Was attempting to flash one of the leaked samsung roms using ODIN. Only way we were able to get phone into download mode as using the ADB command line with ADB Reboot Download.
Odin saw it, we started the process. Seemed to be working, but it got stuck with a black screen for over an hour (when I flashed my Vibrant process to all of 10 minutes). We thought the phone just didn't reset, so we unplugged it and hit the power button...and the dreaded cell phone...!...PC screen came up.
I've tried all manner of trying to get into recovery/download mode with no avail. Again, we tried EVERY combination of button presses to get INTO download mode initially, but only the ADB command line method worked.
Now we cannot get past this screen. Any ideas???
SCREWED!!!! Call TMO and have them send you a new one. Nothing you can do if it is hardware locked.
That's what I was afraid of. That is what he is going to do, glad mine didn't have that happen as that ROM has my Vibrant working like it should (GPS works now!!)
I wonder if having to force download mode via ADB was an indication that this phone would have a problem with flashing anything to it??
Never had a brick as many times as I fooled with my Dash and G1. Guess it was bound to happen sometime.
if the battery pull method won't get you into download mode you're likely screwed...
- Make sure USB cable is connected to PC, but disconnected from phone
- pull battery
- hold down VOL+UP & VOL+DOWN and do not release
- insert battery
- insert USB cable into phone
If after a few seconds download mode appears, release VOL keys...and....you've got download mode...if not, it's safe to say your gonna replace the phone..
If that works, I'd also recommend using Odin3 v1.30 instead of v1.00 that most people use. Available here... http://forum.xda-developers.com/showthread.php?t=790026
Wishing you the best of luck!
Try runnin odin with NO pit or pda file. Ive been at that screen like 100 times, let me kniw what it does
You mean start ODIN and just plug in the phone?
tweak89 said:
You mean start ODIN and just plug in the phone?
Click to expand...
Click to collapse
try my steps in this post , works every time for me, to get to download mode ...
Hi All,
So, I tried to flash Cyanogen mod last night using the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide. I was coming from a BIONIX ROM that flashed fine.
Anyways, the phone went into a reboot loop in the recovery screen and I foolishly just held the power button until it stopped. When I turned it back on it was broken. That is, now all it does is display the white Vibrant logo in the middle of the screen with the smaller Samsung logo below it. If I hold the power button for about 8 seconds the screen goes black for about 2 seconds and then comes right back up to where it was. I can't seem to even turn the phone off any more. It just stays on that screen permanently unless I hold the power button, in which case the screen is off for 2 out of every 10 seconds. Yanking the battery of course turns it off, but putting it back in immediately returns it to the state I've described.
I've scoured these forums and tried every button press + battery state + cable state + SD card/SIM state combo suggested, but the phone won't go to download or recovery mode. I found one thread describing the exact same problem. The OP said he'd try a jig and then disappeared without any further updates. I'm going to try to get my friend to make a jig using one of these sets of instructions
http://forum.xda-developers.com/showthread.php?t=819551
http://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
but until then my questions is: does anyone have any experience with this problem (can't even turn the phone off)? If so, do you have any recommendations? Did a Jig work?
keep trying to get to download mode, pull battery, plug usb in to computer and to the phone, while holding both volume up and volume down pop in the battery. People have tried hundreds of times with it not working and then all of a sudden *bam* download mode.
So... my friend made me a jig and it works in that I can see the shoveling droid indicating download mode. However Heimdall/Odin won't recognize my phone. Heimdall's zadig utility won't locate the phone either, even with the cable plugged in. I'm, once again, stumped.
Just an update; I've tried Odin on three different computers, two Windows 7 (64 bit) and a Mac (with Heimdall). None of them seem to recognize the phone. Device manager on the Windows 7 machine does not update when I plug the phone in (in Download mode via the jig or not) and I can't find anything about Samsung in it anywhere. However I have installed the Samsung drivers; a few different sets I've found around the forums. I've also tried a couple utilities like the Vibrant toolbox and one click unbrick. Nothing seems to have any effect. I was so hopeful when the jig worked and got me to download mode, but now it's seeming I'm actually bricked. Has anyone seen a phone that could get to download mode but still be bricked? Oh, and I checked the cable using a friend's phone; her Mac recognized her phone using the cable. Haven't tried her phone on my Window's machines though.
Once again, any help is more than appreciated.
Have you tried to see if adb is working? If it does then try adb reboot recovery? If it works there is a file I can post for you later (is in my pc) that can restore your sbl.bin and fix your download mode problems.
Thanks for your help everyone, the problem was apparently resolved by a new cable; which is strange because the old one works for data transfers... just not for flashing apaprently. :S
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
I have a rooted i777 with SHOstock rom, I haven't updated the rom for a few months so I'm not sure which version it is.
The phone was working yesterday and it suddenly got stuck so I tried to reboot it (had to take out the battery because the power button didn't respond) but now each time I try to turn it on it is stuck on a black screen with the logo "Samsung Galaxy SII" and won't progress.
I tried to boot to recovery but it shows a screen saying "CWM-based Recovery v6.0.2.7" but it doesn't go pass the screen to show the recovery menu (it just reboots after being stuck on this screen for about a minute).
I tried to boot to download mode and succeeded, but every time I connect the device to my pc, the pc doesn't recognize it
(I tried re-installing kies, but it didn't help and probably the problem is not with the pc drivers because if I connect my wife's unrooted i777 to the pc it does recognize it).
so now I don't have clue what else to try.
any advice will be appreciated.
Make sure you have Odin v1.85 on your Windows PC. Look in the Windows Add/Remove programs dialog (or Uninstall a Program dialog) to see if you have SAMSUNG USB driver for mobile phones.
Open Odin on the desktop. Next put the phone into download mode by holding down vol + and vol - while plugging in the USB cable.
If Odin recognizes your phone, flash back to stock. I would recommend UCMD8 stock firmware, which you can get from the Download Repository.
don't know what happened to it but now it doesn't even turn on.
it's stopped turning on before I had a chance to try what you suggested.
now even if I connect it to the charger it doesn't show the charging status.
is there any other "force something" I can try?
kokoman said:
is there any other "force something" I can try?
Click to expand...
Click to collapse
Remove the battery and leave it out. Connect the USB cable to your PC. While holding down the vol- button (also try it with both vol- and vol+) but not the power button, plug the USB cable into the phone. The computer will provide the power. If this works, your phone will go into download mode. If not... you have very likely had some kind of hardware failure.
unfortunately it didn't work.
can't get it to download mode.
I'll try to leave the battery out for a longer time and try again.
should I try ordering a JTAG usb and see if it puts it in download mode or
probably my only option is to send it to mobiletechvideos?
I had the same problem, Your battery got too low. Pull your battery and leave it out for a while 15 mins or so. Put the battery back in and connect charger. Let the battery charge for a while without trying to turn on phone. The phone will not turn on with a dead battery even if it is connected to charger.
I just solved a problem that I didn't find any help with, so I thought I would post it here in case somebody else needs help out of this situation, and this is a recent and related thread.
After I pulled the battery of my i777 to test in another phone, without remembering to power my phone off first, it would only hang at the Samsung boot logo (stock UCMD8 ROM, rooted, stock recovery). Normally the Samsung boot screen shows for only about five seconds. Pulling the battery wouldn't get it to boot right. Holding Power to force a reboot didn't solve it. After clearing the cache it would move to the AT&T Rethink Possible screen once, then reboot and then again get hung on the Samsung logo screen. Also my battery was heating up a lot as it was hung.
I could get into both download mode and recovery. I tried reflashing my ROM from the stock file in ODIN since that would save all of my data IF it worked. This still didn't get it to boot past the first logo. Finally doing a factory reset on stock recovery is what solved my problem. I had to re-add my account and reload apps from scratch, etc.
Hello all, thanks for helping me out.
I did a very foolish thing. I rooted my phone and deleted a few bloatware apps that were apparently very important to the phone's functionality. I did not install any recovery software like CWM, fastboot, or anything. It was a stock phone that I simply rooted to remove a few apps. When I went to restart my phone, I found out that I bricked it. Now my phone will only enter Download Mode if I hold the up+down volume buttons and plug it in, or it will get stuck on the LG logo screen and a Security Error screen. A factory reset with the volume down + power will work, but does nothing to fix it.
My immediate issue is that when I plug my phone into the computer, the phone will recognize it has been plugged into a power source (it will either go into Download Mode if I was hitting the volume up+volume down buttons, or start trying to boot up but cycle through the LG logo screen and Security Error screen) but the computer will not acknowledge that anything has been plugged in. There is nothing new listed in the Device Manager. I have read other threads and searched around on the internet. The usual solutions are not working for me:
I have tried several other cables and computers to no avail. I have also tested my current computer/cable, and it worked for data transfer with another phone (Nexus 4)
I have tried cleaning out the contacts on the phone. They were not significantly dirty.
I have tried installing the drivers from LG and even the UniversalNakedDriver
I believe that if I could get my computer to see my phone, I could flash the stock rom back and restore it to working order via LGNPST. I know it is simply a software issue, because prior to my rooting the phone it was recognized by the computer.
Does anyone have any other solutions I haven't tried? Or is this something I need to go JTAG on?