Obsolete - Touch2 ROM Development

Obsolete
see http://forum.xda-developers.com/showthread.php?p=19893221#post19893221

id\ did it and my mobile now dont make any response to any kind of action i cant even open it boot it or any thing
noooooooooooooooooooooooo

did you have a stock rom or custom one before flashing ? how did you flash it?

thx in advance
i was using latest stock rom of my country (middle east)
but i used the spl flasher but changed the file with the link in this forum and then every thing went black i cant even press volume down to install a rom or boot any thing cant even charge my mobile

warning
pls dont installllllll my phone is completely brick dont installl people
i swear my phone is now completely brick down

Flash back hardspl or your backup

The old SPL file was corrupt, the first post is updated with a working new SPL.

How to flash this to my phone?
I tried via rom update utility but it can not read the file.

[edit]
obsolete message

Thanks.
This file works with rom update utility.

Great.
Did you find any difference with SPL 1.28 other than the charging animation?

so far no.

You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"

VirusPlus said:
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
Click to expand...
Click to collapse
Do you have 1.28 HardSPL or stock 1.28?
You should probably flash HardSPL first

I have 1.28 HardSPL, not stock one. I reflash HardSPL tho but still nothing

I'm searching for a way to fix this.
Will keep you posted

[edit]
obsolete message

Related

HD2 Bricked!-Upgrade Rom Code Error - not able to get out. PLEASE HELP!

Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat

Well obviously we got a problem with my HD2

Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..

My HD2 is a brick now... after trying to flash a stock ROM :-(

Hi,
After months and months of installing custom ROMs, and I even ran Android for few months, I need to take it to service (I broke the screen).
I have tried (not successfully) to install SPL on it using HSPL3 (info got from here http://forum.xda-developers.com/showthread.php?t=609477). After I have opened HSPL3 and clicked first "Next" button, few seconds later it has generated an error. The phone remained in the 4 color screen showing me the HSPL version I have (SPL-1.42.HSPL XE). From here nothing works (hard reset doesn work, it takes to same screen).
PLEASE help. Nothing I read helped. Phone is unusable now.
Thank you in advance.
PS: I admit I am doing something wrong (since I can not fix it any more)...
[LE: I have copied "RUU_signed.nbh" renamed it, opened Bootloader and I was able to install SPL-1.42.0000. But now I am still stuck in same 4 color screen in the beginning... Hard Reset nor Soft reset do not work.]
Try to star in bootloader mode (vol down + power button), connect usb cable and install HSPL 2.08:
http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
dea.cristi said:
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
Click to expand...
Click to collapse
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
One more info your sd card has to be a normal one (1G or 2G) not HC
and after that reinstall hspl let me know if it was working
Regards,
Me
icsulescu said:
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Did you downloaded the rigth stock rom???
i had similar error trying to install a wwe on a portuguese HD2...
Then i downloaded the portuguese stock rom and worked.
I hope you can recover it.
See ya...
S_Phoenix said:
Did you downloaded the rigth stock rom???
Click to expand...
Click to collapse
I have bought the phone from Romania and this is the ROM I downloaded:
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
dea.cristi said:
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Click to expand...
Click to collapse
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
tidus18 said:
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
Click to expand...
Click to collapse
Yep, it seems this is the problem.
Find the first of the stock roms for the country the phone is locked to and flash it.
But try to flash the complete rom and not only the radio.
Try this older rom:
Code:
http://www.htc.com/ro/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Or this one:
http://www.4shared.com/file/236870807/d9482029/RUU_Leo_HTC_WWE_EastEurope_166.html
Or go here and flash older radios:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=serial
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number. This will ensure that you are only allowed to download a ROM that is allowed on your phone. If you get an invalid message, then you need to try another ROM.
You may have a operator locked phone - you can only flash a O2, Vodafone, T-Mobile, etc ROM.
More ROMS
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
fred_up said:
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number.
Click to expand...
Click to collapse
Wish I could... If I enter the serial and try to download I always get the message "not available".
JWhipple said:
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
Click to expand...
Click to collapse
Thanks for your replies. However, I was able to fix it... by mistake.
After seeing that nothing works I connected the phone while it was showing that screen (4 colors) and I have flashed the stock ROM mentioned by me in previous posts using the flashing tool inside the package. Even if the main condition was to have it sync-ed, I have tried anyway and it worked (it is not sync-ed unless it boots up first).
Now it is functional again and ready for service.
Happy ending eventually.
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
gagi75 said:
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
Click to expand...
Click to collapse
If you don't know from where your device is coming from, with witch operator it is brand; than you can contact HTC.
And share them your S/N thy will be able to communicate you to witch provider your device is branded.
thanks m8 thanks again
unbricked Vibrates 7 times then freeze
so i did this and unbricked my phone but now my phone will Vibrates 7 times and then freeze???? help me plz

[q] help please ??!!!! :(

Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.

[Q] Plain White Screen

Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't.
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
Click to expand...
Click to collapse
Sorry to hear your HD2 is not working right now Skellyyy. I am with T-Mobile so I am not familiar with O2 but do they not have an official ROM on their website? Do you have to download your official ROM from HTC? I tried to pull up the o2 website but for some reason it would not let me pull it up. I went to www.o2.co.uk/ and I got this error message.
Error 502 - Bad Request
The server could not resolve your request for uri: http://www.o2.co.uk/
Click to expand...
Click to collapse
The exe is how you run the update utility for that ROM too by the way. Well atleast it is if you are using a computer to flash it. You have to right click on it and click explore to find tbe RUU file.
Also seeing as you have the EU HD2 why not just download the official update from the T-Mobile website and try it?
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Skellyyy said:
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Click to expand...
Click to collapse
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
Skellyyy said:
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
Click to expand...
Click to collapse
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
Skellyyy said:
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Click to expand...
Click to collapse
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Click to expand...
Click to collapse
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
T-Macgnolia said:
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Click to expand...
Click to collapse
I've downloaded the RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship .zip
Let's hope it works.
samsamuel said:
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there. I can't seem to find a way to change it to a .zip or extract it. It's a basic .exe file.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
Click to expand...
Click to collapse
Yeah no, that happened me before and I was only had 2.08.0000 but I'm sure I have 2.08.HSPL now. As I've said, it's happened before, in which all I did was do a soft reset and that worked. Doesn't seem to work now though.
I'm pretty sure MAGLDR is wiped now anyway, as when I plug a USB in while off it doesn't boot up, but just goes to a red LED. Is this normal yeah?
Just tried flashing the ROM I mentioned... the little progress bar showed... then the phone rebooted. Now it's back to SPL.
I don't there's anything I can do now is there? :/
ok, hang on, do you have a tmous, or a regular hd2 from t mobile?
I have a EU Leo. I don't know where it's from as I bought it second hand. The guy said it was bought on o2 Ireland.
Hey SKellyyy not saying I don't beleive you but just do this to confirm you have a DU HD2. I know for positive I have a T-Mobile HD2 as I bought mine brand new from a T-Mobile store. On your HD2 touch Start/Settings/scroll down to About Phone/Hardware Information. This is what mine says.
CPU
Qualcomm (R) 8250B
Speed
1024 MHz
RAM size
576MB
Flash memory size
1024 MB
Data bus
32 bits
Storage size
686.99 MB
Display resolution
480x800
Colors
65536
Bluetooth version
2.1/2.1+EDR
Bluetooth address
38:xx:xx:xx:xx:xx
Compare yours and let us know.
if the send key is white its regular, green its tmous. yours will be regular, from o2.which is why none of those roms you tried worked. only ONLY o2 roms will work unless hspl is there, anmd as soon as you flash any stock rom using sd card, it will remove hspl and then teh flash will fail, but hspl is already gone.
so, to get..
a winmo rom
bootloader - hspl4 - 2.08.hspl (3.03.hspl if you want a 3.14 rom) - bootloader - radio (if needed to update, see the rom thread) - bootloader - flash rom
to prep for nand android
bootloader - hspl4 - 2.08.hspl - bootloader - radio - bootloader - magldr - magldr usb flasher - flash CWM
bootloader -
Lol dude I'm pretty positive as it only has 512MB ROM and it has no T-mo on top and the buttons are white.
I've already tried to flash HSPL again but that was using the second version of the software (can't remember the name) and it failed. It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Where will I get a stock o2 ROM as the HTC website says "this software isn't available for your device"?
Skellyyy said:
It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Click to expand...
Click to collapse
thats more likely the comp, not the phone. all usual things, reinstall activesync/wmdc, dont use 64bit os if you can help it, firewalls off, etc etc etc. easiest first test is use a different pc.
It was fine flashing CWM on Friday. Currently can't use a different PC, will get one later and try again.
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
hspl is different than flashing roms / cwm.
flashing and sync will work through any old usb port, rarely need to turn off firewalls, whereas hspl is realllly choosy. gotta be a usb socket directly on the motherboard, hates 64bit win, times out before the phone has rebooted if you start it from winmo running, isnt all that happy if you have changed teh usb drivers for that particular port, say for mtty, or android, (each usb port has its own drivers associated with it, thats why swapping usb ports if it fails is always the first step, try them all)
I've tried three different PC's. Two desktops and one laptop, all plugged in to motherboard USB'a but none of them are installing HSPL. They're all just going up and down on the progress bar. Should I try HSPL4? I'm using the HSPL3 program.
No computers are running 64bit btw.
Is there anywhere I can just get the o2 ROM and try flash it?
Yea go to HTC website, support, pick phone, downloads, change dropdown to rom upgrades, operator name is in the title. You can also find them in the official roms thread in rom development section, and elsewhere in various threads.
Keep gour head up!
Skellyyy said:
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
Click to expand...
Click to collapse
Sorry you are having so much trouble out of your HD2. The HD2 is a great device but they are quirky as hell. I sure you will get it fixed, keep your head up man. Oh and don't give up on the HD2 just yet cause just like King Authur's Excalibure, The HD2 is a thing of legend.
Excilcior
Yeah, I'm currently looking to get a new HD2. Decided.
It's just the bootloader doing my head in, found the official ROM I need, but it'll only flash from PC and it's stuck at 0%. I need it as a .nbh so I can install from SD card. Do you know how I can do that if the RUU I downloaded is a .exe?
If you got RUU in .exe file install WinRar right click on the RUU file and choose "open with WinRar" then extract the .nbh file

Categories

Resources