Hi,yesterday I've bought 2nd-hand SGS2.Today I try to install Lite'ning ROM without ROOTING first.But,FAILED.Can anybody show me how/where to flash STOCK GT-I9100 ROM.Now, my device can't BOOTING.
Hi! In which country do you live or have you bought it? You can go to samfirmware.com and register! Its free. They offer a lot of firmware s2, s,... If you have any questions just pm me!
Sent from my GT-I9100
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
GalaxyHacker said:
Hi! In which country do you live or have you bought it? You can go to samfirmware.com and register! Its free. They offer a lot of firmware s2, s,... If you have any questions just pm me!
Sent from my GT-I9100
Click to expand...
Click to collapse
GH,thank you.I'm from Malaysian.I have go to samfirmware.com and registered.but,the problem is I can't verify my device firmware because my devise can't boot-up.
You want gingerbread right? For european?
No wait asian?
Give me a minute
Sent from my GT-I9100
JJEgan said:
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
I can't verify my firmware version...
Ok i need to know 2 things:
Have you bought it in asia or in europe?
And: do you want 2.3.3 or 2.3.4?
Sent from my GT-I9100
GalaxyHacker said:
You want gingerbread right? For european?
No wait asian?
Give me a minute
Sent from my GT-I9100
Click to expand...
Click to collapse
No wait asian?if I used european firmware,is it no problem to detect asian baseband?
Well try european first. Do you know how to direct message in xda?
Sent from my GT-I9100
GalaxyHacker said:
Ok i need to know 2 things:
Have you bought it in asia or in europe?
And: do you want 2.3.3 or 2.3.4?
Sent from my GT-I9100
Click to expand...
Click to collapse
I have bought in asian.I can remember my Android version was 2.3.4.but,I can't remember the firmware version.
GalaxyHacker said:
Well try european first. Do you know how to direct message in xda?
Sent from my GT-I9100
Click to expand...
Click to collapse
please teach me.
Lets fix your phone as fast as we can, shall we?
First download the OZHKH1 2.3.4 from samfirmware. Tell me when done, ok?
Dm: go to USER CP on the top bar of that page. Then click send new private message. Type in GalaxyHacker to the recipients field.
Sent from my GT-I9100
Finished?
Sent from my GT-I9100
GalaxyHacker said:
Finished?
Sent from my GT-I9100
Click to expand...
Click to collapse
not finish yet.regular downloading need 1 1/2hours.after that,I have to flash with single file only,right?
I made a mistake sry please download the european xxkh1 2.3.4 really sry
And we'll flash with 4 files to ensure the modem etc are all the same to not screw up your phone.
Do you need it now or could you wait say 8 hours?
Sent from my GT-I9100
GalaxyHacker said:
I made a mistake sry please download the european xxkh1 2.3.4 really sry
And we'll flash with 4 files to ensure the modem etc are all the same to not screw up your phone.
Do you need it now or could you wait say 8 hours?
Sent from my GT-I9100
Click to expand...
Click to collapse
Yes,I need it now.
So how long will it take till its loaded pretty late over here
Sent from my GT-I9100
GalaxyHacker said:
So how long will it take till its loaded pretty late over here
Sent from my GT-I9100
Click to expand...
Click to collapse
very slow bandwidth at my area.I will wait untill finish to booting up my lovely phone.
Ok im tired now. When download finished extract the zip with password samfirmware.com.
Open odin and in pit select the pit in the downloaded folder,
Click pda and select the code_i9100... file
Click phone and select the modem_... File
Click csc and select the gt_i9100-csc-multi... File.
Put the s2 into download mode (google) (be sure you installed samsung usb software and updated it via windows update)
When connected a yellow box will appear and the pc will recognize it.
Ensure you have enough battery and click start.
Dont disconnect the phone this could really brick it.
When done it will reboot and work. If it worked, don't forget to say thank you!
Sent from my GT-I9100
GalaxyHacker said:
Ok im tired now. When download finished extract the zip with password samfirmware.com.
Open odin and in pit select the pit in the downloaded folder,
Click pda and select the code_i9100... file
Click phone and select the modem_... File
Click csc and select the gt_i9100-csc-multi... File.
Put the s2 into download mode (google) (be sure you installed samsung usb software and updated it via windows update)
When connected a yellow box will appear and the pc will recognize it.
Ensure you have enough battery and click start.
Dont disconnect the phone this could really brick it.
When done it will reboot and work. If it worked, don't forget to say thank you!
Sent from my GT-I9100
Click to expand...
Click to collapse
OK.I will try..
Related
hello iam looking for a european UK stock rom this has probally been covered already but i dont have the time time to search for it if someone could please provide a link for this rom i would be very greatfull.
centrezuk said:
hello iam looking for a european UK stock rom this has probally been covered already but i dont have the time time to search for it if someone could please provide a link for this rom i would be very greatfull.
Click to expand...
Click to collapse
Which carrier are you with?
LolNade said:
Which carrier are you with?
Click to expand...
Click to collapse
thats a good question.. i plan to sell the phone so iam unsure iam trying to make the phone back to how i bought it.
Is there any way for you to check that out?
http://hotfile.com/dl/145756600/2386627/S5830BUKC2_VODKC1_XXKA6.zip.html
UK Vodafone
http://hotfile.com/dl/146655962/5fa311c/S5830XWKPN_S5830XWKP6_S5830XEUKP1.zip.html
Plain stock for UK and Ireland
http://hotfile.com/dl/145796682/0fe3bd0/S5830XWKPY_S5830XWKPA.zip.html
This one is the Update of the one its above also released for UK and Ireland
http://hotfile.com/dl/145828781/ed165d7/S5830XWKS3_S5830VIRKP1_VIR.zip.html
Released Exclusively for UK (Recomend this one)
http://hotfile.com/dl/145846922/a2913d4/S5830BUKS1_S5830VODKS1_VOD.zip.html
http://hotfile.com/dl/146330164/d393eea/S5830BUKS2_S5830VODKS1_VOD.zip.html (Latest One)
Update's of the Vodafone UK Rom
LolNade said:
Is there any way for you to check that out?
Click to expand...
Click to collapse
no mate iam trying to restore it to original then sell it.
Thank you so much! just what i was searching for, i got odin and a file cooper_v1.0.ops iam unsure what to do with this file?
Thank you so much! just what i was searching for, i got odin and a file cooper_v1.0.ops iam unsure what to do with this file?
put cooperops in ops section ... check one package file onption .. and at the bottom choose hit one package and select the one file you've download from the rom ... put your phone in dowload mode! conect your phone to the pc -
... wait for odin to recgonize it (yellow sign will light up) ... hit start ... wait until odin says pass
http://www.youtube.com/watch?v=yo_Dp-uuFlk
SnowPluralism said:
put cooperops in ops section ... check one package file onption .. and at the bottom choose hit one package and select the one file you've download from the rom ... put your phone in dowload mode! conect your phone to the pc -
... wait for odin to recgonize it (yellow sign will light up) ... hit start ... wait until odin says pass
http://www.youtube.com/watch?v=yo_Dp-uuFlk
Click to expand...
Click to collapse
hi sorry to bother you again i tried these steps watched the video but my phone is stuck in bootloop after using odin any ideas? does the rom need to be the same basband as my phone for it to work?
aha finally done it! had to do a wipe thank you Sir for your good instructions you are a gentleman thank you.
centrezuk said:
aha finally done it! had to do a wipe thank you Sir for your good instructions you are a gentleman thank you.
Click to expand...
Click to collapse
I forgot to mention the wipe Sorry but im glad you resolve it
Sent from my GT-S5830 using xda premium
Hi am new to here but i am could not find any help searching for this problem
would someone help me
i got this phoen few weeks ago and i started to play with it and then i update using there update region canada . i got this phone from the usa and it was unbranded and now when i try to go to cwm it does not show me that it shows me Andriol system Recovery (3e) and i get restore.
i thinink that samsoung update the wrong firmware and now i dont know which one to use to restore it back
on the kernal it shoes me 3.0.15
and my baseband version is ublf2
and build number is ubalf3
please help
thank You
no one can help me with this
Download
cwm 5.8.4.5 and flash it via odin
then ur ready to go
Sent from my GT-I9300 using xda premium
i haved try that and it still show me this weird one not cwm
i think i just have to do a new firmware but i am not sure which one to use i got this phone from newegg but and update the firmware and now it shows me base band version blf2
and build number balf3
the phone works but it just dont want to go that cwm menu
i have try to install a new kernel but it was done and restart and nothing shows
it just shows 3.0.15
if i update the kernal to SiyahKernel S3 ?
thank you
andrzejvan said:
i haved try that and it still show me this weird one not cwm
i think i just have to do a new firmware but i am not sure which one to use i got this phone from newegg but and update the firmware and now it shows me base band version blf2
and build number balf3
the phone works but it just dont want to go that cwm menu
i have try to install a new kernel but it was done and restart and nothing shows
it just shows 3.0.15
if i update the kernal to SiyahKernel S3 ?
thank you
Click to expand...
Click to collapse
siyah kernal updates your kernal not the recovery
go to samfirmware.com
and find the firmware of ur liking and download
first try flashing this... make sure its i9300 not i9300t
http://forum.xda-developers.com/showthread.php?t=1684535
FIRST .
http://forum.xda-developers.com/showthread.php?t=1757755
I9300 International root and CWM
http://forum.xda-developers.com/showthread.php?t=1695238
jje
i went to that samfimware webpage
but i dont see any that are close to may
i have
ap: ubalf3
cp the same
scsc uubalf3
which one should i choose
thank you
i went to this web page and i found that ubalf3
is Brazil but i got this from usa
so should i try download that one from this webpage
region zto or ttt
now i am really getting confused
i found a webpage that has them
samsung-updates
andrzejvan said:
i went to this web page and i found that ubalf3
is Brazil but i got this from usa
so should i try download that one from this webpage
region zto or ttt
now i am really getting confused
i found a webpage that has them
samsung-updates
Click to expand...
Click to collapse
if u got the one u like , download and flash that mate
Sent from my GT-I9300 using xda premium
everythink works perfect now
thank you
i got one more question i seen on of the user had a icon of the cpu and temp on the upper middle screen where is the nofication i am just wondering do any of you know where i could get that . That looks cool
Thank You Again
Search for CPU Widget in Play Store and pick the one you like best
ok thank s
andrzejvan said:
everythink works perfect now
thank you
i got one more question i seen on of the user had a icon of the cpu and temp on the upper middle screen where is the nofication i am just wondering do any of you know where i could get that . That looks cool
Thank You Again
Click to expand...
Click to collapse
that is cool tool
here u go
http://market.android.com/search?q=pname:ds.cpuoverlay )
Sent from my GT-I9300 using xda premium
I think this might be the app your looking for...
https://play.google.com/store/apps/details?id=ccc71.pmw&hl=en
Sent from my i727 DÅÅTH machine
i like that cool tool
thank you
andrzejvan said:
i like that cool tool
thank you
Click to expand...
Click to collapse
pressing thanku wont harm either
Sent from my GT-I9300 using xda premium
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
archvoidz said:
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
Click to expand...
Click to collapse
CHN?
CHM or CHU?
and are you sure is i9300 and not i9308?
archvoidz said:
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
Click to expand...
Click to collapse
I9300ZCBLH3
http://kuai.xunlei.com/d/EMRTHMAPDAHC
http://kuai.xunlei.com/d/EMZMNIDTRNNO
Defineptly gt i9300 and it is chn chn
Odia said:
CHN?
CHM or CHU?
and are you sure is i9300 and not i9308?
Click to expand...
Click to collapse
It is a gt 19300 and is chn chn
archvoidz said:
It is a gt 19300 and is chn chn
Click to expand...
Click to collapse
So the links provided by livaye above should be fine.
Doesnt work
Odia said:
So the links provided by livaye above should be fine.
Click to expand...
Click to collapse
I tried that firmware but odin fails again. It loads two bars and then fails. what could be causing this?
Zsblh3
livaye said:
I9300ZCBLH3
Click to expand...
Click to collapse
The one i tried flashing is named zsblh3 as opposed to the zcblh3 link that u gave me. is there a difference or are they for different android os. I wanted the ics one.
archvoidz said:
The one i tried flashing is named zsblh3 as opposed to the zcblh3 link that u gave me. is there a difference or are they for different android os. I wanted the ics one.
Click to expand...
Click to collapse
ZS will only work on the International i9300, you need to use ZC or ZN for the Chinese i9300.
oh
Odia said:
ZS will only work on the International i9300, you need to use ZC or ZN for the Chinese i9300.
Click to expand...
Click to collapse
ur really helpful! thanks for helping me, imma download the zc one and ill get back to you. will this work? and if it fails again, any damages?
archvoidz said:
ur really helpful! thanks for helping me, imma download the zc one and ill get back to you. will this work? and if it fails again, any damages?
Click to expand...
Click to collapse
It should work fine so long as the signatures in your phone have not got messed up.
confused
Odia said:
It should work fine so long as the signatures in your phone have not got messed up.
Click to expand...
Click to collapse
he gave me two links. one i should flash as a pda how about the other one?
archvoidz said:
he gave me two links. one i should flash as a pda how about the other one?
Click to expand...
Click to collapse
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
never done three
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
ive always done just the pda... what i the modem for cause i have yet to get a sim for the device.... is this different than just the pda?
archvoidz said:
ive always done just the pda... what i the modem for cause i have yet to get a sim for the device.... is this different than just the pda?
Click to expand...
Click to collapse
The firmware in the links is what is called a FULL firmware, these firmware are much better than the HOME firmware packages which are just update firmwares. I never use HOME packages.
trouble with download
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
something called thunder keeps downloading when i download the zip...
archvoidz said:
something called thunder keeps downloading when i download the zip...
Click to expand...
Click to collapse
I see you dont read Chinese then :laugh:
Under the file name press the Orange button and then when the dialog pops up press the 2nd button.
...
Odia said:
I see you dont read Chinese then :laugh:
Under the file name press the Orange button and then when the dialog pops up press the 2nd button.
Click to expand...
Click to collapse
what i understand is that thunder is a torrent program and it is torrenting the zip file right? cause only when i downloaded thunder did it let me download the zip
archvoidz said:
what i understand is that thunder is a torrent program and it is torrenting the zip file right? cause only when i downloaded thunder did it let me download the zip
Click to expand...
Click to collapse
Thunder is a download manager, just do what I wrote above.
ok
Odia said:
Thunder is a download manager, just do what I wrote above.
Click to expand...
Click to collapse
can i pm u if i have anymore questions?
messed up
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
Okay so i did what you said but it doesnt even begin to flash or fail. It just says MD5 hash value is invalid and end....
What do i do? also, there were 3 files in that zip. the last one is a pit file. Should i put that in the put slot and flash again?
Hi all
How should I flash the OTA flash files downloaded from Samfirmware?? Should I use ADB?? If yes, can anyone tell me the commands??
I normally flash phones with SPT/RIFF box, so I am a bit rusty in ADB
Kind regards
I'd say use Odin. But just to be sure, Check the stickies in the general forum. Use the search if not sure.
Sent from my GT-I9300 using xda app-developers app
Hi!
Just use odin to flash the firmware.. i'm pretty sure most of the fw would just be on PDA in odin.
Sent from my GT-I9300 using xda premium
Ratata82 said:
Hi all
How should I flash the OTA flash files downloaded from Samfirmware?? Should I use ADB?? If yes, can anyone tell me the commands??
I normally flash phones with SPT/RIFF box, so I am a bit rusty in ADB
Kind regards
Click to expand...
Click to collapse
If you are talking about OTA and not the full firmware..it has to be flashed in stock recovery...first make sure you have the correct firmware version on your phone..the firmware version required will be given alongside the OTA on samfirmware..now move the OTA to your sdcard..reboot into stock recovery..use vol up+power+home buttons..then choose install update from there..
I need to do this. I'll do a Titanium Backup before, but should I expect all my content, apps, preferences and all that to be intact after the procedure (presuming everything goes the way it should)?
Edit: Also, why can't I see an option for United States in the drop-down menu when narrowing down my device? Should I use some other country?
Diashi said:
I need to do this. I'll do a Titanium Backup before, but should I expect all my content, apps, preferences and all that to be intact after the procedure (presuming everything goes the way it should)?
Edit: Also, why can't I see an option for United States in the drop-down menu when narrowing down my device? Should I use some other country?
Click to expand...
Click to collapse
Just did this last night over Kies. No problems at all. On 4.1 from 4.0 and all is well.
zoot1 said:
If you are talking about OTA and not the full firmware..it has to be flashed in stock recovery...first make sure you have the correct firmware version on your phone..the firmware version required will be given alongside the OTA on samfirmware..now move the OTA to your sdcard..reboot into stock recovery..use vol up+power+home buttons..then choose install update from there..
Click to expand...
Click to collapse
And do you know what this ota files are used for? I've an S5830 from Vodafone(Spain) and I want to get it back to the original firm (you know, operator apps and some more innecesary ****), but I'm unable to find one on the internet.
Looking at www.samfirmware.com, the only thing I've seen about my device and Vodafone is the OTA file i'm talking about, but I'm not pretty sure if flashing it will let my phone in factory defaults.
I need to flash a Vodafone rom because I wanna send it to the technical support.
raymanlololo said:
And do you know what this ota files are used for? I've an S5830 from Vodafone(Spain) and I want to get it back to the original firm (you know, operator apps and some more innecesary ****), but I'm unable to find one on the internet.
Looking at www.samfirmware.com, the only thing I've seen about my device and Vodafone is the OTA file i'm talking about, but I'm not pretty sure if flashing it will let my phone in factory defaults.
I need to flash a Vodafone rom because I wanna send it to the technical support.
Click to expand...
Click to collapse
Find a Vodafone Spain Rom, it should be over 200mb, then download Odin for your galaxy ace, it should be in the ace forum. Then flash it. Check the link below.
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GT-I9300 using xda app-developers app
kofiaa said:
Find a Vodafone Spain Rom, it should be over 200mb, then download Odin for your galaxy ace, it should be in the ace forum. Then flash it. Check the link below.
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Dude, that's the problem: I can't find a Vodafone Spain Rom. I've seen it from several countries, but not from spain.
Also in SF are others operators roms for s5830, but not from vodafone.
raymanlololo said:
Dude, that's the problem: I can't find a Vodafone Spain Rom. I've seen it from several countries, but not from spain.
Also in SF are others operators roms for s5830, but not from vodafone.
Click to expand...
Click to collapse
Oh ok, when I get on my pc I'll see if I can help, you are ok with froyo or gb right?
Sent from my GT-I9300 using xda app-developers app
kofiaa said:
Oh ok, when I get on my pc I'll see if I can help, you are ok with froyo or gb right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Don't mind the version, but I need that it be from vodafone. I'll update it later with kies if neccesary
Hi everyone. i need help plz about getting back to stock rom and kernel. i flashed few files before but allmost all of them is not to sweden. about my carrier, i dont want to be locked to any carrier. i just want it to be able to use the phone with any sim card. i got odin software and all the drivers installed so everything good to go! i just need the firmware download link or file to be able to flash it through odin.
let me know what information you want to know.
this is the information about the firmware im on right now
PDA: I9100XWLS8
PHONE: I9100XXLS8
CSC: I9100FOPLS3
Build info: Mon Jan 14 16:51:42 KST 2013
ask for more information if you need to know about anything.
thanks
did you ever use the "search"?
http://www.sammobile.com/firmwares/
Sv: [Q] stock firmware to sweden!
Exact. Use search nordic firmware is on SamFirmware
Skickat från min GT-I9100 via Tapatalk 2
wishmas7er said:
did you ever use the "search"?
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
i do use the search but the only firmwares i found is for tre network and i dont want it to be locked to tre or customized to tre.i want the one that comes with the phone when u buy it from Samsung shops. and thanks for the site i didnt found that before but it show the same firmware that i almost found in all the forms i been in.
bihslk said:
Exact. Use search nordic firmware is on SamFirmware
Skickat från min GT-I9100 via Tapatalk 2
Click to expand...
Click to collapse
thanks, found it and downloading now. will give it a try maybe it the one! tack
ok i gave up.. every firmware i download and start to extract it show me that its brocken file. and even other firmware i install the phone doesnt start up and it just bootloop all the time
any thing should i do?
Get mobile odin pro and flash nordic LSD.
Sent from the little guy
mahmoudsalem91 said:
ok i gave up.. every firmware i download and start to extract it show me that its brocken file. and even other firmware i install the phone doesnt start up and it just bootloop all the time
any thing should i do?
Click to expand...
Click to collapse
Download same file from annother site. Something is wrong ay Sam right now. Just search. I can send you a link if you want
Sent from my GT-I9100 using Tapatalk 2
bihslk said:
Download same file from annother site. Something is wrong ay Sam right now. Just search. I can send you a link if you want
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I think I'm really bad at the search part lol if you please can u send me the links for the download page?
I don't know what's wrong. I have downloaded over 5 firmwares and all of them has broken files
Thanks
gastonw said:
Get mobile odin pro and flash nordic LSD.
Sent from the little guy
Click to expand...
Click to collapse
Is it an apk file or computer software?
Mobile Odin is an app available in the Playstore.
Sent from my SGS II
immortalneo said:
Mobile Odin is an app available in the Playstore.
Sent from my SGS II
Click to expand...
Click to collapse
ok thanks, got it and installed it but where sould i get nordic LSD firmware from? sorry im new to samsung phones, it was easier i think with HTC and Ericsson phones
mahmoudsalem91 said:
ok thanks, got it and installed it but where sould i get nordic LSD firmware from?
Click to expand...
Click to collapse
This question has already been answered in this thread before, right?
"did you ever use the 'search'?
http://www.sammobile.com/firmwares/"
Sent from my SGS II
immortalneo said:
This question has already been answered in this thread before, right?
"did you ever use the 'search'?
http://www.sammobile.com/firmwares/"
Sent from my SGS II
Click to expand...
Click to collapse
hahahaha lol sorry, ok i hope that is the right one and not broken ( I9100XWLSD ) <--- that the one?
mahmoudsalem91 said:
hahahaha lol sorry, ok i hope that is the right one and not broken ( I9100XWLSD ) <--- that the one?
Click to expand...
Click to collapse
Yup.. thats the one.. you can verify its MD5 checksum to test if the file is complete or corrupted before flashing..
Sent from my SGS II
immortalneo said:
Yup.. thats the one.. you can verify its MD5 checksum to test if the file is complete or corrupted before flashing..
Sent from my SGS II
Click to expand...
Click to collapse
yub file broken. didnt extract. i found this one ( I9100XXLSJ_I9100OXXLS1_OXX) but it shows not supported firmware in kies. i think i will just get over that and have this one for a while. thanks man have a good day
mahmoudsalem91 said:
yub file broken. didnt extract.
Click to expand...
Click to collapse
Happy to help, always. Just make sure files you download are not corrupted. You can even brick your device if you flash corrupted files! Believe me, I know..
Sent from my SGS II