought something like language would be more firmware-related.
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service from Samsung, all you'd need to do is flash the most recent firmware available for your phone (for all they know you could easily have got this from an OTA update via Kies), do a factory reset/make sure there's no apps left on your phone that could tip off whomever repairs it that the phone was rooted, and use a jig to reset the flash counter. Obviously there are no rolled gold guarantees with getting warranty service once you've voided same by rooting the phone/running non-stock firmware firmware on it, tho.
ApriliaM3 said:
My phone details are as follows:
Model: GT-I9100T
Android: 2.3.6
Baseband: I9100TDCKL1
Kernel: 2.6.35.7-I9100TDCKL2-CL767350 [email protected]#2
Build: GINGERBREAD.DCKL2
This is not an Aussie phone such as the Telstra I9100T that I see spoken about.
I purchased this phone here in Thailand 3 days ago and I have a few questions.
1. Is there a way to backup the original kernel before rooting?
2. Will the KL1 kernal make me lose things such as Thai language options etc?
3. Any way to restore the KL2 kernel in the future?
Thanks for taking the time to reply!
Click to expand...
Click to collapse
I was just worried it might stop future updates to ICS or similar via Kies.
At least I think I've managed to find another copy of the latest kernal on a site other than MegaUpload...
It's at 50% and counting : )
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service
Running a CFRoot kernel over stock firmware should still allow you to receive OTA updates via Kies. If you find it doesn't, simply use Checkfus (search for it on here), it allows you to find/download the latest firmware for your phone/country that you'd normally get via Kies.
Really ? Cool Might wanna post a linky to your source over in Intra's thread. I'm sure there will be other people who might need it at some stage.
ApriliaM3 said:
I was just worried it might stop future updates to ICS or similar via Kies.
At least I think I've managed to find another copy of the latest kernal on a site other than MegaUpload...
It's at 50% and counting : )
3) Refer to 1) I don't see why you'd need to ? In order to get warranty service
Click to expand...
Click to collapse
Ok so would you believe...
I ran the guide from Intra.
Installed an insecure ROM and then ran SuperOneClick and was rooted.
I restored the OEM kernel that I found online and BINGO - UNROOTED!
I repeated the procedure just to check everything again... same deal!
Phone is currently unrooted again...
MistahBungle said:
Running a CFRoot kernel over stock firmware should still allow you to receive OTA updates via Kies. If you find it doesn't, simply use Checkfus (search for it on here), it allows you to find/download the latest firmware for your phone/country that you'd normally get via Kies.
Really ? Cool Might wanna post a linky to your source over in Intra's thread. I'm sure there will be other people who might need it at some stage.
Click to expand...
Click to collapse
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
There's a procedure for removing the yellow warning triangle at boot in the CFRoot thread & also retaining root, but I found it too fiddly when I first rooted my phone so I simply bought a jig & did it that way.
I can't speak for anything to do with SuperOneClick as I've never used it.
ApriliaM3 said:
Ok so would you believe...
I ran the guide from Intra.
Installed an insecure ROM and then ran SuperOneClick and was rooted.
I restored the OEM kernel that I found online and BINGO - UNROOTED!
I repeated the procedure just to check everything again... same deal!
Phone is currently unrooted again...
Click to expand...
Click to collapse
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
MistahBungle said:
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
QUOTE]
Click to expand...
Click to collapse
As I said, I have no idea whatsoever about anything to do with SuperOneClick. If you want a rooted phone minus the yellow warning triangle at boot without fiddling around, root it with a CFRoot kernel, buy a $3 jig from eBay, done.
So far as Kies not working, you could try uninstalling/reinstalling Kies, or simply use Checkfus as I've said previously. Me, I'd use Checkfus. Quick, easy & like the paragraph above, no fiddling around.
Edit to add - Yes, obviously Kies won't work if you're running an "insecure rom" as per your post above. I presume you mean a custom rom you found somewhere on here or elsewhere ? One of my earlier posts did say Kies should (not always) work if you're running a rooted kernel over a stock Samsung rom. If you're running a non-stock rom Kies won't work.
ApriliaM3 said:
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
Click to expand...
Click to collapse
ApriliaM3 said:
Apparently so... now I'm confused about what the guide was trying to achieve.
Also, Kies now tells me it's not compatible with my device... Perfect!
MistahBungle said:
Yeah, if you flash an original (unrooted) kernel over your rooted kernel you'll lose root.
QUOTE]
Click to expand...
Click to collapse
Ditch Kies there is a better alternative out there. MyphoneExplore, do a seach via google. You'll also need to get the app client software from the android market. I use it to synch my work Outlook Calendar to my phone. You can also back up your contacts, sms and call records.
Click to expand...
Click to collapse
Edit: I tried CF-Root KL3 (wanted KL2) and it seems fine so far.
I have root and everything else seems the same (Thai language support etc.)
I'll keep you posted : )
Thanks for taking the time to deal with my issues!
Hope I can do the same for some others on this Forum in the future.
I'd not heard of Checkfus so I'll give that a try, thanks : )
There's no CF-Root to match my phone exactly but I guess there's nothing to lose now by trying something close : P
I ordered the jig almost a week before getting the phone but it seems the postage to Thailand is sloooow.
I'm running a stock ROM and unrooted but Kies is still misbehaving.
MistahBungle said:
As I said, I have no idea whatsoever about anything to do with SuperOneClick. If you want a rooted phone minus the yellow warning triangle at boot without fiddling around, root it with a CFRoot kernel, buy a $3 jig from eBay, done.
So far as Kies not working, you could try uninstalling/reinstalling Kies, or simply use Checkfus as I've said previously. Me, I'd use Checkfus. Quick, easy & like the paragraph above, no fiddling around.
Edit to add - Yes, obviously Kies won't work if you're running an "insecure rom" as per your post above. I presume you mean a custom rom you found somewhere on here or elsewhere ? One of my earlier posts did say Kies should (not always) work if you're running a rooted kernel over a stock Samsung rom. If you're running a non-stock rom Kies won't work.
Click to expand...
Click to collapse
Something may have borked so far as the CSC goes (which tells Kies, the Market, etc where you are). I did say you should be able to use Kies, you're not the first person to have problems with it after rooting
Personally speaking, I've never used Kies & almost certainly won't use it. Ever. Custom roms/kernels are a piece of you know what to flash via CWRecovery (or Odin for that matter), and official firmware updates are easy to get with Checkfus & flash via Odin if I ever have to go down that path for warranty purposes or whatever.
Kies is a truly awful piece of software
Edit to add after your edit - No worries
ApriliaM3 said:
I'd not heard of Checkfus so I'll give that a try, thanks : )
I'm running a stock ROM and unrooted but Kies is still misbehaving.
Click to expand...
Click to collapse
Yeah Kies is dodgy...
When I got home I plugged it into Kies on the home PC and everything was fine!
Have you experimented much with any Custom ROM's?
MistahBungle said:
Something may have borked so far as the CSC goes (which tells Kies, the Market, etc where you are). I did say you should be able to use Kies, you're not the first person to have problems with it after rooting
Kies is a truly awful piece of software
Click to expand...
Click to collapse
Related
Button Combos:
Download Mode: Volume Down+Home+Power
Recovery Mode: Volume Up+Home+Power
Once in recovery use volume keys to navigate, home button to select and power button to go back
Official Firmware Version
PDA: I9100MUGKG2
Phone: I9100MUGKG2
CSC: I9100MBMCKG2
Product Code: GT-I9100LKMBMC
Unlock
Galaxy_S Unlock App by Helroz found here https://market.android.com/details?id=com.helroz.galaxysunlock&feature=search_result.
Rooting
CF-Root Thread: http://forum.xda-developers.com/showthread.php?t=1103399
We do not have a CF-Root version of our kernel so just flash any kernel using the instructions provided in the link and flash the stock kernel back (found below). Root will remain as well as the CWM app but you will loose clockwork mod recovery.
Alternative method:
Zergrush exploit: http://forum.xda-developers.com/showthread.php?t=803682&highlight=zegrush
Yellow Triangle Removal
Tutorial can be found here: http://forum.xda-developers.com/showthread.php?t=1193091
Alternatively you can use a Jig as it also resets the custom Rom counter
I9100 Secret Codes
http://forum.xda-developers.com/showthread.php?t=1193285
All links below are for Gingerbread 2.3.3 MUGK2
Stock Bell/Virgin Modem
Directions: Use Odin and place .tar file in "phone" section
Download
Mirror: Download
Stock Firmware
Download
Mirror: Download
Stock Kernel
Directions: Place .tar file in PDA section using ODIN
Download
Mirror: Download
Bell CSC
Directions: Flash with Odin in CSC section
Download
Mirror: Download
Additional Modems:
Some users are experiencing better Gps/Reception with the KH3/KI3 modem
Directions: Unzip file and flash modem.bin with Odin under "phone" section
I9100XXKH3-Download
I9100XXKG6-Download
I9100XXKI1-Download
I9100XXKI3-Download
I9100XXKI4-Download
*CWM Compatible Modems can be found here
Flashing Instructions
How to install the latest firmware on your phone. This will also get rid of Bell's bloatware:
1) Make sure you have working drivers installed on your computer. If you do not, the easiest way is to download Kies and it will install it for you.
2) Install Odin 1.85 on your computer (attached at the bottom of this post)
3) Pick any firmware version you would like to flash from Intratech's thread linked here. The firmware is arranged from oldest to newest so the last ones are obviously going to be the newest.
4) Start Odin in "administrator" mode and make sure Kies is not running in the background. Use task manager to check
5) Place your downloaded firmware .tar or .md5 file into the PDA section in Odin. Make sure re-partition is not selected. Auto reboot and reset time should be selected by default.
6) Remove any external sd cards and the sim card from your phone (precaution) then reboot into download or hold volume down + home + power key. If a warning pops up press the volume up key to continue.
7) Connect your phone to the computer with the USB cable. You should see the I.D:Com port turn yellow.
8) Once you are certain everything is where it should be, select START. Once the process has completed your phone will re-boot. Exit out of Odin. That's it!
Optional (Rooting)
9) If you wish to root your will need to download a cf-root kernel that matches the firmware you just flashed from here. For example if you flashed XXKI4 then you will need to download the cf-root kernel that ends with XXKI4
10) Restart Odin and place the kernel .tar file in the PDA section, connect your phone and press START.
Alternative TWlaunchers
Since upgrading to 2.3.4/2.3.5 firmwares, some (including myself) have noticed some lag/stuttering when flipping through homescreens. I find that this gets worse when using the program monitor widget. I put together some alternatives that I pulled from the US variants of the Galaxy S2.
I have tested them and they have pretty much eliminated the issue. I personally find them much smoother. These are stock Twlaunchers with no mods. The files can be found at the bottom of this post. Requires Root.
Directions: These files a deodexed but will work with Odexed Firmwares (I tested on 2.3.5) Make sure to download another launcher and use it as your primary. While using an alternative launcher, back up the twlauncher.apk and .odex files under system app then the libglcanvas.so under system/lib. Then delete twlauncher.odex. Boot into CWM recovery and flash the new twlauncher. If you do not have CWM recovery you can also unzip the file and drop the .apk into system/app and the .so into system/lib.
AT&T
App version: 2.3.4
Features: Long press on menu button brings up search. Endless scrolling through home screens. Option to set app drawer alphabetically.
Epic 4G Touch (Sprint)
App version: 2.3.4
Features: Option to set app drawer alphabetically.
T-Mobile Galaxy S2 (Hercules)
App version: 2.3.5
Features: Long press on menu button brings up search. Endless scrolling through homescreens and widget selection screen. Option to set app drawer alphabetically.
credits: Intratech, x-cimo
Is there a way to turn off the sound (music) when the SGS2 starts?
mpsrent said:
Is there a way to turn off the sound (music) when the SGS2 starts?
Click to expand...
Click to collapse
There is no sound when the phone is in vibration/slient mode.
How to root sgs2 from BELL (GT-9100M)?
details steps plz for a beginner
turki_00 said:
How to root sgs2 from BELL (GT-9100M)?
details steps plz for a beginner
Click to expand...
Click to collapse
-Download and install ODIN on your PC.
-From XDA, download the kernel CF-Root-SGS2_ZS_OZS_KG2-v4.1-CWM4.zip(ZIP.File)
-unzip the above file and it will unzip itself to CF-Root-SGS2_ZS_OZS_KG2-v4.1-CWM4.tar (TAR File)
-Fire up ODIN and under 'PDA' browse to the above mentioned .tar file.
-Place your phone on download mode (either USB jig, or boot it up while holding vol down+home+power)
-once in download mode, plug in to the computer.
-everything should be default settings in ODIN,butmake sure repartition and flashlock IS NOT ticked.
-click start
http://forum.xda-developers.com/showthread.php?t=1075278
DONE
BTW, Im not sure if this is just for Rogers users but I tried disabling 'fast dormancy' and it actually slowed down my upload link connection. Not sure about Telus, or Bell users but it would be worth a shot to test as it helps drastically with battery life.
SMS Time Stamp Fix
I'm sure most already knows this but just I just wanted to post this here.
For anyone on the Rogers network (or any network that is affected) that is experiencing their text messages coming in 4 hours behind, download this free app in the market called time stamp fix and set the offset hours to 4. Link: https://market.android.com/details?id=com.mattprecious.smsfix&feature=search_result
KayvinM said:
http://forum.xda-developers.com/showthread.php?t=1103399
Currently the best 3 choices that is closest to our firmware version are:
CF-Root-SGS2_ZS_OZS_KG2-v4.1-CWM4.zip
CF-Root-SGS2_JP_XSG_KG2-v4.1-CWM4.zip
CF-Root-SGS2_XX_OXA_KG2-v4.1-CWM4.zip
Note: You will not be able to revert back to the stock kernel until Samsung releases our Firmware
Click to expand...
Click to collapse
CF-Root-SGS2_XX_OXA_KG2-v4.1-CWM4.zip is not even close to our version of android. It is a 2.3.4 kernel. Just because it says KG2, doesn't mean it's the same. That only refers to a single geographical area's release for a month. I'll explain:
The rom letter versions are actually based upon 5 letters, not 3. There are several variants of KG2. Basically, the Samsung naming convention is as follows:
Model name: I9100M
Provider/Area: UG (Bell/Virgin/Sasktel)
Rom Version: KG2
Now, the rom version can get broken down into each letter as well...
K = 2011
G = July
2 = 2nd version that month.
All area's roms are developed completely separate from each other...
Ours is UGKG2. Which is unavailable for download from the Samsung servers, so we're not able to actually get back to stock, or make any kind of custom firmwares/kernels based upon it.
All the other ones, including ZS, JP, and XX are completely different roms and kernels than what we have on our Bell phones.
The KG2 that either of those 3 kernels are based on are either 2.3.4 roms or different 2.3.3 roms. So, matching that is no different than installing a KG1 or KG3 or any KF* CF-Root kernels. ChainFire has not made a CF-Root based upon UGKG2 yet, so no matter what one you install, it's not based upon our rom, meaning you can basically install ANY CF-Root Kernel and as long as your phone still works with it, it doesn't matter. All the roms are completely different and the naming convention has nothing to do with each other unless all 5 letters/numbers match up.
Lesson of the night???? Just because a pile of uninformed people on a forum agree about something, it doesn't make it correct...
KayvinM said:
I'm sure most already knows this but just I just wanted to post this here.
For anyone on the Rogers network (or any network that is affected) that is experiencing their text messages coming in 4 hours behind, download this free app in the market called time stamp fix and set the offset hours to 4. Link: https://market.android.com/details?id=com.mattprecious.smsfix&feature=search_result
Click to expand...
Click to collapse
I have also found that upgrading KG3+ will solve the issue.
Electroz said:
CF-Root-SGS2_XX_OXA_KG2-v4.1-CWM4.zip is not even close to our version of android. It is a 2.3.4 kernel. Just because it says KG2, doesn't mean it's the same. That only refers to a single geographical area's release for a month. I'll explain:
The rom letter versions are actually based upon 5 letters, not 3. There are several variants of KG2. Basically, the Samsung naming convention is as follows:
Model name: I9100M
Provider/Area: UG (Bell/Virgin/Sasktel)
Rom Version: KG2
Now, the rom version can get broken down into each letter as well...
K = 2011
G = July
2 = 2nd version that month.
All area's roms are developed completely separate from each other...
Ours is UGKG2. Which is unavailable for download from the Samsung servers, so we're not able to actually get back to stock, or make any kind of custom firmwares/kernels based upon it.
All the other ones, including ZS, JP, and XX are completely different roms and kernels than what we have on our Bell phones.
The KG2 that either of those 3 kernels are based on are either 2.3.4 roms or different 2.3.3 roms. So, matching that is no different than installing a KG1 or KG3 or any KF* CF-Root kernels. ChainFire has not made a CF-Root based upon UGKG2 yet, so no matter what one you install, it's not based upon our rom, meaning you can basically install ANY CF-Root Kernel and as long as your phone still works with it, it doesn't matter. All the roms are completely different and the naming convention has nothing to do with each other unless all 5 letters/numbers match up.
Lesson of the night???? Just because a pile of uninformed people on a forum agree about something, it doesn't make it correct...
Click to expand...
Click to collapse
Lesson learned and post edited. Thank you for bringing it to my attention.
I have a friend with a Bell branded GS2 which he unlocked by buying a code to use on the Telus network. He wants me to upgrade it to 2.3.4 for him this weekend, but doesn't want it rooted.
I have an international unbranded GS2 and have flashed numerous firmwares. I have kept mine unrooted and have only flashed official leaked firmware via Odin (no custom ROM's). Can I update his the same way without rooting? I realize his model number will change (GT-I9100m to GT-I9100) and that he won't be able to go back until the Bell ROM is posted. I'm just not sure if there is any difference because his phone is branded and mine isn't.
No difference at all. Go ahead and install 2.3.4. Our phones are exactly the same as the international version. It's an I9100M due to Bell's firmware.
Sent from my GT-I9100M using XDA App
I am a TELUS customer with a Bell SGS2, and everyone I call or who calls me experiences an echo on their end. I did some research and found that it was actually my phone that was the problem. People said they were able to rectify the problem by disabling "Noise Cancellation", however, the only way I've been able to find to disable it is within the call itself, which means I have to disable it in every call.
Does anyone know how to disable Noise Cancellation permanently? Thank you!
Hi KayvinM and Electroz, I'm from Canada and I ordered my S2 from Newegg.ca, so my phone came factory unlocked and right now I'm running it on the Telus Network.
My phone is running on the UK firmware but I would like to use a North American firmware.
My questions is that would I be able to run any firmware from any region I want without damaging my phone?
And witch firmware is the latest one for the Canadian region?
Here's the details for my SCS2:
PDA: I9100XWKF3
Phone: I9100XXKE7
CSC: I9100XEUKD1
I posted a thread about this yesterday but I didn't get much help, so I really appreciated if you guys can help me.
Thanks in advance.
Sobai said:
I am a TELUS customer with a Bell SGS2, and everyone I call or who calls me experiences an echo on their end. I did some research and found that it was actually my phone that was the problem. People said they were able to rectify the problem by disabling "Noise Cancellation", however, the only way I've been able to find to disable it is within the call itself, which means I have to disable it in every call.
Does anyone know how to disable Noise Cancellation permanently? Thank you!
Click to expand...
Click to collapse
Weird thing is I had this exact issue a couple of days ago. What kernel do you have installed at the moment?
id_mew said:
Hi KayvinM and Electroz, I'm from Canada and I ordered my S2 from Newegg.ca, so my phone came factory unlocked and right now I'm running it on the Telus Network.
My phone is running on the UK firmware but I would like to use a North American firmware.
My questions is that would I be able to run any firmware from any region I want without damaging my phone?
And witch firmware is the latest one for the Canadian region?
Here's the details for my SCS2:
PDA: I9100XWKF3
Phone: I9100XXKE7
CSC: I9100XEUKD1
I posted a thread about this yesterday but I didn't get much help, so I really appreciated if you guys can help me.
Thanks in advance.
Click to expand...
Click to collapse
Hey id_mew, you can run any firmware you would like without damaging your phone. Just make sure you read up lots and you are comfortable with the process and using Odin. Also avoid using any .pit files when flashing unless it's called for. All the firmwares can be found in this thread http://forum.xda-developers.com/showthread.php?t=1075278 As off right now the latest canadian firmware is bell's/virgin UGK2 which is 2.3.3 based. Problem is if you are not currently on this firmware, you wont be able to flash it because it hasn't been released yet. As to my knowledge the latest official firmware is XXKG5 (poland based) and KG7 (Brazil) which was released earlier this month. Here is one the threads I found regarding ithttp://forum.xda-developers.com/showthread.php?t=1200044 As far as I understand there is no difference between the European and the Canadian version of the sgs2. Both phones make use of the same cell tower frequencies, meaning you should have no issues running a european based firmware here in canada. It just comes down to personal preference. Hope I was able to help
KayvinM said:
Weird thing is I had this exact issue a couple of days ago. What kernel do you have installed at the moment?
Click to expand...
Click to collapse
PDA: I9100XXKG5
PHONE: I9100XXKG5
CSC: I9100OXAKG5
Kernel: [email protected] #20
I only flashed the kernel yesterday which made my battery life so much better (20 hours of use with data/wifi/gps turned off most of the time) but still had echo problems before flashing the Kernel. I know its the noice reduction feature because when I disable the feature the person I'm speaking to no longer hears the echo. I just wish I knew how to disable it for good, rather than every time I answer a call.
As many of us is waiting for UGKG2 the stock bell rom, will it be available eventually? Quite a few people I know need that rom to revert so the phone can be send back for repair if need be.
Sent from my GT-I9100M using XDA Premium App
shuweee said:
As many of us is waiting for UGKG2 the stock bell rom, will it be available eventually? Quite a few people I know need that rom to revert so the phone can be send back for repair if need be.
Sent from my GT-I9100M using XDA Premium App
Click to expand...
Click to collapse
It's whenever Samsung plans to make it available. They might someday, or they may never. Other cellular firmwares are readily available, so I don't see why the Bell firmware won't. My guess is that the firmware will probably be released when Bell releases a new firmware with 2.3.4.
So where is this site or server that I can go check for firmwares
Sent from my GT-I9100M using XDA Premium App
Hi,
I've had a look around and can't find a thread that answers my question completely. I just want to gain root access to phone, I have no intention of flashing a custom firmware. My phone is a Galaxy S2 I9100 running Vodafone Australia's stock 4.0.3 ICS.
As I am new to rooting, I have browsed through this page but still have questions:
http://forum.xda-developers.com/showthread.php?t=1103399
I want to be able to easily restore my phone to its stock, unrooted state for warranty purposes. I'm not quite sure how to do this, Is there a way to backup my phones kernel as it is now, and be able to flash back to the stock kernel if something were to go wrong?
Also, My kernel version is 3.0.15-I9100TDULP9-CL422302 ..... The key letters being LP9? So then which one of these 2 would I flash?
CF-Root-SGS2_XW_KPN_LP9-v5.4-CWM5.zip OR
CF-Root-SGS2_DX_SIN_LP9-v5.4-CWM5.zip
Or would either work?
(Yes still going, sorry!) I also saw something called a Binary Flash Counter which counts the amount of times a phone has been modified? Would I be affected by this by just gaining root access? And if so how do I prevent that? (My ultimate aim is to root, but still keep warranty)
Thanks in advance for any help, its really appreciated.
mkirpy22 said:
Hi,
I've had a look around and can't find a thread that answers my question completely. I just want to gain root access to phone, I have no intention of flashing a custom firmware. My phone is a Galaxy S2 I9100 running Vodafone Australia's stock 4.0.3 ICS.
As I am new to rooting, I have browsed through this page but still have questions:
http://forum.xda-developers.com/showthread.php?t=1103399
I want to be able to easily restore my phone to its stock, unrooted state for warranty purposes. I'm not quite sure how to do this, Is there a way to backup my phones kernel as it is now, and be able to flash back to the stock kernel if something were to go wrong?
Click to expand...
Click to collapse
To get back to stock look for your firmware in Intratech's thread. It also provides links for kernel only downloads.
Also, My kernel version is 3.0.15-I9100TDULP9-CL422302 ..... The key letters being LP9? So then which one of these 2 would I flash?
CF-Root-SGS2_XW_KPN_LP9-v5.4-CWM5.zip OR
CF-Root-SGS2_DX_SIN_LP9-v5.4-CWM5.zip
Or would either work?
Click to expand...
Click to collapse
From the thread you were referencing:
The XX and OXA identifiers are not that important. Usually a "KG1" kernel is a "KG1" kernel, and that is that. Sometimes (pretty rare) it happens there will be multiple different kernels with the same name in different firmwares, that are actually different. If this happens, they are usually only very minor changes and you should expect them to still be fully compatible. I include the "XX" and "OXA" identifiers so the very advanced users can deduce from which full firmware I have taken the kernel file.
Click to expand...
Click to collapse
(Yes still going, sorry!) I also saw something called a Binary Flash Counter which counts the amount of times a phone has been modified? Would I be affected by this by just gaining root access? And if so how do I prevent that? (My ultimate aim is to root, but still keep warranty)
Click to expand...
Click to collapse
Yes you will be affected (if rooting with CF-root method) and no, you can't prevent it. However you can reset things. The easiest way to do this is to use TriangleAway from the Play store.
Best thing to do if you want a backup that's as close to stock as possible is to root your phone & then do a Nandroid backup in CWM before doing anything else to the phone (flashing custom roms, other kernels, etc). That will give you a backup that is essentially stock other than the rooted kernel.
If you want to guarantee warranty service, don't mess with your phone (yes, I'm serious). Once you start messing with it, you should lose any expectation of warranty service should the worst happen (rooting your phone/running non stock firmware voids your warranty). Having said that, many people who have rooted their phones and/or run non-stock firmware have been able to get warranty service by going back to stock & resetting the flash counter either with a jig or Triangle Away before sending it in for service. However, this is never a guaranteed, rolled gold 100% certainty.
FXRB is right, before you root your phone, either download your current firmware from Intratech's thread, or use the PC version of Checkfus to download it. This will save you problems if you need to go back to stock in say, 12 mths, and you forget which firmware was originally on the phone.
Unrooting Sprint Samsung s2 ics 4.0.4 fh13
I rooted my phone but would like to unroot it back to previous or stock. Please help with any information to unroot. Thanks.
hispeed10 said:
I rooted my phone but would like to unroot it back to previous or stock. Please help with any information to unroot. Thanks.
Click to expand...
Click to collapse
1. Reset binary counter using Triangle away app.
2. Download Stock firmware for your country/region here: http://www.sammobile.com/firmware/
3. Flash the firmware via Odin.
Done
hispeed10 said:
I rooted my phone but would like to unroot it back to previous or stock. Please help with any information to unroot. Thanks.
Click to expand...
Click to collapse
In addition to what Jokesy said, you say you have a Sprint Samsung s2 ics 4.0.4 fh13. The Sprint variant is the Epic 4G Touch, and has a different forum located at http://forum.xda-developers.com/forumdisplay.php?f=1281.
This forum is for the I9100, which is a GSM phone, and doesn't even work on Sprint's CDMA network.
For your own sake and future sanity, please go to and stay in that forum, and avoid flashing anything from this forum for the I9100.
I rooted my phone pushing CWM.zip and SU-busybox in recovery mode.
First CWM.zip And then su-busybox in the Clockwork orange mod. Its rooted and no yellow triangle.
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
mysticgorilla said:
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
Click to expand...
Click to collapse
Well, most you could pick up be reading a bit, everything is already explained around here but since i was in your shoes very recently:
- there's always a risk. You need to be aware of that. That said, most cases that actually go wrong it's usually user's fault who failed to follow instructions closely. So read them. And read some more. And then read again just to make sure. And then i'd read again.
I used this very recent method from chainfire (salute and donate to the man if you like and can, he deserves it) to root my 4.0.4 international GT-I9300 S3:
http://forum.xda-developers.com/showthread.php?t=1957273
Triangled away next and everything worked like a charm. This preserves everything as stock as possible just adding root to your phone.
- from what i can tell, as long as you don't do anything that messes with the bootloader, you can always recover from a procedure gone wrong. Just disconnect, remove battery, insert and try again. Rebooting the computer or changing usb ports usually helps too (on odin).
- after rooting successfully, the very first thing you should do is backup your /efs folder. This is easy, just pick up root explorer or some other file manager that allows exploring you root (/), go up in your folders until you get to / look for the efs folder and just copy it (NOT MOVE) elsewhere (sd card, external sd, your computer preferably, whatever, just have that safe). This will come in handy in case you lose your imei at some point. Just restore this folder's contents and you're good to go. If that happens and you don't have a backup, it's a f'ing pain you can do well without.
- anything else root related is just common sense. Since you have the potential to screw up your entire phone with root permissions (this is why you don't have them in the first place), if an app pops up asking for root permissions, be sure what it is before allowing. If you're not sure, you can always deny first and allow later in the superuser app.
- you can also look into backing up with nandroid. You can think of this as an image of your entire phone. With this you can restore your phone to the same state it was when you did it. Useful when something went wrong and your phone doesn't boot anymore or you just wanted to try new roms with the option of coming back to what you had before. Not sure how you do it on the S3 still, but it usually requires a modified recovery like CWM. The method to root above doesn't install one though, it preserves what you had. Check this instead if you're interested:
http://forum.xda-developers.com/showthread.php?t=1695238
Cheers dude, i'm sure everything will go well for you too.
Chance of a brick about .0001 % rising to 100% for those that are to lazy to read follow instructions .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
mysticgorilla said:
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
Click to expand...
Click to collapse
1) You don't need to root to update to JB.
Just download any ROM you want from http://samsung-updates.com/device/?id=GT-I9300 (I recommend the UK unbranded ROM, BTU) then use Odin3 to flash it to your devices. Search the forums for specific instructions on this procedure. I'll just tell that it takes no more than 2-3 minutes.
2) If you're going to root, I suggest you do it beforehand, by flashing a kernel like Siyah (in ICS), and then proceed to flashing the stock JB ROM, HOWEVER, instead of using Odin3, you will use MobileOdion (available from Play Store), because that way you'll have a fully rooted and stock device.
3) Using step 2 above, it will not wipe not unroot your phone. It is safe and retains all your settings. That is the beauty of MobileOdin. There is a free version.
If you root and THEN install via Odin (PC), then you'll lose root, but not your settings.
In either case, you only wipe the device IF YOU WANT TO.
So, the best option is to:
a) Install SiyahKernel using Odin3 (PC)
b) Download the JB BTU ROM from http://samsung-updates.com/device/?id=GT-I9300
c) Extract the .md5 from the ZIP file and move it to the device's ext. sd card
d) Install MobileOdin in the device
e) Use MobileOdin to flash the .md5 you moved to it in step (c)
f) install TriangleAway (download from XDA) and run it to reset binary counter (which got incremented in step [a] )
Results: rooted, JB, stock, all settins retained, no binary counter increment
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
prawln said:
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
Click to expand...
Click to collapse
Thanks!
The 9300T and the 9300 are NOT the same device, therefore they use different firmware (ROM). The ROMs for the 9300T are here: http://samsung-updates.com/device/?id=GT-I9300T
I don't think there is a 9300T ROM for the UK, since the model released there is the 9300 (non-T).
It seems that either Samsung-updates hasn't indexed any ROMs for your model or they haven't been released.
About CSC: just don't worry about it... download and flash any ROM you want for your specific model and don't worry. If you don't like it, just download and flash another one.
Thanks heaps for that!
I actually just tried the UK unbranded rom that was for the i9300 on my i9300T and suprisingly everything seems to work ok so far (phone calls, txting, 3g etc)
Thankyou to everyone!
Thank you for your responses to my post regarding rooting my s3. They were very helpful. i succesfully rooted via chainfire cf auto root for the I9300 model without problem. Just one last question, I have been searching around a bit and some people are saying that flashing the jellybean firmware via odin, is not a perfect copy.. i mean some say they have been experiencing very minor problems here and there. So, if i update to the uk firmware on jelly bean via odin or mobile odin, and i experience some problems, can i still get the official ota update or jellybean 4.1 via kies when it is released? Thanks again for your help. Im pretty new to this android stuff
Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
sbi1 said:
Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
Click to expand...
Click to collapse
There is no version of the i9100 sold in the US. What you probably read about is someone who flashed firmware or a ROM for the i777 (or some other different variant model) to an i9100. The i777 is the variant sold by AT&T. The i9100 is sold internationally.
As long as you stick to flashing things meant for the i9100, you should be fine.
Also, make sure of the exact model. There is also the i9100G variant, which is incompatible to the i9100 in terms of firmwares, kernels, and ROMs.
Just be careful, and if you intend on flashing anything, only use things meant for that exact model phone.
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
sbi1 said:
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I don't believe you'll get any OTA updates on the i9100 while in the US. I haven't, in over a year. Besides, you can turn it off. (OTA)
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Click to expand...
Click to collapse
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Thank you both!
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
Click to expand...
Click to collapse
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
sbi1 said:
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
Click to expand...
Click to collapse
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Recoveryception bro
Not sure why I cannot find stock in sammobile.
ctomgee said:
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Click to expand...
Click to collapse
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
ctomgee said:
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Click to expand...
Click to collapse
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
sbi1 said:
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
Click to expand...
Click to collapse
Depends. A custom kernel like Siyah will do. I don't think OTA works on this phone in the States.
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
jaykresge said:
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
Click to expand...
Click to collapse
Well, at the end of the day I do want to root and maybe even install a custom rom (trying to convince my daughter that it's safe ). I did root and run Shostock on my I777, but I don't have any experience with the I9100.
I don't necessarily want the OTA update, I was just worried that if I try to update it (currently 4.0.3...not sure if there is a newer version at all), the OTA will put something that does not belong there. As I said, I read somewhere about Samsung US downloading US version that doesn't work with the I9100.
If you want to root and rom, this is the right place. If you or your daughter are more comfortable with a stock ROM, get Kies. It's not going to download the US firmware. Here's why.
-you plug it in and it detects the phone, literally saying, "Hey, I have an i9100 here, not an i-777!"
-It looks for your current firmware, literally saying, "Hmm, I see UK 4.0.3 here, let's see if there's more current UK firmware."
-It then finds the more current firmware for what is currently installed, "Egads! There's a 4.0.4 UK firmware!"
Anyway, there is in fact a more recent firmware for your device (4.0.4) and it contains numerous bug fixes. I'd recommend installing Kies and running that update. Then, if you haven't done much with the phone yet, factory reset it to clean out any left over garbage. It will give you a smooth experience. And for what it's worth, I've had no desire to root/rom my SGS2. On my Incredible, not only did I root/rom, but I had my own project (Liberation) that I ran on these very boards. With the SGS2, there's been no need for me to do that.
Some like the "pure google experince"
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
sbi1 said:
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
Click to expand...
Click to collapse
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
jaykresge said:
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
Click to expand...
Click to collapse
Thanks jaykresge. I am familiar with Odin. As I mentioned - my I777 is rooted. What I don't know though is how/where to get the correct UK firmware to replace the one I have and "UK'ing" the device
Hi All Below I occidentally posted in the Galxy SI900 instead of here< I got the usual replies but was grateful all the same. Maybe someone might help before I revert to stock...
Hi all, I know this has been done and dusted but I am having problems with connecting to kies after rooting. I am running standard jelly bean 4.1.2 and is an Australian GT-I9100. I installed the siyah kernal root system and now all I get on kies is "connecting" Windows 7 recognises and I can access the phone via explorer on the PC. The phone after a while comes up with a message that there is no compatible software on the PC, install kies...
I have tried all the so called fixes including formatting the internal SD and memory. The only thing I did before it stopped connecting was the root and running Triangle away (paid version). I have enabled / disabled USB debugging. The only things I haven't tried is a factory reset which I don't really want to do as I am always sceptical that the backup apps will work after to restore everything.
Any help appreciated
Click to expand...
Click to collapse
The thread is here: http://forum.xda-developers.com/showthread.php?p=45907982#post45907982
Hope someone can help...
Regards Ismael
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
jiseuo said:
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
Click to expand...
Click to collapse
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
IsmaelJones said:
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
Click to expand...
Click to collapse
Now I am not using KIES, because I use AOSP ROM (4.3 Slimbean), but in past, when i was using STOCK ROM (XWLSN, XWLSS) I used "PhilZ-cwm6 - Safe Stock Based Kernel" http://forum.xda-developers.com/showthread.php?t=1877270 to root my phone.
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
jiseuo said:
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
Click to expand...
Click to collapse
Okay had a look at this, thanks. I do have a question though, my Kernel (PDA) is XWLSH, I have downloaded the 2 files but I am wondering how to install? Do I use my CW recovery or do I have to revert back to stock? A little confusing as he dowsn't really give instructions and I am pretty much an amateur when it comes to some of these things? Also I am running JB 4.1.2 he only mentions ICS 4.0.4? Help appreciated here...
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
IsmaelJones said:
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
Click to expand...
Click to collapse
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
jiseuo said:
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
Click to expand...
Click to collapse
Hi Again, solved the problem... definitely the siyah root was the culprit. I used mobile Odin to install the stock kernel, once done checked and could connect in kies and was still rooted missing busybox only. After that I again used mobile odin to install philZ, again no problems and all seems fine now. Everything working.
Thanks a million for helping and also many thanks to mobile odin developers as this is a far better tool than most and saves connecting to the PC Odin. Also seems a lot safer...
:good: