I took the liberty of rooting my Galaxy II I777UCKH7 rom then deodexed the system and framework.
After you install the CWM recovery kernel from codeworkx you can flash this.
it has root and superuser 3.0.
DOWNLOAD HERE
join us on IRC #sgs2-att irc.freenode.net
download this if you do not want to have the whole system app and framework deodexed
Flashable Root
Figured I'd see this up here ha keep up the good work.
Your download doesn't work.
Phone: AT&T SGS2
Running: CM7
Seems to be working well for others
Yea my xda app is jacking up
Phone: AT&T SGS2
Running: CM7
Issue
I get "E:signature verification failed" in rom manger when I try to install. I flashed the new kernel then downloaded rom manager from the market and booted into recovery.
FYI on your download link "ATT-deodex-Rooted-stock.zip", the "ATT-de" part is a separate link that gives you a 404. The other part lets you download.
Can someone upload a deodexed mms.apk ?
Thanks
Sent from my GT-I9100 using xda premium
alton987 said:
I get "E:signature verification failed" in rom manger when I try to install. I flashed the new kernel then downloaded rom manager from the market and booted into recovery.
Click to expand...
Click to collapse
dont need rom manager. you shouldn't boot recovery from rom manager
use the button method.
mcorrie1121 said:
FYI on your download link "ATT-deodex-Rooted-stock.zip", the "ATT-de" part is a separate link that gives you a 404. The other part lets you download.
Click to expand...
Click to collapse
thanks, fixed the link
PAulyhoffman said:
dont need rom manager. you shouldn't boot recovery from rom manager
use the button method.
Click to expand...
Click to collapse
Can u? (mms.apk)
Sent from my GT-I9100 using xda premium
PAulyhoffman said:
I took the liberty of rooting my Galaxy II I777UCKH7 rom then deodexed the system and framework.
After you install the CWM recovery kernel from codeworkx you can flash this.
it has root and superuser 3.0.
DOWNLOAD HERE
join us on IRC #sgs2-att irc.freenode.net
Click to expand...
Click to collapse
Tried this...touch screen does not work...it boots up but the screen is unresponsive.
My screen and others are working fine?!
Screen is working here.
I haven't. Tried this rom yet but when I plug in the charger tje screen is unresponsive anyone else
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
mastergrillo said:
I haven't. Tried this rom yet but when I plug in the charger tje screen is unresponsive anyone else
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Click to expand...
Click to collapse
Some charger/AC outlet combos do that. Had that happen on my Infuse when I plugged the stock charger into a Sears inverter in my car.
I tried it and it worked. The only problem for me is that wifi does not work. Im going to try and reflash.
PAulyhoffman said:
download this if you do not want to have the whole system app and framework deodexed
Flashable Root
Click to expand...
Click to collapse
I did this - seemed to work fine. On a reboot now I get the warning yellow triangle below Samsung Galaxy S i900. Is this what Im supposed to see?
godzulu said:
I did this - seemed to work fine. On a reboot now I get the warning yellow triangle below Samsung Galaxy S i900. Is this what Im supposed to see?
Click to expand...
Click to collapse
yes, it means you've flashed a non-samsung image to your phone.
boondoc said:
yes, it means you've flashed a non-samsung image to your phone.
Click to expand...
Click to collapse
Thanks, its what I thought. Just wanted to make sure
Sent from my SAMSUNG-SGH-I777 using xda premium
Related
I have stock 2.2. Can I flash a rom to it and how?
Sent from my SGH-T959 using XDA App
You can do a couple of things...to have it work with 2.2.
-Odin a Voodoo integrated kernel
-Odin CWM(not sure about this)
OR
-Odin Back to stock JFD--then flash CWM via Rom Manager
You have to Odin whichever way I guess.
antoinew22 said:
I have stock 2.2. Can I flash a rom to it and how?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Is the device rooted? If not it needs to be first... start here
http://forum.xda-developers.com/showthread.php?t=954509
Read,read,read.and when you think you've read enough....read again.
There's alot to learn and before you make the plunge.....better to know something about it
Thanks. Its already rooted so do I just need to download a clockwork and do something with Odin?
Sent from my SGH-T959 using XDA App
antoinew22 said:
Thanks. Its already rooted so do I just need to download a clockwork and do something with Odin?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Here is real good info
http://forum.xda-developers.com/showthread.php?t=954509
Here you will find the toolbox works great
http://forum.xda-developers.com/showthread.php?t=849028
i need help getting the green recovery screen. its stuck on stock and keeps failing when i hit reinstall packages. does anyone know how to fix this
antoinew22 said:
i need help getting the green recovery screen. its stuck on stock and keeps failing when i hit reinstall packages. does anyone know how to fix this
Click to expand...
Click to collapse
i had the same problem yesterday...i was on stock 2.2 and after rooting i couldn't get into green recovery...so if it's the same case flash back with odin on 2.1,get rooted and flash the custom rom you want.
do u know step by step using odin to do this
Just go to the developement section of this forum and click on the tab that says "stickies".....every thing you need to know is right there. please, some research on your end will go a long ways
build a jig yourself or buy one online just in case you are in trouble:
http://cgi.ebay.com/ws/eBayISAPI.dl...78211&ssPageName=STRK:MESELX:IT#ht_723wt_1139
Everything seems to be working good except the small bug listed below. It is stock CWM and I haven't changed anything, just built it for our phones. Not sure what's up with the background as I haven't added anything?
Will flash CM9 without issues! I haven't had any flashing issues at all actually...
The .zip is CWM flashable, no fastboot needed. Enjoy!
Bugs-
Internal SD won't mount in usb storage mode.
(can still flash from internal)
Dropbox(Go easy)- http://db.tt/GvNBGK29
Mediafire- http://www.mediafire.com/?qzemoy3t86v761i
MD5- b819dcb34b48e97b3f9e2a7e6d665d0a
so im assuming this is the touch enabled version?
Flashed, its not the touch version. but everything looks to be in working order.
Only for cm7 and cm9?
or custom roms too?
mopss said:
Only for cm7 and cm9?
or custom roms too?
Click to expand...
Click to collapse
Try and find out. OP said it hasn't been completely tested yet.
Sent from my MB855 using Tapatalk
Try and find out.
Click to expand...
Click to collapse
I do not want,the му phone has only recently recovered from a brick
mopss said:
Only for cm7 and cm9?
or custom roms too?
Click to expand...
Click to collapse
Flashed jokercomplete, booted then flashed back to Initiative with no issues. The background image is nice. The menu disappears during flashing and the progress bar is hard to see (very thin and low contrast) which may make some people nervous.
I'll add it to the compendium and update the root-unlock-relock zip in the next day or so. Thanks yepitsme19.
Found a possible bug.Internal storage doesn't show up on windows computer when mounting "usb storage". Could somebody verify.
flashed on photon, works fine. I'll write if something is wrong.
http://forum.xda-developers.com/showthread.php?t=1493382
Rom Manager lets you flash CMW
Sent from my MB855 using xda premium
When you mount USB storage for access from Windows the internal SD is not mounting.
stesh725 said:
http://forum.xda-developers.com/showthread.php?t=1493382
Rom Manager lets you flash CMW
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
yea flash that version if u don't mind losing cm9 flashability
Lokifish Marz said:
Found a possible bug.Internal storage doesn't show up on windows computer when mounting "usb storage". Could somebody verify.
Click to expand...
Click to collapse
Added to OP. Working on a fix.
ranmasaotome510 said:
so im assuming this is the touch enabled version?
Flashed, its not the touch version. but everything looks to be in working order.
Click to expand...
Click to collapse
I wish I could say it was the touch recovery! But sadly, Koush hasn't released the source for it yet(If he even will)
yepitsme19 said:
Added to OP. Working on a fix.
Click to expand...
Click to collapse
check the kernel your using. make sure the ramdisk has the proper naming system for cwm
ranmasaotome510 said:
yea flash that version if u don't mind losing cm9 flashability
Click to expand...
Click to collapse
Oh ok.....yea I use cm7....cuz cm9 has a problem with Netflix and some of the other video playback problems
Sent from my MB855 using xda premium
wait, so we use ROM manager to flash ROM from SD card and select CWM 5.5.0.4 correct? I'm getting an error that isn't allowing me to "unable to open file"
CarbolDroid said:
wait, so we use ROM manager to flash ROM from SD card and select CWM 5.5.0.4 correct? I'm getting an error that isn't allowing me to "unable to open file"
Click to expand...
Click to collapse
I would just reboot to recovery and flash that way. I have always had issues using ROM Manager to flash, on every phone I've had.
Sent from my MB855 using xda premium
What's the benefit to using this version vs. Romracer's version??
ChadH42 said:
What's the benefit to using this version vs. Romracer's version??
Click to expand...
Click to collapse
Romracers recovery is modified, this is stock. Other than that? Just updated is all. I never told anyone to use it. Just putting something else on the plate, eat whatever the hell you want
Sent from my MB855 using xda premium
Still sad twrp stopped
And i miss amons rec that i used on the Evo...cwm always gave me issues on the EVO
Thx for the work
Sent from my MB855 using XDA App
lucidvtec said:
Still sad twrp stopped
And i miss amons rec that i used on the Evo...cwm always gave me issues on the EVO
Thx for the work
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I agree with all that you have said.
I m using vibrant froyo 2.2 , but it too slow and I want to move ics passion but how? Odin is not recognize my vibrant and I don't have clockwork mode.. I have e3.. And I can't install any package in recovery ..it says signature verification failed.. I can't root as well..
Sent from my SGH-T959 using xda app-developers app
LusterGFX
muhammedasim24 said:
I m using vibrant froyo 2.2 , but it too slow and I want to move ics passion but how? Odin is not recognize my vibrant and I don't have clockwork mode.. I have e3.. And I can't install any package in recovery ..it says signature verification failed.. I can't root as well..
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Why is it that you can't root?
How can I root in foyo e3 utility...
Sent from my SGH-T959
muhammedasim24 said:
How can I root in foyo e3 utility...
Sent from my SGH-T959
Click to expand...
Click to collapse
You can root by using one-click root. Worked for me.
Ok i'll .. Thanks
Sent from my SGH-T959
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Your right about passion, I personally like Schimera it's really nice and customizable. Although jellybean is the one that gave me a some-what soft brick. I made a post about it called SD card, yeah that was thanks to the jellybean rom I used. So until an actual stable jelly bean rom comes out I'm gonna try that. Also the passion one was running quite well except the GPS terribly sucked.
lustergfx said:
Your right about passion, I personally like Schimera it's really nice and customizable. Although jellybean is the one that gave me a some-what soft brick. I made a post about it called SD card, yeah that was thanks to the jellybean rom I used. So until an actual stable jelly bean rom comes out I'm gonna try that. Also the passion one was running quite well except the GPS terribly sucked.
Click to expand...
Click to collapse
The jellybean ROMs are completely stable now. They only soft brick if you didn't wipe data or flashed it from stock.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
The jellybean ROMs are completely stable now. They only soft brick if you didn't wipe data or flashed it from stock.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I always wipe data/cache/delvik everytime I flash a new rom. Plus I was on ICS schimera v2.2 when I upgraded.
lustergfx said:
I always wipe data/cache/delvik everytime I flash a new rom. Plus I was on ICS schimera v2.2 when I upgraded.
Click to expand...
Click to collapse
Well then thats another problem, its not the ROM, many people flash them without difficulty.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Well then thats another problem, its not the ROM, many people flash them without difficulty.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Weird, I got the problem a day after installing that rom, thinking it was just the rom causing this problem I switched back to earlier roms. Then odin, still not a single fix. :/
lustergfx said:
Weird, I got the problem a day after installing that rom, thinking it was just the rom causing this problem I switched back to earlier roms. Then odin, still not a single fix. :/
Click to expand...
Click to collapse
Which ROM?
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Which ROM?
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Hellybean
tried to root with odin but now screen just flashes logo..
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
iKoolkid said:
Aio toolbox works the best. Anyway, don't go for passion, its an old and obsolete rom. Try iczen on the rootzwiki forum, ICS chimera, doc masters, remics, cm9, slim ics, or a jellybean ROM. If you wanna go jellybean, you need to go flash an ICS then the jb ROM or you will be bricked. For jellybean though, try the hellybean or slim bean ROMs.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
lustergfx said:
Hellybean
Click to expand...
Click to collapse
Which build. You need to format system too. The wipe doesn't do that
Sent from my SGH-T959 using xda app-developers app
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
joeyrivGIN said:
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
Click to expand...
Click to collapse
Aio is stickied in android development, hellybean same place.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Which build. You need to format system too. The wipe doesn't do that
Click to expand...
Click to collapse
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
lustergfx said:
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
Click to expand...
Click to collapse
It did, when I had to flash it.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
It did, when I had to flash it.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Well if I would've had to the rom wouldn't probably actually install and just put me in a boot loop. Although the installation was successful.
joeyrivGIN said:
I have a GS1 4G from T-Mo, I ran ODIN 1.7, with pit file S1_odin_20100803.pit and PDA file T959UVJFD.tar, got the Green PASS, but then the phone disconnects from PC and starts flashing from Samsung Vibrant screen to all white screen..what can I do...where could i get the links for Aio toolbox..and hellybean? or what should i try? please help
Click to expand...
Click to collapse
Sorry in advance but *sigh*. This is the 4th one in a week. The TMo 4g (SGH-T959V) is NOT the same as the Vibrant (SGH-T959) . You need to flash the correct pit and PDA files for your device. They Alsop have their own threads and forums. Just search and you will find them.
iKoolkid said:
Which build. You need to format system too. The wipe doesn't do that
Sent from my SGH-T959 using xda app-developers app
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
Aio is stickied in android development, hellybean same place.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I agree. If you ever want a clean install, formatting system is one of the puzzle pieces to do so. Wiping system and data and caches is not the same as formatting them.
Anyone can download the toolbox from my signature. I have it permanently hosted there.
Kool, I am out of thanks for the day but I'll hit you up tomorrow. Too lazy to get my phone out of the other room and use the app.
lustergfx said:
Not sure exactly, and in the instructions it never required for a "format system" if you are referring to the option in Mount & Storage > Format System
Click to expand...
Click to collapse
Most OPs should state this and my ICS install guide definitely states it. Btw those videos that show the ICS and JB installs are not all they are cracked up to be. There are edited and don't include "everything" to properly flash.
Woodrube said:
Sorry in advance but *sigh*. This is the 4th one in a week. The TMo 4g (SGH-T959V) is NOT the same as the Vibrant (SGH-T959) . You need to flash the correct pit and PDA files for your device. They Alsop have their own threads and forums. Just search and you will find them.
I agree. If you ever want a clean install, formatting system is one of the puzzle pieces to do so. Wiping system and data and caches is not the same as formatting them.
Anyone can download the toolbox from my signature. I have it permanently hosted there.
Kool, I am out of thanks for the day but I'll hit you up tomorrow. Too lazy to get my phone out of the other room and use the app.
Most OPs should state this and my ICS install guide definitely states it. Btw those videos that show the ICS and JB installs are not all they are cracked up to be. There are edited and don't include "everything" to properly flash.
Click to expand...
Click to collapse
Hmm, I never thought about wiping the system, well if you insist I will do that if I get the SD card problem fixed. If not I will buy the Google Nexus S. Thanks for the advice though.
First off my English isn't perfect so its hard for me to understand how some things work.
I have a galaxy SIII I9300 4.1.1.
Can you upgrade a galaxy S3 4.1.1 to 4.2.1?
I want CM 10.1 on my galaxy S3 but i need version 4.1.1.
I once tried putting CM 10.0.0 on it but it wouldn't work, So i searched it up on google and it said i need a dutch version of Cm10.0.0 or something( My phone is dutch)( I am dutch )
If someone can help me i would realllllllyyy appreciate it. i have been youtubing and googling for a long time but cant find anything that really helps me.
So if you're that one nice guy that like to help me! Leave a post with your skype and we will talk!
Since you have an I9300, you need to be in that section. This is for the Tmobile US version T999. I will move your thread and hopefully someone in your section will be able to help you.
Good luck.
Woodrube said:
Since you have an I9300, you need to be in that section. This is for the Tmobile US version T999. I will move your thread and hopefully someone in your section will be able to help you.
Good luck.
Click to expand...
Click to collapse
Owh okay! Thanks!
From what I heard, International version of galaxy s3 is unable to get cm10 because Samsung hasn't release the hardware or software codes yet? I may be wrong or even way off but something along those lines
Sent from my Galaxy Nexus using xda app-developers app
Woodrube said:
Since you have an I9300, you need to be in that section. This is for the Tmobile US version T999. I will move your thread and hopefully someone in your section will be able to help you.
Good luck.
Click to expand...
Click to collapse
hawaiian.monzta said:
From what I heard, International version of galaxy s3 is unable to get cm10 because Samsung hasn't release the hardware or software codes yet? I may be wrong or even way off but something along those lines
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
ehhhh i think so? :laugh:
If you want to install cgm 10.1 on your S3 you can download the zip file of the latest version of the Rom and if you have already rooted your S3 you have to install that zip using the recovery.
If you haven't rooted your s3 you have first of all to root it.
Where did you read that you need a particular version of the original rom to install cgm?
Sent from my GT-I9300 using xda app-developers app
k4po said:
If you want to install cgm 10.1 on your S3 you can download the zip file of the latest version of the Rom and if you have already rooted your S3 you have to install that zip using the recovery.
If you haven't rooted your s3 you have first of all to root it.
Where did you read that you need a particular version of the original rom to install cgm?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm okay, Cant remember...
What root file do i need? this one? CF-Root-SGS3-v6.4
I have 2 odins: 1.85 and 3.07
So i root it, Put the files on my phone delete catch and all that.
Find the zip on the phone and install it?
I folllowed a other tut that said i needed gapps or something?
dragonwith said:
Hmm okay, Cant remember...
What root file do i need? this one? CF-Root-SGS3-v6.4
I have 2 odins: 1.85 and 3.07
So i root it, Put the files on my phone delete catch and all that.
Find the zip on the phone and install it?
I folllowed a other tut that said i needed gapps or something?
Click to expand...
Click to collapse
Please follow this howto to root your s3 and please double check your phone model as explained in the first lines of the first post: forum.xda-developers.com/showthread.php?t=1957273
After that you can install cgm and after gapps.
Sent from my GT-I9300 using xda app-developers app
k4po said:
Please follow this howto to root your s3 and please double check your phone model as explained in the first lines of the first post: forum.xda-developers.com/showthread.php?t=1957273
After that you can install cgm and after gapps.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
MOdel number:
GT-I9300
Android version 4.1.1
Build: JR003C.I9300XXDLIH
dragonwith said:
MOdel number:
GT-I9300
Android version 4.1.1
Build: JR003C.I9300XXDLIH
Click to expand...
Click to collapse
Okay i just rooted my phone, Which was pretty easy.
dragonwith said:
Okay i just rooted my phone, Which was pretty easy.
Click to expand...
Click to collapse
Have you used triangle away to reset the counter? it's important for the warranty!
So here you can find information about version 10.0 of cgm for i9300. Read the last posts to download the last release of the cm10 rom.
Sent from my GT-I9300 using xda app-developers app
k4po said:
Have you used triangle away to reset the counter? it's important for the warranty!
Click to expand...
Click to collapse
I'm sorry but i can you explain that?
Ill do the noob way:
Noob-proof edition through ODIN:
- Download this : http://codeworkx.de/download/cyanoge...-i9300.tar.md5
- Reboot your phone in download mode
- Put the previously downloaded file as PDA
- Don't tick repartition
- Make sure repartition isn't ticked
- Flash it
After doing that i am done>?
dragonwith said:
I'm sorry but i can you explain that?
Click to expand...
Click to collapse
Read
http://forum.xda-developers.com/showthread.php?p=22462960
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 04:36 PM ---------- Previous post was at 04:30 PM ----------
dragonwith said:
Ill do the noob way:
Noob-proof edition through ODIN:
- Download this : http://codeworkx.de/download/cyanoge...-i9300.tar.md5
- Reboot your phone in download mode
- Put the previously downloaded file as PDA
- Don't tick repartition
- Make sure repartition isn't ticked
- Flash it
After doing that i am done>?
Click to expand...
Click to collapse
I guess you have to flash gapps using recovery
Sent from my GT-I9300 using xda app-developers app
k4po said:
Read
http://forum.xda-developers.com/showthread.php?p=22462960
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 04:36 PM ---------- Previous post was at 04:30 PM ----------
I guess you have to flash gapps using recovery
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay i download installed it, Now i just press ''reset flash counter'' ?
dragonwith said:
Okay i download installed it, Now i just press ''reset flash counter'' ?
Click to expand...
Click to collapse
Yes and your counter will be 0.
Sent from my GT-I9300 using xda app-developers app
k4po said:
Yes and your counter will be 0.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ok i did it, And now i'm entering downlaod mode. And it says:
Custom binary download: No.
Does this mean it worked?
Okay,
I need to install CWM didn't that came with the root installation?
CWM is volume up home button and power button right?
Ok.. Make sure you run stock ICS rom???
If we can chat on skype it will be a lot of faster for me!
dragonwith said:
Ok i did it, And now i'm entering downlaod mode. And it says:
Custom binary download: No.
Does this mean it worked?
Click to expand...
Click to collapse
Yes counter is 0 now.
dragonwith said:
Okay,
I need to install CWM didn't that came with the root installation?
CWM is volume up home button and power button right?
Ok.. Make sure you run stock ICS rom???
If we can chat on skype it will be a lot of faster for me!
Click to expand...
Click to collapse
To boot recovery you have to use vol up + home + power. Is cwm installed?
What do you mean with stock ics rom? I don't use cm. I installed it once on dual boot but i don t use it anymore.
No i'm not at home now. Wr cannot chat on Skype i'm sorry
Sent from my GT-I9300 using xda app-developers app
i did everything. Now its loading with the cyanogenmod logo start up... It doesnt stop loading....
Hey Guys,
I have a Bell Galaxy note I7I7M with T-Mobile Modem Using on Mobilicity Network In Canada. At present, I am using Padawan V8 4.0.4 rom. Works perfectly fine but would like to try some other Custom Jelly Bean Roms. My previous attempts to flash went in vain with issues such as not able to pick up signal (on SlimBean) and not able to Call and recieve phone calls even with signals ( on Jedi Rom). I guess, probably will be a radio issue. Some one please guide me how to Flash and update to custom Jelly bean Roms.
Thanks a lot.
Cheers
osterizerblender said:
Hey Guys,
I have a Bell Galaxy note I7I7M with T-Mobile Modem Using on Mobilicity Network In Canada. At present, I am using Padawan V8 4.0.4 rom. Works perfectly fine but would like to try some other Custom Jelly Bean Roms. My previous attempts to flash went in vain with issues such as not able to pick up signal (on SlimBean) and not able to Call and recieve phone calls even with signals ( on Jedi Rom). I guess, probably will be a radio issue. Some one please guide me how to Flash and update to custom Jelly bean Roms.
Thanks a lot.
Cheers
Click to expand...
Click to collapse
Well firstly try downloading Jamie's latest preview and Chris's 29th kernel. Then try flashing that. Not sure about the service try a different modem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Well firstly try downloading Jamie's latest preview and Chris's 29th kernel. Then try flashing that. Not sure about the service try a different modem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Is it ok to flash 4.2.2 as I am still on ICS? Only two of the modem works on my device which is T-Mobile and ICS Blaze. Thanks for your reply.
osterizerblender said:
Is it ok to flash 4.2.2 as I am still on ICS? Only two of the modem works on my device which is T-Mobile and ICS Blaze. Thanks for your reply.
Click to expand...
Click to collapse
Yes the modem is fine and yeah 4.2.2 is good. Its surprisingly more stable then 4.1.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Yes the modem is fine and yeah 4.2.2 is good. Its surprisingly more stable then 4.1.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I am going to try it. Can you please guide me to chris`s thread for kernel. Unable to find it. Thanks
osterizerblender said:
I am going to try it. Can you please guide me to chris`s thread for kernel. Unable to find it. Thanks
Click to expand...
Click to collapse
Um its in the development thread go down a little bit
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Um its in the development thread go down a little bit
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Did not work?
Right here
http://forum.xda-developers.com/showthread.php?t=2147095
I'm on 4.2.2 and had to change kernel in order to have call audio. Flappjaxxx kernel is another one you could try, but it didn't work well for me.
I'm using Feb 29 build of the kernel which in the forum for my current ROM had the most feedback.
Basically just download the kernel, put it on root of sd card and boot into recovery. Wipe cache and then install zip from sd and choose kernel. When done reboot. Always make a backup just in case
This boot will take longer than usual. Don't worry. When booted, it will say something like "upgrading android" or something
After that, enjoy.
Someone please correct me if I am wrong at any point! I am fairly certain that ^ those steps are correct, but just in case
And lastly, I hope this doesn't become a "best kernel thread" try a few out if you aren't sure and see which one works best for you. I just recommend 4aces because it worked for me
Carry on all
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
thatdude02 said:
Right here
http://forum.xda-developers.com/showthread.php?t=2147095
I'm on 4.2.2 and had to change kernel in order to have call audio. Flappjaxxx kernel is another one you could try, but it didn't work well for me.
I'm using Feb 29 build of the kernel which in the forum for my current ROM had the most feedback.
Basically just download the kernel, put it on root of sd card and boot into recovery. Wipe cache and then install zip from sd and choose kernel. When done reboot. Always make a backup just in case
This boot will take longer than usual. Don't worry. When booted, it will say something like "upgrading android" or something
After that, enjoy.
Someone please correct me if I am wrong at any point! I am fairly certain that ^ those steps are correct, but just in case
And lastly, I hope this doesn't become a "best kernel thread" try a few out if you aren't sure and see which one works best for you. I just recommend 4aces because it worked for me
Carry on all
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I got installation aborted(status7 error) when flashing jamie`s rom. should I flash the kernel first and try to flash the rom and gapps? thanks
osterizerblender said:
Hi,
I got installation aborted(status7 error) when flashing jamie`s rom. should I flash the kernel first and try to flash the rom and gapps? thanks
Click to expand...
Click to collapse
Go download team win recovery project 2.4.4 I believe it is. The status 7 error is a out of date recovery. You can flash it via Odin or through your current recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
^ that
Flash kernel after ROM. Most ROMs come with a kernel in the zip, so it would overwrite any that you install. I got status 7 and decided to try a different ROM because I was too lazy to update recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
ZacksBuilds said:
Go download team win recovery project 2.4.4 I believe it is. The status 7 error is a out of date recovery. You can flash it via Odin or through your current recovery
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot Guys. @ ZacksBuilds @ thatdude02 and the developers. Its working. Made some calls and texts. Testing Chameleon @JamieD81 Thanks
osterizerblender said:
Thanks a lot Guys. @ ZacksBuilds @ thatdude02 and the developers. Its working. Made some calls and texts. Testing Chameleon @JamieD81 Thanks
Click to expand...
Click to collapse
Ok. I have a problem here. phone reboots when i touch turn on usb connection, any idea? want to flash chris kernel
That is very common for JB ROMs actually. Had that on my old phone as well... Trying to remember what I did Try a different kernel and see if that works any. I don't think it happens to me anymore but it did before.
I'm gonna spend some time searching and see what that yields. I know you can boot into recovery and enable USB transfer that way. It's supposed to be faster because it bypasses a few firmware components. But either way, that is a nuisance.
Okay, try going Settings->Storage->(Menu soft key)->USB options
From here you should be able to enable mass storage, or if that reboots on you like before, try ticking MTP. Maybe try checking developer options and see if USB debugging is enabled or not. Unfortunately I don't know which to have ticked and which ones not
Anyone? Cuz right now all of mine are unchecked (and that doesn't sound right)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app