[Q] no service problem - Samsung Galaxy 5 I5500

Hi My phone can not get no service... I flashed it with froyo from america and since that my samsung i5500 can't get registered within my network providers (three.co.uk) i realised that when I go to service mode settings and chose band I cant tick on wcdma 2100 (on that band my phone was working perfectly) instead I can go for 1900. Is there any solution?
I think i need to reset the service mode settings.
Is that somehow possible?
I already reflashed it with other various roms. No positive results.
Is there anyway to wipe all data of the phone? no soft/hard reset (done it many times)
Format of system disks? then install the system on dead device?
I flashed the phone aswell with cyagoned rom and different various basebands and no result. please help me.

When you flash all the roms did you wipe data factory and cache partition ?
Sent from my GT-I5500L using Tapatalk

Related

[solved] mobile internet doesn't work anymore (htc hero - heroine++)

I could solve the problem with entering the data of my carrier as apn in the settings
--------------------
Yesterday I replaced my Touchscreen and installed the Custom ROM heroine++
But now my Mobile Internet is not working anymore. Wifi does work without problems. I already tried to disable and enable mobile internet and airplane mode, restarted my phone several times and finally installed another radio.
But I can't get my Mobile Internet to work.
Do you think a complete wipe of alle settings will make it work or should I consider a reinstall of heroine++? Or did I destroy something while changing my touchscreen?
Thanks in regard.
If your phone connecting to carrier (you can call) that try add your APN settings for your carrier.
Also you can make full wipe if your APN was install in rom by default.
And you can try other roms, radio or kernel. If you've got signal I don't think so you broked anything.

[Q] S5830M not being able to use the 850 MHz band

Hi,
TL;DR version below.
Note: This is just a traceback that may help diagnose the problem.
I "own" an Ace (S5830M, everything from i/C works fine). I was playing around with some custom ROMs and evertything was going pretty fine. I installed Jelly Blast (OTA 3) and flashed back to stock a few times, everything was fine and working. Used the recovery/backup functionality from CWM (5.0) to switch between the mentioned installations and it was all good.
Here start the real problem:
During one of the instalation of the custom ROM i went to Advanced -> Format /system (Because probably I miss read the instructions). After this the phone booted and didn't bootlooped, instead it just showed the initial logo (white letters, phone model. Not Samsung animation). As I noted it was stuck I flashed stock from Odin and got it working back.
Everything is fine, the phone works as intended, exept that it "can't" use the baseband I was using before (850 MHz frequency, 3G). I say "can't" because after n tries I was able to send 1 SMS, and only one. All the others failed. And on really unusual occasions I get signal and the phone tells me the provider (Kolbi/ICE) but after a few seconds it loses the connection/signal.
What I've tried so far:
Go to Settings->Wireless Connections->Movile Networks:
There I tried to choose my carrier, but isn't listed 99% the time. The other two are(Claro/movistar). So I set it to automatic.
Check IMEI:
It is the right one
Try to restore from a previous working state with CWM:
I can't it says that there's a MD5 missmatch. (Can I force it?)
Flash a Modem file that is known to work (With another, same model, phone and carrier)
Same sympthoms: does not work.
Dial *#197328640# and play with the settings:
Here I setted to: Type: DUAL_MODE_UMTS_PREF
Band: AUTO
These are the same settings that the working phone.
Flash the stock carrier-branded firmware.
Without luck so far.
====================================================
TL;DR
I have two phones, same model and same carrier. One does not detect the 850MHz band (3G to GMS) so I get no service 99.99% the time, but I was able to send a single SMS. All this after formating /system via CWM.
I've tried to use the same setup and setting from the working phone without success.
Any help or hint would be greatly appreciated.
Footnote: English is not my native language, please understand if I confused some of the tech terms even if IT is my field.
niant said:
Hi,
TL;DR version below.
Note: This is just a traceback that may help diagnose the problem.
I "own" an Ace (S5830M, everything from i/C works fine). I was playing around with some custom ROMs and evertything was going pretty fine. I installed Jelly Blast (OTA 3) and flashed back to stock a few times, everything was fine and working. Used the recovery/backup functionality from CWM (5.0) to switch between the mentioned installations and it was all good.
Here start the real problem:
During one of the instalation of the custom ROM i went to Advanced -> Format /system (Because probably I miss read the instructions). After this the phone booted and didn't bootlooped, instead it just showed the initial logo (white letters, phone model. Not Samsung animation). As I noted it was stuck I flashed stock from Odin and got it working back.
Everything is fine, the phone works as intended, exept that it "can't" use the baseband I was using before (850 MHz frequency, 3G). I say "can't" because after n tries I was able to send 1 SMS, and only one. All the others failed. And on really unusual occasions I get signal and the phone tells me the provider (Kolbi/ICE) but after a few seconds it loses the connection/signal.
What I've tried so far:
Go to Settings->Wireless Connections->Movile Networks:
There I tried to choose my carrier, but isn't listed 99% the time. The other two are(Claro/movistar). So I set it to automatic.
Check IMEI:
It is the right one
Try to restore from a previous working state with CWM:
I can't it says that there's a MD5 missmatch. (Can I force it?)
Flash a Modem file that is known to work (With another, same model, phone and carrier)
Same sympthoms: does not work.
Dial *#197328640# and play with the settings:
Here I setted to: Type: DUAL_MODE_UMTS_PREF
Band: AUTO
These are the same settings that the working phone.
Flash the stock carrier-branded firmware.
Without luck so far.
====================================================
TL;DR
I have two phones, same model and same carrier. One does not detect the 850MHz band (3G to GMS) so I get no service 99.99% the time, but I was able to send a single SMS. All this after formating /system via CWM.
I've tried to use the same setup and setting from the working phone without success.
Any help or hint would be greatly appreciated.
Footnote: English is not my native language, please understand if I confused some of the tech terms even if IT is my field.
Click to expand...
Click to collapse
Flash a new rom and kernel
Rahul4Ace said:
Flash a new rom and kernel
Click to expand...
Click to collapse
Yeah, that could fix it. BTW, was there any need to quote the whole OP?

[Q] No service, changed bands - please help

Hi, I have XiaoMi Mi2S and I just screwed up. In the service menu *#*#INFO#*#* I accidentally changed to the USA Band, Im in Europe. Since then I have absolutely no signal for any network. There isnt any other working option besides USA Band, no automatic, no EURO, just some nonworking nonsense........
Tried reset to factory, wiped cache, flashed new rom, flashed new kernel, flashed new baseband, flashed stock, NOTHING WORKS!
Can you please help me? What can I do?

[SOLVED] Accidentally changed the Radio Band to USA

So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Change the rom
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
I did the same thing by my mistake.And my le max 2 also became not able to connect internet. In my case, it can't connect both 4G and 3G .
But I fixed it. But I don't know that it get back to the original completely.
I'm japanese.And I'm sorry for that my English skil is very poor.
My current rom is Le2_X820-MAX_ROW-5.8.015S_V29_CUOCO92.
I used DFS CDMA TOOL and checked the items on the "Band Preferred" same as "RF BC Config".
1. download HTC Diag Driver. You have to customize .inf file later.
2. conect device to your windows pc and choose MTP and USB Debugging.
3. enter the follows command.
"adb shell"
"su"
"setprop sys.usb.config diag,adb"
When you enter this command, your device change over diag mode.
4. diag driver install.
You have to find hardwawer ID from device manager.
And replace the hardware ID in .inf file.
5. If you install diag driver correctly, you will be able to use DFS CDMA TOOL.
sorry, I can't explain any more..English is difficult...
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Ootp said:
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
Click to expand...
Click to collapse
Many thanks for the advice but it didn't help. I had installed the indian rom and then to the chinese without any change in the behavior of the modem. I'll try the chatmonchy's advice to see if there will be any improvement.
xterminater07 said:
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Click to expand...
Click to collapse
Actually I'm in Europe and looks like we use slightly different bands (??). I get 4G data but without calls. To other networks like 2G and 3G it connects sometimes but it's for few seconds only. I even don't remember what made me change the bands to USA, I guess I was curios what settings those were. The options are "USA band" and "Band 6", neither one is working well for my device. And strangely though, there is no other option to go back like "Auto" or something. It seems that I'm not the only one that did it. After a google search, it turned out that a lot of people had the same issue. For some, the factory reset helped, for others was flashing via TWRP the radio bands again.
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
valy_cta said:
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
Click to expand...
Click to collapse
That's good!!
I'm looking forward to your guide about unlock additional bands.
thread: [SOLVED] Accidentally changed the Radio Band to USA
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
readion said:
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
Click to expand...
Click to collapse
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
karellang said:
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Click to expand...
Click to collapse
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
Does not help. If I go to servise menu (dial *#*#4636#*#*) , I see Radio turned OFF and I canĀ“t change it. How to solve this ?
Did you post any guide how you solved the issue?
Unfortunately USA band selected
Hi,
I live in India. I bought Oppo F3 Plus (CPH1613) 4Gb Ram, 64GB Storage, Qualcomm MSM8976 Pro Snapdragon 653 a year ago and was working too much fine. I was wondering about Qualcomm mobile secret codes and found this *#*#4636#*#* . I dialed this and accidentally changed radio band to USA band and suddnly on instant my mobile didn't get any network signal. From then, I went for Oppo care, and mobile repairing shops and self tried and tested for lots of time; but everyone unable to bring phone to normal. I reset my mobile, flashed stock rom for countless times, wiped all data but nothing helped me out. Finally i rooted my oppo f3 plus and tried to boot in fastboot mode; but Oppo removed bootloader and fastboot mode from 2016 (as posted in XDA). I got a little link about resetting USA band to automate and is erasing modemst1 and modemst2. But again it have to be performed from fastboot.
Help me out for my mobile.
You can flash a modem file, it will reset it as well. Changing the ROM won't update the modem configuration. Try to search modem files and flash them via TWRP.

No data connection on H930DS on the 3 network, UK after reflashing Stock pie

I can't get the data connection to work at all, and it won't even connect to a 4g network even when the signal is strong. Mine is a H930DS (Joan?)
I just reinstalled the stock pie using "H93031a_00_OPEN_EU_OP_1105.zip", I installed in TWRP. I followed the instructions on the first page of this thread .....
I have tried various custom roms on this phone but this stock pie is one of the very few that even recognizes the sim card. I settled on stock pie inspite of the bloatware.
The problem happens when the rom is brand new, before ANYTHING is disabled or removed.
When I choose to search for a Network Operator (using the 3 Network sim) I get a "3 RAT-4G" and a "3 RAT-3G" listed and it will never connect to the 4G if I choose that one. It will only connect to the 3G. Even when the signal is very strong (5 bars). When I opt to connect to the 3G network then I get a stronger signal if I choose "GSM/WCDMA auto" in "settings>>network>>mobile netwroks>>network mode" but still no data connection
THESE DIDN'T HELP
1 - using ADB and restarting the phone in bootloader. It was to reset the modem I think. There was a series of 3 commands to follow. i can't remember the details of this method but I think one of the commands included "fastboot erase modemst2". I tried it and I was getting the same error message that other people reported and it didn't go anywhere.
2 - The following solution didn't work either..............
"re-loading IMS settings using the LG Hidden menu: Dial *#546368#*930# using the stock dialer -> Field Test -> IMS Setting -> Test -> Load Preset Configuration -> Initialize Configuration. Then back out twice to Field Test -> IMS Setting -> Test -> Restart IMS process. Give it a few minutes."
3 - Resetting network settings didn't help either (Settings -> General -> Reset -> Network settings reset).
4 - Changing APN, or network bands (in settings ... choosing "LTE/GSM/WCDMA auto" or "GSM/WCDMA auto" or "WCDMA only")
5 - Changing "set preffered network type" in engineering mode settings (accessing using *#*#4636#*#*)
How can I use data connection on my H930DS?
Data modem works now!
SOLVED!
My phone has bootloader unlocked and TWRP revcovery. That's obvious I know but I only say it again in case anyone tries this with a locked bootloader and using a stock rom that has never been flashed. (I have to warn you that your results will be different, your rom will be reset for sure an your data will be wiped).
I tried so many things, flashing up and down from 8 to 10 but Stock Pie was always the least buggy for me so I persevered with that.
I think this solution reset the hardware, but I am no expert.
The solution is basically a "Factory Reset (R&D Only)". They warn you against it but with my configuration all it did was reboot the phone into recovery and then left it for me to decide what to flash or wipe, as per usual. What I only realized later, when I rebooted into system (without changing anything in TWrP) was that it had reset the hardware, or reactivate data connectivity. NowI have 3g data connection and 4g connection.
THE SOLUTION
*the following 4 lines are a direct quote (my phone's os DID NOT reset)
1) Backup everything, as the phone will be wiped. If yours is a network unlocked carrier model, make sure you have an unlock code (or unlock approval if T-Mobile).
2) Remove your Google account to disable Android Device Reset Protection.
3) Dial *#546368#*930# (replace 930 with your model number). This should open the service menu. From there SVC Menu - Factory Reset (R&D Only).
This takes quite a bit longer than normal Factory Reset. Your phone is now TRULY back to factory state.
I took out the sim and sd card before I committed to the reset. But like I said, it didn't wipe anything (maybe it would have wiped my sd card but I am not testing that). It just booted into recovery and when I rebooted into system I found that the data connection was working. Now finally it is a smartphone!

Categories

Resources