I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
you need a jtag.If it wont go into download or recovery its gone.
What do you, Jtag? I've got a usb jig, does that work? Or are they the same thing?
*What do you mean
aren't jigs phone-specific?
Any new info on this? Did jtag worked or whatever. I keep eye on this thread but looks like OP disappeared. Genuinely curious what happened with the phone.
Hmm .. very wierd that phone wont turn on ... i have broken Odin flashes purposedly many times myself but always I can get back into it ...
You could try power drain ... remove battery ... press power on button for 10 seconds (WITHOUT BATTERY IN) ... now put battery back in and try to go into Download mode.
Sorry but i got busy with other stuff but wanted to explain to him about the JTag.Its a special box called a RiffBox JTag and what it does is basically wipes the motherboard/bootloader and in most phones repears the bootloader aswell of a fully bricked phone so it can be put into download mode again letting you re-flash via Odin and thus saving your phone.A little miracle that means no more bricked phones.There doesnt seem to be that many around and to buy they aint cheap at all but if you can find a dealer or a phone shop who has one they can do it for you.For example.I bicked my phone and was going to buy the box on ebay.es imported (in spain there isnt any for sale) for 160euros complete or 140 without cables.Searched this site:
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
and found a shop in Barcelona who did it for me for 35euros plus postage "BARGIN!!!!".If you search youtube and google for RiffboxJtag in your country you should find someone with a unit willing to help out or check the link ive given as it has a list of users worldwide.
EDIT:A jig is not a JTag.A jig will boot your SEMI-BRICKED(phone showing some kind of life ex.classic icon of phone/arrow/computor,menu and back arrow lights work e.t.c.) phone into download mode.A FULLY-BRICKED(dead,no signs of life.wont start.no download,recovery,lights nothing.DEAD!!!) phone needs a JTag
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Devourz said:
@cooza , Thanks for that explanation and site I even found one near me, that some day might come handy.
I must ask now to further clear my doubts, this riffjtag box, like you said is able to "revive" or "unbrick" _any_ bricked SGS2? No matter how bad is it? Im kinda new around these things and trying to suck up as much info/knowledge possible, before I decide to flash/root/?brick? xD haha ( hope not for last one) my phone.
Click to expand...
Click to collapse
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
SamBroomby said:
I think I've bricked my Galaxy S II.. I got it yesterday and tried to flash 2.3.5. When I was flashing with Odin, the program went unresponsive and crashed. There was nothing else to do but take out the battery.. I shouldn't have done it, but I did. And now it won't turn on at all. I've tried the 3 button method, for download mode, and a jig from my old i9000. Nothing has worked. The screen wont even turn on. I don't know what to do... Help Please??
Click to expand...
Click to collapse
im not juding you...but next time is better to flash with CWM.
Odin only for root kernel...
cooza said:
Hi.As i said before there are semi and hard bricked phones.A semi bricked phone can normally be booted into download mode with the 3 button combo or a jig and your away again.It has the usuall symbol of a phone and a PC with a warning sign in the middle of them.Hard bricked is when the bootloader is damaged and there is basically no return.You got yourself a very expensive paper-weight for the office desk.Its like trying to turn on your phone with no battery in it.Dead,gone and not coming back.Before the Riffbox the only solution was the rubbish bin or maybe change the motherboard(but a few years ago that was an extremely pricey task if possible).Now we have the box.You can screw you phone to the point of no return and still the box will bring it back to life as it wipes the motherboard and in the case of the SGS2 also repears the damaged bootloader which is what boots your phone to start with.One thing to know,and i dont know if it happens to everyone but mine came back with 2.3.3 installed but there was no recovery mode.If this happens all you have to do is re-flash via Odin a more reciente firmware WITHOUT PIT FILE and yourll get recovery mode back at reboot.Obviously youll need to plug in your phone before hand to re-install the drivers.Same with Odin.boot to download,plug in,installs,unplug,then open Odin and flash.
EDIT:yourve got my name there so if something ever happens and you need a hand to re-flash after a jtag just send me a private message.Here to help.
Click to expand...
Click to collapse
Thank you mate! I am getting my SGS2 this week so ive been doing alot of reading and research about everything. Thanks for your contribution and kind offer to help if ever comes to that. Very appreciated.
No worries mate.truth is its very hard to fully hard-brick an i9100.The main thing to watch out for,and its a mistake that first-time users/flashers have done,is to flash there i9100 phones with i9000 firmware by mistake.An SGS is not an SGS2 and if they are mixed you WILL hard-brick your device.Here on XDA everything is clearly marked and on their right pages so you cant go wrong if you take your time dont rush-in.But just in case you havnt seen it heres the thread:
Firmwares:
http://forum.xda-developers.com/showthread.php?t=1075278
CF-Root Kernels: (if you feel the need)
http://forum.xda-developers.com/showthread.php?t=1103399
Hi, dont bother faffing with it mate, if you have only had it a day take it back and tell them it wouldnt boot after an automatic Kies update. If they cant turn it on they wont know you bricked it until it gets back to the factory and to be honest after selling 10 million of these babies they wont even bother checking it out, they'll just put it into spares or straight recondition it.
I did the same thing to my xoom, PC world couldnt turn it on so they just gave me another.
Related
So I had previously rooted my SGSII, and decided to try installing CM7 on it. I used CWM Recovery and ran it off the SD card, and everything appeared to work fine. I think I had a bad/not fully functioning CWM or something, as it didn't list an option to backup anything (I'm guessing because I flashed the stock kernel after rooting?) Anyway, it will no longer boot. I can access download mode, but Odin fails everytime I try to flash anything back on there. When I try to boot my phone, I just get a "Firmware upgrade encountered an issue" error.
EDIT: I just tried again as I was writing this, after rebooting, reinstalling my drivers and rebooting my computer. I was able to get the Firmware to flash properly in Odin. Now I have my phone booting and getting stuck on the "Samsung Galaxy SII GT-I9100 splash screen... Doesn't seem to go any further than that though, unfortunately.
Any ideas what I can do? Is it possible that I need re-flash a bootloader or something ??
Any help would be supremely appreciated!
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
As long as you can get into download-mode, your phone isn't bricked.
If you switch from or to a TouchWiz-based ROM, you have to do a full-wipe in the recovery.
Sent from my GT-I9100 using XDA App
Go back to stock first via download mode via odin
Nah you're good. Similar thing happened to me at my first flashing attempt. Get your stock firmware from Intratech's thread, put the phone into download mode & flash the firmware via Odin.
Then maybe have another go at rooting the phone with the matching CFRoot kernel.
Porkchops said:
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
Click to expand...
Click to collapse
yes, if you can still go in download mode it's no so difficult..this "small brick" it's on of "Android things to do" once in your SGS2 life
Hi guys. I'm in a worst situation. As my phone after a failed ODIN downgrade from Android 2.3.6 to one stock kernel is completelly dead - it doesn't boot anymore - not even managed to put it back into download mode or revert to fact defaults (no keys, no lights not even battery charging displayed when pluged in) - tryed the USB jig also. Nothing worked.
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
This is the short story because I would bore you to discuss all the things I have been through - it was only my faoult out of stupidity
HELP!
I don't see why Samsung wouldn't fix it ? As to how much they'll charge you, I think you'll find that will vary from country to country (labour costs being variable, etc). No, I don't think you'll be able to have it repaired under warranty.
You might want to look at having it JTAG repaired by someone other than Samsung. This will possibly be cheaper than having Samsung repair it. Do a search on here/Google.
alexdonc said:
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
HELP!
Click to expand...
Click to collapse
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
I'm sorry it's going to cost Alex. A difficult thing to happen, I know
Here's a link for a JTAG repairer in the US who is also a member here, tho I see you've already found one. I'm sure doing it this way will be cheaper/probably faster than having Samsung do the repair as well.
alexdonc said:
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
Click to expand...
Click to collapse
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Yeah I've seen a report or two on here from people who have used his service & have been happy. Must admit I found his page when thought I'd bricked my phone after my first flash attempt messed up. Yeah you might be able to get it done cheaper somewhere local, and that will mean less time without the phone for you without the phone in mail from you to the US & back again.
Let us know how you get on, your experience will be a good guide for people in future who have the same problems as you.
No probs man, happy to give you the little help I did. You too Alex Hope you have a great year & you get your phone back & working soon
alexdonc said:
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Click to expand...
Click to collapse
Hello again. Solved right now. The service didn't charged me at all - I was kind of lucky after all. Unfortunately there are still some issues I have from the start. I'll keep on digging - software related.
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
Well i was flashing a few different roms to test and see which one i liked better and when i went to flash back to the stock rom, accidentally clicked on the wrong thing and it just hard bricked my sgp
It wont turn on at all. The charge logo doesn't even show up when you plug it in. I just need to know if there are any ways i can fix this.
happened to me too. the roms/file systems/procedures that are available for the 4.0 US are not infallible and can lead to a soft/hard brick.
the full restore appears to be faulty too, however it's quite possible that a working full restore might be available soon.
unfortunately, that leaves you with a well & truly dead device right now.
if you can get a warranty repair from samsung; well and good. I was able to return mine to the store and got it replaced - no questions.
to anyone else: wait for a working full restore.
I saw a video on youtube of a USB "jig" that plugs right into the player (or any samsung phone, I believe) that they claim will recover from hard bricks to download mode so you can reflash. Check around youtube or maybe here somewhere apparently its just a resistor connected to certain pins on the usb connector.
I just ordered a usb jig yesterday and when I get it ill tell you if it works. This is where i got it, its supposed to work for the galaxy player.
Its only $5.50 : usbjig (.) com Just take out the '(' and ')' in the link and it will take you to the website.
The same thing happened to me. What you need to do is instead of spending money on some device which is most likely a scam, you can just go into download recovery and flash from there. You said that you had been flashing roms before so you must have some experience with Odin or Heimdall. To get into download mode you need to power off your player, then hold the up-volume button while turning it on until a yellow triangle with a little android guy in it. Hook it up to Odin or Heimdall, by the way, I have no experience with Heimdall so I cannot really help you with that if thats what your using, and flash a different or a recovery rom to your device. May I suggest Klins Klassic R5 with SteveS custom kernel R3?
RexKyle said:
The same thing happened to me. What you need to do is instead of spending money on some device which is most likely a scam, you can just go into download recovery and flash from there.
Click to expand...
Click to collapse
First of all, the jigs that people have made or purchased have worked in countless situations and are well documented in this forum. Scam? I don't even know where to go with that. In my case both CWM and Recovery Mode were inaccessible without the jig. For less than $5 I was able to recover my device.
nelsona96 said:
It wont turn on at all. The charge logo doesn't even show up when you plug it in.
Click to expand...
Click to collapse
Try to get into download mode. If you can't get into download or recovery then picking up a jig isn't a bad idea. I was devastated when my Galaxy Player 4.0 seemed dead in the water but the jig got it to where I could connect it to my laptop and flash a recovery kernel, rom, and fortunately, a bootloader.
This is my experience
OP, do NOT copy what I did. What happened to my device does not look in any way similar to what happened to yours. I am linking my thread SOLELY to illustrate how much information I had to cough up to assist the fine folks of XDA to guide me towards a fix. XDA is awesome. Help them so that they can help you.
When i said hard bricked, i meant that you cant do anything with it. It wont boot into recovery or download mode. But i already ordered the jig, like i said ill post on here if it works or not.
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!
Hi Everyone,
I have an old I9100 which is bricked since a long time. If I remember correctly, it was due to a failed Odin flash.
The phone is black, no bootscreen, no recovery, no download.
When I tried to charge it, nothing either, after some time, the phone gets really hot near the camera on the back, but nothing else.
Do you know if there is a way to save the phone via a JTAG or something like that or if I will have to change the motherboard if I want to use it ?
Thanks,
Arkandias05 said:
Hi Everyone,
I have an old I9100 which is bricked since a long time. If I remember correctly, it was due to a failed Odin flash.
The phone is black, no bootscreen, no recovery, no download.
When I tried to charge it, nothing either, after some time, the phone gets really hot near the camera on the back, but nothing else.
Do you know if there is a way to save the phone via a JTAG or something like that or if I will have to change the motherboard if I want to use it ?
Thanks,
Click to expand...
Click to collapse
No man. The phone's hard-bricked. You need to get the mother board changed in order to get it working.
Regards.