Okay, so I am attempting to flash back to stock, or anything that WORKS at this point.
I can get my phone into download mode and I connect it to my computer, but I get a rather annoying bubble that says "USB Device not recognized... one of the USB devices connected to this computer has malfunctioned and Windows does not recognize it."
I goto device manager and check my USB devices and it is listed as "Unknown Device" I look at it's properties and see "Windows has stopped this device because it has reported problems. (Code 43)"
So, I check the driver details.
It says "No drivers are required or have been loaded for this device"
So I goto update drivers, browse to where I keep them and see "Windows has determined the drivers for this device are up to date."
I have reinstalled all my drivers using various methods. I have tried new USB cables and all of my USB ports.
No matter what I do ODIN won't see my phone. Nothing shows up under any of the usual COMs
PLEASE HELP! WHAT SHOULD I DO?! D':
Xionace said:
Okay, so I am attempting to flash back to stock, or anything that WORKS at this point.
I can get my phone into download mode and I connect it to my computer, but I get a rather annoying bubble that says "USB Device not recognized... one of the USB devices connected to this computer has malfunctioned and Windows does not recognize it."
I goto device manager and check my USB devices and it is listed as "Unknown Device" I look at it's properties and see "Windows has stopped this device because it has reported problems. (Code 43)"
So, I check the driver details.
It says "No drivers are required or have been loaded for this device"
So I goto update drivers, browse to where I keep them and see "Windows has determined the drivers for this device are up to date."
I have reinstalled all my drivers using various methods. I have tried new USB cables and all of my USB ports.
No matter what I do ODIN won't see my phone. Nothing shows up under any of the usual COMs
PLEASE HELP! WHAT SHOULD I DO?! D':
Click to expand...
Click to collapse
If you're running anything Gingerbread, you need to download and install the Nexus S Drivers to get your pc to recognize your phone in dl mode.
Didn't work. Could you link me to the the drivers?
I got mine from androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/
I GOT IT!
Upon taking a closer look at things.... literally. I found a very small piece of what appeared to be pocket lint lodged in my phone's port. Pulled it out and immediately regained functionality! SO, words of wisdom from hours of frustration "Look in the hole"
Xionace said:
Didn't work. Could you link me to the the drivers?
I got mine from androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/
Click to expand...
Click to collapse
Those are probably the right ones, however I got mine directly from the drivers folder in thr Android sdk gingerbread update. Are you getting an error when you try to install the drivers you downloaded?
Sent from my ZenDroid, meditating on the XDA App
I GOT IT!
Upon taking a closer look at things.... literally. I found a very small piece of what appeared to be pocket lint lodged in my phone's port. Pulled it out and immediately regained functionality! SO, words of wisdom from hours of frustration "Look in the hole"
Thanks for the help though!
Just download the drivers. click usb debugging. it should pop up.
Related
So I switched to the energy miui yesterday and it worked for like 20 minutes then wouldn't boot up anymore. for hours I kept getting "usb device not recognized" error then out of nowhere I got it to work and started to use odin to flash back. Well during that time it failed and wouldn't start up for awhile but now I can get it into download mode again but my pc won't recognize my vibrant no matter what I do.
I run win 7 x64 with 2 different cables, 2 vibrants (the other vibrant has zero problems connecting and works every time with my pc) and I've tried different usb ports. I've taken the battery out re plugged the usb several times and even tried installing all my usb hubs and nothing.
What can I do to get my computer to recognize my vibrant so I can fix it?
Usually i get "usb device not recognized" message when some stupid reason samsung drivers stop working. What i do is uninstall them, reboot and then install them again. Give it a try, also make sure you're connected to usb port on back of the computer. You can also try heimdall if odin doesn't recognize your phone. Couple of time that has worked for me also.
Try installing Samsung Kies mini, it will automatically install the drivers so that your device can hopefully be recognized, if that does not work, well just use your other vibrant.
I gave that a try but I cannot seem to get heimdall to even work. I keep getting random errors each time. 3 different ones so far. Is there any other way I can do to force my computer to recognize it? And I have the keis but it hasn't helped either. It just tells me to connect.i don't think it is the drivers when my other vibrant connects just fine without problems
If you were in MIUI, you are a going to need the Nexus S drivers for Odin to recognize your phone. You can get them here:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK.
Click to expand...
Click to collapse
Hi, I have a problem connecting to Kies. I have been searching for hours over the internet for a solution but nothing worked.
Until yesterday I was connecting normally to Kies, syncing my mobile and checking for updates. Yesterday Kies gave me a message that there is a new update (for kies software), so I accepted the update and got the latest version (2.0.3.11082_152). Since I did that i couldnt connect my SGS2 to Kies again. It keeps on saying "connecting" on the screen but never ends and never show my SGS2 under "connected devices" .
I already have "debugging mode" unchecked. I used the option to update drivers several times. I tried to download Kies again at least 8 times (both the latest version as well as the original version I previously had), I tried unmounting my SD card, I tried several USB cables, but still getting "connecting" that stays forever.
BTW, I can connect to my PC in USB storage mode.
I have stock Android 2.3.3 with Kernel version JPKH1 (Arabic enabled).
I really appreciate any help from anyone.
I have read in many forums that I need to pick "Kies mode" by going to Settings>Wireless and network> USB settings. Well, on my phone when I go to Settings>Wireless and netwrok I dont have "USB settings" in the list but have "USB utilities" instead. Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
same prob
Anyone, PLEASE....
waelnd said:
Anyone, PLEASE....
Click to expand...
Click to collapse
I have read in many forums
suggest if these forums know so much ask them as you are not getting an instant reply .
Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
Off course thats what we all have your other forums are talking nonsense .
Suggestion turn phone OFF turn PC off reboot PC Reboot phone .
Start Kies connect Samsung USB cable .
Wait for Kies to connect .
jje
And make sure you run Kies as Administrator if you are running Win7
I used to have the same issue.
If you are using a 3rd party launcher, try turning that off and returning to touch wiz, as that caused issues for me, also make sure the phone is unlocked.
Failing that, turn the computer off, and plug the phone in, and then boot the computer back up, that might force it to install the drivers.
Same problem with me.i have win xp.but newer kies verson does not support sgs2.one another problem is i accidently uninstalled samsung usb driver for mobile phone.now i connect phone with pc via usb cable,the pc every time says fond new hardware and try to install it but could not sucseed.when i manually install driver,pc every time says "mobile phone has being used,eject the phone and reboot pc then install usb driver".where no phone is conected.why pc says eject phone where no phone is conected? Please help me please.
Sent from my GT-I9100 using XDA App
Saolved: Kies not connecting
Hi. To any who is faing this problem, here is the soultion that worked with me.
After trying everything, from rebooting PC and phone several times, using Kies "Resoultion Connection Eror" to download drivers many times, making sure the USB debugging is turned off from setting, etc,,,,, NOTHING WORKED
So:
1- I disconnected my phone from PC
2- I went to PC Control Panel>System and Maintenance>System>Device Manager
Under "USB Controllers" I didnt find anything with Samsung name. Instead, I found 2 entries under the name "USB Composite Device". Using right click I uninstalled them.
3- I reconnected my phone with Kies closed. As soon as I reconnected my phone, I had a message saying that Samsung Drivers are being added
4- I opened KIES, and Voila... my phone connected and I could see its name under Kies connected devices.
5- Now under Device Manager I can see "Samsung Mobile USB Composite Device"
My interpretation is that although I tried to update the Samsung drivers thru Kies many times, the drivers that already existed for the "USB Composite Device" (which I uninstalled in step 2) were forbidding Samsung drivers to take their place. So when I unistalled the USB Composite Devices everything worked the way ot should.
Hope this could help anyone who faces this problem.
Solved!!
Just go through the trouble shooting procedure which shows up on the screen when Kies is running and your device is not able to connect. It'll download some driver and automatically fix the issue.
Need a little help here. I cannot get my phone to connect to my computer, I'm running Windows 7. I have kies installed and have also downloaded the drivers directly from the Samsung site, but still cannot connect. When I plug in, it says installing drivers, but then gives me an error.
If I go to Device Manager, I see SAMSUNG Mobile MTP Device but with the yellow exclamation mark. Under driver details it shows the correct driver installed, but has a Code 10 Error. "The Device cannot be started".
I've rebooted comp, rebooted phone, toggled USB debugging, uninstalled and reinstalled drivers, tried 2 different USB cables, and nothing is working. Anyone have any ideas?
I didn't have to do everything you listed to get it to work, but I did have to run the installer (T-Mobile_T999_GSIII_Samsung_USB_Driver_v1_4_6_0.exe) twice to get it to work.. it failed the first time.
I just unplugged and then plugged cable back in, ran the installer and installed again over old drivers.
You can also try going into Device Manager, right-click on the phone and "Update Driver Software" manually... installer extracts all drivers to the C:\Program Files\SAMSUNG\USB Drivers folder.
Still no luck. It installs the Samsung USB modem drivers fine and shows the phone correctly, but fails on the MTP Driver section.
Just for future reference for anyone that comes across this while searching. I did get this fixed. I tried a couple more usb cables and a friends computer with the same issues.
What I ended up doing was a factory reset on the phone. Plugged phone in after first boot and mtp drivers installed right away.
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Apparently the drivers installed directly from phone are not enough. In any case, I was observing similar behaviour *until* I installed LG PC Suite (which you should have been prompted to do too). It's stupid, it sucks but again, it's LG.
Install the LG drivers first. After that, when you plug your phone, it will be recognised as an mtp device.
Have you got Windows Media Player installed?
hmskrecik said:
Apparently the drivers installed directly from phone are not enough. In any case, I was observing similar behaviour *until* I installed LG PC Suite (which you should have been prompted to do too). It's stupid, it sucks but again, it's LG.
Click to expand...
Click to collapse
I forgot to mention I installed LG PC Suite as well. Same problems.
Greenpeace22 said:
Install the LG drivers first. After that, when you plug your phone, it will be recognised as an mtp device.
Click to expand...
Click to collapse
I tried two different versions of the LG United Mobile Driver, versions 3.7.2 and 3.8.1 on my computer. Same problems.
artas182x said:
Have you got Windows Media Player installed?
Click to expand...
Click to collapse
I do. Same problems.
Plug the phone, go to device manager in windows and uninstall the driver for the phone( or whatever shows up with the yellow triangle). Then unplug the phone and connect it back again. It should work. If not, uninstall the lg drivers and clean every trace of them and start from the begining.
Greenpeace22 said:
Plug the phone, go to device manager in windows and uninstall the driver for the phone( or whatever shows up with the yellow triangle). Then unplug the phone and connect it back again. It should work. If not, uninstall the lg drivers and clean every trace of them and start from the begining.
Click to expand...
Click to collapse
Tried uninstalling the LG U2 USB Driver, then disconnected and reconnected phone. Same problem. LG U2 USB Driver was installed but MTP USB still shows up as unplugged.
Then uninstalled LG PC Suite and LG United Mobile Driver, reinstalled LG PC Suite and reconnected phone. Problem still occurs. I run LGAutoRun.exe and United Mobile Drivers are installed. Same problem. MTP USB shows up as "device unplugged" and phone keeps disconnecting and reconnecting to computer, saying drivers were not properly installed due to MTP USB being unplugged.
Interesting to note the phone is listed as a CD-ROM drive.
optimusl9 said:
Tried uninstalling the LG U2 USB Driver, then disconnected and reconnected phone. Same problem. LG U2 USB Driver was installed but MTP USB still shows up as unplugged.
Then uninstalled LG PC Suite and LG United Mobile Driver, reinstalled LG PC Suite and reconnected phone. Problem still occurs. I run LGAutoRun.exe and United Mobile Drivers are installed. Same problem. MTP USB shows up as "device unplugged" and phone keeps disconnecting and reconnecting to computer, saying drivers were not properly installed due to MTP USB being unplugged.
Interesting to note the phone is listed as a CD-ROM drive.
Click to expand...
Click to collapse
Install the software from the CD image. It will load the correct driver. After this re-connect the device and the CD image will show up for a few seconds and disappear. After this the storage will show up. That is how it worked on my device.
kevev said:
Install the software from the CD image. It will load the correct driver. After this re-connect the device and the CD image will show up for a few seconds and disappear. After this the storage will show up. That is how it worked on my device.
Click to expand...
Click to collapse
I have already tried what you said as I posted before. The LG United Mobile driver gets installed but the MTP USB Driver does not get installed due to the device being unplugged according to Windows, even though I have yet to disconnect the phone from the computer. The phone still says "Connected as an installer".
The phone is recognized as an F: Drive by Windows but LGE Mobile but keeps disconnecting and reconnecting every 20 seconds or so.
I am going to have to upload a video to YouTube to make things crystal clear.
optimusl9 said:
I have already tried what you said as I posted before. The LG United Mobile driver gets installed but the MTP USB Driver does not get installed due to the device being unplugged according to Windows, even though I have yet to disconnect the phone from the computer. The phone still says "Connected as an installer".
The phone is recognized as an F: Drive by Windows but LGE Mobile but keeps disconnecting and reconnecting every 20 seconds or so.
I am going to have to upload a video to YouTube to make things crystal clear.
Click to expand...
Click to collapse
Try a different USB port or cable. My P769 would not work on my USB 3 ports, but was happy on the USB 2 port. I had already installed the drivers and LG PC Suite and it picked up each mode just fine.
Plugging the phone into USB 2.0 makes the phone show up in portable devices, but LG Suite fails to identify the phone. I tried using both LGE Android Net MTP USB Device and MTP USB Device but they both fail. I have LG United Drivers and LG Suite installed already.
got thesame problem here mate..i search all over here and google the driver but still cant find any solution..this is so frustrating to fix this issue,,got install and uninstall the pc suite and driver many times but still cant get the solution..so what could be the fix????
no one can suggest..someone told me that maybe its causing the broken data cable but i have 3 cables now..
everytime i intend to install the MTP driver thing my pc always failed to do so,,saying that the filename,directory name or syntax label is incorrect..but i manually direct the search to lg driver folder but same error occurs..or there still other alternative apps that can transfer files without removing my sd to my phone,or atleast transfer files over the wifi..??
Any fix for this one? Already tried uninstalling, installing LG drivers, removed and reinserted SD card and everything. But still to no avail. It installs everything successfully EXCEPT USB MTP device which is the one I needed the most. Any solutions? Thanks!
Futurust said:
Any fix for this one? Already tried uninstalling, installing LG drivers, removed and reinserted SD card and everything. But still to no avail. It installs everything successfully EXCEPT USB MTP device which is the one I needed the most. Any solutions? Thanks!
Click to expand...
Click to collapse
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
cmahendra said:
You must be on 64 bit windows. Not even on 64bit, Still try this...
1) Uninstall LG Drivers, LG PC Suite and anything you see named LG. Restart PC.
2) Install latest LG Driver from this post (step 4)
3) Install Optional MTP Driver from this post (step 4)
4) Open Windows Device Manager (just to watch whats happening.)
5) Disconnect Internet (To avoid stupid online WDM drivers)
6) Connect phone with Usb and let drivers install automatically. Give it some time to install drivers keeping watch on Device Manager window.
7) Keep changing USB connect modes to all modes one-by-one on Phone and let drivers install.
You should see MTP drivers installed now. If this does not help, cant think of anything else. If this works, press THANKS button
EDIT: Connect USB at backside of pc, directly to USB on pc motherboard.
Click to expand...
Click to collapse
Thanks for taking the time to answer me mate. Already tried literally everything on what you just said above. Still no. I tried it on my brother's old vista laptop. One connect and it worked instantly! Lol.
Sent from my LG-P768 using Tapatalk 2
optimusl9 said:
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Click to expand...
Click to collapse
This may help - credit goes to levicki where I found this article. I was having problems with my Garmin Satnav
I can't post urls as I am a newbie member, so google this phrase mtp usb device failed device unplugged
and look for this result - near the end of page 1 on my search
HOWTO: Fix MTP USB driver problem in Windows 7 - Tips - Levicki's ...
If you are running on windows xp you need to install windows media player 10 or later
Sent from my LG-P768 using xda app-developers app
tried this method, still no go, tried almost everything on the web, mtp drivers fail to install
running win7 x64
solved mt htc one mtp problem
fazq01 said:
This may help - credit goes to levicki where I found this article. I was having problems with my Garmin Satnav
I can't post urls as I am a newbie member, so google this phrase mtp usb device failed device unplugged
and look for this result - near the end of page 1 on my search
HOWTO: Fix MTP USB driver problem in Windows 7 - Tips - Levicki's ...
Click to expand...
Click to collapse
This one helped me to solve my problem ,, just deleted this file and tried it worked. C:\WINDOWS\INF\wpdmtp.inf
THANKS
optimusl9 said:
I plug my phone into a USB port.
The first time I did so, an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
The LG United Drivers are installed onto my computer great.
But then an AutoPlay window pops up prompting me to run LGAutoRun.exe. I click to do so.
My computer attempts to install MTP USB Driver, but fails. According to Windows, the device is unplugged.
The AutoPlay window reappears. Repeat from the beginning of the paragraph.
What have I done to deserve such trouble, LG?!?!
Click to expand...
Click to collapse
This works on XP x86
Need:
1. LG USB cable that came with the phone,
2. Media Player 10/11 preinstalled,
3. your LG Driver,
3. LG Phone,
4. and Media Transfer Protocol Porting Kit (mtppk12.exe)
1. with phone disconnected install Media Transfer Protocol Porting Kit
2. when asked to restart the PC, go ahead and restart
3. open device manager, connect phone to PC
4. install driver and watch LGE Android MTP disappear
5. be sure to toggle between Charge and MTP on the phone to install all drivers
this also works for HTC MTP
Hi,
After the most recent update (OTA), when I connect my phone to my PC, regardless of what mode I have the USB set for on the phone, I can no longer connect
to my phone.
It worked flawlessly before.
The Huawei HiSuite also cannot connect (although I don't norm ally use that anyway).
I have tried reinstalling ADB and also HiSuite to no avail.
One thing I do notice is that there was a HDB driver missing. When I rebooted my PC it has now changed to 'USB Composite device' but shows the error
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
{Bad Image}
%hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x
I've tried to automatically install a driver, again no joy. (Because the device is not recognised, it just says it could not a find a suitable driver).
If I uninstall the device and then plug my phone back in we then start with the HDB device (for which there is no driver according to MS), which upon reboot becomes the 'USB Composite device' again.
So, anyone know how I can fix this? I'd like access to my phone through my PC if possible.
TIA (Thanks in Advance)
I know it's obvious, but have you tried a different usb port.
UrbanBushman said:
I know it's obvious, but have you tried a different usb port.
Click to expand...
Click to collapse
Yes. Front and back of PC as well through a hub.
It makes a sound like it connects, then I get a popup on my phone "Charge only / Transfer files / Transfer photos" and regardless of which one I select, it then disconnects.
Somewhat annoying. It worked okay before latest update.
I've even reinstalled ADB, even though I'm fairly certain this has nothing to do with it.
Thanks for your reply anyway!
[Solved]
I managed to solve this by plugging in my Honor 9. On the device manager page in Windows take a look at the 'USB Composite Device' item and selecting with an exclamation mark against it and right click it and select"Uninstall device" from the menu. When it asks to remove the driver, select yes. Unplug your phone. Reboot your PC. Upon plugging your phone back in, your device will be re-detected and Windows will install the driver correctly.