I"m not sure what to make of this case for the transformer. Does not have that many picture to show how well it fits and covers the transformer without the dock or with the dock. Does anybody have this product?
http://www.amazon.com/Poetic-Ultra-...J6/ref=sr_1_16?ie=UTF8&qid=1314846049&sr=8-16
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
narikki said:
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
Click to expand...
Click to collapse
It's available now for 25 $ at Amazon. I am ordering one tonight.
manaskb said:
It's available now for 25 $ at Amazon. I am ordering one tonight.
Click to expand...
Click to collapse
when you get it can you post some pictures up of how it looks with the dock without the dock fully closed thank you
I pre-ordered one last month and it shipped friday. Should have it this week. I'll post some pics when it gets in.
According to tracking, mine should be arriving today. If so, I'll get some pictures up.
Pictures are attached.
sl0wd0wn said:
Pictures are attached.
Click to expand...
Click to collapse
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
What poor designing...they really need to make one of these but with something like hard silicon/TPU/Plastic, similar to the InCase products for Apple Macbooks. Those just snap on in two pieces to the exterier of the laptop and cover it nicely when its closed. This just looks like a bombardment of faux leather all over the place.
narikki said:
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
Click to expand...
Click to collapse
Received mine today. I can't send it back fast enough. It's fairly low quaility and does not fit well. The description says it is leather but I can't find any. Seems to be made of vinyl and fake suade. It was only $23 so I was not expecting much but the fit and quaility was poorer than I expected.
This looks like it could have promise for a similar pricepoint.
http://www.ebay.com/itm/Asus-Eee-Pa...?pt=US_Tablet_Accessories&hash=item3f0d4f8fa5
It's a shame that the Poetic case turned out to be such a disappointment.
I'm surprised, because I just got this Poetic case on eBay:
http://www.ebay.com/itm/280719327360?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
and it's great. It arrived in about 4 days from California.
It's a sturdy case that holds the Transformer using corner/side clips only,
which leaves all the ports easily accessible. It appears to be made of leather, or
at least a good quality plastic simulation. The case closes with a curved metal clip
which seems well-padded and doesn't damage the tablet.
The case has three positions. I use the highest for watching movies and the lowest for anything
that requires lots of typing. The front of the case folds completely flat behind the back,
and you can even dock the tablet, although the case isn't intended to hold the dock.
The best part: Even though the pictures don't show it, the flap connecting
the front and back has an opening for the dock/charging connector.
I can charge the tablet without removing (or even opening) the case!!!
I e-mailed the vendor and they assured me that the dock/charging connector
opening is standard and offered a refund if anyone gets one without it.
I've tried a bunch of cases - separate sleeves for the tablet, a "dual" sleeve with separate
pockets for the tablet and dock, etc., but this is the one I'm staying with.
If anyone is interested, I got the Diamond design one
Pics: http://imgur.com/a/ZXR7c
I just got mine! I actually paid 26something USD to ship it to The Netherlands (why are these rates so ridiculously high!?)...
In the end, it works fine for me. It fits my tablet, I don't have to take it off to attach the keyboard dock and it also closes with tablet + dock inside. Details are fine, fit is reasonably good (it seems to be a bit off at the front facing cam).
$24 makes a good buy.. at 50 (including shipping), I feel a bit dissapointed.
Then again;
to protect my phone, I bought www.pielframa.com last year they don't sell Asus eee cases (yet??). Cost me quite a bit. Great finishing, real craftsmenship! When I dropped the phone, the leather ripped and bit by bit fell of the casing. Now, there's a leather-less patch (about 1 cm) doesn't really bother me, but it made me wonder how much a phone case should actually cost.. knowing you're not that carefull and might drop it anyway
Related
Has anyone found any decent cases or sleeves for this tablet yet?
It's dimensions are listed as 271x176x12.9mm, which makes it longer than the iPad, as well as longer and wider than the Xoom, so I imagine most cases for those devices will be too small (or it'll protrude through the opening.)
At the same time, lots of netbook cases are around, but they seem to extend by 1 or 2cm too far in each dimension. Closest appears to be the Belkin 10.2" cases on Amazon.
There's a comparison of sizes here:
http://www.sizeasy.com/page/size_co...om-vs-Samsung-Galaxy-Tab-10-1v-vs-Apple-iPad2
http://www.proporta.com/F02/PPF02P05.php?t_id=5653&t_mode=des
Looks like it might work - size wise it seems the transformer will fit.
For the moment I am going to keep my transformer in the case I used for my Asus EEE PC Netbook, just hope it fits!!!
I also contacted tuff luv as I adore their cases and have one for my Kindle and love the fact I can prop it up and read it. They say there going to look into it and to contact them again in a couple of weeks, I really hope they do a case.
I got on of these as a temporary measure. .
http://www.amazon.co.uk/AmazonBasic...1_6?s=computers&ie=UTF8&qid=1302631132&sr=1-6
Fits well enough, of somewhat unspectacular..
REALLY hoping Yoobao do a transformer version of their magic case.. have emailed them to enquire.. mebbe i enough of us register our interest.. Hint.. hint
I still haven't found a case :'( I'm using a net book neoprene case which is too big, do we need to consider the keyboard as well... might make it harder to get the case.
Sent from my Transformer TF101 using Tapatalk
Ive got one of these and it fits pretty well.
http://www.argos.co.uk/static/Product/partNumber/9295706.htm
I got one of these anticipating my Transformer but after getting it, I'm pretty sure it will be about .5 inch short.
www .amazon.com/AmazonBasics-Netbook-Handle-10-Inch-Netbooks/dp/B002VPE1Q6/ref=sr_1_1?ie=UTF8&qid=1302649243&sr=8-1
The Transformer is long and narrow unlike all other tablets.
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
andyfoster said:
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
Click to expand...
Click to collapse
Looks like this one on Amazon?
http://www.amazon.co.uk/A1CS-tablet...66/ref=sr_1_24?ie=UTF8&qid=1302711288&sr=8-24
Edit: blah, ignore - just noticed that's for 7" tablets.
steftymo said:
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
Click to expand...
Click to collapse
Wow, those look really nice. I'll email and see what they say.
Edit: Have just been emailing with the lady that makes them. She's confident she can make something up for it and is going to send me a sample. I'll keep you posted!
case
I just bit the bullet and ordered this one for now:
www.amazon.co.uk/exec/obidos/ASIN/B0045D88I4/ref=ox_ya_os_product
Size is 270x200x25 mm which is the closest I could get to the Transformer size. It should arrive in a couple of days and then I will report back.
rio
This looks like a perfect fit from the listed dimensions:
http://www.gearzap.com/pakuma-eco2bag-cocoon-10-netbook-sleeve-black-and-jasper-red.html
Anyone know the height of the keyboard? Don't want to buy a sleeve yet until I know both the tablet & keyboard are going to fit in it!
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
leeharo said:
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
Click to expand...
Click to collapse
maybe im not sure. but isnt the transformer 16:10? its pretty widescreen so itll be a little lengthy compared to netbooks i think. im not quite sure.
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
bobcatuk said:
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
Click to expand...
Click to collapse
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
My sample "Wrapper", as linked above, arrived this morning and it's very nice indeed! Perhaps a little small width ways but I've sent my feedback and I think they're going to re-work it a little. Once they've got the final design down-tap I'd recommend them without hesitation.
Noiz said:
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
Click to expand...
Click to collapse
I guess i can see what you mean about the zip, but im traveling around with work next week and wanted something quick to stop it getting battered in my laptop bag with everything else that is in there.
It will do for the moment until either an official case comes out or a good alternative is found, I will hold onto the receipt and packaging that came with it, if it turns on the power constantly when im away next week i will take it back.
The TeckNet iPad Leather Case for Apple iPad is exactly the type of thing I want, only designed for the eeePad!!!
I'd link you to the page on Amazon, but I've not posted enough on here yet to put up external links! (GRRR!)
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Wow nice find.
Not sure if it's the same kind of case, but I just found
http://www.bestbuy.com/site/M-Edge+...218402861274&skuId=3441552&st=nook&cp=1&lp=15
while I was looking for a case of my own. Since the Amazon one is out of stock, it seems like an alternative.
DssTrainer said:
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Click to expand...
Click to collapse
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
tmlee51 said:
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
Click to expand...
Click to collapse
Looking at the pics, it looks like the NT would snap into it at the four corners rather than any edges. The NT's mic is a small hole at the top of the device, offset from the center. I doubt this case would block it.
[Edit]
Sorry, I should check the reply more closely before posting. I was looking at the one from Best Buy.
This is the one I picked up. It's pretty nice, a couple of different angles to stand the NT up, and it surrounds the whole thing, so it's pretty secure.
edit: I'm not allowed to post links yet, but search on amazon for crazy on digital's folio case for the Nook Color
This may seem like a dumb question, but can you stand it up in portrait mode with this case?
@DssTrainer Has it came in yet? What do you think of it?
r2tbone said:
@DssTrainer Has it came in yet? What do you think of it?
Click to expand...
Click to collapse
Im also interested what you think of it. I was thinking about buying the official barns and noble leather writers case but this onle looks decent for the price.
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
I had this one for the nook color, and I loved it.
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Comando156 said:
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Click to expand...
Click to collapse
I look forward to the reviews. I don't even know what type of case I want. It will be nice to see comparisons.
i have the nook color version from this same company and i love it...it looks very nice and very comfortable and has at least 4 viewing angles but only in landscape mode.no portrait mode viewing.
JAVOedge Austin Back Flip Case for the Barnes & Noble Nook Color / Nook Tablet - Latest Generation (Gray)
(I'm new to XDA and I did not permitt to post links... )
This one looks great but expensive. $34.99 . Hope I can find one better... $34.99...
Cloudsnightmare said:
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
Just ordered this one, great price hopefully its great quality.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
ordered this before I even saw your post.
Got it, hate it. No way to really fold the cover back and use it in portrait mode. Cover doesn't close flush with the nook.
Really nice quality leather.
If you case closes flush with the nook then I might be wiling to get a replacement and see if this one is defective but I don't think the magnets are strong enough/the groves to hold it in portrait prevent it from closing flush.
Just got the Speck Fitfolio in black. It fits very well and does not make it feel bulky at all. They have also extended the "vegan leather" on the back over the hard shell making it look far nicer.
Ok I purchased this case. Like the feel of it and its not too bulky. BUT, whatever chemicle they used to coat the leather absorbed into the bezel of my nooks rubber paint coating and caused a brown spotted discoloring.... I tried to clean it with alcohol and other cleaning products but its absorbed in the coating ... im pretty pissed to be honest. I just orders a skinomi woodgrain skin to cover the damage up, and plan on taking pictures and contacting the case manufactor to have them buy me a new nook! WARNING TO ALL!
I purchased this case
http://www.amazon.com/dp/B005MZ35NM/..._am_us?ie=UTF8
I've had it for about 3 weeks but haven't used it due to a very
strong chemical smell. The smell transferred to my hands after unpacking the case.
I've been waiting for the smell to go away before using it but after reading posts regarding damage the Nook finish I may never use it.
At the time I purchased my Nook I also picked up a B&N case that was discounted 30%. It's much better quality, I really like clips that hold it in place. Very quick and easy to pop the Nook in and out. The B&N case was approximately $10 higher cost but I feel it's higher quality case and worth the cost difference.
I received my MiniSuit Portfolio on Saturday.. It is a very nice case, very well made. Yes - it adds bulk but if you can't tell that when you ordered it then you didn't look at the pictures . It's a tri fold so of course it will add bulk, plus the leather. It is obviously very functional, and the side that holds a business card can probably hold a few pieces of paper but otherwise too much or it will just get entirely too fat..
OK, so the obvious things aside..... Here come the constructive criticisms. I'm a little concerned with the fit. The leather covers the bezel so when you dock it, it is really, really really tight.. I wonder if it puts "stress" on the fit of the dock and tablet.. The part that holds the dock snaps on.. It has little strap on the top corners, and when you add those it added and even tighter fit.. If you leave them off, and the dock slides down quite a bit when you are using it.
After only one day's use, the parts of the leather that go between the tablets and dock are pretty scuffed up.
Since the dock snaps off, I thought I'd be able to use the case for just the tablets if I didn't have the dock. Well I CAN, but the magnetic closer is part of the tri-fold that is on the dock portion, and so unless you have that part (even if it's empty), then the cover is very "flappy" (which is OK, so just fyi).
In all fairness, I am calling MiniSuit tomorrow. I need to get ask about another part of my order anyway (a different case, different purpose). This portfolio case is also ever so slightly "off" center enough that the camera is partially covered up (yes I've tried moving it several times but it still settles into the same place) I don't think that is normal, my friend's case is aligned perfectly.. So maybe this one is just a little warped overall.
I'm definitely giving MiniSuit benefit of doubt here, I am sure they will replace this one anyway since he camera hole is off center. Perhaps they can explain the width of the the leather between the tablets and dock. It's late and I can't remember ever seeing a "spec" for that. All I know is that it is really small.
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
slugbug2010 said:
I received my MiniSuit Portfolio on Saturday..
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
Click to expand...
Click to collapse
I'm looking forward to the pics! Thanks!
I just installed one of these covers on my wife's Prime and the camera on the rear is way off to one side also. And there are a few blems and over glues on the cover. I am not happy with this product. Let us know what you find out. I bought mine through Amazon so I am not sure what is my next step.........Thanks......
Ok, I talked to them and they were really great. They are sending me a replacement (and a prepaid label to return the one I have). They offered me a choice of replace or partial refund but I want to try a replacement. I told them I had photos of the camera port and the way the pictures came out and they very nicely asked if I wouldn't mind sending those in and thanked me in email for doing so.
I didn't not ask them about the leather being a bit thick (for my liking) or it getting scuffed already. I've read the reviews on Amazon and I don't really see anyone else mentioning this or thinking it's a problem. I'm hoping some folks on here get theirs in so we can see if there is a "space" difference between the og and Prime and maybe that is why it's not mentioned?
I think that is going to have to be a judgement call on my part. Dangit - if they had just made the bottom part hold the tablet with nice straps it would be fine, but the fact that it scuffed leather after one day ... seems to me like it is too tight. On the other hand......my friend looked at it, said he thought it looked fine and that it was leather - it would "break in" and flex. If I thought I would ALWAYS have the dock with it, I might be tempted to cut the dang leather off the bottom, but you can't really do that or the tablet will fall out with the dock gone. If I keep it, I might end up rigging it after a while anyway
Like I said - it's a nice case, very functional, it does add bulk, but anything we get that carries both will do that.
Ok...pictures. I used a toothpick for reference, you all have one of those and can tell for yourselves how far on will go in the small space between tablet and dock
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
duclet said:
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
Click to expand...
Click to collapse
Same here - they shipped it out and I have a tracking number the same day I called.
I didn't think they wanted the defective one back either, but in their email they wrote " A prepaid label will be included with your shipment for the defect". So.....I guess they want it back. Which is fine of course. I'm just not sure what they will do with it cuz I really don't think they are going to use it to make any changes or anything.
Well, I got my replacement. They did not end up sending a pre-paid return label so they don't want the defective one back apparently.
However the new one is worse than the first one as far as the camera port hole goes. It is obviously cut VERY wrong. So now both have been off very far towards the flash, covering parts of the camera lens. I realize i wont be using my camera very often, but I have noticed that it's rarely "planned" when I DO want to use the camera.
I also still have a big concern about the leather being so think between the dock and tablet. If everything else were perfect, I would likely rig it. I'd probably just cut it off. This would really only present a problem if you were to have the tablet without the dock because the tablet could slip out of the case with the having that section secured, but I'd just not use that case without the dock then (I have several other cases)
This is the perfect case for the combo, but it is flawed
Funny thing is - I received my other Minisuite case and LOVE it!! The ports and camera holes are perfect. It's the 360 degree rotating one (does not accommodate dock). I think, obviously, all these cases that look the same are made by some company in China, and then stamped by companies here. But for some reason the template they used for the nice leather keyboard/tablet combo is just not right.
Pretty much my experience, I do not believe they had an actual Prime in hand when they designed this case. Not pleased overall and waiting for better options.
If you have or found a good case, post it here.
I bought the official case from TMO. It's a little pricey but provides excellent protection. As a matter of fact, the faucet in my bathroom leaks and I left my tablet on the counter one night. I woke the next morning and my tablet was sitting in a puddle of water that extended halfway up the case. Took the case off, wiped everything down, and plugged it back in. Worked fine. Even the liquid indicator was still white.
hiko36 said:
I bought the official case from TMO. It's a little pricey but provides excellent protection. As a matter of fact, the faucet in my bathroom leaks and I left my tablet on the counter one night. I woke the next morning and my tablet was sitting in a puddle of water that extended halfway up the case. Took the case off, wiped everything down, and plugged it back in. Worked fine. Even the liquid indicator was still white.
Click to expand...
Click to collapse
Ditto on the TMO case.. seems $20 too high, but honestly a pretty good hunk of hardware for your tablet. I will have one spare once I have my tablet mounted into my car dash..
Raichean said:
Ditto on the TMO case.. seems $20 too high, but honestly a pretty good hunk of hardware for your tablet. I will have one spare once I have my tablet mounted into my car dash..
Click to expand...
Click to collapse
Another vote for the TMo case and you are right about the price but you can buy it off Ebay for about $20 less unless you are like me and want it right now.
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Klacik said:
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Click to expand...
Click to collapse
The brand is Incipio and I purchased mine from a TMo store for like $50. I had seen the same one on Ebay for half the price but I didn't want to wait. I checked Ebay and the case is no longer listed. I also looked on the Incipio web site and they don't even list it. I don't have a picture but the case is black and the tablet kind of snaps down into the bottom part of the case. You can open the case(it is held closed with an elastic strap) and you have three positions that the tablet can be set into. They range from a fairly good tilt to darn near upright. I have found the case to be quite nice and it really doesn't add much to the overall size. Hope this helps.
Klacik said:
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Click to expand...
Click to collapse
h ttp://img834.imageshack.us/slideshow/webplayer.php?id=img4704b.jpg
Pictures attached.
On the second picture, you can see bubbles in the microfiber. That's the glue separating because I got it wet.
I bought on ebay a smart cover like this from the auction 170821966479. It's thin, good protection and a good stand. I am very happy with it.
The TMO case is so popular in the US, but outside there are two options: universal 7 inch case or a not so bad case designed for the media pad. Search for t-mobile springboard case on ebay.
I bought a cheap-o case off eBay for $16. Listing was questionable as the sellers account was terminated the day after I bought it. I still got the case this morning after 3 weeks though. 2 problems with it. It's a little too thing for the springboard, so the outside edge around the display doesn't quit fold over all the way and sticks up. Secondly, the hole for the front facing camera is slightly off and the camera just barely peeks out from it.
Might not stick with the case though. Without the case I've always been able to stick it in my back pocket (slacks or jeans) and walk around with it to a few places, lunch breaks, dog walks, etc. With the case its a no go.
PDair Leather Case
lilaliend said:
I bought a cheap-o case off eBay for $16. Listing was questionable as the sellers account was terminated the day after I bought it. I still got the case this morning after 3 weeks though. 2 problems with it. It's a little too thing for the springboard, so the outside edge around the display doesn't quit fold over all the way and sticks up. Secondly, the hole for the front facing camera is slightly off and the camera just barely peeks out from it.
Click to expand...
Click to collapse
Yes, I have also found this one on eBay. I have ordered it (the same colour like lilaliend). But it never arrived (I got my money back). Fortunatelly!!
After the first attempt with eBay, I have decided to invest a bit more money and ordered a leather case from PDair:
qqq.pdair.com/index.php/ebook-reader-tablet/huawei/huawei-mediapad/leather-case-for-huawei-mediapad-book-type-black.htmk
(in the URL please replace qqq with www and htmk with html)
You can buy it directly from PDair for $80. This is quite a lot of money. But PDair's reseller for Middle East sells the same case ("book type") for $60:
tbeyond.com/leather-case-for-huawei-mediapad-book-type-black-p-14363.htmk
(in the URL please replace htmk with html)
Free Worldwide Shipping. Even though the reseller is based in United Arab Emirates, the case came from Hong Kong. Delivery to Germany was without any problems.
My experience with the case from PDair: The case is simply excellent. I highly recommend it. It is worth the money:
PROS:
- durable black leather
- magnets! It closes with magnets
- the tablet fits nicely into the case (in contrast to the cheap case from eBay - see post from lilaliend)
- all holes (front and rear cameras, USB and HDMI ports, charger) are precisely where they should be
CONS:
- the case is rather thick. They use multiple layers of leather (you can see it on the pictures on the PDair website). So the tablet is really well protected. But with the case you can not put the tablet into your back pocket...
TMobile Incipio case for Springboard has dropped in price
If you were to shop for it now on the TMobile site the Incipio case is now $29. That's about $15 to maybe $20 cheaper than when I bought it earlier in the year. ARGH!
I do love my case though. The only thing that's bad is when you are in portrait mode and the front cover doesn't sit nicely back when holding it in that position.
Marware Jurni
I wanted a case that had a zippered closure, for added protection. I had this case from when I had purchased the Kindle Fire. But I decided to see if it would fit the Springpad. It does, with a bit of sanding or cutting.
This is an option if you are willing to sand down or cut two nibs from the top two clips. Each clip has two nibs, the one you want to sand down or cut is the one on the right for each clip. I have attached some pictures so you can see the zippered case and the two clips above, and a close up of the cut. Mine is a bit sloppy, but hey, I'm not complaining. See pictures.
ting-er said:
I bought on ebay a smart cover like this from the auction 170821966479. It's thin, good protection and a good stand. I am very happy with it.
Click to expand...
Click to collapse
I also looking for this case.. anyone know where can i get it that shipped internationally...
The incipio one is also looks nice.. but i couldnt found one in ebay
Sent from my GT-I9300 using Tapatalk 2
Great... I am happy with my incipio but I got this off ebay because it would be nice to prop it in portrait mode. I guess I could report how well it does when it comes.
http://www.ebay.com/itm/Brown-Magic...7-SLIM-MediaPad-SPRINGBOARD?item=270998785548
this is my combo "temporary" case and universal stand. :laugh:
still looking for a folio-type case and I just got news that the local distributor here already has stocks and giving it for free for new buyers of MediaPad. :silly:
I wanted a case that protects the corners, could prop up the MediaPad in landscape and (!) did not cover the front (like some cases that cover the bezel around the display).
Turns out that this case for the Lenovo Ideapad A1 fits just fine. Only the hole for the camera is in the wrong place, but I don't use the Pad's camera anyway. Nice sleek design. Reeks of plastic/glue the first few days, but the smell wears off quickly and then you have a smart-looking case for your MediaPad.
Apparently this case comes with different names around the globe. Have a look at the pictures and see what's available in your country.
Hi
I'm using the EasyAcc Case for nearly a year now.
It fits great, exept the hole for the frontcamera could be a milimeter bigger.
I do not know, in it is available outside Germany.
Greets
Torstiko
Sent from my Huawei MediaPad using xda app-developers app
Hey guys,
If anybody is looking for cases, I'm using this one.
http://www.amazon.com/MoKo-Folding-...1SCQ/ref=sr_1_2?ie=UTF8&qid=1337432342&sr=8-2
I like it a lot. It's very sturdy, strong build and the price is not bad at all. i would recommend it. Reviews are pretty good on it as well.. I'm not a big fan of folding cases but this one changed my mind. It's not those flimsy cheap ones they sell on ebay for $5. I had one of those for my tab 7.0 plus and it was garbage.
Ordered this same case over the weekend and am awaiting delivery. I do have the keyboard dock but see this as an excellent alternative for some situations. It's called a Transformer for a reason after all.
Sent from my Galaxy Nexus using Tapatalk 2
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
+ Very affordable
+ Sturdy
+ Proper screen protection
+ Fast delivery
+ Simple, yet stylish finish (leather-look, black)
But....
- I had to "adjust" the hole for the headphone. Originally it was placed 7 mm too low (when holding the tablet upright). But with a sharp knife, that is easily done.
- The cover is (when folded) hold in place by a small flap. I find that the friction is too low to properly keep the cover in place. So I improved it with some velcro. Now the cover stays were it is no matter how mucht I move the case around. Just make sure you place the soft side of the velcro on the cover (doesn't scratch the screen)
- It adds about half of the tablet in weight, which is no problem when its standing/laying on a surface of course. But just to let you know
-The 40 pin connector is at all times unprotected
- I am also thinkin of clearing some of the material around the on/off switch. I find it a bit too hard to reach (I am a lazy SoB, mind you )
- I will add a small loop for a stylus (not present)
I admit I am still waiting for the smart cover version like the one for the TF201. But until that moment, this one is it.
Cheers
I purchased this case and received it today. I really like it and it was a great deal. It's probably tthe best one for the money right now. Very well-made and fits perfectly. I especially like now the screen cover adjusts depending on the way you want to use the wedge stand and the magnets in said cover to keep it closed.
All-in-all, I highly recommend it to anybody who is looking for a case and is not going to be using the keyboard dock.
WOEHAA said:
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
Click to expand...
Click to collapse
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
jpc0480 said:
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
Click to expand...
Click to collapse
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
smallblock said:
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
Click to expand...
Click to collapse
Thanks for the link!
How do you like it?
***EDIT
I went ahead and purchased it anyway! Will be here on Monday!
I think it's great !!
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
smallblock said:
I think it's great !!
Click to expand...
Click to collapse
Yeah just got mine today! Fits nicely!
Didn't have to mod mine either!
Sent from my ASUS Transformer Pad TF300T using XDA
Is the extra cost of the Caseen skinny cases worth it over the moko?
tuffluck said:
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
Click to expand...
Click to collapse
If you are talking about the Moko one?
1. No, No damage possible. I had it for a month or so and havent seen damage on screen. I wonder this to, but it doesnt touch the screen. Atleat for me it doesn't.
2. I didn't have to. I used the headphones with no problem. No carving..
3. I can send a picture of the velcro but it's pretty strong. The tablet doesn't move down or tries to walk away from the case.
Mine is supposed to arrive tomorrow (Friday). Can't believe the overwhelming positive feedback from so many other users who have this case.
I've ordered mine by UK
"MoKo(TM) Folding Cover Case with Stand for Asus Eee Pad Transformer 10.1-Inch Android Tablet (TF300 Sleeve), Black"
Items: GBP 11.99
Postage & Packing: GBP 5.15
------
Order Total: GBP 17.14
Payment Total: EUR 22,03**
Delivery estimate: 15 Jun 2012 - 16 Jun 2012
Click to expand...
Click to collapse
It's a delivery estimate, but generally the dispatches from UK are very quick.
I have the moko case for the tablet and its great. The reason the screen doesn't get scratched is because of 2 magnets that are sitting on each corner on the far end of the case and when the case is closed there is still about a centimeter or 2 of clearance. Great case imo
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Does the magnets affect the tablet?
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Drop-EX said:
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Click to expand...
Click to collapse
No it's not. I take it out all the time. I personally don't like cases, but I had one because of my daughter.
rnagam1 said:
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Click to expand...
Click to collapse
I saw that. I'll give it a try today. I don't use my tablet for gps so that doesnt bothered me.
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BL
I got this one the other day and am really liking it so far. If you are looking for a case that lets you stand the pad up in portrait and landscape this is a great buy!
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BLACK (with Vertical and Horizontal Stand, Elastic Hand Strap, and Stylus Loop)
http://www.amazon.com/MoKo-Rotating...9?s=electronics&ie=UTF8&qid=1339688594&sr=1-9