Here is the correct way to use root explorer for manually replacing system files:
1. Mount the system as r/w (read/write) per the top right corner. Navigate to the file that you plan to replace (e.g., system/framework/framework.jar).
2. Copy (not move) the file and paste it somewhere on your SD card (internal or external, doesn't matter - as long as you can locate it in case you need to put it back). Rename the file you just pasted, but very subtly. For example, when renaming framework.jar, I would only throw something in front of the file name, such as "Backup - framework.jar", so I can easily distinguish it from the new file if I put them in the same spot.
3. NANDROID BACKUP!
4. Download/put on your sd card (whatever you do) the new file that you want to replace the old one with.
5. Move the new file to /system (not in a subfolder yet). Here you will change the permissions, which is crucial to avoid FCs and problems. In root explorer, you would long press the file, press permissions, and set them to whatever the old file's permissions are. This may require going to verify what they are before starting this step. For example, in a lot of cases, the permissions will be RW-R-R. In Root Explorer, this would mean checking the first two boxes on the first line and only the first box on the next two lines. In any situation, confirm that the permissions you see after you've changed them (right below the file name) match exactly what you're replacing.
6. Ensure that your new file is correctly named to exactly what it is replacing (case actually matters) and double check the permissions.
7. Move your new file to the folder, root explorer will ask if you want to replace the file. Confirm.
8. Back out of root explorer and immediately reboot.
No force closes, no problems .
It may seem like a lot to someone who doesn't do it often but for me, I actually do this method faster than any other and fly through it every time. I got tired of seeing people explain ways to use Root Explorer which result in bootloops, FCs, etc. without fail. So, I decided to put an end to it.
Great post Simba501! Thank you for this...
Obviously a "noob" thing I'm over-looking but when I try and paste the file I'm moving into /system it's prompting me that it's "read-only"?
Audiochild said:
Obviously a "noob" thing I'm over-looking but when I try and paste the file I'm moving into /system it's prompting me that it's "read-only"?
Click to expand...
Click to collapse
Toggle "Mount R/W" button at the top.
Audiochild said:
Great post Simba501! Thank you for this...
Obviously a "noob" thing I'm over-looking but when I try and paste the file I'm moving into /system it's prompting me that it's "read-only"?
Click to expand...
Click to collapse
Sounds like you need to mount \system as read-write. There is a button in the upper right corner of root explorer to mount
Sent from my SGH-I777 using XDA App
Thanks wonner and kbilly70! That was the issue
Awsome. Bookmarked!
thanks for the awesome guide. worked great for me!
Thanks, that clears things up.
I'm still wondering, though, how does one handle certificate files etc? For example, the ones found in this fix provided by zdzihu, in the META-INF folder.
kZard said:
Thanks, that clears things up.
I'm still wondering, though, how does one handle certificate files etc? For example, the ones found in this fix provided by zdzihu, in the META-INF folder.
Click to expand...
Click to collapse
Those are only for flashing purposes. Not needed if you're not flashing it. You only need to pull everything besides that folder and place them appropriately.
Using this method resulted in "app not installed" tried it with black Google search box, and just now with Mms.apk rw-r--r-- backed up old one, but method didn't work... had to nandroid last time because phone wouldn't let me install backup or market version. Looks like I'm in for it again. fudge. what went wrong?
System folder was r/w and moved apk into system/app said OK to overwrite and used hard key back button to exit root explorer. Hard key power button and selected reboot within 1-4 seconds of moving apk over system app.
Edgarhighman said:
Using this method resulted in "app not installed" tried it with black Google search box, and just now with Mms.apk rw-r--r-- backed up old one, but method didn't work... had to nandroid last time because phone wouldn't let me install backup or market version. Looks like I'm in for it again. fudge. what went wrong?
System folder was r/w and moved apk into system/app said OK to overwrite and used hard key back button to exit root explorer. Hard key power button and selected reboot within 1-4 seconds of moving apk over system app.
Click to expand...
Click to collapse
You don't install it after placing it. Placing it in the folder does install it. If you put it there, ensure the permissions are correct, and reboot, it should work.
EDIT: I don't see any mention of setting the permissions, so that was probably the issue. Again, no need to "install" it; just put it in the appropriate folder and set the permissions.
Simba501 said:
You don't install it after placing it. Placing it in the folder does install it. If you put it there, ensure the permissions are correct, and reboot, it should work.
EDIT: I don't see any mention of setting the permissions, so that was probably the issue. Again, no need to "install" it; just put it in the appropriate folder and set the permissions.
Click to expand...
Click to collapse
I did state the permissions. It's in your quote lol. Your method caused my phone to say app not installed. I had trouble getting the default app back after your method failed. Why didn't it work? I'm telling you I followed it to a T.
Sgs2, android 2.3.6, unnamed rom, December 2011 entropy kernel
Edgarhighman said:
I did state the permissions. It's in your quote lol. Your method caused my phone to say app not installed. I had trouble getting the default app back after your method failed. Why didn't it work? I'm telling you I followed it to a T.
Sgs2, android 2.3.6, unnamed rom, December 2011 entropy kernel
Click to expand...
Click to collapse
If the apk is compatible, it will work. At no point should you get an "application not installed" prompt, unless you attempted to manually install it at some point. If it wouldn't work, it just wouldn't appear in the app drawer: no prompt.
I guess this should be mentioned in the OP, but some times, clearing data of the application may be necessary after finishing. Usually a force stop at the most will allow you to see changes (which is why the steps include a reboot). You've piqued my interest. Post the files of question and I'll see if they work on my device. There was a similar issue someone else was having; I told him to redownload the apk and that was the problem. Some kind of botched file/download.
Sent from my Galaxy S II (i777)
can you edit or create new folders in the /sys directory?
mikoal said:
can you edit or create new folders in the /sys directory?
Click to expand...
Click to collapse
No. Why would you want to?
Sent from my Galaxy Tab 10.1
Simba501 said:
No. Why would you want to?
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
just wondering what the limitations of root explorer are.
is it only that folder? and why that folder?
mikoal said:
just wondering what the limitations of root explorer are.
is it only that folder? and why that folder?
Click to expand...
Click to collapse
You can edit and create new folders in that directory, but there's just no need to, unless you want to break the functionality of your phone.
mikoal said:
just wondering what the limitations of root explorer are.
is it only that folder? and why that folder?
Click to expand...
Click to collapse
Idk: that's the only one I've seen. I've created folders in other directories. At any rate, virtually every modification you'll ever make will be in /data or /system.
dsmboost said:
You can edit and create new folders in that directory, but there's just no need to, unless you want to break the functionality of your phone.
Click to expand...
Click to collapse
It fails if attempting to create it within Root Explorer. You could use other means though (on a PC, an edited ROM zip, or potentially another root file manager). But again, no real reason to: other than for development purposes, perhaps. I'm no developer though, so I can't say.
Sent from my Galaxy Tab 10.1
Simba501 said:
Idk: that's the only one I've seen. I've created folders in other directories. At any rate, virtually every modification you'll ever make will be in /data or /system.
It fails if attempting to create it within Root Explorer. You could use other means though (on a PC, an edited ROM zip, or potentially another root file manager). But again, no real reason to: other than for development purposes, perhaps. I'm no developer though, so I can't say.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
Ah okay, I was referring to ES file explorer, which can modify other files in that directory.
thanks to you both!
Related
laymil has posted a much better script for this. As such I will be discontinuing my work on this for now. Not for any hard feelings, but because it is now beyond me to help any further.
As always I am glad to have helped the community in some small way. Thank you all
CHEERS
Geniusdog254 Posted the exact lines in the build prop that needed to be changed. This is a pretty common fix for problems like this between versions of Android. There was some concern however that you may miss some of the newer apps released only for Froyo. I wrote some simple scripts that will fix this for us.
Simply: One puts the Froyo build.prop on your phone. The other puts the modded build.prop on your phone.
Prerequisites
YOU MUST HAVE GSCRIPT INSTALLED
YOU MUST HAVE BUSYBOX INSTALLED
(IF YOU ARE USING PAULS FROYO ROM FROM HERE
http://forum.xda-developers.com/showthread.php?t=686631
IT DOES NOT HAVE BUSYBOX INSTALLED
Also--
There are now 2 downloads.
One will reboot your phone automatically
One will not!
(I recommend this one for anyone that has problems, or doesn't know ADB well.)
Installation
Code:
Download the attached .zip file
Place the "buildprop" folder in the root of your sdcard
Place both "Normal_Froyo.sh" and "Modded_Froyo" files in the gscript folder on your sdcard
Code:
Open Gscript
Press menu and select Add Script
Press Load File button
Select Normal_Froyo file
Press Save button at bottom
Repeat for Modded_Froyo file
After that all you have to do is open gscript and select which one to run.
Normal_Froyo will give you stock froyo build.prop and let you see froyo only apps
Modded_Froyo will give you the market fix build.prop
You can also create shortcuts directly on your homescreen for each script if you wish
-----------------------------------------------
I've decided to skip the update.zip, I've found no way to copy the scripts to the gscript folder on the sdcard this way.
I'm going for an app instead.
P.S. I've never written an app before, java looks like russian to me lol. So if anyone has any tips, or knows any good tut's let PM me and let me know.
------------------------------------------------
fixed no buildprop folder
added NON-autoreboot download.
buildprop switcher v0.3.zip ORIGINAL
buildprop_switcher_no_rebootv0.3.zip NO REBOOT
buildprop swticher v0.3.1.zip DOWNLOAD THIS ONE
When the file is unzipped, there are 4 files - No Buildprop folder. Now I get the part about putting the two .sh files into Gscript folder.
Do I make another folder called buildprop and put build.2.1 and build.2.2 inside?
OR
Do I put build.2.1 and build.2.2 onto the root of the SDCARD?
Dayz xx
Dayzee said:
When the file is unzipped, there are 4 files - No Buildprop folder. Now I get the part about putting the two .sh files into Gscript folder.
Do I make another folder called buildprop and put build.2.1 and build.2.2 inside?
OR
Do I put build.2.1 and build.2.2 onto the root of the SDCARD?
Dayz xx
Click to expand...
Click to collapse
So sorry lol Didn't notice until I was making the update.zip that I didn't put the other files in a folder IN the zip. Just make a folder on your sdcard called buildprop. and put them in there.
BTW testing the flashable update.zip method right now
thx, seems to work
so no more *#*#etc.. afterwards?
watercool said:
thx, seems to work
so no more *#*#etc.. afterwards?
Click to expand...
Click to collapse
Right.. the checkin service runs on each reboot. So it is not needed.
Worked just fine, but I did have to do the checkin thing. Possibly had poor signal but checkin hadn't done on reboot. Worked fine after that...
Dayz xx
followinginsanity said:
Right.. the checkin service runs on each reboot. So it is not needed.
Click to expand...
Click to collapse
Can the checkin method be used, instead of rebooting? I'd much rather switch back and forth via checkin rather than having to reboot.
Thanks.
Namuna said:
Can the checkin method be used, instead of rebooting? I'd much rather switch back and forth via checkin rather than having to reboot.
Thanks.
Click to expand...
Click to collapse
The reboot is built into the script. On my phone, if I checkin, the apps still don't show till I reboot. But show if I only reboot. If checkin alone works for you though, you can remove the reboot command from the script.
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
This worked great for me I also solved my (unrelated) prob with SlideIt by forcing the dictionary to save in the settings, so I'm no longer bothered about losing shortcuts stuff on a reboot.
Dandy!!
tested again with a second n1. works perfect! automated checkin works perfect.
Can you please post what changed in the .prop file.
Also you didn't add the video codecs in the "new" prop file
InGeNeTiCs said:
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
Click to expand...
Click to collapse
Mine did this as well, though I am unsure why just yet. Been busy all day.
Mikey1022 said:
Can you please post what changed in the .prop file.
Also you didn't add the video codecs in the "new" prop file
Click to expand...
Click to collapse
The only thing I changed from the stock to the "modded" build.prop were these 2 lines
from this
ro.build.description=passion-user 2.2 FRF50 38042 release-keys
ro.build.fingerprint=google/passion/passion/mahimahi:2.2/FRF50/38042:user/release-keys
to this
ro.build.description=passion-user 2.1-update1 ERE27 24178 release-keys
ro.build.fingerprint=google/passion/passion/mahimahi:2.1-update1/ERE27/24178:user/release-keys
I didn't add anything else to these. If you would like other things added to the build.prop files. You are welcome to edit them yourselves, or let me know what things you want changed, and I can include them.
I can make it user friendly. With descriptions for each modded line, then you can simply un-comment the options that you want.
PS: I thought I had the flashable update ready, but the update-script is giving me problems. ANYONE that wants to help please let me know. I'd really like to get this out to everyone.
InGeNeTiCs said:
I'm not sure what happened, but after following the instructions exactly, my phone crapped. It got as far as the first nexus logo (non-animated), then the buttons lit up and I got a black screen. And that's how it stayed.
Any ideas?
Click to expand...
Click to collapse
same thing here....ANY IDEAS????????????
This is a great find, inductions were perfect and easy to follow. Not one issue getting all my paid apps back! Thank again!
JDMSirEK4 said:
same thing here....ANY IDEAS????????????
Click to expand...
Click to collapse
To anyone that can't get thier phone to boot all the way after doing this
Its not a big deal. Your phone booted. But the build.prop didn't get copied before the reboot.
If you did a nandroid before you tried it. Restore that!
If you didn't, OR you know how to use adb. Do this
Code:
adb remount
adb push [COLOR="red"]/path/to/build.2.1(or)build.2.2[/COLOR] /system/build.prop
adb reboot
I hope to have this fixed quickly.
ANYONE WHO'S PHONE WILL NOT BOOT AFTERWARDS!
Check and make sure you put the files in the right place.
build.2.2
&
build.2.1
go in
build.prop FOLDER ON YOUR SDCARD
that was the only reason I got the error, i deleted the files off my card when i was testing the flashable update.
If you still get an error. open both files in the gscript folder, and remove or comment out the reboot line. Then tell me what error you get in gscript.
So I did this and am able to see the new apps. When I reboot the phone I cannot see a bunch of old apps in my launcher. I revert to the normal script and reboot again and still cannot see a bunch of my apps. Appbrain says theyre installed and I can open them from there but no widgets or shortcuts for them Any Ideas?
r0adki111 said:
So I did this and am able to see the new apps. When I reboot the phone I cannot see a bunch of old apps in my launcher. I revert to the normal script and reboot again and still cannot see a bunch of my apps. Appbrain says theyre installed and I can open them from there but no widgets or shortcuts for them Any Ideas?
Click to expand...
Click to collapse
Are those apps moved to the SD by any chance? If so, best bet is to go to Settings>Applications>Manage Applications>Find your launcher, and force stop it. Should work after that.
dictionary said:
Are those apps moved to the SD by any chance? If so, best bet is to go to Settings>Applications>Manage Applications>Find your launcher, and force stop it. Should work after that.
Click to expand...
Click to collapse
Nope they're not on SD. I'll try the fc of launcher.
Ok it worked thank you! but my xiia widget still is not back and I'm assuming others. Anything I can do for the widgets?
Ok installed and reinstated the app. Works great thx again.
Update:
Ok after another reboot, apps don't show again. FC the launcher they come back but not the widgets.. Grrrrrr...
Hi everyone! I'm still relatively new to all these customizations that can be made on these phones, and I am curious about all these .apk files I keep seeing around. Everyone time one is posted, it says to push it to your phone to replace whatever file is there... The thing is, every time I read about it I find a new way of doing it. Some say to use root explorer, some say SGS tools app, some say to use easy installer, and I think I've even read to use ADB? I just was wondering what's the best method? Easiest method? Can you screw your phone up by replacing these files? I keep reading things like if you want to switch a camera in your ROM to a different version, just install the .apk! Or, if you want to use live wallpapers in a ROM that doesn't come with it, here is the .apk for that!
Any help is much appreciated!
Thanks guys!
tarastaryo said:
Hi everyone! I'm still relatively new to all these customizations that can be made on these phones, and I am curious about all these .apk files I keep seeing around. Everyone time one is posted, it says to push it to your phone to replace whatever file is there... The thing is, every time I read about it I find a new way of doing it. Some say to use root explorer, some say SGS tools app, some say to use easy installer, and I think I've even read to use ADB? I just was wondering what's the best method? Easiest method? Can you screw your phone up by replacing these files? I keep reading things like if you want to switch a camera in your ROM to a different version, just install the .apk! Or, if you want to use live wallpapers in a ROM that doesn't come with it, here is the .apk for that!
Any help is much appreciated!
Thanks guys!
Click to expand...
Click to collapse
You CAN screw your phone up if you do it to the wrong APK (like /system/framework/framework-res.apk, if you install a bad one, your phone won't boot, but there is an easy fix, nandroid!).
Basically all the methods do the same thing. In Android "Installing" an app is as easy as moving it to the correct location. All of these methods do just that.
The easiest way IS to probably use Root Explorer because you can rename the old one just in case, and it will handle the system read/write mounting for you. Plus GUIs are always easier.
So here's how it works: user apps go in /data/app, and system apps go in/system/app. User apps can't really mess anything up, but be careful with System ones. Live wallpapers, things of that nature usually don't hurt. Camera is ok to mess around with, too.
Edit: my ramblings are probably confusing, don't hesitate to ask me to clear something up
usually most apk files can be installed easily by transferring the file to the root of your internal sd card then go to MY FILES locate the apk file and click on it and it will ask you to install. Thats it. You can also root explorer and just place it in the system/app folder then reboot. I install all of my apks through the first way I mentioned. On my wife's Mytouch4g there is no my files so use Astro file manager. Come to think of it any file manager from the market will do. Good luck...
tarastaryo said:
Hi everyone! I'm still relatively new to all these customizations that can be made on these phones, and I am curious about all these .apk files I keep seeing around. Everyone time one is posted, it says to push it to your phone to replace whatever file is there... The thing is, every time I read about it I find a new way of doing it. Some say to use root explorer, some say SGS tools app, some say to use easy installer, and I think I've even read to use ADB? I just was wondering what's the best method? Easiest method? Can you screw your phone up by replacing these files? I keep reading things like if you want to switch a camera in your ROM to a different version, just install the .apk! Or, if you want to use live wallpapers in a ROM that doesn't come with it, here is the .apk for that!
Any help is much appreciated!
Thanks guys!
Click to expand...
Click to collapse
An apk is a specialized application file used by android (uses the same file headers as .zip files).
You are correct that there are various methods to push or move apk's to appropriate directories with in the phone. now as to which is easier or best, all methods work about the same, though there are minute differences.
If you want to move apk's into a certain directory while using a phone i find it easiest to use a file manager like root explorer that has root permissions to move apks around. keep in mind that when moving system files most often you will have to reboot for the changes to take effect with out bugs.
If instead you want to use a computer personally i find ADB to be the easiest. After installing the android sdk you will have to navigate into the android sdk directory then to the platform-tools directory within the android sdk folder. then in command prompt type " adb push <directory of file on your computer> /<directory of where you want it on your phone> hit enter and all is gravy. keep in mind that pushing/moving files to your phone using adb works the best when in recovery mode.
as to which of these operations is the best is a personal decision personally i like to use adb to move around system files and root explorer for applications.
hope this helps
Thanks guys!! Ok, so just to be sure. I'm currently running the Malice rom, and somewhere in the threads is the LiveWallpaperPicker.apk
So all I have to do is download this, place it on the root of my internal SD card, go into file manager and find it, click on it, and it will ask me to install it? It's really that easy??
Or, should I download root explorer and copy and paste it to a specific place?
tarastaryo said:
Thanks guys!! Ok, so just to be sure. I'm currently running the Malice rom, and somewhere in the threads is the LiveWallpaperPicker.apk
So all I have to do is download this, place it on the root of my internal SD card, go into file manager and find it, click on it, and it will ask me to install it? It's really that easy??
Or, should I download root explorer and copy and paste it to a specific place?
Click to expand...
Click to collapse
For that file you will need to place it in /system/app (it can't be installed normally because it's a system app). So you need something like Root Explorer
I think EStrongs File explorer is a decent free alternative, but when I tried it a couple months ago I had no luck with it so I just bought Root Explorer (good investment)
The guide in my signature touches on this, but BT has you covered. I am also a huge advocate of Root Explorer.
Just take the .apk, move it to system/apps and I reboot, but it may not be necessary... no need to click on it and select install, as BT referenced.
Thanks so much everyone! Just purchased root explorer and will try this out.
IT WORKED IT WORKED IT WORKED!!!!!!!!!!!!!!!!!!!!
After I rebooted, none of my widgets could load, but I have live wallpapers again! I love learning new stuff! Thanks sooooooooooooooooo much! You guys are the BEST!!!
Odd about the widgets. Were you able to just remove them and re-add them back?
Yep, just deleted them off my home screen and added them back again. All of them had errors saying widget could not load
Ok (after rooting) here is how I installed GApps (Market, Google Framework, etc) on the Nook Tablet, as well as the steps I took to stabilize everything...
1. Downloaded GApps package from goo-inside.me and extracted files.
2. Deleted the setupwizard.apk file from the set of extracted files (in the system\app folder).
3. Copied "system" folder from extracted files to tablet via USB.
4. Used Root Explorer to remount /system and copy files into their designated locations, and also set permissions (644) on all copied apk's in /system/app folder.
5. Rebooted.
6. Ran the market, signed in with my Google account, and downloaded/installed Superuser. Ran the binary update within the app.
7. Install any additional apps from Android Market.
8. Profit.
Known issues...
1. If setupwizard.apk ends up on your tablet you will not be happy.
2. A factory reset is recommended after installing GApps (though probably not necessary).
3. Not all apps show in the Market. Perhaps a build.prop tweak will fix this???
Enjoy!!!
this is a second good news after rooting!
anlong:
Use either wireless adb found here: https://market.android.com/details?id=siir.es.adbWireless
or use debugging toggle found here: http://code.google.com/p/secure-set.../detail?name=ADBWidget-0.2-alpha.apk&can=2&q=
^ instructions for that:
Download ADBWidget.apk
Copy ADBWidget.apk to /system/app (you can use root explorer or something.)
Add ADBWidget to your home screen
Anlog,
I was able to get SuperUser installed following the directions on the other discussion! Thanks for much for all your hard work.
Working on getting Google Apps installed right now.
Update: Well I have SuperUser on my Nook, but whenever I try to copy anything to \system\app it tells me I don't have permissions. Looks like I can't get root to actually run.
run chmod 4755 /system/bin/su
which version of Gapps do I need Cyanogen 6 MDPI?
Make sure root is fully working before you try to install GApps. Use the latest ones for CM7 (I think its from August). You need to remount /system as RW before copying the files and setting permissions. Root Explorer lets you do all of that.
All of this could be done with an ADB script as well, but I won't have time to write one today. Anyone?
anlog said:
3. Not all apps show in the Market. Perhaps a build.prop tweak will fix this???
Enjoy!!!
Click to expand...
Click to collapse
Chainfire should fix it too, and youll be able to run all the tegra 2 also.
Drewmungus said:
Chainfire should fix it too, and youll be able to run all the tegra 2 also.
Click to expand...
Click to collapse
Do not install chainfire! I just tried it and it boot-looped, had to force factory restore.
Finally figured out what was wrong initially, root does not seem to work unless you manually enter commands. Attempted market setup, for some reason it is still force closing every time. Any chance someone who got it working could upload exact files they used.
bkerk25 said:
Finally figured out what was wrong initially, root does not seem to work unless you manually enter commands. Attempted market setup, for some reason it is still force closing every time. Any chance someone who got it working could upload exact files they used.
Click to expand...
Click to collapse
What gapps did you use?
I used the cyanogen 7 universal gapps.
Well, I may have royally screwed up. I followed this tutorial, and I copied over the entire Apps folder from the gapps download. Now I get numerous force closes, and I have no keyboard! Any suggestion?
theundeadelvis said:
Well, I may have royally screwed up. I followed this tutorial, and I copied over the entire Apps folder from the gapps download. Now I get numerous force closes, and I have no keyboard! Any suggestion?
Click to expand...
Click to collapse
I ran into issues copying the whole folder over. I am currently running the google market though.
do everything one step at a time, install the googleframework first (from the directions on the kindle page), then do the market. I ran into the first time through the market would not actually connect so I rebooted the NT.
*note*
each time you reboot your NT you need to go in and what appears is toggle the usb debugging off then on, same with the "auto mount", and I did the unknown sources as well (not sure if this is necessary). It appears a reboot resets the flags and our menu isn't actually writing the settings so you have to toggle it.
Push comes to shove, start over with fresh reboot. It took me a few times (as it probably did others as well).
ok, so can someone who is patient tell me where I need to copy the system folder? help the feeble minded, please.....
JoeM01 said:
ok, so can someone who is patient tell me where I need to copy the system folder? help the feeble minded, please.....
Click to expand...
Click to collapse
lol, i have been struggling with this exact same thing. for those of us who cant fill in the blanks of the brief instructions we need an exact step by step please
suicideclown said:
lol, i have been struggling with this exact same thing. for those of us who cant fill in the blanks of the brief instructions we need an exact step by step please
Click to expand...
Click to collapse
It needs go in system/apps
Drewmungus said:
It needs go in system/apps
Click to expand...
Click to collapse
i'm copying from the system/apps directory (unzipped gapps files), to where on the nook?
I tried copying the files into several locations, but nada.
this is literally the last thing need to knock out for me to be set until the days of ported roms.
please. halp (lelu dallas, multipass).
Drewmungus said:
It needs go in system/apps
Click to expand...
Click to collapse
that part is clearly stated but using root explorer and getting it to mount doesnt seem to work properly on my device. I have root and superuser. titanium backup works fine. for some reason root explorer on es explorer says it fails every time
-1 Go download latest Gapps and extract the contents to your HD. There will be two folders, one of which is "system."
-2 In the system folder there will be more folders, one of which is "app." Inside of app are all the system APKs.
-3 Detele SetupWizard.apk
-4 Now copy the app folder to the root of your NT SD card via USB.
-5 Next step you need to use ADB or Root Explorer...I used Root Explorer.
-6 Open root explorer, then go to sdcard and you should see the APP folder you copied.
-7 Once there, hit menu -> multi select > then put a check mark to what you want copied then hit the copy button.
-6 now hit back untill you're back in the root
-8 Then navigate to system, and at the top you should see button "Mount RW" hit that button.
-9 Then go into the App folder, and hit paste.
-10 All the selected APKs are now in the system/app folder.
-11 Now you need to give each of the copied apps permission by long-clicking on it till a menu comes up, hit permissions, then check all the check boxes next to "Owner"
-12 After you did that to all the apps hit the "mount RO" button on top of the screen
-13 Reboot the NT.
That should do it...hopefully I havent missed anything.
Guys,
I can't post in the official thread here:
http://forum.xda-developers.com/lg-g3/development/guide-headphone-speaker-volume-booster-t2819821
But I just wanted to confirm that if you root your device and follow the directions here, I've got confirmed working on the Sprint LS990 variant of this phone. The thread mentions nothing of this on Sprint or the LS990 but I can confirm that it is indeed working.
You'll need to:
1. Have root with SuperSU installed
2. Install Root Browser and 920 Text Editor (Available in market for free)
3. Navigate to system/etc and then mixer_paths.xml
4. Change file permissions to rw-r-r
5. Save to your downloads folder just in case you trash your phone or something
6. Navigate to markers mentioned in thread link above. The LS990 variant will have aforementioned markers listed approximately 15 lines later in the code. Edit them to your liking.
7. Save, reboot, pray not to get caught in limbo.
8. Enjoy having better sound than everyone else with a phone.
Just an FYI anyone attempting this: If you do not edit the permissions correctly when overwriting the file the phone will not boot. It will get stuck at the yellow sprint screen and you will have to preform a reset.
Root browser did not allow me to change permissions correctly and when going quickly I did not notice it when overwriting.
However, second attempt after recovery it worked great.
Thanks for the info TROPhouse
So i havnt edited yet but permissions look right here. Will they change after I edit and save. And then change them back right. I don't wanna get stuck since we have no custom recovery yet.
Did it. It was way worth sweatin through the reboot process. Haha.
Has anyone thats using Viper used this mod?
Sent from my LGLS990 using Tapatalk
sinisin said:
Has anyone thats using Viper used this mod?
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
I'm using viper. Works perfect. After installing I moved the app from data/app to system/app. Heard people were having it being stopped after using it for awhile and this was there fix for that.
Kept having permission issue and was kind of nerve wrecking with no recovery.... However, phone sounds awesome now!
stagejuan said:
Kept having permission issue and was kind of nerve wrecking with no recovery.... However, phone sounds awesome now!
Click to expand...
Click to collapse
What settings did you end up with. I used 68 or 69 on all mine and it's pretty good. Not sure if I want it louder or quieter but it's definitely way better than stock was.
delete
Mahapederdon said:
What settings did you end up with. I used 68 or 69 on all mine and it's pretty good. Not sure if I want it louder or quieter but it's definitely way better than stock was.
Click to expand...
Click to collapse
I did 69 which seems perfect to be honest... I mainly hear music at the gym and usually use soundcloud... at 69, I don't even get close to full volume on the phone now. Its perfect
it seems like there are another few steps in this process that aren't being mentioned, like how to save the mixer_paths file because following the instructions and updating the lines I want to update then trying to save with 920 text editor ends with the message that it's a read only system file.
Anyone care to fill in the blanks as to how you get the update to stick?
thanks!
Super loud
Thanks! Great volume!:victory:
dk2463 said:
it seems like there are another few steps in this process that aren't being mentioned, like how to save the mixer_paths file because following the instructions and updating the lines I want to update then trying to save with 920 text editor ends with the message that it's a read only system file.
Anyone care to fill in the blanks as to how you get the update to stick?
thanks!
Click to expand...
Click to collapse
Don't know if this is too late to help, but...
I don't use 920, but my guess is there's an option somewhere (probably in settings for the app) to switch the file system to read - write mode, instead of read-only. I use the FX app, and that's what I had to do with it. Be sure to set it back to read-only when you're done.
dk2463 said:
it seems like there are another few steps in this process that aren't being mentioned, like how to save the mixer_paths file because following the instructions and updating the lines I want to update then trying to save with 920 text editor ends with the message that it's a read only system file.
Anyone care to fill in the blanks as to how you get the update to stick?
thanks!
Click to expand...
Click to collapse
SUCCESS!
So you need to download an app that will mount your system, I used an app called mount/system. You launch it then select Mount r/w. Once you do that you have the needed access to edit the files as listed. I used this guide as well and had success....hope this helps others!
copy the original mixer_paths to your memory by ES file
edit it by notepad++ on windows and put it again in your memory
copy it from internal to your /system
highlight it and set permissions rw r r
move it from /system to /system/etc/
reboot and enjoy
Has anyone tryied playing with bluetooth volume i cant find where to change it any sugestions?
Nice, I haven't had any issues with my phone being too quiet, but I also came from a Verizon G2. Those were noticeably horrible for volume levels, so the G3 is a welcome change.
In regards to all the questions about which app to use for which function:
You could use Root Explorer, or any other file explorer that has root capabilities (ES File Explorer, Total Commander). You do NOT need to use a specific app set and if your file explorer can't mount/unmount the system partition with root permissions, try a new one because that one sucks.
You also should not be downloading three separate apps to accomplish this. It's kind of overkill to have a file explorer, a text editor, and a system partition mounter when any decent file explorer has all three of those built in. I think ROM Toolbox even has all those capabilities in the free version.
RandomPooka said:
Nice, I haven't had any issues with my phone being too quiet, but I also came from a Verizon G2. Those were noticeably horrible for volume levels, so the G3 is a welcome change.
In regards to all the questions about which app to use for which function:
You could use Root Explorer, or any other file explorer that has root capabilities (ES File Explorer, Total Commander). You do NOT need to use a specific app set and if your file explorer can't mount/unmount the system partition with root permissions, try a new one because that one sucks.
You also should not be downloading three separate apps to accomplish this. It's kind of overkill to have a file explorer, a text editor, and a system partition mounter when any decent file explorer has all three of those built in. I think ROM Toolbox even has all those capabilities in the free version.
Click to expand...
Click to collapse
Agreed but I downloaded ES File Explorer and several others and I was unable to find the ability to mount as r/w. If the option is in those apps, it's very much hidden so an app to mount your file system then an editor was what I needed and it worked.
dk2463 said:
Agreed but I downloaded ES File Explorer and several others and I was unable to find the ability to mount as r/w. If the option is in those apps, it's very much hidden so an app to mount your file system then an editor was what I needed and it worked.
Click to expand...
Click to collapse
ES's current interface does hide a lot, and is in almost every way inferior to the original interface. But the option is there. It's also in FX (File Explorer) which is my root editor of choice.
the pursuit of sound quality! bullet for my valentine cant be heard on stock!!!!!!!
tried this. guess i messed up. stuck on spark screen. sat and read through the pages here. gotta fix my phone when i get home tonight.
what did you change you volume levels to?
So can those who have successfully made the edits share what volume levels you changed and what are the new numbers? I've made the change to mine and even with my $100 earphones there's distortion at what I feel is a low level. I'm thinking maybe there's a balance among these that I need to achieve?
thanks!
dk2463
hello fellow xda junkies!
HERE IS A SIMPLE WAY TO GET DATA TETHERING THROUGH BUILD.PROP EDIT
NOTE:MESSING WITH BUILD.PROP COULD MESS YOUR PHONE UP BE CAREFUL
Step 1.) download a text editor.i suggest 920 text editor.
Step 2.) you will also need an root explorer so download that also.
Step 3).open up your root explorer and navigate to system/build.prop. and copy that file to another directory. i.e example sdcard/download.then rename
original build.prop file to build.prop.bak
Step 4).open up your text editor and navigate to the directory where you copied the build.prop file
Step 5.)look for this line [they are both close to the end of the build.prop file] "net.tethering.nonprovisioning=true" [once you find it change the true
to false] so it reads "net.tethering.nonprovisioning=false" NOTEDO NOT TYPE THE QUOTATION MARKS!!!
Step 6.) " look for line "persist.data.tethering_oc=1" change the variable 1 to 0 so it reads "persist.data.tethering_oc=0
Step 7.) move the build.prop file that you copied and edited from location you placed it in to its rightful spot in system/.change permissions to rw--r--r
reboot phone and your good to go!works on my vs985 LIKE A CHAMP.
deathsquad737 said:
hello fellow xda junkies!
HERE IS A SIMPLE WAY TO GET DATA TETHERING THROUGH BUILD.PROP EDIT
NOTE:MESSING WITH BUILD.PROP COULD MESS YOUR PHONE UP BE CAREFUL
Step 1.) download a text editor.i suggest 920 text editor.
Step 2.) you will also need an root explorer so download that also.
Step 3).open up your root explorer and navigate to system/build.prop. and copy that file to another directory. i.e example sdcard/download.then rename
original build.prop file to build.prop.bak
Step 4).open up your text editor and navigate to the directory where you copied the build.prop file
Step 5.)look for this line [they are both close to the end of the build.prop file] "net.tethering.nonprovisioning=true" [once you find it change the true
to false] so it reads "net.tethering.nonprovisioning=false" NOTEDO NOT TYPE THE QUOTATION MARKS!!!
Step 6.) " look for line "persist.data.tethering_oc=1" change the variable 1 to 0 so it reads "persist.data.tethering_oc=0
Step 7.) move the build.prop file that you copied and edited from location you placed it in to its rightful spot in system/.change permissions to rw--r--r
reboot phone and your good to go!works on my vs985 LIKE A CHAMP.
Click to expand...
Click to collapse
You know there is already a flash for this and an apk.
Yes i do know this but some like to do it on there own.but hey nice to meet ya!
deathsquad737 said:
Yes i do know this but some like to do it on there own.but hey nice to meet ya!
Click to expand...
Click to collapse
Just checking.
I'm a tinkerer also which is how I figured out the thermal throttling.
Nice to met you.
tech_head said:
Just checking.
I'm a tinkerer also which is how I figured out the thermal throttling.
Nice to met you.
Click to expand...
Click to collapse
Thermal daemon mitigation?is that what you are referring too?
A.L.B/E.B.B
deathsquad737 said:
Thermal daemon mitigation?is that what you are referring too?
A.L.B/E.B.B
Click to expand...
Click to collapse
Actually not.
Instead of trying to stop the thermal mitigation from working I did just the opposite, I changed the parameters on how it operates.
The file /system/etc/thermal-engine-8974.conf.
This file controls what happens to cpu speed at various temperatures.
That is what you tweak and it just works.
I also used ROM Toolbox to change the governor.
tech_head said:
Actually not.
Instead of trying to stop the thermal mitigation from working I did just the opposite, I changed the parameters on how it operates.
The file /system/etc/thermal-engine-8974.conf.
This file controls what happens to cpu speed at various temperatures.
That is what you tweak and it just works.
I also used ROM Toolbox to change the governor.
Click to expand...
Click to collapse
Wow that's heavy I don't know if I have a high enough pay grade to do that lol
A.L.B/E.B.B
deathsquad737 said:
Wow that's heavy I don't know if I have a high enough pay grade to do that lol
A.L.B/E.B.B
Click to expand...
Click to collapse
I can always get you a copy of the file.
tech_head said:
I can always get you a copy of the file.
Click to expand...
Click to collapse
Yes please I pm you
A.L.B/E.B.B
Thank you but...
First of all, thanks for the post. Although I appreciate the helpful post, my phone is now stuck in boot loop . I hate to be the one to open up an old thread but I'm freaking out at the moment due to brick fever :crying: My current setup was a rooted LG G3 VS98512b. My goal was simple, I didn't want to do anything crazy, I just wanted to enable wifi tether now I'm afraid I've lost everything... Is there a way I can get back into the storage of my phone and delete the modified build.prop, remove the ".bak" from the original and be back to the good life? Any assistance is greatly appreciated, this seemed like such a simple modification that led to such a big headache.
It sounds like you might have used an editor on your build.prop that could not handle the file size, resulting in your editted build.prop being truncated. Otherwise, maybe your permissions were left wrong. Either of these will cause your phone to bootloop.
Sent from my VS985 4G using Tapatalk
trent999 said:
It sounds like you might have used an editor on your build.prop that could not handle the file size, resulting in your editted build.prop being truncated. Otherwise, maybe your permissions were left wrong. Either of these will cause your phone to bootloop.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. I used the editor recommended in the tutorial, 920 text editor. I followed the instructions word for word, I don't know what the problem is. Maybe its because I have the newest update and this mod was for 10b???As far as the permissions, the phone asked automatically if I wanted to change the permissions. The original build.prop is still there... is there a way I can delete the modified build.prop and replace it with the original? I really wish I would not have followed this tut, it didn't seem like a popular method. There has to be a way to delete the modified build.prop right?
soundmasterx said:
Thanks for the reply. I used the editor recommended in the tutorial, 920 text editor. I followed the instructions word for word, I don't know what the problem is. Maybe its because I have the newest update and this mod was for 10b???As far as the permissions, the phone asked automatically if I wanted to change the permissions. The original build.prop is still there... is there a way I can delete the modified build.prop and replace it with the original? I really wish I would not have followed this tut, it didn't seem like a popular method. There has to be a way to delete the modified build.prop right?
Click to expand...
Click to collapse
Yes you can reflash the firmware or if you don;t want to restore to stock you can use ADB to fix the files and restore your .bak
Digital_MD said:
Yes you can reflash the firmware or if you don;t want to restore to stock you can use ADB to fix the files and restore your .bak
Click to expand...
Click to collapse
Again, thank you for the response. Do you recommend a specific method or tutorial for trying restore the original build.prop? I did search however, because this scenario is so specific I'm not sure there is an exact solution to my problem.
Again, just in case someone else can chime in, I followed the instructions on the first post of this thread (see first post for detailed info). I copied the original build.prop then changed the name of the original build.prop, edited the copy, moved it to the original directory and restarted the phone. Now my phone doesn't make it to the Verizon screen (I think it is stuck in boot loop), the screen stays black and the small led on the left corner flashes blue and green. If I can just get access to the storage I can replace the modified build.prop with the original that is still in the same directory just renamed. It seems like such an easy task but, I just don't know how to go about it I'm a somewhat of an old school tinker, I'm just now getting back into the swing of Android... Thanks in advance!!
Bump
Bump please
This is crazy... I changed 2 values in build.prop for tethering and my phone wont boot now... I didnt install a ROM, change DPI, or make any major changes WTF???
Do you have a custom recovery (twrp)?
Can you connect to your phone with adb?
If you have twrp, search the board for the startup hardware key sequence to reach twrp, else from adb do a reboot recovery.
In twrp, you can select to mount system, then go to advanced - file manager. You can delete the bad build.prop, rename the good one, then set the permissions on the good one. If your good copy of build.prop is on a PC, put it on a flash drive, and use twrp's file manager to get it into your phone.
If you have a saved copy of build.prop on your PC, you can also use adb's push command. (You may also want to look at the adb shell command. The sequence might be to open a shell, delete the bad build. prop, get the right build.prop into the right directory, then chmod the right build.prop so it has the proper permissions.)