I am considering purchasing the T-Mobile Pocket PC Phone. I need the ability to connect a wireless device to my laptop while I travel. Can I connect the T-Mobile pocket pc phone to my laptop? If so, do I need a cable for that or can I do it via IR?
Thanks,
Brian
Wireless modem on XDA is serial cable or irda. Be sure to disable activesync before and connect your phone to laptop before pushing the "start", button.
So will W2K automatically detect it as a modem?
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Tekflow said:
Well, actually not really. Regarding the infra red connection, I had to install first a virtual infra red port (http://www.cyber-mill.com/irdaw2k.zip), and then install on it the standard 33.6 Modem.
If you want, I can post how to do this, step by step, and it works.
Click to expand...
Click to collapse
That would be awesome if you would do that.
Thanks!
Brian
http://xda-developers.com/phpBB/viewtopic.php?t=2643&highlight=modem
in this thread there is an url to a pdf which explane how you do it step by step
USING XDA AS A MODEM
example for GPRS connection
Before installation, note carefully (for your GPRS connection):
The access point name of your network provider
Your username and password
PS: if you don't know the access point name, open -on your device- settings/connections/internet settings
press on modify... then press on your GPRS connection
press on next: you will see the access point name.
Preliminary step: for infrared use only (skip for serial connection)
unzip irdaw2k (download from: http://www.cyber-mill.com/irdaw2k.zip)
click on setup, wait till end of installation
open your pc control panel/system/hardware/device manager
Click on ports and note on what port the infrared virtual com is installed (example: com5)
Step one: installing modem
open control panel/phone and modem options
choose modems tab. click add...
check don't detect modem
select from standard modem types: standard 33600bps
click next. install on selected port (com5 in this example)
after end of installation, click on properties for the modem
on tab Modem, confirm maximum speed 115200
on advanced, extra initialization type: AT+CGDCONT=1,"IP","xxx","",0,0
where xxx is the access point name of your network provider
select change default preferences
change flow control to none
clik OK to finish
Step two: setup the network
In control panel/network connections/ select file/new connection
select connect the internet, then manual setup
choose connect using modem. confirm the standard 33600bps
Give a name to the ISP
Choose: *99# as phone number.
write your username and password
do not use dialing rules
Step three: using XDA
Make sure activesync is disabled
Once connected through serial port or facing IR
Open wireless modem. choose connection (serial or IR)
click on start
wait for confirmation of connection on PC
Start dial-up from PC
ps: during this time, GSM phone line is disconnected
It reconnects automatically after disconnecting the modem
Hi.
Anyone enable ad hoc connection on this phone on android 2.1 ?
If yes tell me how to do it.
tazone said:
Hi.
Anyone enable ad hoc connection on this phone on android 2.1 ?
If yes tell me how to do it.
Click to expand...
Click to collapse
You mean like connecting to another ad-doc or creating one of your own for others to connect? For the second one, you need barnacle from market - works great.
tazone said:
Hi.
Anyone enable ad hoc connection on this phone on android 2.1 ?
If yes tell me how to do it.
Click to expand...
Click to collapse
you mean connecting your phone to a adhoc connection like in laptops??
I also want to know how to connect to ad-hoc metworks in laptops/pc?
vinizie said:
I also want to know how to connect to ad-hoc metworks in laptops/pc?
Click to expand...
Click to collapse
there is a program called Connectify which use your laptop wifi to make a hotspot area.. you can connect your android phone to the said hotspot. www.connectify.me only available to windows 7 and windows 2008
I am assuming that you already know how to a create adhoc network on your laptop and share your internet connection.
X10 can connect with adhoc networks, but you will need to set it up manually. The steps are outlined here. Root required.
From the article here:
Windows 7 comes with a new feature for sharing your computers internet connection. Now you can do it wirelessly. Well, As long as your system’s wireless network adapter supports Windows 7 “virtual wi-fi” feature, you can do it.
Next you need to check if your network card has the latest driver to support the feature. Intel, Broadcom, Realtek and some other NIC makers provide such drivers.
If the two above conditions are met, you are good to read on …
1. Open an elevated command prompt (Type “CMD.EXE” in the start menu search bar, then right click the cmd.exe link and select “Run as Administrator”).
2. In the command window, type: netsh wlan set hostednetwork mode=allow ssid=MyNet key=MyPassword
Replace “MyNet” with the name you want to use for the wireless network and replace “MyPassword” with your chosen password for accessing it)
3. Press Enter.
4. Now type: netsh wlan start hostednetwork
5. Press Enter.
6. Open Control Panel and go to Network and Sharing Center.
7. Click Change Adapter Settings.
8. Right click your Internet connection and select Properties.
9. Click the Sharing tab.
10. Check the box that says “Allow other network users to connect.”
11. Choose your virtual wi-fi adapter and click OK.
Now wi-fi enabled gadget (mobile phone, laptop, ipod, etc) within range should see your new wireless network and others can connect to it if they know the password.
if you've turned off your computer and need to enable this feature, you can just type "netsh wlan start hostednetwork"
Connectify is a good option though if you don't to do the steps above.
====
if this isn't about the topic then ignore 'coz i'm a bit confused as to what you wanted to do.
the question is do you want to share your laptop's internet connection so that your x10 mini can connect to it?
OR
do you want to create share your x10 mini's internet connection so that others can connect to it? (Barnacle is the answer)
anyway, as far as i know, x10 mini/mini pro can't connect to any adhoc network.
I have xperia x10 mini pro. Trying to set up wi-fi adhoc (IBSS) with a laptop.
Changed / system / etc / tiwlan.ini
Code:
...
WiFiAdhoc = 1
dot11DesiredSSID = x10mp
dot11DesiredBSSType = 0
...
and / data / misc / wifi / wpa_cupplicant.conf
Code:
ctrl_interface = wlan0
wpa_supplicant GROUP = system
update_config = 1
eapol_version = 1
ap_scan = 2
network = {
ssid = "x10mp"
scan_ssid = 1
key_mgmt = NONE
mode = 1
frequency = 2412
}
When I turn on wi-fi on the phone immediately goes to connect to the correct grid, for a long time hanging message "Obtaining IP address ...", and then says" failed ".
What's the problem? What's best way to organize such a network?
(tl;dr, experienced modders: skip to the steps section below)
I've spent several days trying to set up sharing of my mobile phone's Internet connection with my tf201. The phone (Nokia 6120 classic, running Symbian S60) has neither WIFI, nor bluetooth PAN (don't worry, the terminology is explained below), and there's no PDANet version available for it, which left me with two ways to tether with it: wired USB connection or bluetooth DUN. I show here how to configure both. You might want to do this if you're in a similar position as myself, but also if you want to replace wifi tethering with bluetooth DUN (bluetooth is said to be less power-hungry).
While I'd like the howto to be accessible to novices (such as myself), I can't cover basic/trivial parts and in general will assume a reader capable of googling and with a basic Linux familiarity.
This post does NOT relate to the issue of enabling bluetooth DUN on your Android phone or changing the server side of the connection in other ways. Please don't comment about that in this thread.
My primary source is this outstanding article in Russian, which solves the same problem for a different tablet: notioninkinfo.ru/telefon_kak_3g_edge_modem_dlya_adama/
The process turned out to be much simpler for Prime, since it has most of the necessary software in place.
Background
Sharing internet connection from your mobile phone to another device is called "tethering". Obviously, tethering has great importance when mobile devices are involved, thus a naive soul could hope that it works perfectly in Android. Surprisingly, the opposite is the truth: Android hates tethering with passion; so much that (stupidity being inapplicable) I have no choice but to suspect malice on Google's/ASUS's part. It's not that they lack the resources to implement it; or that the feature requires some kind of special know-how they don't have. No: all these features are present and work in vanilla Linux; the appropriate kernel drivers exist and work; in some cases, the features worked in earlier versions of Android, but have been disabled in later ones. Some bugtracker issues related to this have not received any attention, despite having tens to hundreds of comments from angry users. code.google.com/p/android/issues/detail?id=16717&q=dun&colspec=ID%20Type%20Status%20Owner%20Summary%20Stars
/rant
About tethering
There are multiple ways to do tethering that I know of (and probably then a few more). Most of them, unfortunately, are not enabled out of the box or even implemented in Prime at all.
1. Wifi hotspot: this works well *if* your phone supports it. "Hotspot" means that the device acts as a kind of router that is "meant" to accept connections from other devices and not just "happens" to have wifi. AFAIK, from the practical perspective, the only distinction is that the devices present themselves differently.
2. Adhoc wifi: this is the opposite of "hotspot wifi". Transformer Prime with Ice Cream Sandwich (ICS) does not currently support connecting to an adhoc wifi network directly. The feature was present and worked fine in some previous Android versions, but thanks to an offending kernel commit, no longer works in ICS. The only known workarounds are PDANet (see below) or making a custom ROM with a patched kernel. I don't recommend trying the latter at this time, as very few brave souls have already done it, and that was the last anyone heard of them I don't know if all the issues have been ironed out.
3. Bluetooth. There are two ways of connecting through Bluetooth (that I know of). In order to work, both require certain capabilities, or profiles, to be enabled on your phone. It is quite possible none of the two profiles are enabled or even implemented, in which case you're screwed.
3.1. PAN (Personal Area Network): treats the phone as an intelligent device. When connecting to the Internet, the client "asks" the server to establish the link and only forward data from and to the client. This is one of the best ways to do tethering, and fully supported by Prime's user interface out of the box.
3.2. DUN (Dial-Up Networking): treats the phone as a "dumb" device: the client takes over the phone's modem and uses it directly by sending it both commands and data through an emulated serial (RS232) link. This has several disadvantages, among them it requires the client to be aware of the line provider's dial-up config, such as service number, service name, user and password. Prime does not support it out of the box, despite (as we will see) having adequate hardware and software for it.
4. PDANet: this is an application (accessible from the market) that somehow circumvents Prime's and Android's restrictions on wifi and BT connectivity. You install it on both devices, configure it, and it should work. This method is only applicable to a few platforms that PDANet supports, including Android, but not Symbian.
5. USB: if your Prime has the dock, you've got a full-size USB port on it, which can act as a USB host. You can use this port to connect to your mobile phone (if your phone supports it). In some cases, connecting the phone will cause the Prime to discover the phone's modem, and once it is discovered, you can use it just like DUN.
Methods available out of the box: (1), (3.1). Methods this howto is concerned with: (3.2) and (5).
Prerequisites
1. Ice Cream Sandwich (ICS). It is possible the guide will work with earlier versions, but I didn't try it.
2. The tablet is rooted.
3. adb is installed.
There are plenty of other topics that explain how to get these.
Steps
(Note that I'm writing this from memory, so some inaccuracies are inevitable.)
1. connect the tablet to your PC with adb and execute:
Code:
adb shell
2. become superuser:
Code:
su
3. make /system writable:
Code:
mount -o rw,remount /system
4. download the attached ppp scripts
5. download a pre-compiled rfcomm binary here: omappedia.org/wiki/Android:_Working_with_pre-built_binaries
... or build it yourself. Or, if you're stupid enough to trust a random person on the internet, you can use the rfcomm binary included in the attachment.
6. gather the necessary info:
6.1. for USB:
6.1.1. connect your phone to the tablet by USB cable and try to make the tablet recognize it as a modem. This could vary from phone to phone. My 6120c Nokia needs to be connected in "Nokia PC Suite" mode.
6.1.2.
Code:
ls /dev/tty*
. If it worked, you should see new device(s) in the list. In my case, I got /dev/ttyACM0 and /dev/ttyACM1. I'm not sure why it creates two devices instead of one, but using /dev/ttyACM0 seems to work fine.
6.2. for DUN:
6.2.1. enable bluetooth both in the tablet and in the phone and pair them
6.2.2.
Code:
sdptool search DUN
The output should look like this:
Code:
Searching for DUN on [B]00:1E:A4:66:94:2E[/B] ...
Service Name: Dial-Up Networking
Service RecHandle: 0x10019
Service Class ID List:
"Dialup Networking" (0x1103)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: [B]2[/B]
7. Using the above information, fill the placeholders in the scripts you downloaded. In particular, the following must be replaced with real settings:
7.1. the device on line 8 in 3g_usb. Replace "/dev/ttyACM0" with the device you got in step 6.1.2
7.2. MAC and channel in 3g_bt_up. Use the values you got in step 6.2.2.
7.3. username and password in 3g_usb and 3g_bt. If you can use mobile internet from your phone, these values are already stored in the phone, so you just need to find them in the settings. Failing that, search for the correct values for your operator on the net (they are often the same for all users of the operator) or inquire the operator.
7.4. host name in 3gchat. Again, this varies from operator to operator. Note that the host name need not end with "com" or another valid root domain, and can thus sound nonsensical, e.g. "internet.internet". In my case (Israeli operator called Rami Levi), it was "internet.rl".
7.5. There are more operator-specific settings you might need to change in 3gchat, e.g. the dial-up number. In case the current value (*99***1# in my script) doesn't work, you can most likely find those on the net. If it doesn't work, search the net with query like "pppd chat <MY OPERATOR>" (without the quotes).
8.
Code:
adb push 3gchat /etc/ppp/
adb push 3g_bt_pdown /system/bin/
8.1. for usb connectivity:
Code:
adb push 3g_usb /etc/ppp/peers/
adb push 3g_usb_pup /system/bin/
6.2. for DUN connectivity (mind the trailing slashes):
Code:
adb push 3g_bt /etc/ppp/peers/
adb push 3g_bt_pup /system/bin/
adb push rfcomm /system/xbin/
7.
Code:
adb shell
chmod 0755 /etc/ppp/3gchat /system/bin/3g_usb_pup /system/bin/3g_usb_pdown /system/bin/3g_bt_pup /system/bin/3g_bt_pdown /system/xbin/rfcomm
8. try running 3g_bt_pup and 3g_usb_pup in adb
9. if it works, find a way to run these scripts directly on the Prime. E.g., you might want to make a GUI launcher for every one of 3g_bt_pup, 3g_usb_pup, 3g_pdown. The author of the original article recommends an app called GScript. I personally never tried it, as I just use Terminal Emulator from the market.
10. (Don't forget to remount /system in ro mode.)
Known issues
1. DNS refuses to work when you connect through the scripts. A workaround that I found is to connect to a wifi, then disconnect, then connect using the scripts. DNS will continue working until the next reboot. (I didn't have enough time to play with it yet, so not sure this is consistent.)
2. I consistently get 2-3 times slower download speed through DUN than through USB. Perhaps this has something to do with my phone, OTOH could be a problem in the scripts.
Enjoy! Corrections, tweaks, fixes are welcome.
Thank you very much!
I was trying to bring the tablet into the internet using bluetooth DUN for days. Your rfcomm, skripts and complete explanations did the trick: Archos G9 10.1 with Android 4.0.4 (Archos: 4.0.25) connects to Nokia N79 and dials into the internet.
neatfires said:
Known issues
1. DNS refuses to work when you connect through the scripts. A workaround that I found is to connect to a wifi, then disconnect, then connect using the scripts. DNS will continue working until the next reboot. (I didn't have enough time to play with it yet, so not sure this is consistent
Click to expand...
Click to collapse
Do you already have a solution for this problem?
I see strange behavior:
What I tried:
I had a look into syslog (using logcat) which reveals the DNS servers of the 3g provider.
Then I entered this IP-address in /etc/resolv.conf
Result:
* traceroot resolves the names but
* ping does not,
* ICS Browser+ does not and
* K9 does not resolve the DNS names
Do you have any idea how this problem could be solved?
Best regards,
Pfeffer2de.
Hi pfeffer2de,
Unfortunately, I don't have any other solution to this problem than the workaround I mentioned (connecting to the wifi before using DUN). I haven't used DUN at all since late spring, so I have no new input on this. If you find a solution, please post it here for other people to learn about it.
Hi neatfires!
neatfires said:
Unfortunately, I don't have any other solution to this problem than the workaround I mentioned (connecting to the wifi before using DUN). I haven't used DUN at all since late spring, so I have no new input on this. If you find a solution, please post it here for other people to learn about it.
Click to expand...
Click to collapse
I have to admit that I do not really understand what do you mean: Of couse the tablet has been connected to an Wifi access point some time before.
I rooted the device, connected to a wifi hotspot, made your steps and connected bluetooth DUN finally. Ok, I had some tries to succeed in connecting DUN. Anyway I had the DNS problems. So what is the difference to your work a round, at what point in time the wifi should be connected?
BTW: I switched wifi off before connecting bluetooth DUN.
Best regards,
Pfeffer2de.
pfeffer2de said:
Hi neatfires!
I have to admit that I do not really understand what do you mean: Of couse the tablet has been connected to an Wifi access point some time before.
I rooted the device, connected to a wifi hotspot, made your steps and connected bluetooth DUN finally. Ok, I had some tries to succeed in connecting DUN. Anyway I had the DNS problems. So what is the difference to your work a round, at what point in time the wifi should be connected?
BTW: I switched wifi off before connecting bluetooth DUN.
Best regards,
Pfeffer2de.
Click to expand...
Click to collapse
I can't remember all the details now, but the post says that you need to connect to a wifi, and then DNS works until the reboot, so it must be true . Anyway, try this:
1. fill in a valid DNS host in resolv.conf
2. connect to a wifi network, make sure you can reach internet
3. disconnect from the wifi network, but don't turn off the wifi
4. connect through the DUN
If it works, try doing the same but turn off the wifi. I can't remember currently if I had to have wifi on or off (I think I didn't), but this is the only thing I can think of.
Almost working, bit missing on
neatfires said:
I can't remember all the details now, but the post says that you need to connect to a wifi, and then DNS works until the reboot, so it must be true . Anyway, try this:
1. fill in a valid DNS host in resolv.conf
2. connect to a wifi network, make sure you can reach internet
3. disconnect from the wifi network, but don't turn off the wifi
4. connect through the DUN
If it works, try doing the same but turn off the wifi. I can't remember currently if I had to have wifi on or off (I think I didn't), but this is the only thing I can think of.
Click to expand...
Click to collapse
I tried it on my Motorola Atrix 4G which doesn't support 'reverse DUN' as such and I had to use my GPRS phone due to data plans reaching limits on Atrix 4G.
OK, here is original '3gchat' file, I just filled in releavant APN
--------------------------------------------------------------------------
#!/system/bin/sh
exec /system/bin/chat \
TIMEOUT 5 \
ECHO ON \
ABORT '\nBUSY\r' \
ABORT '\nERROR\r' \
ABORT '\nNO ANSWER\r' \
ABORT '\nNO CARRIER\r' \
ABORT '\nNO DIALTONE\r' \
ABORT '\nRINGING\r\n\r\nRINGING\r' \
'' AT \
OK ATH \
OK ATE1 \
OK 'AT+CGDCONT=1,"IP","<APN>","0.0.0.0",0,0' \
OK ATDT*99***1# \
TIMEOUT 22 \
CONNECT ""
----------------------------------------------------------------------------
It hangs at $ exec /system/bin/chat \ 'Permission Denied'
If i delete above line (exec /system/bin/chat \ ) from 3gchat, it connects and remain conencted to BTDUN to my GPRS phone until I diconenct it, however there is no data. Following is after deleting line "exec /system/bin/chat \ "
-----------------------------------------------------------------------------
#!/system/bin/sh
TIMEOUT 5 \
ECHO ON \
ABORT '\nBUSY\r' \
ABORT '\nERROR\r' \
ABORT '\nNO ANSWER\r' \
ABORT '\nNO CARRIER\r' \
ABORT '\nNO DIALTONE\r' \
ABORT '\nRINGING\r\n\r\nRINGING\r' \
'' AT \
OK ATH \
OK ATE1 \
OK 'AT+CGDCONT=1,"IP","<APN>","0.0.0.0",0,0' \
OK ATDT*99***1# \
TIMEOUT 22 \
CONNECT ""
---------------------------------------------------------------------------------
Infact, there wasn't any /system/bin/chat directory so I created one to comply with 3gchat sript. Yet above permission denied issue remained, until I deleted the "exec...." line.
I found someone adding follwing line in the shell script file connecting his chat file to /usr/sbin/chat :
connect '/usr/sbin/chat -v -f /etc/ppp/<chatfile name>'
Above quotes /usr/sbin/chat while '3gchat' script uses /system/bin/chat.
I am missing something here.
One a side note, I tried BlueVPN from the marked which worked.
UPDATEver
OK I installed BlueDUN on my Xolo X900 (which doesn't support reverseDUN, i.e. it doesn't natively support Bluetooth Dial-Up Modem profile, butr it can dial-up other Bluetooth Dial-Up Modems, i.e. other phones). This software enabled Xolo X900 to become a software Bluetooth Dial-Up Modem (as it natively doesn't have this feature like most android devices)
On another anrdoid device (Atrix 4G) I installed BlueVPN (please note this becomes almost mandatory somehow as until target phone natively supports reverseDUN, other btDial-Up softwares will not be able to detect (via sdptool) target phone until it has native reverseDUN (Bluetooth SPP per say). Then removed old pairing and repaired both devices again. After that, the most importatnt is to swicth on WiFi Tethering on target phone (in my case Xolo X900) and connect host phone (Atrix 4G in my case) to the WiFi Tether of Xolo X900. Whie WiFiTether is active, start BlueDUN on target phone (Xolo X900) and then start BlueVPN on host android device (Atrix 4G). This will make a working internet connection and you will be able to connect it via VPN setup. After net is connected you can turn off WiFi tethering and switch off wifi on both devices. WiFi thethering is required initially till internet starts working as it sorts out DNS issues.
As long as target phone is 3G or 4G, speed is not a problem. I am usining this BlueDUN + BlueVPN combo to post this.
I am resolved that BT tethering method of OP will not work in my setup wihout setting up VPN because I have been able to establish connection but still couldn't get any net traffic.
For the record, its not android that "hates tethering" - its the carriers that block, disable, or remove those capabilities, because they want to charge you more for the same service based on what device (eg your laptop) you use it with.
Hi everyone, as the title suggests, I have problems with the hotspot of my rooted Pocophone F1, MIUI Global 11.
It works great with other android devices, but I can't share the connection with my Lenovo Laptop with Windows 8.1.
USB tethering instead works without any problem.
When I try to connect to the Hotspot via WiFi, it returns the message "Limited", "No Internet Access".
Network Diagnostics throws up the following error message: "Windows can't communicate with the device or resource (Primary DNS Server)."
I have a full strength signal and I appear to be connected but there is "no internet access".
I am able to connect the laptop on the wireless of my home router with no problem.
I tried to:
1) Change the APN type to: "default, mms, dun, supl" (I also tried to insert "DUN" in capital letters)
2) Change the private DNS mode from "automatic" to "dns.google"
3) Reset all the network settings
But nothing changes, the problem remains.
Can you help me with my problem? Thanks in advance.
Any chance of getting help?
More likely a windows issue. Get help from google.