Hi,
I've followed the instructions and installed the F15C Eagle patch / kernel for the Touchpad and all it working nice and fast.
Saying that I'm getting some issues with apps hanging but that may be my wifi.
Is there a documented way to reverse the changes that the F15C Eagle makes and un-install it and put back to the original state?
Thanks
Lee
Go into preware-> installed-> kernels. Select remove at the bottom.
Hi, if you want to uninstall the kernel. Simply go to preware, allow it to load. Then click on all application --> Kernel ---> Recovery kernel ---> Install that and will reset it to the original kernel. Then you can install other kernels as you please. Good luck, I found that the uberkernel is the best.
Thanks all. Thought I'd check first - didn't want to turn it into £115 paperweight!
lsainsbury said:
Thanks all. Thought I'd check first - didn't want to turn it into £115 paperweight!
Click to expand...
Click to collapse
dont worry, its very hard to brick ;p
[Q] Removing F15c Eagle after Reset
I searched for this but couldnt find anything, I seen the instructions to remove F15c Eagle but they don't work for me.
Basically I had F15c Eagle on the machine and did a factory reset, now I've reinstalled preware/govnah added all the feeds etc.. but it doesn't show that F15c is installed (when it actually is, even when I did the factory reset, when the machine rebooted I got the F15c boot loader screen and I am able to use Govnah to overclock)
Also the F15C Eagle Touchpad Icon is showing in my Downloads, when I click on it I just get a black minimized screen, if I tap into it, it goes full screen but nothing happens, and I can't click on the Dropdown arrow at the top left like other apps.
How can I uninstall F15c? I tried "installing it" but it gives me this error after it downloads and tries to install
begin
Nothing Interesting.
download
% Total % Received % Xferd Average Speed Time Time Time Current
86 4844k 86 4169k 0 0 482k 0 0:00:10 0:00:08 0:00:02 702k
100 4844k 100 4844k 0 0 533k 0 0:00:09 0:00:09 --:--:-- 866k
identify
org.webosinternals.kernels.psycho-f15c-kernel-touchpad
install
{"returnValue":true , "ticket":1, "subscribed":true}
{ "ticket":1 , "status":"STARTING" }
{ "ticket":1 , "status":"CREATE_TMP" }
{ "ticket":1 , "status":"VERIFYING" }
{ "ticket":1 , "status":"IPKG_INSTALL" }
{ "ticket":1 , "status":"SUCCESS" }
mkdir-prerm
Nothing Interesting.
install-prerm
Nothing Interesting.
postinst
-1: Unable to run command: IPKG_OFFLINE_ROOT=/media/cryptofs/apps /bin/sh /media/cryptofs/apps/usr/lib/ipkg/info/org.webosinternals.kernels.psycho-f15c-kernel-touchpad.postinst 2>&1
Kernel confirmed to be compatible with this webOS version
Verifying no existing modifications to target files ...
Verification failed on /boot/System.map-2.6.35-palm-tenderloin
Verification failed on /boot/config-2.6.35-palm-tenderloin
Verification failed on /boot/uImage-2.6.35-palm-tenderloin
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/arch/arm/common/cpaccess.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/arch/arm/mach-msm/dma_test.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/crypto/ansi_cprng.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/media/video/gspca/gspca_main.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/net/wireless/libra/librasdioif.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/scsi/scsi_wait_scan.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/video/backlight/lcd.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/net/ipv4/tcp_bic.ko
Device kernel is not in factory condition, refusing to install replacement
remove
Removing package org.webosinternals.kernels.psycho-f15c-kernel-touchpad from root...
(offline root mode: not running org.webosinternals.kernels.psycho-f15c-kernel-touchpad.prerm)
delete
Nothing Interesting.
failed
Nothing Interesting.
dsenart said:
I searched for this but couldnt find anything, I seen the instructions to remove F15c Eagle but they don't work for me.
Basically I had F15c Eagle on the machine and did a factory reset, now I've reinstalled preware/govnah added all the feeds etc.. but it doesn't show that F15c is installed (when it actually is, even when I did the factory reset, when the machine rebooted I got the F15c boot loader screen and I am able to use Govnah to overclock)
Also the F15C Eagle Touchpad Icon is showing in my Downloads, when I click on it I just get a black minimized screen, if I tap into it, it goes full screen but nothing happens, and I can't click on the Dropdown arrow at the top left like other apps.
How can I uninstall F15c? I tried "installing it" but it gives me this error after it downloads and tries to install
begin
Nothing Interesting.
download
% Total % Received % Xferd Average Speed Time Time Time Current
86 4844k 86 4169k 0 0 482k 0 0:00:10 0:00:08 0:00:02 702k
100 4844k 100 4844k 0 0 533k 0 0:00:09 0:00:09 --:--:-- 866k
identify
org.webosinternals.kernels.psycho-f15c-kernel-touchpad
install
{"returnValue":true , "ticket":1, "subscribed":true}
{ "ticket":1 , "status":"STARTING" }
{ "ticket":1 , "status":"CREATE_TMP" }
{ "ticket":1 , "status":"VERIFYING" }
{ "ticket":1 , "status":"IPKG_INSTALL" }
{ "ticket":1 , "status":"SUCCESS" }
mkdir-prerm
Nothing Interesting.
install-prerm
Nothing Interesting.
postinst
-1: Unable to run command: IPKG_OFFLINE_ROOT=/media/cryptofs/apps /bin/sh /media/cryptofs/apps/usr/lib/ipkg/info/org.webosinternals.kernels.psycho-f15c-kernel-touchpad.postinst 2>&1
Kernel confirmed to be compatible with this webOS version
Verifying no existing modifications to target files ...
Verification failed on /boot/System.map-2.6.35-palm-tenderloin
Verification failed on /boot/config-2.6.35-palm-tenderloin
Verification failed on /boot/uImage-2.6.35-palm-tenderloin
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/arch/arm/common/cpaccess.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/arch/arm/mach-msm/dma_test.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/crypto/ansi_cprng.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/media/video/gspca/gspca_main.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/net/wireless/libra/librasdioif.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/scsi/scsi_wait_scan.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/drivers/video/backlight/lcd.ko
Verification failed on /lib/modules/2.6.35-palm-tenderloin/kernel/net/ipv4/tcp_bic.ko
Device kernel is not in factory condition, refusing to install replacement
remove
Removing package org.webosinternals.kernels.psycho-f15c-kernel-touchpad from root...
(offline root mode: not running org.webosinternals.kernels.psycho-f15c-kernel-touchpad.prerm)
delete
Nothing Interesting.
failed
Nothing Interesting.
Click to expand...
Click to collapse
I am having same issue
I need to send touchpad to HP for repair
I did full reset before removing kernel from Preware....
Can't install or remove F15C right now..
I'm going to try webOS doctor...
importpsycho said:
I am having same issue
I need to send touchpad to HP for repair
I did full reset before removing kernel from Preware....
Can't install or remove F15C right now..
I'm going to try webOS doctor...
Click to expand...
Click to collapse
Hmm. I seem to have the same issue. Any luck using webos doctor?
I always figured Webos Doctor was kind of a last gasp solution. What I did to fix the F15C inability to install, uninstall, was go to Preware and I installed the "Palm Kernal (Touchpad)" stock kernal first. Crossed my finger as I system rebooted. Seemed like the longest reboot ever. Double checked with Govnah that I was indeed back to crappy, stock, 1.2Ghz, then went back into Preware and installed the latest version of F15C. Reboot, rinse, lather, repeat. Now I'm back to the OC'd state and F15C is back to normal. I hope this helped. If you guys did Webos Doctor, please post your result. I'd like to know for future instance when I might need it .
mojojokho said:
Hmm. I seem to have the same issue. Any luck using webos doctor?
Click to expand...
Click to collapse
1. open preware
2. install the recovery kernel
3. reinstall the kernel which you want to install
Related
After some google action, I'm posting my problem here:
Scenary:
Gear: Motorola Atrix 4G AT&T - stock ROM (4.5.91, Android 2.3.4, WebTop version WT-1.2.0-110)
1. run webtop2sd (1.1.2) - OK
2. running web scripts - OK
Then when trying to install for example openoffice.org or trying to do:
# sudo dpkg-reconfigure tzdata
(setting to Europe/Ljubljana - or any other location for that matters)
Current default timezone: 'Europe/Ljubljana/
date: invalid date 'Wed Oct 5 07:06:25 UTC 2011'
This is the reason why packages that update or configure tzdata (tzdata-java) fail with apt-get or synaptic.
What I tried:
probably all locations with reconfiguring tzdata.. fail
manualy edited timezone.. fail
removing&reinstaling tzdata.. epic fail
Anybody else has this issue... solved ?
Same here! Any help would be greatly appreciated.
Not the right answer, but this works...
I was having the same problem, and after a few hours of struggling, here's what I eventually did.
Edit the file /var/lib/dpkg/info/tzdata.postinst and on the first blank line (3 rows down) just put exit 0 which makes the script stop and return a success. This isn't a good solution, but it does work.
Now i can go on my merry way installing things to my hearts content, but I'd love to hear if someone has a proper solution...
conundri said:
I was having the same problem, and after a few hours of struggling, here's what I eventually did.
Edit the file /var/lib/dpkg/info/tzdata.postinst and on the first blank line (3 rows down) just put exit 0 which makes the script stop and return a success. This isn't a good solution, but it does work.
Now i can go on my merry way installing things to my hearts content, but I'd love to hear if someone has a proper solution...
Click to expand...
Click to collapse
thanks a millon man,that totally fixed my problem I was having with my webtop
I took another look at this and has anyone tried adding exit 0 to just after the second to last fi close of the if then part at the bottom, I use dthe workaround posted above and went back looked over it more after having installed a few programs and added exit 0 to line 46 and it seems to be working fine. Can some one confirm this for me if they are looking at it for the first time on their version of webtop.
Hi there, I have a new install webtop2sd, and the script still failed after adding exit 0 at line 46. I have put exit 0 at line 3 afterwards to get past the problem.
I figured out the cause of the 'invalid date' problem. Actually the bug is on the end of the file in the following lines:
Code:
UTdate=$(LC_ALL=C TZ=UTC0 date -d "$TZBase")
TZdate=$(unset TZ ; LANG=C date -d "$TZBase")
The problem is that webtop uses Busybox instead of the 'original' tools. Busybox has an incomplete implementation of 'date -d'. Replacing it with an alternative like GNU Tools is the best solution for this problem. But this could be complicated and I have not much time. Adapting this script to Busybox is easier and still better than the 'exit' workaround.
All you have to do is replacing the line
Code:
TZBase=$(LC_ALL=C TZ=UTC0 date)
with
Code:
TZBase=$(LC_ALL=C TZ=UTC0 date +%m%d%H%M%Y.%S)
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
[email protected]:/$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
obconf leafpad lxde-common linux-libc-dev lxrandr pcmanfm lxde-core lxappearance gpicview libc6-dev lxpanel
lxde-settings-daemon xarchiver
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
3 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.5) ...
* Stopping MySQL database server mysqld [ OK ]
mkdir: cannot create directory `/var/log/mysql': No such file or directory
dpkg: error processing mysql-server-5.0 (--configure):
subprocess post-installation script returned error exit status 1
Setting up libapache2-mod-php5 (5.2.6.dfsg.1-3ubuntu4.6) ...
readlink: invalid option -- 'q'
BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) multi-call binary
Usage: readlink [-f] FILE
Display the value of a symlink
Options:
-f Canonicalize by following all symlinks
ucf: Unable to determine The new file
dpkg: error processing libapache2-mod-php5 (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of php5-mysql:
php5-mysql depends on phpapi-20060613+lfs; however:
Package phpapi-20060613+lfs is not installed.
Package libapache2-mod-php5 which provides phpapi-20060613+lfs is not configured yet.
dpkg: error processing php5-mysql (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
mysql-server-5.0
libapache2-mod-php5
php5-mysql
E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand...
Click to collapse
vctshim said:
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
Click to expand...
Click to collapse
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
douglasroos said:
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
Click to expand...
Click to collapse
I found out it is impossible. Many repos are dead and crucially Ubuntu in this is outdated (without LTS)
I sold the Atrix and bought ARM-based Open PCs (e.g. Raspberry Pi, Cubieboard, Beaglebone Black, Udoo, etc..)
If you want low-power web server, this might be the way to go
(Ubuntu Phone might work but I'm not sure YET)
Hello everyone. I have install NeatRom 5.3.1 and Dorimanx 8.43. How fix freezing phone in deep sleep ? My Device did not wake up this morning, had to reboot via Power button pressed for 10 secs, and battery was drained form 90 to 20 ....
In debug log i have :
dmesg-Error:
<4>GPT: Use GNU Parted to correct GPT errors.
<6>EXT4-fs (mmcblk0p10): mounted filesystem with writeback data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
<3>PM: Device alarm failed to suspend: error -16
<6>sii9234_process_msc_work(): msc_req_locked error -2
<3>PM: Device power.0 failed to suspend noirq: error -11
<3>PM: Device alarm failed to suspend: error -16
<3>PM: Device alarm failed to suspend: error -16
----------------------------
dmesg-Warning:
<4>WARNING: CPU: 1 PID: 1 at fs/sysfs/dir.c:526 sysfs_add_one+0x98/0xa8()
<3>Warning: unable to open an initial console.
<4>WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:2503 __alloc_pages_nodemask+0x290/0x6e0()
<11>fs_mgr: Warning: unknown flag spo_check
<11>fs_mgr: Warning: unknown flag spo_check
<11>fs_mgr: Warning: unknown flag spo_check
<6>warning: `cbd' uses 32-bit capabilities (legacy support in use)
----------------------------
dmesg-Fail:
<3>PM: Device alarm failed to suspend: error -16
<3>PM: Some devices failed to suspend, or early wake event detected
<3>PM: Device power.0 failed to suspend noirq: error -11
<3>PM: Some devices failed to power down
<3>PM: Device alarm failed to suspend: error -16
<3>PM: Some devices failed to suspend, or early wake event detected
<3>PM: Device alarm failed to suspend: error -16
<3>PM: Some devices failed to suspend, or early wake event detected
----------------------------
Click to expand...
Click to collapse
How fix this freezing ?
pheonix1 said:
Hello everyone. I have install NeatRom 5.3.1 and Dorimanx 8.43. How fix freezing phone in deep sleep ? My Device did not wake up this morning, had to reboot via Power button pressed for 10 secs, and battery was drained form 90 to 20 ....
In debug log i have :
How fix this freezing ?
Click to expand...
Click to collapse
wipe cache/dalvik reflash neatrom - had to do this on my wifes phone the other night because she was having issues with the stock dialer - her phone is fine now - oh wait, come to think of it I have left her on philz kernel that comes with neat.
Failing that GS2RomNuke @hawkerpaul and start again.
Hope this helps
Jimsilver73 said:
wipe cache/dalvik reflash neatrom - had to do this on my wifes phone the other night because she was having issues with the stock dialer - her phone is fine now - oh wait, come to think of it I have left her on philz kernel that comes with neat.
Failing that GS2RomNuke @hawkerpaul and start again.
Hope this helps
Click to expand...
Click to collapse
Hello. I reinstall rom with kernel 3 times (first in recovery: wipe data, wipe cache, wipe dalvik) and nothing. If anybody don't help i try kernel apollo. I dont use philz kernel because they do not have bln....
Waiting for help.....
pheonix1 said:
Hello. I reinstall rom with kernel 3 times (first in recovery: wipe data, wipe cache, wipe dalvik) and nothing. If anybody don't help i try kernel apollo. I dont use philz kernel because they do not have bln....
Waiting for help.....
Click to expand...
Click to collapse
Did you try gs2romnuke yet? @hawkerpaul also has a very good kernel wipe, much better than just wiping manually from recovery. You could also try formatting data/cache and dalvik in advanced settings in cwm.
Ok i try this script. Choose nuke?
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
pheonix1 said:
Ok i try this script. Choose nuke?
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
Click to expand...
Click to collapse
yes - from @hawkerpauls thread :good::good::good:
Hi everyone, i've just saw this notification (i can't link it idkw) on my phone earlier it pops out quickly and gone so i've gone to the notification log and it seems way to shady ! anyone have a clue what it does ? it goes like that
Notification log
Attackers on <13>%1Sse/b> might att...10:24 AM
Google Play Store pkg: com.android.vending
key: Olcom.android.vending1-1050172287Inu11110066
icon: Icon(typ=RESOURCE
pkg=com.android.vending id=0x01080081)
sound: none
vibrate: none
visibility: PRIVATE
priority: LOW
intent: Intent(pkg=com.android.vending (activity))
extras android.title: Attackers on <b>%1$s</b> might attempt to install dangerous software on your device that steal or de... android. subText: null android. showChronometer: false android.text: Updating "Attackers on <b>%1$s</ b> might attempt to install dangerous software on your device that s... android.progress: 0 android.progressMax: 0 android.showWhen: true android.largeIcon: null android.infoText: null android.originatingUserId: 0 android.progressIndeterminate: false android. remotelnputHistory: null parcel size: 2260 ashmem: 0
I also saw this in my notification and it looked like a file was being downloaded. I couldn't find a downloaded file nor any trace of this notification. If anybody knows about this, kindly help us around here.
Had the same notification. Came for few seconds and went away. It started to download "Facebook" application on play store even when I already had it installed. I am worried now.
I am on Xiaomi.eu rom (device: mido), Stormguard kernel with Magisk canary build
Did u have any of these installed?
Hello,
I am hacking a GPS device on Android 4.4. I install my apk in priv-app, consequently I have full access to the device.
My problem is that I can't debug the device from Android Studio, every time I want to test my app, I flash the firmware.
I am trying to access the device directly from AndroidStudio, I activate 3 settings :
Settings.Secure.putInt(caniGPSApplication.getapplicationContext().getContentResolver(), Settings.Global.ADB_ENABLED, 1);
Settings.Secure.putInt(caniGPSApplication.getapplicationContext().getContentResolver(), Settings.Global.DEVELOPMENT_SETTINGS_ENABLED, 1);
Settings.Secure.putInt(caniGPSApplication.getapplicationContext().getContentResolver(), Settings.Global.INSTALL_NON_MARKET_APPS, 1);
Click to expand...
Click to collapse
The first settings "ADB_ENABLED" allowed me to see the device in AndroidStudio but I can't install the app from AndroidStudio or attach the process (no process is found). When I try to execute/install the apk I have this error :
12/11 18:32:23: Launching 'app' on sgtc G4E.
Installation did not succeed.
The application could not be installed.
List of apks:
[0] 'MYAPK.apk'
Installation failed due to: 'Unknown failure: pkg: /data/local/tmp/MYAPK.apk
Killed'
Click to expand...
Click to collapse
Have you some ideas ? Maybe there is an other setting I have to activate ?
I am thinking about something like "Install via USB" option but I did not found how to set it.
Thank you