[OTA UPDATE] 45.2.7.en.US - Motorola Photon 4G

No release notes yet hopefully they will come soon!
This will of course break root but that's easily fixed using either Torpedo method or One Click Root.
WARNING!!!
If you have the following setup please use caution. This update may halt during the process.
Phone Info: Alien Rom
Unlocked Bootloader
Rooted (using Photon Torpedo)
Thanks to: Nerorising for pointing this out

mdeezy said:
No release notes yet hopefully they will come soon!
Click to expand...
Click to collapse
yup switch .6 to 7........

Is it still rootable? Does dock method work? Dockless methods?
---------- Post added at 05:30 AM ---------- Previous post was at 05:20 AM ----------
Darn. Get same error I got when last OTA came around. Box comes up after phone restarts that says software update failed. I had to use the SBF that was released in the forum to get the last update. Any suggestions on how to fix this? I am rooted with the dock method and do not have bootstrap recovery installed although I did have it one time before I installed the last OTA by way of an SBF. I would do a factory reset and then try upgrading only if any of you think that will work unless there are any other suggestions.

I just used the one click dockless root after the update at it worked smoothly.

Argh. It is refusing to update just like the last OTA. Did more checking with holding down the volume up and down to get recovery into a more textish mode and I got some sort of a status 7 error on checking current system. Too many hex characters to copy down in that error but the update was talking about a file in my /cache folder refering to 45.2.5. So I cleared cache partition. No go. Can anyone advise on how to get this to update? I had the same problem with last month's OTA and I had to use the SBF which is currently not available. Any tips or help?

Torpedo
Is it still rootable? Does dock method work? Dockless methods?
I just rooted me an my girls Photon using Torpedo method

I downloaded the OTA and it restarted the phone like normal but then starts to flash and stops...just sits on the Android with the exclamation point screen. Been there for about thirty minutes. I'd advise caution if you have a similar setup as me.
Phone Info: Alien Rom
Unlocked Bootloader
Rooted (using Photon Torpedo)

Best advice, if you want the update, you probably have to sbf back to stock, do a master reset you will most likely be good. You need the stock recovery for the update to work me thinks.
-DJ

Then the question remains, what does this update do...and does it make it worth the trouble of going through all that?

Pretty sure someone said something about wireless connectivity.
I'm going to be flashing soon, will post how it goes.
-DJ

Cool. Sounds good.

Actually, you can just flash the stock recovery image from this post
http://forum.xda-developers.com/showthread.php?t=1216143
right under Pudding Remover.
There is a flashable stock recovery after all, I did not know this. I will do it, but my battery is too low. Going to jump in the shower and see how it goes afterwards.
EDIT: I find this to be very cool as I tried to flash it in fastboot mode and looking at the cmd prompt it said error 'cannot load stock recovery.smg'. I then look at my phone and it straight told me that my battery was too low. Pretty damn fool proof system. I like it!
-DJ

Hey just a heads up guys, if the only thing you did was root your photon, then your good to update, won't brick your phone, here's proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVO 3d using XDA App

And that relocks and unroots and all that ****? And nice. Mine is on the charger at the moment.

And i can confirm that manual rooting still works fine
Sent from my EVO 3D using XDA App

Sweet. Good info. Thanks Killa.

Djspinister said:
Best advice, if you want the update, you probably have to sbf back to stock, do a master reset you will most likely be good. You need the stock recovery for the update to work me thinks.
-DJ
Click to expand...
Click to collapse
When you say sbf back to stock, do you mean to reflash the file
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf
?
I ask because this file does not take you to stock. Your phone is installed as it was but with this software version. If you mean to flash another SBF, can you please link to it? Because I believe pudding is the only other SBF on here and I don't think you mean that as that is the unlocker.

enigmatl said:
When you say sbf back to stock, do you mean to reflash the file
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf
?
I ask because this file does not take you to stock. Your phone is installed as it was but with this software version. If you mean to flash another SBF, can you please link to it? Because I believe pudding is the only other SBF on here and I don't think you mean that as that is the unlocker.
Click to expand...
Click to collapse
Yes, it provides you with the stock recovery which is what you need. I also made another post a couple above this one that explained where to get the stock recovery from, which is really all you need. I guess it doesn't know how to do the update with a custom recovery. Sucks but at least you don't need to flash that whole big file. Just a small quick one. Also, you need to do the small file the (.smg) file in fastboot, not with rsd lite.
-DJ
---------- Post added at 01:01 AM ---------- Previous post was at 12:57 AM ----------
A2CKilla said:
Hey just a heads up guys, if the only thing you did was root your photon, then your good to update, won't brick your phone, here's proof
Sent from my EVO 3d using XDA App
Click to expand...
Click to collapse
Do you feel like your wireless connection signal is better? Stronger? Maybe this just keeps it form disconnecting I dunno. Just curious.
-DJ

Djspinister said:
Yes, it provides you with the stock recovery which is what you need. I also made another post a couple above this one that explained where to get the stock recovery from, which is really all you need. I guess it doesn't know how to do the update with a custom recovery. Sucks but at least you don't need to flash that whole big file. Just a small quick one. Also, you need to do the small file the (.smg) file in fastboot, not with rsd lite.
-DJ
---------- Post added at 01:01 AM ---------- Previous post was at 12:57 AM ----------
Do you feel like your wireless connection signal is better? Stronger? Maybe this just keeps it form disconnecting I dunno. Just curious.
-DJ
Click to expand...
Click to collapse
eh, i don't know really, i never really had an issue with it in the 1st place, but i guess it was a serious issue to the majority of the community, but it seems like it's just like it was before, working A-OK

A2CKilla said:
eh, i don't know really, i never really had an issue with it in the 1st place, but i guess it was a serious issue to the majority of the community, but it seems like it's just like it was before, working A-OK
Click to expand...
Click to collapse
My problem is that it is no where near as strong as my Evo was. Using wireless N router so it has some serious saturation. This thing still only gets 2 or 3 bars when I am -10ft away where my Evo was full bars around the whole house. Not to mention this bluetooth thing is really getting annoying.
-DJ

Related

[Q] CWM, CWR, Triangle+!+Android free apps frm amazon show purchased frm goog.

Ok First things first:
ATT SGSII, 2.3.6, I777UCKK6, 2.6.35.7, Build UnNamed 2.2.1
Purchased: Rom Manager, TiBu, Rom Toolbox, SetCPU, root Mobile ODIN Pro and many apps not relevant (except one) to this inquiry.
I loaded my question up here, it was lower in the body of this text but I figured I'd give a layout first of what I'm trying to figure out and then the details of what's going on.
Is the Triangle, !, android an issue with something I did or an issue with Clockwork as previously mentioned in many other threads? Basically will it show up any time I try to boot to CWR from Rom Manager? I haven't used it in so long so I don't know anymore.
**I do see where it indicates that you shouldn't use Rom Manager with this phone in threads. I am not asking whether you should use it at this point. I am asking if it is generating the error with the Triangle, ! and Android. In these steps below I also did try flashing entrophy's kernel amongst other things.
Also if anyone reading this can provide an idea of how to fix the amazon downloads showing purchased in google I'll try it but I don't want to start customizing my phone till I know it doesnt have some lingering issues.
I have flashed roms starting back with my captivate since october 2010. I have had a membership off and on on xda since at least 2003. I have read forums and studied and don't know where to look to answer this question although it's probably simple and I probably already know. Here it is...
I use amazon.. (why I dont know I've almost converted to only google market). I was lured in by their free app of the day deals. The one app I love the most is TuneIn. I have tried repeatedly to uninstall the app, remove amazon, clear cache, dalvik cache, market cache, data and everything else including deleting folders with old tunein and amazon info, all backups from any of above said tools. Yesterday TuneIn was .49 on Google (although I've tried buying it for its normal price too). After reading a post on here and using Rom Toolbox to clear all my data (yeah I screwed that up and I mean ALL data) my menu button and power button menu were disabled or gone (no boot into recovery, dl mode etc). I tried fixing it by doing a stock restore to existing rom.. didnt fix it. Thought I'd try to install a new rom, didn't fix it. Spent 6 hours last night just trying to get my phone to store stock, eventually did but couldnt get CWR (not CWM) installed. Even CWM wouldn't install CWR. If I used CWM to reboot to recovery (power button option to boot to recovery was still disabled and 3 button would take me to stock 3e) it would show me a triangle with exclamation point and the android.
As of now running my above said options, I can boot to CWR using the power button & recovery. I have also gone into CWM (which I read in the past, adamantly not to use with the SGSII - ATT) and flashed CW and when I try to boot from there I am still getting the Triangle with ! and the green android. So it appears I have CWR from power, I can flash roms again, My phone is working well again (although I still can't get tune in from google!!!!!!).
I do want to mention I formatted the sd, not external and not the inserted micro sd. Should have been a totally clean install.
Thanks for reading my lengthy info, I'm sorry if i missed this but I did work on this 6 hours last night and have been working on it 2 hours this morning.
Didn't read all of it, but here ya go.
[GUIDE] How to remove warning triangle w/ Mobile Odin
You need to read more before flashing your phone.
The triangle appears if you flash a new ROM/kernel. Another simple way to get rid of the triangle is to get a cheap usb jig off ebay.
http://forum.xda-developers.com/showthread.php?t=1311081
The Samsung Galaxy S II contains an internal flash counter which is incremented each time a non-stock binary (kernel/rom) is flashed from a computer using Odin or Heimdall. (Using the new Mobile Odin on your phone does not increment the flash counter.) The purpose of the flash counter is believed to be to allow Samsung and or AT&T technicians to detect if the phone has a voided warranty through flashing non-stock firmware. The first time the flash counter is activated, the phone also displays a warning screen on boot up with a yellow warning triangle containing an exclamation point. The warning screen also contains the i9100 logo. (Evidently, Samsung did not change the warning screen from the International version of the Galaxy S II for the AT&T version.) Some rooting methods require that a non-stock kernel be flashed before rooting can be accomplished. So rooting and flashing custom software can both cause the dreaded yellow triangle, and increment the flash counter.
It is possible to remove the warning screen by two methods. One is by using a Jig to place the phone into download mode. The other is by flashing a stock kernel using either Odin or Heimdall. However, there is only one way to reset the flash counter, and that is with a micro usb Jig. This was true for the International version of the Galaxy S II as confirmed by Chainfire on the i9100 forums. This has also been confirmed for the AT&T Galaxy S II by dayv. Please see his post here, and then go to this post and read it and the following five posts for a complete description with screen shots.
Click to expand...
Click to collapse
Not sure what your problem is with Amazon and Google Market. Are you trying to get rid of Amazon and just use TuneIn from the market?
Not the triangle you guys think.. read the full thread please
Hey guys, I'm not talking about the GT I9000 triangle. I already know how to get rid of that one..this is a triangle with an ! inside of it and an android next to it. The i9000 one is a triangle with a black ! in it..
lanisan said:
Hey guys, I'm not talking about the GT I9000 triangle. I already know how to get rid of that one..this is a triangle with an ! inside of it and an android next to it. The i9000 one is a triangle with a black ! in it..
Click to expand...
Click to collapse
are you talking about download mode?
This:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Or this?
Red5 said:
This:
Or this?
Click to expand...
Click to collapse
neither... how do I add a screen shot and I'll show you (and again it is NOT the gt i9000 one)
lanisan said:
neither... how do I add a screen shot and I'll show you (and again it is NOT the gt i9000 one)
Click to expand...
Click to collapse
A camera??
cam
LiLChris06 said:
A camera??
Click to expand...
Click to collapse
.o0O ..Sigh I figured out where the attachment button was.. thanks..
This is what I'm talking about folks.. when using the *reboot into recovery* option in rom manager this is what I get, not recovery. I can get to recovery just fine using 3 button or using the power button..
Also anyone ever figure out how to get an app you got for free from amazon to stop showing purchased with google even after say.. flashing to stock and starting fresh and not even downloading it?
That's all because you SHOULD NOT USE ROM Manager
Sent from my SGH-I777 using XDA App
Seriously, the warning is there for a reason...
What part of Do Not User ROM Manager don't you understand?
creepyncrawly said:
What part of Do Not User ROM Manager don't you understand?
Click to expand...
Click to collapse
The "User" part.
LiLChris06 said:
The "User" part.
Click to expand...
Click to collapse
Sage... Maybe it wasn't a typo after all.
What part of
Wow.. what part of *I said in my first post I know it says not to use rom manager and that's what the whole freakin thread was partly asking about along with the issue that generated this whole inquiry!*
Do people know how to read? Do people know how to respond with out being rude? If you ever read my comments I stated I know it says not to use rom manager yet you get sucked in assuming I'm talking about the GT I9100 statement.. I said in other threads it says not to use it but then again it says TO use it. I said I can get into recovery fine using the other methods and wanted to ENSURE that the droid with ! and triangle was specifically an issue related to rom manager which I had stated was UNINSTALLED!! Wow...
Secondly the question primarily was .. I downloaded tunein from amazon app store. It was free. Amazon updates don't seem to be timely as googles. Uninstalling the app, clearing caches and market info does NOT fix the issue. It will still show *purchased* and decline the download on Google. All of the above said issues were results of me trying to be able to download and install the app from google instead of Amazon. I had to reformat, stock etc my phone and reroot try to find cwr to flash to my phone. I used an old copy I had sitting around on my HD. I tried using entrophy's kernel, I tried using a few other of the new roms.. I tried using my old rom. NONE of them would allow me to flash in stock recovery or would flash over stock recovery.
I apologize if my explanations aren't clear enough. I was hoping they made enough sense but either I'm not being clear enough or people are just plain being rude. Try being useful if you respond and stating something that leads to a solution rather than an insult...
I said in other threads it says not to use it but then again it says TO use it.
Click to expand...
Click to collapse
Link?
I ask cause maybe its needs to be changed...
I tried using entrophy's kernel, I tried using a few other of the new roms.. I tried using my old rom. NONE of them would allow me to flash in stock recovery or would flash over stock recovery.
Click to expand...
Click to collapse
You can not flash in stock recovery, so if you are rooted then use Mobile Odin or any other method then flash Entropy/Siyah.
From there you can start flashing roms and see if your problems still persist.
Amazon updates don't seem to be timely as googles. Uninstalling the app, clearing caches and market info does NOT fix the issue. It will still show *purchased* and decline the download on Google. All of the above said issues were results of me trying to be able to download and install the app from google instead of Amazon
Click to expand...
Click to collapse
Did you try installing from the website and not the app?
Edit - Just got your PM, almost regret trying to help again...
LiLChris06 said:
The "User" part.
Click to expand...
Click to collapse
HAHAHA that was funny, cant stop laughing.
---------- Post added at 01:12 PM ---------- Previous post was at 01:12 PM ----------
LiLChris06 said:
Edit - Just got your PM, almost regret trying to help again...
Click to expand...
Click to collapse
You Sir...are a Saint.
Thanks
LiLChris06 said:
Link?
I ask cause maybe its needs to be changed...
You can not flash in stock recovery, so if you are rooted then use Mobile Odin or any other method then flash Entropy/Siyah.
From there you can start flashing roms and see if your problems still persist.
Did you try installing from the website and not the app?
Edit - Just got your PM, almost regret trying to help again...
Click to expand...
Click to collapse
Okey dokey - First, thanks for actually trying to respond with helpful information instead of sarcasm. I actually really do appreciate that. Second I see people all over the forums stating they use rom manager. At this point when I have more time if this thread is still open I will cite those but at the moment I don't honestly have time. I wanted to thank you first to show you I appreciate your positive feedback. I cannot install it from the android market website either, it also shows purchased. Thank you for that suggestion. Lastly I tried mobile odin before I ended up using odin on my win7 pc. I had an old stock rom from oct last year I used to flash back to stock and then gain root and cwr. Then I flashed unnamed back on. I only installed rom manager because I probably followed some other sheep who were using it stating it in multiple forums q&a and general.
Again, thanks for the suggestions, in my first post it does show I have mobile odin pro along with many other tools.
jasvncnt1 said:
HAHAHA that was funny, cant stop laughing.
---------- Post added at 01:12 PM ---------- Previous post was at 01:12 PM ----------
You Sir...are a Saint.
Click to expand...
Click to collapse
So being rude to people posting and then them sending a pm asking them not to be rude in post, when they don't clearly read all the details makes them a saint? I'm the one providing well more than enough details to support my inquiry and on a message board and thread where people are supposed to help each other ends up being a bashing section by people stating I didnt search or read enough when I clearly stated I already did all that.. that makes him a saint?
Perhaps you need reevaluation on what saints are and do.. This was easy to google and didnt require hours of searching a forum for an answer:
"any of certain persons of exceptional holiness of life, formally recognized as such by the Christian Church, especially by canonization.
2.
a person of great holiness, virtue, or benevolence.
3.
a founder, sponsor, or patron, as of a movement or organization.
4.
(in certain religious groups) a designation applied by the members to themselves.
verb (used with object)
5.
to enroll formally among the saints recognized by the Church.
6.
to give the name of saint to; reckon as a saint."
Im all for people using their brains but people have become pathetically disrespectful here. I'd love to get a moderator involved here and file a complaint. I've had 2 useful posts out of all of this. Peopel have more time to be disrespectful than to actually provide useful information. This wastes ALL of our time...
Oh boy... closed.

[Q] Help with failed OTA update (not because of removed bloat ware)?

Hey guys can anyone help me update my phone to 6.12.173? Every time I attempt to update it fails for some reason. I asked for help on the "Solution for failed OTA update (due to removed apps)" thread but I don't think I can get much help there since I never removed any bloatware. Anyways I did attempt to follow the steps mentioned in that thread, however I got a "status 7" error. Here is a picture of my last log:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help me figure out what's wrong? I'm willing to donate a few bucks to whoever can help me figure out how to update my phone.
Sent from my DROID RAZR using xda premium
Come on XDA, no one has anything? $20 bucks to whoever can help me get 6.12.173 running on my RAZR.
Were you rooted at one time? You say its not because of bloat removed.Instead of worrying about the update for now did you try and go back to stock? Dont know much but like you would just have to search for more. Regardless you could still try and flash back and if you still have problems will be more involved.
blueis300 said:
Were you rooted at one time? You say its not because of bloat removed.Instead of worrying about the update for now did you try and go back to stock? Dont know much but like you would just have to search for more. Regardless you could still try and flash back and if you still have problems will be more involved.
Click to expand...
Click to collapse
I have also same problem, but i have rooted, pls. give me step by step guide or link how to go back to stock rom. I am in MEretails with Android 2.3.5 thanks an advance
dewage said:
I have also same problem, but i have rooted, pls. give me step by step guide or link how to go back to stock rom. I am in MEretails with Android 2.3.5 thanks an advance
Click to expand...
Click to collapse
Did you check the development section? They have several guides. Dont know what MEretails is, maybe
http://forum.xda-developers.com/showthread.php?t=1457622
http://forum.xda-developers.com/showthread.php?t=1407615
Whatever area you are from.
Thanks for the reply blueis300, I am also rooted like dewage. I'll try out the guide and tell you what happens.
Edit:
It just occurred to me, if I flash to the UAE rom will I still be able to update to 6.12.173?
Sent from my DROID RAZR using xda premium
I am from Saudi arabia
System ver.65.1.21.xt910.MERetail.en.06
Android ver.2.3.5
Build no.6.5.1_73-SPD-IRD-21
WEB TOP.WT-2.0.0-113
Sent from my: Motorola XT 910 RAZR
Did you run any "root" tweaks?
What i would do...
1)backup apps+data with Titanium backup
2)copy titanium backup folder to your pc (just in case)
3)boot phone in flashboot mode. (hold vol + and - with power button when turning it on, press down to select fastboot, press up to enter)
4)use RSD lite to install fastboot files for your phone. (make sure battery is fully charged because it takes a long time to flash and it is draining your battery while flashing)
5)let phone reboot and skip setup, go to settings->privacy->reset phone.
6)now try OTA.
7)root and restore with titanium backup.
RSD lite - http://forum.xda-developers.com/showthread.php?t=1348587
Please do a bit of research to see which is the proper fastboot files for your phone. It differs for different region.
Fastboot files - http://sbf.droid-developers.org/umts_spyder/list.php
Fastboot files - http://forum.xda-developers.com/showthread.php?t=1362956
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
dewage said:
I am from Saudi arabia
System ver.65.1.21.xt910.MERetail.en.06
Android ver.2.3.5
Build no.6.5.1_73-SPD-IRD-21
WEB TOP.WT-2.0.0-113
Sent from my: Motorola XT 910 RAZR
Click to expand...
Click to collapse
You can follow the steps above.
Your fastboot file is http://sbf.droid-developers.org/umts_spyder/SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_MEA_RETAIL.xml.zip
Tweaks? Like apps or something? I only installed a few things like TB, IP tables, Screenshot ER, etc. Oh and I did install the Clockworkmod Recovery a while back but I removed it. As for my my phone, I got it off of ebay so I'm not sure what region it came from but I think it was from the US. If there is a way to double check that would be great, but I if not them I'm just going to use the US fastboot files. Anyways I check the link you gave me for the fastboot files and I saw 4 of them that said USA. Which one should I use? Also where can I find a guide on how to use RSD Lite? Sorry about my incapacity to understand this, I am a total noob about all this RSD stuff.
Cris_C said:
Tweaks? Like apps or something? I only installed a few things like TB, IP tables, Screenshot ER, etc. Oh and I did install the Clockworkmod Recovery a while back but I removed it. As for my my phone, I got it off of ebay so I'm not sure what region it came from but I think it was from the US. If there is a way to double check that would be great, but I if not them I'm just going to use the US fastboot files. Anyways I check the link you gave me for the fastboot files and I saw 4 of them that said USA. Which one should I use? Also where can I find a guide on how to use RSD Lite? Sorry about my incapacity to understand this, I am a total noob about all this RSD stuff.
Click to expand...
Click to collapse
I meant tweaks that try to boost your phone's performance. Since you have screenshot ER, go to settings->about-> take a screen shot that shows from system version to build date. Post the pic here.
Here's a tutorial that inclides RSD flashing, read just the fastboot part:
http://www.haroldchia.com/2012/01/how-to-root-motorola-razr-after.html
Here is the pic:
Sent from my DROID RAZR using xda premium
I found your fastboot file here:
http://dlhg.eternityproject.eu/mtspyder/official/xt912/VRZ_XT912_6.5.1-73_DHD-11_M1-2_1FF_01.xml.zip
source: http://forum.xda-developers.com/showthread.php?t=1362956
Make sure your phone is fully charged before flashing.
Thanks, for all the help Nikorasu. One more thing, is there a guide that will show me how to perform the flash? Again, I am a total noob at this RSD stuff.
No probs, I had difficulty like you when I first started as well.
Here's a tutorial of downgrading and rooting, that includes RSD flashing, read just the fastboot part:
http://www.haroldchia.com/2012/01/how-to-root-motorola-razr-after.html
Nikorasu said:
Did you run any "root" tweaks?
What i would do...
1)backup apps+data with Titanium backup
2)copy titanium backup folder to your pc (just in case)
3)boot phone in flashboot mode. (hold vol + and - with power button when turning it on, press down to select fastboot, press up to enter)
4)use RSD lite to install fastboot files for your phone. (make sure battery is fully charged because it takes a long time to flash and it is draining your battery while flashing)
5)let phone reboot and skip setup, go to settings->privacy->reset phone.
6)now try OTA.
7)root and restore with titanium backup.
RSD lite - http://forum.xda-developers.com/showthread.php?t=1348587
Please do a bit of research to see which is the proper fastboot files for your phone. It differs for different region.
Fastboot files - http://sbf.droid-developers.org/umts_spyder/list.php
Fastboot files - http://forum.xda-developers.com/showthread.php?t=1362956
---------- Post added at 06:07 PM ---------- Previous post was at 06:05 PM ----------
You can follow the steps above.
Your fastboot file is http://sbf.droid-developers.org/umts_spyder/SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_MEA_RETAIL.xml.zip
Click to expand...
Click to collapse
Nikorasu , thanks for saving my valuable time.
Nikorasu said:
No probs, I had difficulty like you when I first started as well.
Here's a tutorial of downgrading and rooting, that includes RSD flashing, read just the fastboot part:
http://www.haroldchia.com/2012/01/how-to-root-motorola-razr-after.html
Click to expand...
Click to collapse
Thank you soooo much Nikorasu, it worked! You don't know how much I appreciate your help on helping me updating my phone. If you set up a donate button on your profile I can send you the $20 or alternatively you can just give me your PayPal email so I can send you the promised reward when I get the chance.
Sent from my DROID RAZR using xda premium
Glad it works. I did hope that you didn't screw up your phone further. Well I didn't help you for the money but if someone wants to "donate" money to me, I won't refuse.
I'll PM you my paypal email.

Tethering FCs Settings after upgrading to official ICS

Every time I try to go to Tethering and mobile hotspot on settings, the phone stops responding for a while and then I get a message that Settings has stopped working.
Anyone figure out how to make it work?
I get the same message every time I try to activate the mobile hotspot.
Sent from my SAMSUNG-SGH-I717 using xda premium
gjim735 said:
I get the same message every time I try to activate the mobile hotspot.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
FoxFi from the play store runs without a problem, but the official tethering FCs every time.
I had the exact same issue and I got it solved by doing a factory reset. all is well now! give it a try
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No FC. Just this message. I assume AT&T requires a tethering plan. Screw Them...I use FoxFi anyways.
-Once you go NOTE, you'd say 4 inches a Joke
NOTE user:
"take a deep breath, make sure to get a good look at it, relax and slowly take it in, the size is overwhelming at first but you will have a happy ending afterwards".
Woman:
:O
ZaidSenall said:
Every time I try to go to Tethering and mobile hotspot on settings, the phone stops responding for a while and then I get a message that Settings has stopped working.
Anyone figure out how to make it work?
Click to expand...
Click to collapse
I'm getting the same issue. Pretty annoying.
I have not tried original tethering but I flashed one that bypasses at&t's check so I can use it even though I don't have tethering plan on my account. Here is the link just flash it through CWM.
https://docs.google.com/open?id=0B2NHlh4ZMFrVU3pEcTJvdUswOHc
---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------
If the link does not work you can try this one https://www.box.com/s/5c3290aaa24780b833f9
It's same file so just flash it through CWM.
dacho said:
I have not tried original tethering but I flashed one that bypasses at&t's check so I can use it even though I don't have tethering plan on my account. Here is the link just flash it through CWM.
---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------
If the link does not work you can try this one
It's same file so just flash it through CWM.
Click to expand...
Click to collapse
No luck with that either. The settings app still FCs. I would try the factory restore, but i have everything set up so nicely!
That worked for me. Flashed in cwm
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
jpcaridi said:
No luck with that either. The settings app still FCs. I would try the factory restore, but i have everything set up so nicely!
Click to expand...
Click to collapse
have you tried FoxFi?
I will try flashing the zip through CWM and see if that works for me... i'll make a backup before, though. My friend upgraded to ICS this morning and he had go launcher EX installed and go locker and he had to do a full factory wipe on the phone because after the upgrade it wouldn't go past selecting the launcher when going to the home screen...
ZaidSenall said:
have you tried FoxFi?
I will try flashing the zip through CWM and see if that works for me... i'll make a backup before, though. My friend upgraded to ICS this morning and he had go launcher EX installed and go locker and he had to do a full factory wipe on the phone because after the upgrade it wouldn't go past selecting the launcher when going to the home screen...
Click to expand...
Click to collapse
So... I decided to bite the bullet and do a factory data reset and it fixed the issue. I'm not sure what was wrong but that did the trick. But I just spent an hour getting everything back to how I had it. At least it worked.
ZaidSenall said:
Every time I try to go to Tethering and mobile hotspot on settings, the phone stops responding for a while and then I get a message that Settings has stopped working.
Anyone figure out how to make it work?
Click to expand...
Click to collapse
Yes mine was doing the same thing but then I did a factory reset and everything is great !
The update does not format system so what ever ROM you were running before this one is flashed over until you do a factory reset. Hence the fc. I flashed back to stock first and did a factory reset before doing the update.
I had some Tasker scripts setup to enable wifi tethering and I found that they still work after the update. Even though you cannot activate tethering through the interface without getting the provisioning error, Tasker can do it with a script.
Weird.
jordant2 said:
The update does not format system so what ever ROM you were running before this one is flashed over until you do a factory reset. Hence the fc. I flashed back to stock first and did a factory reset before doing the update.
Click to expand...
Click to collapse
I was running rooted stock GB, so no custom ROM...
Flashing a .zip file
dacho said:
I have not tried original tethering but I flashed one that bypasses at&t's check so I can use it even though I don't have tethering plan on my account. Here is the link just flash it through CWM.
https://docs.google.com/open?id=0B2NHlh4ZMFrVU3pEcTJvdUswOHc
---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------
If the link does not work you can try this one https://www.box.com/s/5c3290aaa24780b833f9
It's same file so just flash it through CWM.
Click to expand...
Click to collapse
This appears to be exactly what I am looking for! I have a rooted phone and I used Odin to do it. However, I do not know how to flash a CWM with Odin that is a .zip file. when I rooted I had an .md5 file. I can't choose a .zip file... I am a noob with android (obviously). Any help would be appreciated!
Thanks,
Chuck
After the ICS update, there were other things that weren't working on my phone. Tethering was the first one I found, but with time I started getting more and more FCs, the car dock being one of the most annoying, so I had to resort to a factory reset, unfortunately, but after I did it, everything works just fine.
---------- Post added at 08:19 PM ---------- Previous post was at 08:17 PM ----------
[/COLOR]If the link does not work you can try this one
It's same file so just flash it through CWM.
do you know if this will work on the galaxy s3?

Unable to update to 1.27.531.8 {SOLVED}

I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Anyone?
LuigiBull23 said:
I am stock rooted and didn't modify a single thing. The only thing I did was flash TWRP recovery because I was planning on flashing ROMS but I eventually decided to stick to stock rooted so I reflashed the stock recovery. I received the update a week ago and proceeded to install it. However, it seems to fail. When the phone boots into stock recovery it attempts to install the update but at about a 3rd of it's progress it immediately stops and all that is displayed on the screen is a phone flat down with a red triangle and exclamation mark inside it. I've tried searching about this but everything I find leads me to the One X and I've never owned that phone so I'm not sure how similar they really are. Does anyone know why this is happening? Would it possibly be due to a corrupted recovery file within my download source? Any help would greatly be appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Did you relock bootloader?
Sent from my HTC One using Xparent Skyblue Tapatalk 2
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
mrmytouch said:
Mine is unlocked and the update worked fine. You just need the stock Tmo recovery to make it work.
Click to expand...
Click to collapse
That's the thing.. I do have the TMO stock recovery. Unless you can provide me with another link, the one I downloaded doesn't seem to work at all and I've redownloaded numerous times. I still get that triangle..
Link to stock tmobile recovery is here
I got it from this thread
mrmytouch said:
Link to stock tmobile recovery is here
I got it from this thread
Click to expand...
Click to collapse
Thanks man. much appreciated. I will try this one out and see how it goes.
LuigiBull23 said:
Thanks man. much appreciated. I will try this one out and see how it goes.
Click to expand...
Click to collapse
Did it work out for you mate?
mrmytouch said:
Did it work out for you mate?
Click to expand...
Click to collapse
My apologies. I completely forgot to report back to this.. YES, all is well now. Not sure why the other recovery didn't work as it did work for others but guess that doesn't matter now. Thanks a lot for your help. Much appreciated.
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Sounds more like a bootloader issue...
bestofrhcp said:
I used this recovery, and it completely wiped my phone and all my stuff was gone. And it still didn't install the update. Is that normal?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
mrmytouch said:
Yes when you flash recovery I believe it will Wipe your sd card. But your stuff should be on your gmail account though at least your phone numbers. You need to give us more info. Are you on stock t mo rom?
Click to expand...
Click to collapse
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
LuigiBull23 said:
As far as I'm aware unlocking the bootloader or flashing an RUU are the ONLY things that wipe your storage. Flashing recoveries doesn't touch it except for adding in the necessary files to function properly.
Click to expand...
Click to collapse
I really cant remember if it did or did not when I flashed the recovery but in post #8 he said it wiped his sd. I could be wrong though. Just trying to help this guy out. I do know unlocking bootloader does wipe your sd though so i'm sure your right I just cant remember.
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Sieze said:
:| is the update supposed to go "reboot, recovery, blue bar moving along HALT reboot, recovery bigger loading blue bar, STOP dead, Red triangle"
ive tried it 3 times no luck.
ive Locked and reset the tamper flag with revone still wont install the OTA
its no so much I WANT the update as much as i WANT my phone to stop buggin me about the damn update XD
ive followed the thread linked above and tried all methods provided. no luck so im sure im doing something horrificaly wrong XD
all i can provide is this,
Verifying curent system...
assert failed: apply_patch_check("/system/build.prop", "5c450bd35b662fa55d667bda7463960e2eb669c
5", "48daa0113456b06b44b52c1b777d7d2e49af1196")
Instalation aborted.
soo all i got was something is up with the build prop that it dosnt like... as for the other randomness hell if i know.
its weird though as ive never rooted the phone. i just unlocked bootloader to get a custom recovery on it so i could make backups of my entire phone.
and flash that one mod that gets rid of the 3 dot bar.
Heres the build prop paste bin
http://pastebin.com/cT1sZ73K
Click to expand...
Click to collapse
Are you even on stock recovery?
LuigiBull23 said:
Are you even on stock recovery?
Click to expand...
Click to collapse
technicly yea XD i flashed the latest stock recovery and being as my phone wasnt OTA'd to the 4.2.2 its recovery was from the 4.2.2 but the rest of the phone wasnt. unless i can get my hands on the stock recovery from my phone im **** out of luck and will be forever stuck with the red triangle of ass... its at times like this i regret my haste and stupidity XD
just tryed again and now its spitting out that assert failed for system/app/settings.apk

[ROM] Stock_ZVA_L_Odexed

ZVA-Lollipop!
Brought to you by
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is BONE STOCK. It only has Root, Kernel, and Modem/Radio
See post #2 for some important info
See post #3 for extra files/fixes
Install instructions:
1. Flash this in TWRP - MAKE SURE YOU CLEAN FLASH THIS!
In TWRP, select Wipe>Advanced>then select cache, dalvic, data,and system. DO NOT select int or ext SD.
2. Flash Rom
3. Profit!
After install:
Go to Settings>System Updates> and update profile/prl. You can also go to "Activate this device".
If you do not have Sprint bootani or Wifi Calling
You will need your MSL number and do the dialer reset. So in the Dialer ##786#. This will wipe your int SD!! And everthing else, so you will be starting fresh.
Bugs:
None that I know of.
Downloads:
Stock_ZVA_Odexed
Stock_ZVA-Odexed-using-updater-script - This has root, busybox, init.d, and Selinux permissive, only. NO MODEM.
If you use this one, pattern unlock will lockup the phone requiring a battery pull!!!
You do not need to flash this if you're already updated. This is just for those that want to modify the zip before installing. Actually, either one will update you to ZVA.
Deodexed System files only
XDA:DevDB Information
Stock_ZVA_L_Odexed, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2015-06-25
Created 2015-06-26
Last Updated 2015-06-25
Hints, Tips and stuff​
You will more than likely need to follow the steps above to get WIFI Calling. I would suggest doing this in the beginning so you don't lose all your work!!!!! I haven't gotten this far yet, but I think it wipes your SD. Make sure to back it up first!!
It didn't wipe internal SD!!! But better safe than sorry
Backup your EFS first!!! Just to be safe - In the FAQ
A dialer reset may be required for a lot of the issues. In order, easy to most invasive.....
##UPDATE#
or
##SCRTN#
or the biggie - which fixes bootani and Wifi calling
##RTN# - requires your MSL. You will need to either call Sprint. Or, follow THIS
Files and fixes​
Sd Card fix
Increased mixer paths
Stock kernel with init.d support and Selinux permissive - you must have busybox installed for this to work.
Deodexed files only Not flashable
Do you know if your Navel Kernel works on it?
Jimmy50941 said:
Do you know if your Navel Kernel works on it?
Click to expand...
Click to collapse
I haven't tried that yet. Still experimenting with this new rom.
I know I need to modify for the ext sd though. But that's not a big deal.
engine95 said:
I haven't tried that yet. Still experimenting with this new rom.
I know I need to modify for the ext sd though. But that's not a big deal.
Click to expand...
Click to collapse
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
Jimmy50941 said:
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
Click to expand...
Click to collapse
edit: Its done downloading, but phone isn't charged enough at the moment for me to feel like flashing. ill give it an hour or so.
Jimmy50941 said:
Do you think that would cause problems trying it? I dont even use external SD right now.
I almost have the rom downloaded. its slowly downloading at 1.3mbps :-/ lol
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
edit: Its done downloading, but phone isn't charged enough at the moment for me to feel like flashing. ill give it an hour or so.
Click to expand...
Click to collapse
Make a backup first. Then try it. I'll try it tomorrow just cuz I'm curious too.
If you get slow dl from there, just pick another server. That usually works.
Navel kernel doesn't work for this rom. Just flashed it and got a security error on boot
See post #3 for files and fixes. All flashable in TWRP
What changes in ZVA?
Nav-bar and status bar are missing, don't know what happened. Came from [ROM][GSM/[Stock 5.0.1]PRIMEGSM (V3.1), full wiped including internal.
Lurien said:
What changes in ZVA?
Click to expand...
Click to collapse
Just little things really. Nothing major.
Mostly I've noticed the WiFi calling just has the icon now.
scorpic1978 said:
Nav-bar and status bar are missing, don't know what happened. Came from [ROM][GSM/[Stock 5.0.1]PRIMEGSM (V3.1), full wiped including internal.
Click to expand...
Click to collapse
You probably need to do one of the dialer codes I've posted in other threads.
##UPDATE#
##SCRTN#
or the biggie
##RTN# - you need your msl for that one
@engine95 so this will
Not give me security error on boot because of autorec is already installed? Also Is it possible to get this deodexed i am running barepops zv8 deodexed now.
Sent from my LGLS990 using Tapatalk
Just wondering, Im new to LG and just wondering if this will include the modem when i flash it or will i flash this and still have ZV8 modem?
galaxyhero said:
@engine95 so this will
Not give me security error on boot because of autorec is already installed? Also Is it possible to get this deodexed i am running barepops zv8 deodexed now.
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
I don't know about autorec. Make a backup then flash this rom. It should work.
Gimme some time. I just put this out yesterday.
JG96EVO said:
Just wondering, Im new to LG and just wondering if this will include the modem when i flash it or will i flash this and still have ZV8 modem?
Click to expand...
Click to collapse
Sorry, forget to say, kernel, modem and system are in the zip. But the modem has the same number, just a tiny bit smaller.
So this will not give lg security error on reboot?can anyone confirm.
Sent from my LGLS990 using Tapatalk
engine95 said:
Just little things really. Nothing major.
Mostly I've noticed the WiFi calling just has the icon now.
You probably need to do one of the dialer codes I've posted in other threads.
##UPDATE#
##SCRTN#
or the biggie
##RTN# - you need your msl for that one
Click to expand...
Click to collapse
Ok.. But does it feel or run better than ZV8 at all?? I downloaded this morning but haven't had time to flash yet. Thanks..
@engine95 how did you bump the kernel. I tried bumping the kernel and it would not boot. Is it okay for me to just take your kernel out of the zip file? I assume that you had to keep the padding. Is there a new bump tool because the one that I use breaks stuff.
l33tlinuxh4x0r said:
@engine95 how did you bump the kernel. I tried bumping the kernel and it would not boot. Is it okay for me to just take your kernel out of the zip file? I assume that you had to keep the padding. Is there a new bump tool because the one that I use breaks stuff.
Click to expand...
Click to collapse
You're more than welcome to use it. Just give credit.
I had to unpack and repack it a different way. Sneaky LG/Sprint. Try using "Android Image Kitchen." mkbootimg tools didn't work as the compression is different.
Your bump should work this way.
I haven't got the fixes/kernel, but this rom feels a lot faster for me. only problem, which might be attributed to the kernel, is my battery died today after 4 hours (died before noon) of sitting in my pocket lol but i work in a building with absolutely no cell service, but usually my phone lasts all day at work, and i have to charge when i get home, or on the way home.
And i did try the Bare Navel Kernel last night before i went to bed, and got the LG Security error trying to boot up.

Categories

Resources