Hi guys, i'm thinking i may have to send my G2 back to O2
I love the G2 but as an actual phone mine as become next to useless! 99% of my calls drop out mid call or freeze with the other persons voice freezing mid-sentence and stuttering like a stuck record. At this point the screen usually freezes so i can't do anything with the phone for up to a min (approx) .
I find even if i have full signal, as soon as i go to make a call the signal will drop out completley, showing the circle with a bar through it? I thought it may just be crappy O2 reception but my wife is on O2 and her phone is fine.
Has anyone experienced these problems or similar and can provide a bit of feedbak? Otherwise it's gonna have to go which is a shame cos it's brilliant for everything else
I've now restored my original O2 branded firmware as the phone may have to go back to O2, i've also used a USB jig to reset download counter.
When i type *#1234# it shows:
PDA: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100O2UKE1
Build info: Fri May 6 07:48:55 KST 2011
THis is what i was expecting however when i check in Settings > About Phone the Kernel version is: [email protected] #2
How come when i re-flashed the O2 branded firmware did the kernel not get replaced with a non-root kernel?
Any suggestions on how to get rid of the Root kernel would be most welcome
I'm in the process of downloading a full wipe rom so i'll maybe flash this and then re-flash the O2 firmware to see if that removes it?
[email protected] #2
root doesn't mean the phone is rooted.
DELL101 doesn't mean samsung got dell to make the phone either.
That is the original kernel.
HI
Are you sure its root? I dont remember what the stock kernel was for me but have you tried running a root app with success. set cpu is a good one to try you can find it free here on xda.
About your reception issue,
Its the modem/radio that sorts out your reception have you tried different ones? Im on o2 in the midlands i find KG6 modem to be the best for me.
What custom rom where you on? and do you get the same problems with the stock rom?
Actually flashing different modems would be a really good idea.
mynamesteve, pointed KG6, I would also recommend the KH3 modem as well.
Try it before you take it back.
As for rooted kernel, I recommend using speedmod, by hardcore.
LiFE1688 said:
[email protected] #2
root doesn't mean the phone is rooted.
DELL101 doesn't mean samsung got dell to make the phone either.
That is the original kernel.
Click to expand...
Click to collapse
Thanks brother
mynamesteve, LiFE1688
I tried running Titanium backup and it failed so as you correctly suspected it clearly isn't a root kernel.
Also i flashed original O2 firmware
PDA: I9100XWKDD
PHONE: I9100XXKDH
CSC: I9100O2UKD1
and the Kernel version was shown as [email protected] #2.. so there we go
Actually flashing different modems would be a really good idea.
Click to expand...
Click to collapse
Where is the best place to find individual modems? All the firmwares that i have flashed have been a single tar file or zip file containing the 3 components....
Thanks again guys ;p
Sigh, it is even a sticky thread.
Galaxy S 2 Shipped Modem Collection
You can also use rom manager to download it.
Thanks again, i've flashed KG6 firmware so will see how the reception is with it, if there's no change will try KH3 modem...
Nice one
Related
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Reheat said:
Hi All,
Sorry for the noob question, I recently got a SGS2, my first Android device. I'm currently on At&t in the US. I believe the phone is unlocked since it has the yellow triangle on boot up.
The phone currently has :
PDA: I9100XWKE7
Phone: I9100XXKE4
CSC: I9100XEUKD1
I would like to upgrade the phone to Andriod 2.3.4 and not wipe any data on the phone. Which PDA, Phone, and CSC firmware should I get?
Thanks for your time.
Click to expand...
Click to collapse
the yellow trianlge means that the phone is rooted! - in other words a custom software is installed in it.
what ROM?
answer---> what would you like? stock looking? - kitchen KH3, Cognition, vilian etc
custom?--->MIUI, CM7
themed?---->litening
and you can continue like this for long time...go to the original android development mate and check the procedure how to flash and how to use CWM i think u may have one installed if there is the yellow triangle...
then check ROM's and atached screenshots - read about thems bugs and problemss and pick one...dont be afraid u can change back or for another one anytime - but i will recomend you back up EFS folder first - there is a topic how to do so in original android thread.
i hope u will find your way
Thanks for the info Hunteres. I think I want to keep my phone stock, so I was wondering which firmware from Intratech's Official i9100 Firmwares thread I should get that would work on At&t. The phone is rooted and does have CWM installed when I bought it. When I upgrade to 2.3.4, do I need to upgrade the Phone: I9100XXKE4 and CSC: I9100XEUKD1 also?
Firmware
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Any rom can be used on any carrier.
If you are getting poor signal or data speed try a different modem, there is also a thread dedicated to getting the correct AT&T apn.
cc999 said:
Get the KG5 firmware. I have been using that for a few weeks on ATT USA and its perfect. Battery life is also excellent. I have an unlocked from Clove in the UK.
CC
Click to expand...
Click to collapse
is the KG5 more perfect than the KG3?
Sent from my GT-I9100 using xda premium
KG3 - HAS VIDEO for Google Voice - This is the only plus - some apps do not work.
KG5 - much better battery life - all apps work - very solid build, no crashes or freezes.
CC
Thanks for all the info. Would KH3 firmware be better than KG5 since it's newer? Do I need to upgrade my current baseband firmware and CSC firmware when I upgrade to a new kernel?
Hi guys,
Hopefully you can offer me some advice.
I've been running on stock and normal kies releases on my O2 Samsung Galaxy S2 and I rooted it using infratechs technique is in 'stock' threads. A few days ago an update came up on Kies for the 2.3.5, I've updated and everything apart from my reception is fine. Where before I had say 3 out of 5 bars, now I have none and in areas where I had full strength I only have 3.
My phone details are now:
Android Version: 2.3.5
Baseband Version: I9100XXKI4
Kernal Version: 2.35.7-I9100XWKJ1-CL647431 [email protected] #2
Gingerbread Version: GINGERBREAD.XWKJ1
I've not done anything else to the device since I updated it, not sure why it still says root on ther kernal, But none the less has anyone got any suggestions on what I can do to fix the problem? I don't want to start playing around with flashing until I've had some real guidance from people who know alot more then me!
Thanks in advance.
nickyboyc said:
Hi guys,
Hopefully you can offer me some advice.
I've been running on stock and normal kies releases on my O2 Samsung Galaxy S2 and I rooted it using infratechs technique is in 'stock' threads. A few days ago an update came up on Kies for the 2.3.5, I've updated and everything apart from my reception is fine. Where before I had say 3 out of 5 bars, now I have none and in areas where I had full strength I only have 3.
My phone details are now:
Android Version: 2.3.5
Baseband Version: I9100XXKI4
Kernal Version: 2.35.7-I9100XWKJ1-CL647431 [email protected] #2
Gingerbread Version: GINGERBREAD.XWKJ1
I've not done anything else to the device since I updated it, not sure why it still says root on ther kernal, But none the less has anyone got any suggestions on what I can do to fix the problem? I don't want to start playing around with flashing until I've had some real guidance from people who know alot more then me!
Thanks in advance.
Click to expand...
Click to collapse
You need to flash a different modem. That will probably take away your problem. Do you know which rom you had? Then you can flash that modem onto your device.
Lennyz1988 said:
You need to flash a different modem. That will probably take away your problem. Do you know which rom you had? Then you can flash that modem onto your device.
Click to expand...
Click to collapse
Hi Lenny, thanks for the quick response it is appreciated.
I don't I'm afraid, I'm guessing it would have been the stock one on the previous version?
Here is a topic about modems that can be flashed true your recovery.
http://forum.xda-developers.com/showthread.php?t=1277593
Just try some out and see what works for you the best You could start with the latest and then try the one before that one etc.
How do you know if it worked?
Lennyz1988 said:
Here is a topic about modems that can be flashed true your recovery.
http://forum.xda-developers.com/showthread.php?t=1277593
Just try some out and see what works for you the best You could start with the latest and then try the one before that one etc.
Click to expand...
Click to collapse
Lennyz1988 - thanks for the guidance. I am definitely a newbie at this. Yesterday my G2 updated it's firmware and the did 2.3.5. The reception dropped straightaway and not doesn't work in parts of the house it did easily before. Those calling me said it was terrible. God forbid, I am having to use an old iphone now!!!
I have rooted the phone, loaded Rom Manager, put it in recovery mode and then told it to install one of the zip files (kp1). It did started the install (orange bar across bottom) but had to press the home key a couple of times to keep it going (there was yellow lines of scripts or comments with several lines of red in the middle each time I pressed the home key but too fast to read).
Anyway, no difference so I suspect it didn't work. Any ideas - stats below ??
I would pay for help if someone could fix the thing.
Vodafone carrier
Baseband - I9100BUK1
Kernel - [email protected]#2
Build - GINGERBREAD.BUKJ3
Original O2 shipped modems first release was KDH
Any of the released modems work on O2 UK some may give individuals better reception .
If you use CWM root and Rom Manager = problems .
jje
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
ProNewb said:
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
Click to expand...
Click to collapse
Check your APNs to see if they changed or got wiped out?
ctomgee said:
Check your APNs to see if they changed or got wiped out?
Click to expand...
Click to collapse
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2. I live in Rep. of Ireland.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
ProNewb said:
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Click to expand...
Click to collapse
sxi200 said:
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Click to expand...
Click to collapse
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
ctomgee said:
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
Click to expand...
Click to collapse
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
ProNewb said:
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
Click to expand...
Click to collapse
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
sxi200 said:
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, i did go back and flash the jpkj2 2.3.5. and still no connection.
will try from an open place again later.
i have an issue with my internet connection too. i got an I9100(international version) and things were perfect till i switched to 4.0.3 and since then, my internet just refuses to connect although i have full signal strength and 3G or H displayed. but there is nothing going through.
it works again after i switch to airplane mode and back. i have no issues with wifi.
i have tried many modems and roms. i am currently using the KI4 rom and it still gives me issues.
please help.
update on situation
Hi guys,
just an update on my situation. Had the phone sent to Samsung twice for a check and bothe times it came back perfect with test sheets showing all was perfect. I decided to have another check done on the phone and it now says that the phone is blocked!! What the hell!. When i checked first weeks ago all was good and now it says it's blocked, but i'm getting 2g signal, surely i should be getting nothing if it's barred.
I have no idea who the origional service provider was of the phone, is there any way of finding out who the origional provider was or is there any way of removing this barring?
Thanks
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
I think you have the international sgs2. I have tried flashing the xxlpq ics update and then flashed a custom rom but I encountered a lot of issues. I think the ics update still has lots of bugs so I rolled back to gingerbread using checkrom revoHd v6. So as of the moment all you need to do is root your phone with Odin and CF-root kernel and wait for a stable ics rom
pedro.coba said:
permission to listen
Click to expand...
Click to collapse
I'm also waiting for othjer members' ideas so we can all listen and learn
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
Click to expand...
Click to collapse
Are you planning to upgrade to stock ICS firmware or any other custom ICS ROM???
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there? Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
I am even willing to pay for Mobile Odin Pro and flash it directly from the phone, I read that it's safe and you don't lose any data, although other people were saying that it's better to just start from scratch.
Right now my phone info is the following:
PRODUCT CODE: GT-I9100LKMBMC
pda: I9100XWKK5
PHONE: I9100XXKI3
CSC: I9100XEUKH2
Model: GT-I9100 (shouldn't it have a M at the end?)
Android version: 2.3.6
Baseband version: I9100xxki3
Kernel: 2.6.35.7-I9100xwkk5-CL754841
[email protected] #2
Build number GINGERBREAD.XWKK5
So, could anyone point me to the right direction?
Thanks in advance
Click to expand...
Click to collapse
You have a whole lot of options to play with, it all depends how comfortable you feel and what do you want.
For starters, you have upgraded from KG2 to KK5, which is a firmware other then Bell, as Bell never released and update. Because of this upgrade your phone says it’s a I9100 and not I9100M. Mine says the same after I upgraded as well.
I updated my Bell KG2 to ICS (LP7) and so far I don’t have any problems with it. I did have an issue with calls going straight to voicemail, so I installed the LPQ modem, and things have been well. People have complained about battery life, but I don't think it’s bad. I would say pretty close to stock GB if not better.
What you can do is make a Nandroid backup and then upgrade to ICS. You can do it through Odin Mobile if you like, as it won't upgrade your Custom Rom Counter, if that is an item of concern to you. There are other ways to clear the custom rom counter, if you go through ODIN.
I would suggest doing a factory reset with CWM, and clear cache/dalvik cahce. This will be like setting up a new phone. You can also upgrade without the reset that and it will keep all your settings and unlock. You will lose root though, but you can re-root.
I have done it both ways, and I went with the reset in my 2nd try just for my peace of mind. I didn’t have any problems without the reset either.
If you don’t like it, you can always go back to your Nandroid backup, which is what you currently have using CWM.
If you want original bell firmware, then you have to wait until bell releases it.
In the end you are the one to decide. Hope this helps.
Once u unlocked network it won't relock after u flash/update software
Sent from my GT-I9100 using Tapatalk 2 Beta-2
Hi everyody, thanks for the answers...
I guess I want to try the stock first and then move on to some custom roms...
I read a thread about the XEO Rom and was going to try that
What do you think about this?
@sahib - thanks, I was not aware of that...
@warhawk_la - thanks a lot, very helpful bits and pieces; what is the difference between the LP7 rom and the XEO and where did you get the files from (I see tht you flashed a different modem)
gixie said:
Hello everybody,
I have a SGS2 from Bell Canada. I upgraded the stock firmware following various guides here. I managed to root it and to unlock it using Galaxy S unlock from the market.
The phone is running well now, battery life is about 2-3 days (I have Juice Defender and it helps).
I would like to upgrade to ICS but after reading a few threads I am very confused...
My first question is: will I lose my unlock?
NO its un locked .
Then, Kies does not recognize my phone any more; should I flash back to stock and wait for ICS to be available for my carrier and take it from there?
May not work as Kies needs correct codes .
Or should I go through Odin and just flash one of the ROMs released for Europe (or another region).
Your choice but rom for your region and actual phone is always best even as a backup for warranty .
Personally i would not jump on the ICS bandwagon yet .
jje
Click to expand...
Click to collapse
download odin 1.85, official XXLPQ rom, siyah kernel.
flash the lpq rom first
flash the siyah kernel second
now you have last ics and root.
Hi,
"Another newbie reporting to this forum" ~~~~~~I just changed from Iphone 3GS to Samsung S3, so I'm new to this whole "new" world. I got my S3 from Kogan (HK) and the phone is international version.
I did some search and found out my phone is the European Version as per this link:
http://forum.xda-developers.com/archive/index.php/t-1725348.html
My questions are:
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
2. What are the difference between the different regions of the stock ROMs?
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
My phone's detail:
AP: I9300BUALF1
CP: I9300BULF1
CSC: I9300VFGALF1
BUILD NUMBER: IMM76D.I9300BUALF1
KERNEL VERSION:
3.0.15-671831-user
[email protected]#1
SMP PREEMPT Tue Jun 5 10:17:57 KST
2012
BASEBAND VERSION: I9300BULF1
Thank you for your help!
superfilm968 said:
Hi,
"
http://forum.xda-developers.com/archive/index.php/t-1725348.html
My questions are:
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
You can flash any International rom to an I9300 .
2. What are the difference between the different regions of the stock ROMs?
Difference possible modem and CSC relative to location .
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
Better Battery Stats app and thread + ten thousand save your battery posts ,
jje
Click to expand...
Click to collapse
1. Can I flash the firmware to Australian/China Stock ROMs, instead of (correct version from samfirmware.com) - - File: GT-I9300 I9300BUALF1 Android 4.0.4 2012 June I9300VFGALF1 United Kingdom (Vodafone)?
You can flash any International rom to an I9300 .
2. What are the difference between the different regions of the stock ROMs?
Difference possible modem and CSC relative to location .
2. Currently my phone's battery drains so quickly, is there any way to have this fix???? Have already selected advanced Wifi setting - - -Keep wifi on during sleep (Never), but still run out very quickly.
Better Battery Stats app and thread + ten thousand save your battery posts ,
jje
Click to expand...
Click to collapse
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone?
superfilm968 said:
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
After flashing
Warranty = run triangle away then flash stock rom .
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
Modem generally work every place but some are better in some locations and you need to try if having network problems .
CSC just local area network setup details instead of manual entry .
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
Know nothing about a SGS3 battery issue the fix power profile is not battery its just stats wrongly shown means nothing at all .
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone
Best Guide .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
JJEgan said:
superfilm968 said:
Thanks for the reply JJE! can you please clarify the following for me?
1. I've already rooted my stock rom and applied the battery fix, if I need to install the Australian Vodafone stock for example, do I need to use TriangleAway to reset Flash Counter first than re flash the new rom?
After flashing
Warranty = run triangle away then flash stock rom .
2. You mentioned the modem and CSC difference, what are they in relation to the phone and any affects to the phone by flashing the different Region's Stock ROM?
Modem generally work every place but some are better in some locations and you need to try if having network problems .
CSC just local area network setup details instead of manual entry .
3. My friend is using the Australian version of S3 and doesn't have any problem with his phone. I did some search on the net and found out the battery problem affecting lots of international version of S3 phones. Although after I applied the battery fix via this link - - - http://forum.xda-developers.com/showthread.php?t=1732722 , I'm still having the problem with the battery, therefore is possible for me to flash the Australian Stock ROM and hopefully the different region's ROM will fix this issue.
Know nothing about a SGS3 battery issue the fix power profile is not battery its just stats wrongly shown means nothing at all .
4. Is there any links that I can follow easy enough for newbie like me to flash the ROM without brick the phone
Best Guide .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Thanks JJE!!!!
After installed the battery profile, my phone's battery status is back to normal. I tested since this morning with 100% and I still have 60% left, although most of the time left in idle mode, where as when I first got my phone, the battery drop to 80% after 20 minutes after unplug from the power.
I found the file - CF-Root-SGS3-v6.4.zip from this forum, after the installation, how can I tell my phone is rooted or not?
PS: Sorry I'm asking so many questions!
Click to expand...
Click to collapse
superfilm968 said:
JJEgan said:
Thanks JJE!!!!
After installed the battery profile, my phone's battery status is back to normal. I tested since this morning with 100% and I still have 60% left, although most of the time left in idle mode, where as when I first got my phone, the battery drop to 80% after 20 minutes after unplug from the power.
I found the file - CF-Root-SGS3-v6.4.zip from this forum, after the installation, how can I tell my phone is rooted or not?
PS: Sorry I'm asking so many questions!
Click to expand...
Click to collapse
You would need to use an app that requires root privileges .
You can run 6.4 and then it is rooted ,
jje
Click to expand...
Click to collapse
can anyone expaing what the CP is meant for in this example
AP: I9300BUBLG3
CP: I9300BULG2
CSC: I9300VFGBLG3
This is just an example but on mine it has the wrong firmware numbers, how can I cange it?
My build number
Hello everyone, New guy here to this forum but not new to Android. I have had an andriod phone about 3-4 years ago and ended up with an apple product. I have just received the S3 International I-9305 version and wanting to root it because of the power drain and hoping to be able to control this. I have been reading the root section and was about to start but there was one thing it was asking and it was the build number. I have located on my settings on the about tab. I do not see a matching build number for some of the profiles they are asking to match. Can someone point me in the right direction with the info posted below. I would like to root the phone with a samsung based rom. themes will come later, and do I need to have a micro sd card to root? will this keep me from performing the task? My card is in the mail and I cant wait for it to begin rooting the phone. Here are my stats, I have also updated to the latest software and it still says 4.1.2.
Model:
GT-I9305
Version:
4.1.2
Baseband:
I9305XXBME1
Kernal Version:
3.0.31-1153417
[email protected] #1
SMP PREEMPT Wed May 29 17:23:28 KST
2013
Build Number:
JZO54K.I9305XXBME3
Thanks in advance!
how is it relevant to this thread? ask in the i9305 section
Cool, got help else where. I thought it would be relevant to determine the firmware needed to select to perform the root process.
Tapatalk on GSIII
Framaroot should work on all SGS and more but be aware that flashing something like in this case problably a kernel from SGS3 I9300 to a SGS3 I9305 will probably lead to a brick.