water damage - Atrix 4G Q&A, Help & Troubleshooting

Last night i was out, and well basically my phone isnt working and im 90% sure its water damage now, the screen has little white bits round the end, whats the best way to get it working again, because it wont turn on :/

sell it on ebay for parts and buy another one.

pcdocta said:
sell it on ebay for parts and buy another one.
Click to expand...
Click to collapse
I concur.
My girlfriend knocked her phone off the counter into the toilet when she was sick (needless to say phone had some chunks on it as well). It was game over. luckily in US we are able to insure it and we are now getting a new one for the one time "low cost" of $125. 125 is better than a full retail, thats for sure. I made her call AT&T before just to see if we could weasel a SII on early upgrade, no dice.
Moral: Insurance ftw

First suck all the beer out of it! Want not waste not!
Assimilated via WinBorg 4G

Best thing to do would have been to take out the battery/sim/sdcard and put in dry rice immediately, then leave overnight. Might not be too late either, but def should have done that right away. Right after I got my Captivate I got really drunk and accidentally soaked it, I didnt even realize it had gotten so wet until I woke up the next morning and tried to turn it on. It even tried to boot, showing the Samsung screen briefly then immediately turning off. Taking the battery door off there was water drops inside. After about 18 hours in rice I was soooo surprised that it booted right up and I havent had a problem out of it to this day!! I still use it all the time.

CaelanT said:
First suck all the beer out of it! Want not waste not!
Assimilated via WinBorg 4G
Click to expand...
Click to collapse
It wasnt even beer, it was just raining loads so it got soaked in my pocket
Thanks for the advice guys, i put it in dry rice so we'll see how that goes *fingers crossed*

So i have put it in dry rice, and well it booted up but the touch screen was unresponsive, and so was the fingerprint sensor leaving me with no way to actually use any of the phones features, i think there is a tiny bit of water left so im going to stick it in rice a bit longer but try and get the screen repaired if that doesnt help,
Is there anyway i can access the stuff on my phone using the usb connection maybe?

Sorry to hear about your phone. My son got pushed into a swimming pool with his Atrix in his pocket. It is fully functional today.
What we did.
Rice and a warm spot. Not for hours... It took a whole week before everything straightened out. There was an issue with the sim and sd card readers, but nothing an emery board didn't fix.

First mistake, you turned (tried to) it on. Second mistake...........you turned it on too soon after putting it in rice.
One day in dry rice is not enough. If you read guides about water damage you will see that you really should have the phone in dry ice for 5 days. Never ever plug it into the charger or turn it on before you do this. Only takes one wee drop of liquid to short something out.
Next, you should strip the phone down and clean everything internally to make sure you will not suffer from oxidation and corrosion in the future. Many phones will work after being in dry rice, only to succumb to corrosion after a few weeks or months because all the connectors inside became oxidized.
In short, water damage is horrible, but there are many guides on the internet specific to this outside of XDA which can help you. The iPhone water damage guides are especially useful, even though the hardware is different. The concept is exactly the same.
First rule is always do not attempt to turn the phone on, and do not plug into a charger.

malfuncion said:
I concur.
My girlfriend knocked her phone off the counter into the toilet when she was sick (needless to say phone had some chunks on it as well). It was game over. luckily in US we are able to insure it and we are now getting a new one for the one time "low cost" of $125. 125 is better than a full retail, thats for sure. I made her call AT&T before just to see if we could weasel a SII on early upgrade, no dice.
Moral: Insurance ftw
Click to expand...
Click to collapse
SII isin't an upgrade.

Thanks caelan, cant change what i've done now, so maybe ive ruined my phone my turning it on multiple times, ive left it in the dry rice which im gooing to do for the rest of the week and if it isnt then working im going to take it to repair shop, thanks for all your guys help.

King_MSD said:
Thanks caelan, cant change what i've done now, so maybe ive ruined my phone my turning it on multiple times, ive left it in the dry rice which im gooing to do for the rest of the week and if it isnt then working im going to take it to repair shop, thanks for all your guys help.
Click to expand...
Click to collapse
Hope this helps, the phone that I mentioned, was turned on immediately after getting wet. His girlfriend was the smart one and pulled the battery for him.
We sat it in the rice and checked it every day by turning it on. (I am in no way recommending this btw, simply reporting an experience.). Each day it seems like it got better and better. The last two days everything was working, but there was still evidence of moisture on the screen. So we baked it for a few extra days. I did have an advantage over you. The outside temp was 100 plus and I sat his, in that bag of rice, on the hood of a red car everyday for most of the afternoon. It will most likely take longer with a cooler temp to work with.
We may have been 'lucky'. But this is so you know that there is a great chance that everything will be fine.

well, an update on my girlfriend's PUKE phone:
The day I posted that was I think thursday, we let is sit all thursday- friday- saturday. On sunday (around noon) she couldnt handle the Nokia 3360 any longer. When she left for her "mani/pedi", I sat down with the poor phone. After a little cleaning of contacts and such I was able to get it to boot and come up. When she got home it was up and going. She was thrilled and I got a "reward".
She used it all Sunday and today until the insurance joint came in. The only thing that didnt totally dry was the screen. It looked like pure hell, but worked. She said anythign was etter than the old green screen nokia
PS- she had tried to turn it on friday and got a "Modem Failed to Initialize: Starting RSD". Sunday it worked fine.

i dropped my phone in the toilet. managed to take it out. it was still in the power on state. removed battery asap! whats next?? shall i get it some heat, hair drier or bulb ?? how many day do i need to keep this phone in the rice? also im not an expert in disassembling!!! any suggestions?

I've heard up to a week but a couple days will probably work. I would probably just use a can of compressed air. Hair dryers can create enough heat to loosen the adhesive for screens on phones. Maybe place it near a vent or put it on a window sill with sunlight?
njarun said:
i dropped my phone in the toilet. managed to take it out. it was still in the power on state. removed battery asap! whats next?? shall i get it some heat, hair drier or bulb ?? how many day do i need to keep this phone in the rice? also im not an expert in disassembling!!! any suggestions?
Click to expand...
Click to collapse

Related

Bricked my eris but not how your thinking

I couldn't find my phone last night so I decided to change the loads in the washer and look for it in the morning. I put the jeans in the dryer and it starts making this loud thump thump thump. I stop the dryer and look inside and guess what I found, you guessed it, my phone. Gotta smile. Now my options are as slim as my wallet. I can replace the eris with an old Palm treo or I can try and find an eris for cheep. Oh well, it was nice while it lasted. Guess I won't have to patiently wait for 2.1 OTA now.
Depends...
All depends on your budget. An Eris on ebay can be had for around $200
Plenty of decent verizon phones exist out there depending upon your needs though
we actually have a sign next to the start button of our washing machine saying to make sure you have your phone in your hand before starting. We lost 2 dumbphones last year to that happening. Try the sign. I have an HTC Touch Pro for big red if you want it (which you don't).
UPDATE! Got home from church and the phone powered up. Unfortunately it is showing an error screen. I am just going to leave it off for the next 24 hours and see what happens. A few years ago I dropped an old phone into my dad's pool and thought is was a goner but after a couple of days of drying it came back to life.
Here is a pic of the error message
Not sure if this is too late, but pull the battery and leave the cover off. Put the phone in a jar of rice for a day or two. The rice will help pull out the moisture. Good luck...
Try the rice thing it might still work.
Sent from my Eris using the XDA mobile application powered by Tapatalk
So as of last night the phone powered up but after a few minutes it shut down and wouldn't power back on until I removed the battery. So I stuck it in a cup of rice and am now just letting it sit. Thanks for the suggestion Elementix makes perfect sense (no pun intended). Also, thanks walkingtaco for the idea and offer for the phone. I have an old Palm treo 700p that I am muddling through with right now.
Well, even if the rice doesn't work you still might want to see about trying a different battery. The phone may be fine and it could be the battery's fault. Who knows..
Good point. My wife has an eris as well. I will steal her's to "test" then I might need to consider an extended battery. If that is the case anyone got any suggestions of a good quality extended battery.
anything by seido
Sent from my Evil Eris v1.1 using the XDA mobile application powered by Tapatalk
If the rice doesnt work, flush it out with 90% isopropyl alcohol and then let it dry in rice or near a fan.
The alcohol will evaporate any water and get rid of any contaminants. This usually works for most phones. I saved two or three dumbphones like this.
The rice should work. Make sure you take out the MicroSD card. That may be your problem. I completely submerged a G1 in water for 5 minutes as a test, then I washed it with 70% alcohol and stuck it in a zip-lock bag of rice for 2 days. The G1 still works perfectly and the rice pulled out all the moisture from everywhere... even the screen which looked terrible before and perfect after =)
Note: you may need to factory reset the device if the SD card was the problem.
BEST OF LUCK!
Thanks for all the advise and suggestions. I am happy to report that after a day of testing the eris seems to be back to 100%. I do think I am going to purchase an extended battery for it though at some point. Maybe if we ever get 2.1 to see how battery life does with the new os.

Eris build quality

Just had to share this one.
My fiancee managed to forget her Eris in her pocket and left it in a full wash cycle. After which, she dries off the outside and tries to turn it on... yea, I know . THEN she plugs it in. Again, I know . She finally calls me and tells me what happened. I figured after all she told me it was dead, so we went to get a new phone, since we had a line up for an upgrade.
2 Weeks later (yesterday), I decide to take the phone corpse and put my battery in it. No idea why, just curious. Well, it booted. Did a few tests and checks, and everything, everything!! works . The only thing that seemed to be a loss was the battery. Now we're returning the new one, and keeping that upgrade date available.
Never thought the Eris was that durable. A full wash cycle and trying to turn it on, and we only lost a battery. Awesome.
Theyre pretty tough little phones, some user here posted about how he left it in the snow for a day or two and ran it over with his car unknowingly, once he brought it in and let it dry it still booted up and worked..albeit with a cracked to hell screen. Gotta hand it to HTC, they know how to build phones.
all it really comes down to is water on a circuit board. its really not that big of an issue, as long as the liquid isnt corrosive, or electricity is passing threw the circuit board. then you can just dry it off, let it site, some people even put it in rice to absorb the moisture, then its all good and working again.
ECLIPS3 said:
all it really comes down to is water on a circuit board. its really not that big of an issue, as long as the liquid isnt corrosive, or electricity is passing threw the circuit board. then you can just dry it off, let it site, some people even put it in rice to absorb the moisture, then its all good and working again.
Click to expand...
Click to collapse
eh ive had a few lgs beyond repair even with the rice and enough time to dry, htc has consistent build quality
ECLIPS3 said:
all it really comes down to is water on a circuit board. its really not that big of an issue, as long as the liquid isnt corrosive, or electricity is passing threw the circuit board. then you can just dry it off, let it site, some people even put it in rice to absorb the moisture, then its all good and working again.
Click to expand...
Click to collapse
That's why it amazes me. She dried off the outside and them tried to turn it on. Even plugged it in. The insides were still water logged. She told me the screen even lit up a strange grey color for a second.
She now knows never to turn on a wet phone, lol
chaoss13 said:
Just had to share this one.
My fiancee managed to forget her Eris in her pocket and left it in a full wash cycle. After which, she dries off the outside and tries to turn it on... yea, I know . THEN she plugs it in. Again, I know . She finally calls me and tells me what happened. I figured after all she told me it was dead, so we went to get a new phone, since we had a line up for an upgrade.
2 Weeks later (yesterday), I decide to take the phone corpse and put my battery in it. No idea why, just curious. Well, it booted. Did a few tests and checks, and everything, everything!! works . The only thing that seemed to be a loss was the battery. Now we're returning the new one, and keeping that upgrade date available.
Never thought the Eris was that durable. A full wash cycle and trying to turn it on, and we only lost a battery. Awesome.
Click to expand...
Click to collapse
Well, that's good to know because I may end up using it as a rock because it's life as a phone is gonna be very short unless I figure out a way for it to hold a charge for more than 3 hours and complete a call without having the person on the other end repeat themselves 3 times. Eris took the "smart" out of smartphone, that's for sure.
Sorry....double post
mountaineerndixie said:
Well, that's good to know because I may end up using it as a rock because it's life as a phone is gonna be very short unless I figure out a way for it to hold a charge for more than 3 hours and complete a call without having the person on the other end repeat themselves 3 times. Eris took the "smart" out of smartphone, that's for sure.
Click to expand...
Click to collapse
Sounds like you should call Verizon for a replacement.. assuming you have TEC
-mak

Got my Eris wet

Went swimming last and forgot my phone was in my pocket, it was only underwater for a minute till I pulled it out. I dried dried it off the best I could and even used a hair dryer but I think the screen is ruined. When I power it on it vibrates and the lights flash on like normal just the screen is blank.
Am I screwed?
Yes. Don't try taking it to Verizon either. Time to get on eBay
Sent from my nonsensikal froyo using XDA App
at this point I screwed up and have to but a new phone.
What?
Sent from my nonsensikal froyo using XDA App
Here's a fix...
First, your battery is definitely done. But the phone is not. Take the phone apart. Don't get too crazy just separate the main screen piece from the backing and battery cover. Then, fill a sandwich baggie with dry rice and put all the pieces in with it. Let it be for about 24 hours (longer is better). Put it back together. You should be good to go (hopefully your new battery has arrived). If there is moisture left in the the screen, it'll look funny but it dried out for me after a couple more days and looked normal.
Obviously, no guarantees here, but this has worked for me...twice. It's not a perfect fix but it'll save you a few bucks.
Thanks for the advice! everything is working but for some reason 3G is not which is very strange.
Don't leave the phone on the bed while you are having fun with your wife. Oh wait. Whenever I go to the steam room or next to a pool I keep my phone away from humidity.
lol ill keep that in mind, Right now I'm having a connection problem. wifi seems to work but really slow. Also I am unable to connect to 3G or any other network. I cant make or receive calls or surf the web. I tried wiping and flashing the newest TazzFroyo rom but I still have the same problem. Any ideas?
Maybe your radio was affected. The rice may not have helped it
Sent from my FroyoEris using XDA App
Threeball said:
First, your battery is definitely done. But the phone is not. Take the phone apart. Don't get too crazy just separate the main screen piece from the backing and battery cover. Then, fill a sandwich baggie with dry rice and put all the pieces in with it. Let it be for about 24 hours (longer is better). Put it back together. You should be good to go (hopefully your new battery has arrived). If there is moisture left in the the screen, it'll look funny but it dried out for me after a couple more days and looked normal.
Obviously, no guarantees here, but this has worked for me...twice. It's not a perfect fix but it'll save you a few bucks.
Click to expand...
Click to collapse
Best advice ever given on xda. Im an electronics repair guy for the army and whenever someone brings us a wet device we do exactly this. Take it apart as much as your skills allow and you are comfortable with, then leave it in rice for a couple days. After all this take some canned air and blow it out to make sure there isnt any dirt or particles in there and put it back together...
悲剧,i am sad
I have dropped my phone in water for 30 seconds or so and pulled the battery as fast as I could, then placed everything (taken as far apart as I could) on my radiator on top of a couple of pencils (to avoid direct contact) for a couple days and my phone has never shown any problems including battery.

Dropped Galaxy S II in water Help!

Okay....i have a black international galaxy s II converted to white and i dropped it in the water last night I was fairly intoxicated and my friend immediately helped me put it in a bowl of rice battery out etc....I left it like that overnight then tried to turn the phone on (not smart)wasn't turning on.....i came to my senses and disassembled the phone right away this morning and saw it was still a bit wet, immediately stuck it in the bowl of rice.
What it's chances at survival?? lol it was legit in water submerged for a only 1 sec if anything, i immediately snatched it out and saw that it was still turning on etc...
Also, what are warranty options? You think they'd know it was water damage after i put it back together? I also have a custom ROM and kernel and stuff but if it doesn't turn on would they be able to find out?
Hopefully the bowl of rice fixes it -.- I've had the phone for maybe like 1 month tops
Ugh so sad
Edit: fully functional luckily, no water damage, no eroding, litmus indicator is still fine and didn't change colors to indicate water damage. Close call but 100% perfect
The prognosis is not good. Warranty does not cover water damage unless you have insurance on the device. Sorry, I hope I'm mistaken for your sake!
pewpewbangbang said:
Okay....i have a black international galaxy s II converted to white and i dropped it in the water last night I was fairly intoxicated and my friend immediately helped me put it in a bowl of rice battery out etc....I left it like that overnight then tried to turn the phone on (not smart)wasn't turning on.....i came to my senses and disassembled the phone right away this morning and saw it was still a bit wet, immediately stuck it in the bowl of rice.
What it's chances at survival?? lol it was legit in water submerged for a only 1 sec if anything, i immediately snatched it out and saw that it was still turning on etc...but i could see it getting a bit wonky and crap.
Also, what are warranty options? You think they'd know it was water damage after i put it back together? I also have a custom ROM and kernel and stuff but if it doesn't turn on would they be able to find out?
Hopefully the bowl of rice fixes it -.- I've had the phone for maybe like 1 month tops
Ugh so sad
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
blahhh......it doesn't look like theres any water damage since i have a feeling the rice soaked a lot of water initially.
lol been going all over the web watching youtube videos etc....seeing ppl freaking submerge their galaxy s II and it still working damn.
Gonna leave it in the rice for another like 2 hrs probably then see how it does, was barely any water when disassembled, droplet here and there but that doesn't mean jack sh*t.
Im really praying it survives and works
a couple of things...
1. The battery might need replacing. Batteries are easily damaged by water.
2. Leave it rice for 4-5 days. It can never be too dry.
I would try someone's battery to see if it is still working in a couple of days.
It's not the amount of water, it's where it gets to - even a single droplet can kill a device if it shorts the right (or wrong) circuits.
Also even if it's completely dry and left in rice for a month you probably can't warranty it as there's water sensitive tabs all over modern smartphones. On the battery, usually near the headphones jack and others inside.
bunnybash said:
a couple of things...
1. The battery might need replacing. Batteries are easily damaged by water.
2. Leave it rice for 4-5 days. It can never be too dry.
I would try someone's battery to see if it is still working in a couple of days.
Click to expand...
Click to collapse
Good thing i have my OEM battery and an extra anker 1900. The first anker was in the phone so if thats messed up, I have 2 other batteries to try.
Damn 2 days -.- I'm probably gonna end up trying it tonight or something lol. Im in college and flying home on tuesday so i kinda need to find out if it'll work or not. Thanks for the help.
But damn, all those survival stores of the galaxy s II is making me both sad cuz if mine doesn't work, how the hell did theirs survive and hopeful it may work. Lol some dude had his in a full cycle washing machine, left the phone in rice for 7 days and it worked
Cactus42 said:
It's not the amount of water, it's where it gets to - even a single droplet can kill a device if it shorts the right (or wrong) circuits.
Also even if it's completely dry and left in rice for a month you probably can't warranty it as there's water sensitive tabs all over modern smartphones. On the battery, usually near the headphones jack and others inside.
Click to expand...
Click to collapse
Yea i know, I'm just trying to be hopeful lol but I'm expecting the worst, and thats that it doesn't turn on
OMG MY PHONE LIVES MUAHAHAHA YESS!!!!
Time to turn it back off and let it soak more in rice just in case. So happy right now I'm tearing
Im still gonna buy the AT&T Galaxy S II tho from craigslist lmfao and then just sell it...trading headphones plus cash for it haha
You might want to give it a blow with a hair drier.On the lowest temperature,try to make the air stream hit the whole of the board.Just to be 100% sure.
tolis626 said:
You might want to give it a blow with a hair drier.On the lowest temperature,try to make the air stream hit the whole of the board.Just to be 100% sure.
Click to expand...
Click to collapse
i've heard a hair dryer is a bad idea, reading about it on the webs. Apparently it messes with the circuit boards or w/e......air dry is the best, i just let it sit in rice for a bit longer, pretty confident all of it is dry since i took the phone apart and let it sit in the rice.
Running it now and everything is working perfectly.

Water Damaged EVO 3D. Possible to Fix?

Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Hmm well it might be but It's hard to tell if the board got damaged or just the screen. If u really want to fix it buy one off eBay or Craigslist with a broken screen and swap internals. At least that's what I'd do
Sent from my PG86100 using xda premium
Try drying it out totally before using it. Take the back cover off, take battery out, stick main unit in a ziploc bag full of rice and leave it alone for 3 days. The rice will suck up every last drop of moisture that would otherwise take weeks to evaporate out.
^^ awesome idea forgot to mention that rice is like a miracle worker I've saved many a phone that have taken full swims just by throwing them in a bag of rice for a couple days
Sent from my PG86100 using xda premium
Nanan00 said:
Try drying it out totally before using it. Take the back cover off, take battery out, stick main unit in a ziploc bag full of rice and leave it alone for 3 days. The rice will suck up every last drop of moisture that would otherwise take weeks to evaporate out.
Click to expand...
Click to collapse
Alright. I'll try that even though it was water damaged over a week ago. Maybe there's still some left...?
it. said:
Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Click to expand...
Click to collapse
there is a chance. but probably would require an extensive knowledge of circuitry and i'm guessing since you don't know where to even start... probably not going to happen. lol
don't take that the wrong way by the way, it just sounds very grim to me.
cobraboy85 said:
there is a chance. but probably would require an extensive knowledge of circuitry and i'm guessing since you don't know where to even start... probably not going to happen. lol
don't take that the wrong way by the way, it just sounds very grim to me.
Click to expand...
Click to collapse
LOL. Yeah, I thought it was a long shot. I'll try the rice thing for a couple of days but I'm not getting my hopes up. I thought it was worth a try for $25
Mine survived being totally submerged in water when it fell in a puddle. at first the screen didn't work at all, then it flickered, then it had some lines on the screen, then after one day it was fully functional in every aspect haha, all I did was put it in rice, and all is well... Now I just wish I had waited to file an insurance claim, as now I'm stuck with a refurbished with 1.5
Sent from my PG86100 using xda premium
Well I would investigate some "tear down youtube videos" get the basic layout of the internals. Etc etc, maybe look into replacing the screen/digitizer
After you dry it out if screen still doesn't turn on, turn it on and leave it on for awhile, with caution... See if goes up in flames...would make an epic video if it does btw, but if something is damaged I would assume it would short out, and fry some stuff... Vibration means something is gettin power...
Shot from my sharp shooter in 3d
It's too late now to do the rice trick. If there was water on the board and the user tried to turn it on, the damage has already been done and chips were probably fried.
hitman4274 said:
Well I would investigate some "tear down youtube videos" get the basic layout of the internals. Etc etc, maybe look into replacing the screen/digitizer
After you dry it out if screen still doesn't turn on, turn it on and leave it on for awhile, with caution... See if goes up in flames...would make an epic video if it does btw, but if something is damaged I would assume it would short out, and fry some stuff... Vibration means something is gettin power...
Shot from my sharp shooter in 3d
Click to expand...
Click to collapse
the "with caution" part, here, should simply be don't turn it on at all. turning it on with water or moisture still present internally could damage it beyond repair (if that isn't the case already).
pull the battery out, and throw it in a very large, sealed Ziploc, bag of rice for a few days, maybe even longer - and cross your fingers. if it doesn't work after that. I wouldn't put anymore time and certainly not anymore money into it.
and yes it was worth a shot for only 25 bucks, for sure. I would have given it a try for that price.
I had a HD2 with the same problem. your screwed dude. Sorry. No amount rice is going to save that phone.
Yep, I think the only thing that saved mine, when it was totally submerged, is that the battery was completely dead, so nothing got power.
Sent from my PG86100 using xda premium
it. said:
Last week, my friend's EVO 3D was water damaged. He was going to throw it out but I offered him $25 for it and he gave it to me. When I try turning it on, it vibrates, the buttons at the bottom light up but the screen doesn't seem to turn on. Is there any chance of fixing it?
Click to expand...
Click to collapse
Take the phone apart and try this, with just the board, an alcohol (as pure as you can get) soak for 2-5mins then air dry (let sit for 1-2hours). Reassemble and test. As the alcohol evaporates, it extracts water out of the circuitry. But, as it has been mentioned, powering it on prior to a full dry may have already fried it.
Sent with L*W*H
Theres no science behind water damage, if you've turned it on already then it's too late for any measures to be taken.
In future, if you drop it in water, remove it straight away, remove everything from the phone, try to get as much water out as you can, then pop it in a bowl of dry rice for as long as you can, months would be best, simply assume that the phone is gone and do not switch it on until you can assure that it is completely dry, any other measures you can take seldom work but some have had results, the rice trick is as good as it gets tbh.
Avoid water like the plague with your phone.
Please help!
So I bought the HTC Evo 3D and had it for about 20 hours before I drowned it in a cup of tea (yes I was drunk) where it sat for a couple of minutes before it was discovered. As soon as it was discovered, I turned it off and removed the battery. It sat over night band in the morning I turned it back on and it works. But I immediately realized that there was still water at the bottom of the screen. I again turned it off and removed the battery and it has been sitting in rice for over a week. There is still water at the bottom of the screen! I'm so frustrated! I don't have a cell phone repair place where I live and I have no experience with working on cell phones. I have even tried using a blow dryer a little but am worried that the heat will harm the screen. My sister suggested just trying to used the phone and the heat from the phone working would evaporate the left over water but I am also afraid of frying things too. Any suggestions???
You turned it on while it was still wet. It's done for. Time for a new phone.
Sugar or colorants that were in the tea could have made that mark on the bottom of the screen
Anyway, i really don't think is there anything you can do.
Sent from my HTC EVO 3D X515m using xda app-developers app
Uncle Lizard said:
You turned it on while it was still wet. It's done for. Time for a new phone.
Click to expand...
Click to collapse
Exactly. Even if you get all the water out, you likely fried the board somewhere. If you still want an evo 3d, they are pretty old now, you should be able to get one on ebay for under 50 bucks.
You could attempt to take your phone apart and clean all the internals with rubbing alcohol but chances are your phone is past-out for ever
(Don't ask me for help as I couldn't care if your phone explodes, eh! )

Categories

Resources