Hi everybody
I have a Android based tablet(junpad, like flypad) that i have as a spotify player.
Now i woundering if ther is any apps that make it possible for me to use my galaxy s or laptop as a remotecontrol to change track etc, etc. have looked at Remote Web Desktop but i cant control spotify through that. And DroidMote Server does not work on the tablet for some reason.
So, is there any aps out there that fits me?
I can connect a wireless usb mouse to the tablet, but how cool is that? Would be nice with a app or something
No one knows anyting that can work?
I'm gonna drudge this up instead of starting a new thread. Same question. I would like to control Spotify from my Galaxy Tab 10.1 with my Galaxy S III...
... also same questiion....
Did you get any further with this?
It would be great if Spotify could enable an option to play music on any other device (with the same user registered).
My best solution so far is with Spot Commander; an android application which controls a spotify server on a Linux netbook.
But I'd prefer to use an obsolete Android phone - since it would use much less power - also in stand-by. Another idea - perhaps the spot commander server application (which is Open Source) could be ported to the Raspberry Pi.
Media Remote
Media Remote by appshroom works but is pretty limited.
Hey folks,
Sorry to kick up an old thread, but I was Googling around to find the answer to the question posed above and I thought maybe answering this thread would help the next guy. It seems that if you want to control Spotify on Android from another Android, you can do so using DroidRemote. The downside to doing it this way is that it uses bluetooth.
I'd really prefer a way to do it via WiFi as its' range is higher and I don't have to turn on the bluetooth radio just for this purpose, which in turn consumes my precious mAh's. It'd also be dandy if I could use my Windows box to control Spotify on Android.
This Galaxy Tab 2 will do nicely as a Spotify player but controlling it remotely would be even more boss.
Hello,
Is there any new solution to remote control Spotify on tablet from a phone ? Is there no tweak available or mod ? Even if you root your phone / tab ?
Regards.
Tamatea said:
Hello,
Is there any new solution to remote control Spotify on tablet from a phone ? Is there no tweak available or mod ? Even if you root your phone / tab ?
Regards.
Click to expand...
Click to collapse
I second this question.
I have a small Minix as my spotify player connected to my TV and surround system. I have been searching forever for a solution that will allow me to control the Minix spotify session from my Nexus7 Tablet.
Any suggestions? Please!!!!!
/Desperate!!!!!!
Hello all! My first attempt at any type of guide or help, so give me pointers if you notice a better way to go about this than what's here.
This was done by me on my Ultra that broke, but I would imagine the same works for any other device that has a Snapdragon 800, and probably earlier chipsets as well. SPMC and XBMC have documentation about the supported hardware.
Doesn't it suck when you crack the screen on your baby and she no longer responds to touch input? We've probably all been there with one device or another. But don't let that busted phone gather dust, turn it into a full fledged media center! These quad core beasts can do so much more than the phones of a few years ago. I take no credit for anything here, as I'm just passing along my experience so others can make use of a disabled phone.
I have used Plex, Chromecast, etc, but no combination of those gives me the control of XBMC, and the ability to play mostly any codecs without the need for transcoding.
A few things before I get into the steps:
1. I started with a rooted phone, but you don't necessarily need one. It just helps later on if you want more control over the device functions.
2. I recommend using the most up to date firmware possible, I am on 4.4.4 myself, using this rom here:
http://forum.xda-developers.com/showthread.php?t=2800414
3. You'll want a usb OTG cable like the one I used here, along with a cheapo wired usb mouse so you can control the phone until it is set up to work with a remote.
http://www.amazon.com/gp/product/B00871Q5PI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
4. You'll also need an MHL adapter. I used this one here:
http://www.amazon.com/gp/product/B00KPXI4S2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
5. You'll need wifi, assuming you have moved the sim to your next device.
6. You will want some form of controlling XBMC remotely. I use Yatse for Android, installed on my replacement phone and it's a godsend.
https://play.google.com/store/apps/details?id=org.leetzone.android.yatsewidgetfree&hl
Here we go.
1. Clean that busted phone up. Reset to factory settings, flash a new rom, OR just remove any non-essential apps. I only have my phone signed into Google so I can access the Play store, which you will want to do as well.
2. Install this if you are rooted. It will allow the phone to disable the screen when the MHL adapter is plugged in, saving battery and keeping it nice and dark around your TV. The wizard should guide you through a fairly simple set up. What you are looking for is for the app to disable/suspend/standby the screen when it detects MHL.
https://play.google.com/store/apps/details?id=com.nkahoang.screenstandby&hl
3. Install SPMC. This is a forked version of XBMC for Android, and frankly, it's better suited for this application. It has more features, and takes better advantage of the hardware.
https://play.google.com/store/apps/details?id=com.semperpax.spmc
4. After installing SPMC, you can use it as a launcher, meaning the phone will boot directly into SPMC. Just press home and you'll be given the option.
5. Launch SMPC, go into Settings-Services-Webserver and check Allow control of XBMC via HTTP.
6. At this point, you can now control SPMC with Yatse or another similar XBMC remote app on another device. Depending on your situation, you may still want that mouse to do a few more things before you connect to the TV.
Options Options Options
I use XBMC in my living room on a dedicated PC. My media resides on a NAS, wired via gigabit ethernet to an AC wireless router. Since I wanted to use this broken phone as a sort of satellite system in the bedroom, I set up a MySQL server on the same NAS. It can be daunting, but XBMC provides great documentation and this method makes getting your media onto the phone very easy.
http://kodi.wiki/view/MySQL
If you do not have another XBMC or do not wish to share the library between devices, skip this section.
1. If you have another instance of XBMC, give this a serious look, as both the library and the playback status will be synced among all devices. You can stop in one room and resume in another.
2. Running the current version of SPMC, and XBMC 13.2, I had no issues with MySQL, despite the warning to use the same build date.
3. If you have this type of setup, all you need to do is copy the advancedsettings.xml file you created from your original XBMC install, and paste it into the userdata folder deep inside the SPMC file structure. This is usually found inside sdcard/Android/data
4. Once you do this, launch SPMC and your existing library will be there.
5. I have not tried this, since I went through the trouble to set up MySQL before, but you can alternatively use Media Browser 3 to serve up your library, and it does appear
to be easier to set up. Download the XBMB3C plugin inside XBMC/SPMC to allow for this.
http://mediabrowser.tv/download/#server
Add Media
Alternatively, you can navigate to videos inside SPMC, select files, and then choose Add Source to add your media from wherever to your new library. There is lots of documentation over at the official XBMC site, so go there if this is your first foray into this type of thing.
I've found that I just have to turn the phone on when I walk into the bedroom, and it will boot directly into SPMC. From that point I can use Yatse on a different device to control the media center. When I am done watching content, the shutdown option inside Yatse will shut the phone off, and it just goes into a powered down charging state.
Mostly everything should play after the install, but you may need or want to adjust some settings inside SPMC/XBMC. Again, look to the official XBMC wiki for help if you need it.
If you're rooted, you can probably do without the USB OTG cable. You could use ADB to install packages and the shell (or a wrapper like this — worked well for me a few months back) to control the screen. This might also be useful if your screen is dead.
There is a new specific xbmc for android that comes preconfigured with the most important repositories for those that really don't want to dabble with all of that kind of stuff. Just install and all the main plugins are automatically installed for you. You can find it here http://www.tvaddons.ag/tvmc-android/
Is TVMC anything more than XBMC 13.2 with preconfigured settings? Seems redundant slightly because SPMC (version 13.3.2) actually contains fixes to XBMC 13.2 to enable hardware acceleration on more devices. With the Z Ultra specifically, under XBMC 13.2 official, even though hardware acceleration was enabled in the settings, it was not working. SPMC is built by official XBMC team members and contains "fixes" that were left out of the official spin for whatever reason. The settings are also mostly preconfigured, at least the defaults are different than regular XBMC, and for me at least, everything worked right away.
What are the possibilities for a phone that does not support MHL? (Oppo Find 5) I had the same idea after I broke my screen, but I am not sure now what to do. A mediacenter seemed great to me. A webserver is possible too, but I don't like how it won't use it's media capabilities anymore.
The device supports wireless screen (Miracast?) but I don't think that works great and I can't get it to work really.
Well, Android Lollipop will support Chromecast Mirroring, so if you are able to find a rom for that device when Lollipop makes its way around, that would work. There seems to be a good amount of development for that phone on XDA, so you might just need to wait it out a bit.
HaTeNL said:
What are the possibilities for a phone that does not support MHL? (Oppo Find 5) I had the same idea after I broke my screen, but I am not sure now what to do. A mediacenter seemed great to me. A webserver is possible too, but I don't like how it won't use it's media capabilities anymore.
The device supports wireless screen (Miracast?) but I don't think that works great and I can't get it to work really.
Click to expand...
Click to collapse
mailme45 said:
Well, Android Lollipop will support Chromecast Mirroring, so if you are able to find a rom for that device when Lollipop makes its way around, that would work. There seems to be a good amount of development for that phone on XDA, so you might just need to wait it out a bit.
Click to expand...
Click to collapse
This may be worth a look if you are interested in chromecast mirroring.
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
mailme45 said:
Hello all! My first attempt at any type of guide or help, so give me pointers if you notice a better way to go about this than what's here.
This was done by me on my Ultra that broke, but I would imagine the same works for any other device that has a Snapdragon 800, and probably earlier chipsets as well. SPMC and XBMC have documentation about the supported hardware.
Doesn't it suck when you crack the screen on your baby and she no longer responds to touch input? We've probably all been there with one device or another. But don't let that busted phone gather dust, turn it into a full fledged media center! These quad core beasts can do so much more than the phones of a few years ago. I take no credit for anything here, as I'm just passing along my experience so others can make use of a disabled phone.
I have used Plex, Chromecast, etc, but no combination of those gives me the control of XBMC, and the ability to play mostly any codecs without the need for transcoding.
A few things before I get into the steps:
1. I started with a rooted phone, but you don't necessarily need one. It just helps later on if you want more control over the device functions.
2. I recommend using the most up to date firmware possible, I am on 4.4.4 myself, using this rom here:
http://forum.xda-developers.com/showthread.php?t=2800414
3. You'll want a usb OTG cable like the one I used here, along with a cheapo wired usb mouse so you can control the phone until it is set up to work with a remote.
http://www.amazon.com/gp/product/B00871Q5PI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
4. You'll also need an MHL adapter. I used this one here:
http://www.amazon.com/gp/product/B00KPXI4S2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
5. You'll need wifi, assuming you have moved the sim to your next device.
6. You will want some form of controlling XBMC remotely. I use Yatse for Android, installed on my replacement phone and it's a godsend.
https://play.google.com/store/apps/details?id=org.leetzone.android.yatsewidgetfree&hl
Here we go.
1. Clean that busted phone up. Reset to factory settings, flash a new rom, OR just remove any non-essential apps. I only have my phone signed into Google so I can access the Play store, which you will want to do as well.
2. Install this if you are rooted. It will allow the phone to disable the screen when the MHL adapter is plugged in, saving battery and keeping it nice and dark around your TV. The wizard should guide you through a fairly simple set up. What you are looking for is for the app to disable/suspend/standby the screen when it detects MHL.
https://play.google.com/store/apps/details?id=com.nkahoang.screenstandby&hl
3. Install SPMC. This is a forked version of XBMC for Android, and frankly, it's better suited for this application. It has more features, and takes better advantage of the hardware.
https://play.google.com/store/apps/details?id=com.semperpax.spmc
4. After installing SPMC, you can use it as a launcher, meaning the phone will boot directly into SPMC. Just press home and you'll be given the option.
5. Launch SMPC, go into Settings-Services-Webserver and check Allow control of XBMC via HTTP.
6. At this point, you can now control SPMC with Yatse or another similar XBMC remote app on another device. Depending on your situation, you may still want that mouse to do a few more things before you connect to the TV.
Options Options Options
I use XBMC in my living room on a dedicated PC. My media resides on a NAS, wired via gigabit ethernet to an AC wireless router. Since I wanted to use this broken phone as a sort of satellite system in the bedroom, I set up a MySQL server on the same NAS. It can be daunting, but XBMC provides great documentation and this method makes getting your media onto the phone very easy.
http://kodi.wiki/view/MySQL
If you do not have another XBMC or do not wish to share the library between devices, skip this section.
1. If you have another instance of XBMC, give this a serious look, as both the library and the playback status will be synced among all devices. You can stop in one room and resume in another.
2. Running the current version of SPMC, and XBMC 13.2, I had no issues with MySQL, despite the warning to use the same build date.
3. If you have this type of setup, all you need to do is copy the advancedsettings.xml file you created from your original XBMC install, and paste it into the userdata folder deep inside the SPMC file structure. This is usually found inside sdcard/Android/data
4. Once you do this, launch SPMC and your existing library will be there.
5. I have not tried this, since I went through the trouble to set up MySQL before, but you can alternatively use Media Browser 3 to serve up your library, and it does appear
to be easier to set up. Download the XBMB3C plugin inside XBMC/SPMC to allow for this.
http://mediabrowser.tv/download/#server
Add Media
Alternatively, you can navigate to videos inside SPMC, select files, and then choose Add Source to add your media from wherever to your new library. There is lots of documentation over at the official XBMC site, so go there if this is your first foray into this type of thing.
I've found that I just have to turn the phone on when I walk into the bedroom, and it will boot directly into SPMC. From that point I can use Yatse on a different device to control the media center. When I am done watching content, the shutdown option inside Yatse will shut the phone off, and it just goes into a powered down charging state.
Mostly everything should play after the install, but you may need or want to adjust some settings inside SPMC/XBMC. Again, look to the official XBMC wiki for help if you need it.
Click to expand...
Click to collapse
Im confused. How does the phone charge while its hooked into the TV?
Roseysdaddy said:
Im confused. How does the phone charge while its hooked into the TV?
Click to expand...
Click to collapse
The mhl adapter is powered.
http://ecx.images-amazon.com/images/I/71TmMtz9uIL._SL1500_.jpg
One port to rule them all
adfurgerson said:
The mhl adapter is powered.
http://ecx.images-amazon.com/images/I/71TmMtz9uIL._SL1500_.jpg
Click to expand...
Click to collapse
I have a Galaxy Note 2 with the same issue,
What is confusing me here is the phone has one MicroUSB into which three things need to plug into it
Power
OTG for Mouse and Keyboard
MHL adapter
ShiversZN said:
I have a Galaxy Note 2 with the same issue,
What is confusing me here is the phone has one MicroUSB into which three things need to plug into it
Power
OTG for Mouse and Keyboard
MHL adapter
Click to expand...
Click to collapse
1. The mhl is a Y cable with a male micro usb on the end of cord and a female at the end with hdmi that requires power which runs adapter and charges phone.
2. OTG is only for initial setup and will not be used with mhl ( OP states this is for screens that will display but not respond to touch) after setup control will be via a second device using yatse or another remote control app.
3. See #1.
This thread is great i ened up doing this very thing after destroying the digitizer on an s3 a while ago (I was one unlucky sap to try replacing a cracked screen) and the resultof having a usless phone was made better by having a perminant xbmc device connectd to my tv-way better than satellite or cable
Awesome!
I have a few devices that I keep around. Note 2, galaxy S2, nexus 1 (and my retarded/retired phones iphone 5S, ipad and blackberry playbook). I will definitely give it a try and let you guys know how it goes.
Have you tried on your S2?
Although I've touch screen working, but my gorilla glass is broken. I dont know some are saying that they've to replace whole assemble costing $125 here. While some people on the internet say that it can be done and on ebay I saw front panel(Gorilla) being sold in India.
I just came across this thread after my own experiences with getting this going yesterday! I have an LG Optimus G (E973) with a cracked digitizer, and I was about to buy an Android box, when I realized this phone would be more powerful, and have more features, than anything I could buy in the $100 range.
I made an OTG cable myself. Very easy to do, all you need is a microUSB cable male end, and a USB female end... except, problem #1, I found out my phone doesn't support OTG power. So I had to turn it into an OTG Y-cable so it can receive power (and charge the phone) simultaneously. Then, problem #2, my kernel doesn't support OTG. I wasn't able to figure this out. So I looked for another solution.
Maybe I could install VNC or one of those ADB viewers? Hook up my computer... problem #3, not authorized for adb. Can't authorize without touchscreen. (I later discovered the device keys are stored at /data/misc/adb/adb_keys, and could have added my computer in recovery.) Went to the gf's house and found my old MacBook Air, turns out that one was authorized!
Great! I'm in... now... after fiddling around trying to get it to work in Windows and OSX, problem #4 neither VNC or ADB viewers worked. I could SEE the screen, but interaction did nothing.
Eventually, I decided to just manually run touch events from the adb shell, a la adb shell input swipe 0 0 0 1280 to pull down the menu. Armed with this, I hacked together a script with JavaScript and PHP to have a web interface I could interact with my phone through. It's SLOW as hell at 768x1280 (max 1fps, I'd say), as it uses screenshots.
If anyone is interested, here's the script I made. https:// gist.github.com/shahyar/8d24815b54b8ca1c1d9c
...It didn't end there. I decided now that I have it working, I'll reset the data. Problem #5: I forgot that this also resets debug to off. I had to calculate, using a ruler, where to swipe and tap to enable developer mode, and then enable USB debugging. I wrote an init.d script which did this.
Now, I'm just waiting for my MHL cable and Bluetooth keyboard. Let's hope those go a little better than how the rest of this adventure did.
Screen cracked and not usable
I have a further issue in that my screen is cracked and I can't see what's happening on the screen.
Any thoughts on how to set it up in this case?
Great guide, thank you for taking the time to write it mailme45
tithij said:
I have a further issue in that my screen is cracked and I can't see what's happening on the screen.
Any thoughts on how to set it up in this case?
Click to expand...
Click to collapse
I was in a similar situation when I embarked on this little project, my screen was completely dead but i could hear sounds from the physical buttons so I knew the phone was on. There are a few solutions to get your phone setup, assuming you are still looking for a solution, if not I'll just mention it for the next person in this predicament. If you didn't buy your mhl adapter yet and your screen doesn't work at all, then I suggest buying a mhl cable with CEC function; this will allow you to control your phone with your tv remote when connected. These mhl adapters cost more than the ones found on ebay but also come with more features. The rocketfish RF-G1171($12 at bestbuy) for example will work with most phones including 11-pin samsung models so if you didn't buy a mhl yet, I would recommend getting one with CEC or one that comes as part of a hub, search ebay for the 5in1 mhl. If you already bought a cheap ebay one, continue reading below.
You will need a mhl cable, otg cable and usb mouse/keyboard; These steps are for people with a dead screen and digitizer. If your screen works but touch does not, just use a otg cable and mouse and if your screen doesn't work but touch does then use mhl cable and control using the touch screen.
Note** If you had USB debugging enabled already, skip to step 5
Step 1: connect the MHL cable to your phone and connect with your TV/Monitor and wait for your device to boot into the lockscreen
Step 2: Once at the lockscreen take out the mhl cable and use the otg cable to connect your mouse and swipe to unlock, switch back to mhl cable to make sure you got passed the lockscreen.
Note** If you had a password lock or pattern lock this will be very annoying, use the otg with keyboard if its a password and use mouse for pattern; might take awhile since you will be doing the pattern blind.
Step 3: use the keyboard to navigate to Settings > About Phone > scroll to "build number" and hit enter 7x to turn on developer options.
Note** As each phones menu, app layout and UI is slightly different, you may have to switch between mhl and otg just to see where you currently as you navigate. I suggest taking your time and switching between the two for each action you make, as we will only have to go through this process once.
Step 4: with developer options enabled, navigate to the "developer options" menu and turn on USB debugging.
Step 5: At this stage there are two methods, if you are lucky option 1 will work, if it does not, sadly you will have to go through the annoying mhl/otg switching to navigate one more time.
Option 1:
Install a google chrome app/extension called Vysor on your pc
Link: Vysor
This is an app developed by Koush that allows you to connect, view and control your android device on your PC through USB. The app is still in beta phase so might not work with every phone. Drivers will need to be installed for this app to work, which can be found at the Vysor homepage(I can't link to outsite sites so just google it) along with instructions. If the app works for you, I suggest the first thing you do is turn off certain features like lockscreen and sleep timer; next install a bluetooth keyboard/mouse/controller, something that will allow you to control the phone when connected to the tv/monitor through mhl. Finally you can also do all the required setups mentioned in this thread to get kodi running and when you are satisfied with the setup, connect the phone back to the tv/monitor.
Option 2:
If you were unlucky and Vysor did not work for you, navigate to the play store by switching between mhl and otg and install an app called Teamviewer Quicksupport. Install teamviewer on your PC; launch the app on your phone and you will be given an ID, use the ID on your PC to connect to the phone. When you try to connect from your PC, you will get a confirmation on your phone; make sure your phone is connected through mhl so you can see the confirmation. switch to otg to accept then switch back to mhl since you will be prompted to install an add-on, this add-on is necessary to view your phone screen on your PC. Once the add-on is installed, you will be able to see and control your phone from your pc, use your pc to setup your phone. As mentioned in option one, turn off certain features that are hindrance like lockscreen and install a bluetooth device that will let you control your phone wirelessly.
Hope this helps people with a completely dead screen but otherwise working phone, It can be very frustrating and time consuming but once you get past the initial stuff, you should be able to either link using vysor or wirelessly using teamviewer for feature setups.
So this is a great idea, except that it doesn't work for any other apps, since I do most of my watching on Netflix and HBO and I can't figure out a way to control the phone outside of Kodi.
We seem to be missing the required "Post your home screen" thread - so let me start it off !
Here's mine. I'm using HALauncher so that I can customize the home screen to my needs. I'm a big fan of HALauncher as it allows:
1 - Control over grouping and ordering. On the Shield default launcher, most-used apps go to the front of the line, so the order is always changing.
2 - Add sideloaded apps
3 - Add web page bookmarks
4 - Add wallpaper
5 - Add custom images for apps on launchers
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
..
kdb424 said:
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
Click to expand...
Click to collapse
dat gocchumon wa usagi desuka wallpaper tho :laugh:
I figured I'd get in on this. This is my SATV home screen. I am using Next 3D launcher and Go Weather EX for the weather widget as the SATV doesn't have the ability to use system widgets, but Next launcher can use widgets specifically built for it like task manager, music, weather, switch, and a few others.
do you need to be rooted to use a launcher, or it just that you click on the luancher icon and then it opens the new menu interface and thats it?
up
do yo uguys mouse and keyboard to navigate? isnt that annoying and takes away from using the remote etc
WHEN you use a luancher is it default... how do you set it to be default
My home screen is just stock. But I too would like to know how you got these launchers to work? And do you have to use keyboard mouse or no?
Sent from my SCH-I545 using Tapatalk
Can you seriously do evverything with this Shield thing? And what is it?
I think it's wonderful...
RemyB__ said:
Can you seriously do evverything with this Shield thing? And what is it?
I think it's wonderful...
Click to expand...
Click to collapse
Start by looking up a few reviews on YouTube and you will see the potential, pretty much play games, watch movie, TV, play music, really just about anything with the proper setup
kdb424 said:
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
Click to expand...
Click to collapse
how do you benefit from a full android experience?
I am using the sideloader and it seems to work well.
Launchers maybe?
Happy Shield TV Setup
Very happy with my Shield TV setup now.
I gave the stock experience a go for a good week before getting fed up of the limitations of Android TV, despite loving the well polished user interface.
Now running full Android 5.1 (v2.2 of zulu99's build), rooted with TWRP recovery and Xposed framework installed.
With a variety of Android TV apps sideloaded from apkmirror.com, I'm now pretty close to having everything which I had before on stock:
Slick, remote-friendly launcher: HALauncher (with lovely background / wallpaper images)
SHIELD Remote as primary input / control device, 90% functional (physical buttons, volume control, audio output when heaphones connected all work, microphone doesn't work yet)
Remote-friendly TV versions of Netflix, YouTube, BBC iPlayer, Emma for Spotify and SHIELD Hub / GeForce Now
Casting entire screen (or specific cast-enabled apps such as Netflix) from Android works and performs well enough to cast an entire movie
With all the numerous advantages of having full android, such as:
Multiple user accounts / profiles (my wife's Spotify plays no longer feed into my last.fm profile, thank god!)
Fully automated video downloading setup, thanks to Pushbullet, Advanced Download Manager and Tasker
Chrome web browser, for web browsing on your TV (finally!)
Casting screen from wife's Macbook Air and/or iPhone now works too, thanks to app "AirPlay Mirroring Receiver"
Thanks to all here who have helped get me to this stage! - primarily zulu99 for his full Android build, but everyone else who has helped by sharing tips/tricks to improve various bits of the experience.
The only thing left to get working as far as I'm concerned is the SHIELD Remote microphone.
This is a really frustrating one, as it's such a nice to have feature and really makes it feel like a futuristic device when you never need to type anything again - Google's voice recognition is outstanding.
I'm also at a bit of a loss as to what to investigate next with it; I've attempted to debug the remote from my PC but could only get it to create a single uni-directional A2DP channel for audio playback.
I guess I should start trying to dig through the kernel modules included in the stock system image.
Anyway, here's the top bit of my home screen:
and a few other screenshots showing the rest of the home screen, settings and the microphone issue.
How do you change the home launcher without changing away from stock.
Almost a real Android now!
@zulu99 Full Android 5.1 (v2.2 build), rooted with Nova Launcher. Still need to install Xposed framework and a few other bits, but getting close to having a real Android now!
Loving some of the setups you guys have! I'll have to get to work on setting mine up.
andrewthecoder said:
Very happy with my Shield TV setup now.
[...]
[*]SHIELD Remote as primary input / control device, 90% functional (physical buttons, volume control, audio output when heaphones connected all work, microphone doesn't work yet)
[...]
Click to expand...
Click to collapse
Hey,
how did you manage it to have the volume buttons of the Shield TV remote working?
I am also running zulus' Full Android and paired the remote with bluetooth but the volume buttons are not working...
Did you do anything special?
A working microphone would make it just perfect
Thanks!
justkidding2009 said:
how did you manage it to have the volume buttons of the Shield TV remote working?
Click to expand...
Click to collapse
I'm actually not entirely sure, the volume slider on the remote wasn't working for me initially either.
I had written it off as something that wasn't going to work, but then noticed it was working accidentally later on after I'd set up more apps.
I believe all I did between the time where it wasn't working and started working was:
Install a few apps made for Android TV (e.g. Netflix, BBC iPlayer, HALauncher, Emma for Spotify)
Disconnect and reconnect the controller a few times
Restart the Shield TV (NSTV) a few times
If you give the above a try and the volume controls on your remote are still not working, post in my other thread about the remote and I'll try and narrow down what's making it work for me!
andrewthecoder said:
I'm actually not entirely sure, the volume slider on the remote wasn't working for me initially either.
I had written it off as something that wasn't going to work, but then noticed it was working accidentally later on after I'd set up more apps.
I believe all I did between the time where it wasn't working and started working was:
Install a few apps made for Android TV (e.g. Netflix, BBC iPlayer, HALauncher, Emma for Spotify)
Disconnect and reconnect the controller a few times
Restart the Shield TV (NSTV) a few times
If you give the above a try and the volume controls on your remote are still not working, post in my other thread about the remote and I'll try and narrow down what's making it work for me!
Click to expand...
Click to collapse
Thanks for your support.
I will test that during the weekend
Are the volume buttons for you only working inside HAlLauncher or also in the "normal" Android Launcher?