Backtrack 5 - AT&T Samsung Galaxy S II SGH-I777

Hey, I wasn't entirely sure where to post this so please move if needed, but in case anyone was curious, this guide (http://forum.xda-developers.com/showpost.php?p=15523894&postcount=1) works great on our phone. i just installed it with no problems. ill quote the thread here
DooMLoRD said:
\\----[ Announcement ]----//
[12/July/2011] Updated with new package (bt5_sgs2_shell_scripts_v2.zip) containing shell scripts & busybox
//----[ Announcement ]----\\
hi guys DooMLoRD & anantshri present to u:
BACKTRACK 5 on SGS2
all the work was done by anantshri, i mostly assisted by testing it on my SGS2 and modding it slightly so that it will work properly for SGS2... dont forget to thank him!
i will try n keep it short and simple...
for more details u can read the original thread at X10 sub-forums...
[DEV] BACKTRACK 5 on Xperia X10 chroot
[ Screenshots ]
on startup (shell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in GUI:
phone + BT5 GUI:
[ Requirements ]
rooted device with busybox installed, if u are using CF-root kernel then u already have busybox installed
Some apps from Android Market:
Android Terminal Emulator
androidVNC
[optional] highly recomended keyboard: Hacker's Keyboard
7zip (for PC), for extracting the files
around 3.3 GB free on internal sdcard (/sdcard/)
[ How To : File Setup ]
u need to do this only once
download the files from the links provided in this thread
extract the files using 7zip to a temporary folder (needs 3.3GB free on that drive)
connect ur SGS2 to PC and mount USB storage
create a folder named 'bt' (without quotes) in the root of ur sdcard and copy the bt.img in that folder
also place the file bt5_sgs2_shell_scripts_v2.zip in root of sdcard, this file has to be flashed via recovery
once u verify that the above is correct then un-mount usb storage
reboot into recovery and flash the file bt5_sgs2_shell_scripts_v2.zip stored in root of sdcard (or if u are using CWM app then just select the file for flashing and the app will do the rest )
once ur phone reboots into OS just check the /sdcard/bt folder
final directory structure should look like this:
/sdcard/bt/bt
/sdcard/bt/bt.img
/sdcard/bt/installbt.sh
/sdcard/bt/startbt
/sdcard/bt/stopbt
once u verify that the above is correct then u can proceed
[ How To : Launch BT ]
start Terminal Emulator app on ur SGS2 and enter the following commands step by step (accept/allow any SuperUser request/popup that u may receive)
su
cd /sdcard/bt
sh installbt.sh
startbt
bt
now u are in BackTrack5 shell
to launch GUI (vncserver) enter the following command
ui
now note the number N shown localhost:N
e.g. as u can see from the above image that "New 'X' desktop is localhost:1", so N=1
the vncserver is running at (5900 + N, N=1 ; so server port is 5901)
now launch androidVNC app on phone and fill in the detials as follows
Nick : bt
Address : 127.0.0.1
Port : 5901
Password : 12345678
Username : <leave it blank>
Color Format : 24-bit color (4 bpp)
inside vnc window select input mode (i personally recommend the following)
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
and then press connect... now u are in BackTrack GUI!
if u want to exit/close BT5 then u need to follow these steps:
close the androidVNC app (Menu -> Disconnect)
go back into Terminal Emulator app and enter the following commands
u should be at this shell [email protected]:~#
killui
exit
now u will get back to this shell> #
now enter the following commands to stop bt and exit
stopbt
exit
exit
u can now exit the Terminal Emulator app
i would also recommend that u reboot ur phone
[ Important Info ]
root password is 12345678
[ Download Links ]
update.zip package containing shell scripts, busybox (which gets installed to temporary location) [to be flashed via recovery]
this will not disturb/conflict with busybox of ur ROM/CF-Root kernel
bt5_sgs2_shell_scripts_v2.zip (~800KB)
main bt.img
these links are 7zip archives split into 50mb files, u will need to download the following:
total size: 486MB
bt.7z.001 (50 MB)
bt.7z.002 (50 MB)
bt.7z.003 (50 MB)
bt.7z.004 (50 MB)
bt.7z.005 (50 MB)
bt.7z.006 (50 MB)
bt.7z.007 (50 MB)
bt.7z.008 (50 MB)
bt.7z.009 (50 MB)
bt.7z.010 (36 MB)
also uploading to mediafire for mirroring...
Mediafire Folder: http://www.mediafire.com/?f9gk3p3t9wip5
md5 hashes:
Code:
bt.7z.001 f19e769bf42b44867c8bb1d9bb9c5d44
bt.7z.002 a4dd26a98d2c6925d871fb108fb5fadb
bt.7z.003 ecca5a5d72c449117b1d3dbc23aeb1a2
bt.7z.004 8ad487a01e4d149f0247ad9288201f32
bt.7z.005 adab9cb3778cd8ac89ccc0e21997c3d7
bt.7z.006 ba6a28de70a1115dc316f45cea508215
bt.7z.007 f59757e891631607e1a35abadb231b3b
bt.7z.008 cdb8c28a1fbd03657bb42e8d69f0600b
bt.7z.009 426d892f872679e3d53d0ebb0376e138
bt.7z.010 c7d2957bc65340d967b9dd3646d7cb39
ENJOY!
Click to expand...
Click to collapse
after you install using these directions above, if you would like to make it easier to start, copy "startbt" and "stopbt" to /system/bin/
when you start terminal you can just run those commands instead of having to navigate to /sdcard/bt everytime

Working well on my SGS2, thanks man magnificent work!
Here's some screenshots

What kernel?
Sent from my SAMSUNG-SGH-I777 using XDA App

Are we going to be able to crack wep keys and stuff with this?
Sent from my SAMSUNG-SGH-I777 using xda premium

weedolo9y said:
Are we going to be able to crack wep keys and stuff with this?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
monitor mode and packet injection is not working

What kernel?

n1nj4dude said:
monitor mode and packet injection is not working
Click to expand...
Click to collapse
Lame so what is the point of having backtrack on here lol
Sent from my SAMSUNG-SGH-I777 using xda premium

There's more to backtrack than wep cracking....

I'm on CM7
Sent from my Snappy CyanogenMod7 SGS2

n1nj4dude said:
There's more to backtrack than wep cracking....
Click to expand...
Click to collapse
Exactly, I wanna see who's on my turf, not too hard of a setup at all, was hesitant to do this on my captivate, glad I tried it on my SGS2!
Sent from my Snappy CyanogenMod7 SGS2

akira02rex said:
What kernel?
Click to expand...
Click to collapse
I'm using stock rom with entropys kernel.. but it should work with any kernel..

im curious as to why we might need this or use this bc i know this is helpful for wep cracking which i would love to know how to use lol

klodjan91 said:
im curious as to why we might need this or use this bc i know this is helpful for wep cracking which i would love to know how to use lol
Click to expand...
Click to collapse
Not a need, more of a want. Decisions, decisions , decisions
Sent from my Snappy CyanogenMod7 SGS2

If wep cracking is all you use backtrack for then there is no reason for you to download this.... you can crack wep from any linux distro...hell you can crack wep from a windows box if you wanted. There are many many many more reasons to use bactrack than "hax0ring w1f¡s"

sw33t had to click the thanks button on this one....
n1nj4dude said:
If wep cracking is all you use backtrack for then there is no reason for you to download this.... you can crack wep from any linux distro...hell you can crack wep from a windows box if you wanted. There are many many many more reasons to use bactrack than "hax0ring w1f¡s"
Click to expand...
Click to collapse

I want to install this partially just for fun, but how would I uninstall this should I realise I need the space? Just delete the associated files?

I dont know if anyone is interested (or may already being doing this) but something i figured out when using this on my tablet, if you would like to transfer files to and from your phones memory and BT5 memory download an app from the market called "SwiFTP" run it, then go into BT5 and "connect to server" enter all the details and you are now "connected" to your phones drives

Is it neccesary to put on the SD card or can you put it on the internal memory?

tiwey said:
Is it neccesary to put on the SD card or can you put it on the internal memory?
Click to expand...
Click to collapse
SD Card is internal memory in this case. If it was on the External Card it would be /SD_Card/External_SD or something like that

Who is the dev for this? I wasn't to contact them about a few suggestions
Sent from my SAMSUNG-SGH-I777 using xda premium

Related

[DEV] BACKTRACK 5 on Xperia X10 chroot

==================== WIFI / WEP / WPA2 CRACKING Questions will not be answered ========
============== Already Stated many times monitor mode and packet injection is not working. ========
==================== POST 3 updated with some FAQ ===============================
==================== DETAILED INSTRUCTIONS UPDATED ===========================
==================== DOWNLOAD LINK UPDATED : Alternate Download Links ===============
========== PROJECT PAGE CREATE : http://hackomania.com/BT5/ ====================
Hi all,
Based on my work here DEVELOPMENT : Ubuntu Lucid CHROOT: updated script
I have been successful on Making Backtrack run on Xperia X10i.
Wanted to be the first one to report it so the thread here.
will start uploading the files once i get get all pieces together.
posting some screenshots for non believers.
Stay tuned for complete instructions on how to set up on X10i complete with custom scripts and all codes will be open sourced for your reference.
and this time it will be completely from gscript if you don't want to type commands.
Teaser screenshots for you.
Now will need support from the fellow developers in establishing what all tools are running fine and what not.
once i upload the image i will also post this on all social network so that we can gather as much support as possible.
File size : under 500 MB
======== FILE DOWNLOAD LINK================
DROPBOX links Bitlied for download count track
Alternate link from personal server.
Please do not create mirror : just want to keep a count on download's
PART 1 : Download Link : http://bit.ly/p1BT5
PART 2 : Download Link : http://bit.ly/BT5p2
PART 3 : Download Link : http://bit.ly/BT5p3
bt7z.001: http://www.mediafire.com/?x9cgxzdx84vc6uj
bt7z.002: http://www.mediafire.com/?xaoidipkg1o7vgo
bt7z.003: http://www.mediafire.com/?po3nznbxgvdipur
MD5 Sum : Thanks to DooMLorD
558ecb1f0e5feb1da86526df8761e6cc bt.7z.001
247842fd0d3ebb39454f76f4704d1537 bt.7z.002
f74d2f744434a7182b13287d9f8165e7 bt.7z.003
Bundle Link : http://bit.ly/iNHTS0 <- contains list of all 3 files in one bundle.
Note : uploading in one alternate location : mediafire will give its link soon.
======== Instructions =============
*********** ESSENTIALS ******************
Rooted Android. tested on 2.2 however should work on 2.1 and 1.6 also. (if you use custom rom's you meet the criteria)
Busybox configured (although it gets automatically configured @ rooting)
Android terminal application. (I use android terminal emulator)
Android VNC Viewer
********************************************
********** STEP's *************************
download all 3 parts of image and place them in single folder.
extract using first file and you will get following files
bt
bt.img
startbt
stopbt
installbt.sh
Copy these files on your phone under /sdcard/bt
using terminal emulator run following commands
Code:
su
cd /sdcard/bt
sh installbt.sh
Now your BT should be configured automatically.
to use your BackTrack you can use following commands.
startbt <- mounts and prepares the system for usage.
stopbt <- unmounts and free up all resources.
bt <- a command line version of BT chroot.
Inside bt shell.
ui <- will start vncserver (default password is 12345678, you can change it using vncpasswd command on bt shell)
killui <- stops the running vncserver.
Any Available VNC client can be used to connect to the BT GUI.
Nick : BackTrack (bt for short)
address : localhost
port : 5901
password : 12345678
inside vnc window select input mode (following works best for me)
Touch Mouse; D-Pad Pan
Mouse pointer control mode
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
*********** DO CHECK POST 3 after tonight ******************
Post 3 will be updated to be used as a catalogue of tips and tricks for all things related to this distro..
========= TIPS and TRICKS ==================
this section is for those who want to make simmilar image from base image on backtrack.
ohk so the basic challenge is
1) BacckTrack image is for Xoom and have following limitation w.r.t. Xperia X10.
a) File is 4.9 GB (vfat has limitation of 4 GB max)
b) vncserver resolution is 1280x800 per xoom.
2) installation script and setup script doesn't allow you to move in and out of BT.
3) it used loop2 for image mounting which conflicts with APP2SD.
so I have made following changes.
1) resized image to 3.3 GB (if space get filled we can extend image to upto 700 mb more.)
2) inserted my custom ui and killui code i use @ ubuntu.
3) provided startbt stopbt bt and installbt.sh scripts for all work.
4) changed loop no to 254 and hence this code is compatible with my ubuntu image effectively you can keep both in same sdcard...
I am attaching a log file for part 1 of the image work as this is very tricky.
The trick is if you create a new file of 3.3 GB you get limited set of inodes which get filled easily. so the command mke2fs must be supplied with inode numbers that you want to be build.
check attached txt for details.
============ SCREEN SHOTS =================
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
========= FAQ plus TIPS and TRICKS =====================
Q : Installbt.sh script not working properly i am recieving errors?
A: please cross check all steps if you have missed any.. otherwise post the output of error's in thread.
Q : sh installbt.sh works fine now i am getting errors in startbt or bt command.
A : please check following steps.
Try rebooting the device and see if startbt and then bt works. if still error post the error output on thread.
post output of following command
mount
echo $PATH
busybox
which busybox
Q: what is the use of all the files besides bt.img
A : Listed is the description of all files.
1) sh installbt.sh is to be only used once in liftime. till you flash a new rom.
2) startbt is to be used once after every reboot.
3) bt is command to be used everytime after first use of startbt to get command prompt.
4) stopbt is to be used when you want to stop the bt service which is running in the background.
4) and inside the [email protected] prompt you can use ui and killui command to start and stop the vncserver.
anantshri said:
Hi all,
Based on my work here DEVELOPMENT : Ubuntu Lucid CHROOT: updated script
I have been succefull on Making Backtrack run on Xperia X10i.
Wanted to be the first one to report it so the thread here.
will start uploading the files once i get get all pieces together.
posting some screenshots for non believers.
Stay tuned for complete instructions on how to set up on X10i complete with custom scripts and all codes will be open sourced for your reference.
and this time it will be completely from gscript if you don't want to type commands.
Teaser screenshots for you.
Now will need support from the fellow developers in establishing what all tools are running fine and what not.
once i upload the image i will also post this on all social network so that we can gather as much support as possible.
=========RESERVED for instructions =============
Click to expand...
Click to collapse
Nice work keep going.
Sent from my X10 TripNMiUI
Is it for real ?! Wow! Can't wait!!!
hoho it will be great
Brilliant work my friend!!!
Does it still require VNC server/client?
Does pen-testing work? What about arp poisoning and promiscus mode to gather data packets?
sent from FreeX10_beta4+CM6 settings
DooMLoRD said:
Brilliant work my friend!!!
Does it still require VNC server/client?
Does pen-testing work? What about arp poisoning and promiscus mode to gather data packets?
sent from FreeX10_beta4+CM6 settings
Click to expand...
Click to collapse
slow down buddy.... just got the image up and running tools still need to be tested.....
and ya it still needs vnc that's why still chroot.
OMG MAN! I remember asking backtrack in your thread long time back for WEP cracking!
You are the best man! I love your work!
Thank you for listening!
WOOOOOOOOOO.
Awesome work!
That is frigging awesome....
Sent from my X10project using XDA App
anantshri said:
============ SCREEN SHOTS =================
Click to expand...
Click to collapse
A true Hero to the open world!
Wow, nice work
Sent from my X10 TripNMiUI using XDA Premium App
What does that mean though. Like what will we need to do
Sent from my X10a using XDA Premium App
Sorry, but what is backtrack? Some sort of UI?
Mister J said:
Sorry, but what is backtrack? Some sort of UI?
Click to expand...
Click to collapse
"BackTrack is a GNU/Linux distribution distributed as a Live DVD aimed at digital forensics use and penetration testing."
Ref.: http://en.wikipedia.org/wiki/BackTrack
so its not a UI....
its a Debian based linux OS
Lion3494 said:
What does that mean though. Like what will we need to do
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
I am just finished optimizing files and installation script ....
uploading soon...
file size : under shades on 700 MB....
P.S. : Backtrack has given a 1.1 GB file to download this is same with few simple tweaks.
tweaks and tips uploaded on first post...
How is the performance? Just two weeks left and then I'm done with my final exams, so after that I am going to learn more about all this chrooting and dualbooting stuff!
Well done mate!
Meikrekel said:
How is the performance? Just two weeks left and then I'm done with my final exams, so after that I am going to learn more about all this chrooting and dualbooting stuff!
Well done mate!
Click to expand...
Click to collapse
I need testers badly.... to my my baby will always run faster...
also one more tweak found that tmp folder contained framework.bz2 and msf3 decompressed folder deleted both freedup lots of inodes and now image size going down....
from 700mb of initial size i am down to < 500 MB
testing
ill test it for you what exactly is works /not?
wi-fi?

[DEV] BACKTRACK 5 on SGS2 (chroot) [UPDATED: 12/July/2011]

\\----[ Announcement ]----//
[12/July/2011] Updated with new package (bt5_sgs2_shell_scripts_v2.zip) containing shell scripts & busybox
//----[ Announcement ]----\\
hi guys DooMLoRD & anantshri present to u:
BACKTRACK 5 on SGS2
all the work was done by anantshri, i mostly assisted by testing it on my SGS2 and modding it slightly so that it will work properly for SGS2... dont forget to thank him!
i will try n keep it short and simple...
for more details u can read the original thread at X10 sub-forums...
[DEV] BACKTRACK 5 on Xperia X10 chroot
[ Screenshots ]
on startup (shell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in GUI:
phone + BT5 GUI:
[ Requirements ]
rooted device with busybox installed, if u are using CF-root kernel then u already have busybox installed
Some apps from Android Market:
Android Terminal Emulator
androidVNC
[optional] highly recomended keyboard: Hacker's Keyboard
7zip (for PC), for extracting the files
around 3.3 GB free on internal sdcard (/sdcard/)
[ How To : File Setup ]
u need to do this only once
download the files from the links provided in this thread
extract the files using 7zip to a temporary folder (needs 3.3GB free on that drive)
connect ur SGS2 to PC and mount USB storage
create a folder named 'bt' (without quotes) in the root of ur sdcard and copy the bt.img in that folder
also place the file bt5_sgs2_shell_scripts_v2.zip in root of sdcard, this file has to be flashed via recovery
once u verify that the above is correct then un-mount usb storage
reboot into recovery and flash the file bt5_sgs2_shell_scripts_v2.zip stored in root of sdcard (or if u are using CWM app then just select the file for flashing and the app will do the rest )
once ur phone reboots into OS just check the /sdcard/bt folder
final directory structure should look like this:
/sdcard/bt/bt
/sdcard/bt/bt.img
/sdcard/bt/installbt.sh
/sdcard/bt/startbt
/sdcard/bt/stopbt
once u verify that the above is correct then u can proceed
[ How To : Launch BT ]
start Terminal Emulator app on ur SGS2 and enter the following commands step by step (accept/allow any SuperUser request/popup that u may receive)
su
cd /sdcard/bt
sh installbt.sh
startbt
bt
now u are in BackTrack5 shell
to launch GUI (vncserver) enter the following command
ui
now note the number N shown localhost:N
e.g. as u can see from the above image that "New 'X' desktop is localhost:1", so N=1
the vncserver is running at (5900 + N, N=1 ; so server port is 5901)
now launch androidVNC app on phone and fill in the detials as follows
Nick : bt
Address : 127.0.0.1
Port : 5901
Password : 12345678
Username : <leave it blank>
Color Format : 24-bit color (4 bpp)
inside vnc window select input mode (i personally recommend the following)
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
and then press connect... now u are in BackTrack GUI!
if u want to exit/close BT5 then u need to follow these steps:
close the androidVNC app (Menu -> Disconnect)
go back into Terminal Emulator app and enter the following commands
u should be at this shell [email protected]:~#
killui
exit
now u will get back to this shell> #
now enter the following commands to stop bt and exit
stopbt
exit
exit
u can now exit the Terminal Emulator app
i would also recommend that u reboot ur phone
[ Important Info ]
root password is 12345678
[ Download Links ]
update.zip package containing shell scripts, busybox (which gets installed to temporary location) [to be flashed via recovery]
this will not disturb/conflict with busybox of ur ROM/CF-Root kernel
bt5_sgs2_shell_scripts_v2.zip (~800KB)
main bt.img
these links are 7zip archives split into 50mb files, u will need to download the following:
total size: 486MB
bt.7z.001 (50 MB)
bt.7z.002 (50 MB)
bt.7z.003 (50 MB)
bt.7z.004 (50 MB)
bt.7z.005 (50 MB)
bt.7z.006 (50 MB)
bt.7z.007 (50 MB)
bt.7z.008 (50 MB)
bt.7z.009 (50 MB)
bt.7z.010 (36 MB)
also uploading to mediafire for mirroring...
Mediafire Folder: http://www.mediafire.com/?f9gk3p3t9wip5
md5 hashes:
Code:
bt.7z.001 f19e769bf42b44867c8bb1d9bb9c5d44
bt.7z.002 a4dd26a98d2c6925d871fb108fb5fadb
bt.7z.003 ecca5a5d72c449117b1d3dbc23aeb1a2
bt.7z.004 8ad487a01e4d149f0247ad9288201f32
bt.7z.005 adab9cb3778cd8ac89ccc0e21997c3d7
bt.7z.006 ba6a28de70a1115dc316f45cea508215
bt.7z.007 f59757e891631607e1a35abadb231b3b
bt.7z.008 cdb8c28a1fbd03657bb42e8d69f0600b
bt.7z.009 426d892f872679e3d53d0ebb0376e138
bt.7z.010 c7d2957bc65340d967b9dd3646d7cb39
ENJOY!
[ Tips n Tricks! ]
if u have ur device (SGS2) connected over wifi u can connect to the BT5 vncserver running on ur phone!! u will just need to connect to
<ip_address_of_phone>:<portno>
most of the startup/launching commands can be executed even through adb shell
==== Reserved ===
few pointers as this has been asked many times
1) Monitor Mode will not work till someone tried to compile a custom wifi drivers with monitor mode enables, in that case also firmware should allow it.
2) Those using android-vnc-viewer and facing difficulty in navigation check various input modes.
These 3 works the best for me.
Touch Mouse; D-Pad Pan
Mouse pointer control mode
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
Excellent. I've been wanting to do this.
Back Track is running smoothly on my SGS2 with Lite'ning ROM.
files uploaded to personal direct download server!
links updated
also uploading to mediafire for mirroring...
http://www.mediafire.com/?f9gk3p3t9wip5
will post these links in few hours!
ENJOY BT5 on ur SGS2
Great!! Thank you. Will test and post soon.
i get an error:
here is a problem ith the configuration server (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256)
any solution?
piffpaff said:
i get an error:
here is a problem ith the configuration server (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 256)
any solution?
Click to expand...
Click to collapse
which files did u try? i have changed anantshri's original images and uploaded working one for SGS2... please download the files from the first post!
if u are still getting that error do let me know...
Very nice
Thanks alot
ok i load the wrong files from other thread.
thx
piffpaff said:
ok i load the wrong files from other thread.
thx
Click to expand...
Click to collapse
please test these ones and post ur feedback!
thank u for testing!
Archive
When I extract the archive, I only end up with bt5.img, and none of the other files
I downloaded the files from the first post. Any insight as to what the problem might be?
034 said:
When I extract the archive, I only end up with bt5.img, and none of the other files
I downloaded the files from the first post. Any insight as to what the problem might be?
Click to expand...
Click to collapse
sorry had forgotten the shell scripts:
here they are:
bt5_sgs2_shell_scripts.zip (2 KB)
i have also updated the 1st post with details...
[ How To : File Setup ]
u need to do this only once
download the files from the links provided in this thread
extract the files using 7zip to a temporary folder (needs 3.3GB free on that drive)
connect ur SGS2 to PC and mount USB storage
create a folder named 'bt' (without quotes) in the root of ur sdcard
final directory structure should look like this:
/sdcard/bt/bt
/sdcard/bt/bt.img
/sdcard/bt/installbt.sh
/sdcard/bt/startbt
/sdcard/bt/stopbt
once u verify that the above is correct then un-mount usb storage
blimey so how much of backtrack actually works? Struggling to see the wep/wpa stuff working..Anyone?
Bloody hindering awkward to use as well. Good job but hmm, little tough to use.
Bed...
mrdegriz said:
blimey so how much of backtrack actually works? Struggling to see the wep/wpa stuff working..Anyone?
Bloody hindering awkward to use as well. Good job but hmm, little tough to use.
Bed...
Click to expand...
Click to collapse
1) wep/wpa crack will not work till we get monitor mode in wifi drivers.
2) if it feels awkward do check the various input methods you have for vncviewer.
(following works best for me)
Touch Mouse; D-Pad Pan
Mouse pointer control mode
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
it works fine.
thx for your work
nice work man..... I've been looking to work on gs2.thanks man
Nice work once again Doom! Glad to see a familiar poster from the X10 days.
Willing to try this but not at the expense of normal roms. Hopefully one day we get to dual-boot this and a rom/fw of our choice.
admartian said:
Nice work once again Doom! Glad to see a familiar poster from the X10 days.
Willing to try this but not at the expense of normal roms. Hopefully one day we get to dual-boot this and a rom/fw of our choice.
Click to expand...
Click to collapse
well this doesnt change anything in ur rom...
it runs from within /sdcard/bt (actually it runs from the bt.img file)
so its completely safe to try...
dualbooting is really tempting... would be possible... will see wht can be done...
Any advice on setting screen resolution in such way so it doesn't scroll a bit to the left or right?
Swyped from my Galaxy S II using Tapatalk

[DEV] BACKTRACK 5 on HTC Flyer (chroot) [Dt: 14/Jan/2012]

hi guys here is BACKTRACK 5 on HTC Flyer
most of the work was done by anantshri, i have only modified it slightly so that it will works properly on HTC Flyer... dont forget to thank him!
i will try n keep it short and simple... this is running in chroot environment and doesnt boot as a separate OS... it can be accessed through shell or via a VNC client..
for more details u can read the original thread at X10 sub-forums...
[DEV] BACKTRACK 5 on Xperia X10 chroot
if u dont know what Backtrack is read this: http://bit.ly/z23em2
[ Screenshots ]
on startup (shell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in GUI:
BT5 on tablet:
[ Requirements ]
rooted device
Some apps from Android Market:
Android Terminal Emulator
androidVNC
[optional] highly recomended keyboard: Hacker's Keyboard
7zip (for PC), for extracting the files
around 3.3 GB free on external sdcard (/sdcard/ext_sd/)
[ How To : File Setup ]
u need to do this only once
download the files from the links provided in this thread
extract the files using 7zip to a temporary folder (needs 3.3GB free on that drive)
connect ur device to PC and mount USB storage
create a folder named 'bt' (without quotes) in the root of ur external sdcard and copy the bt.img in that folder
also place the file bt5_flyer_shell_scripts_v1.zip in root of sdcard, this file has to be flashed via recovery
once u verify that the above is correct then un-mount usb storage
reboot into recovery and flash the file bt5_flyer_shell_scripts_v1.zip stored in root of sdcard
once ur phone reboots into OS just check the /sdcard/ext_sd/bt folder
final directory structure should look like this:
/sdcard/ext_sd/bt/bt
/sdcard/ext_sd/bt/bt.img
/sdcard/ext_sd/bt/installbt.sh
/sdcard/ext_sd/bt/startbt
/sdcard/ext_sd/bt/stopbt
once u verify that the above is correct then u can proceed
[ How To : Launch BT ]
start Terminal Emulator app on ur device and enter the following commands step by step (accept/allow any SuperUser request/popup that u may receive)
su
cd /sdcard/ext_sd/bt
sh installbt.sh
startbt
bt
now u are in BackTrack5 shell
to launch GUI (vncserver) enter the following command
ui
now note the number N shown localhost:N
e.g. as u can see from the above image that "New 'X' desktop is localhost:1", so N=1
the vncserver is running at (5900 + N, N=1 ; so server port is 5901)
now launch androidVNC app on phone and fill in the detials as follows
Nick : bt
Address : 127.0.0.1
Port : 5901
Password : 12345678
Username : <leave it blank>
Color Format : 24-bit color (4 bpp)
inside vnc window select input mode (i personally recommend the following)
TouchPad (here your screen works like a big touchpad use it to navigate mouse.)
and then press connect... now u are in BackTrack GUI!
if u want to exit/close BT5 then u need to follow these steps:
close the androidVNC app (Menu -> Disconnect)
go back into Terminal Emulator app and enter the following commands
u should be at this shell [email protected]:~#
killui
exit
now u will get back to this shell> #
now enter the following commands to stop bt and exit
stopbt
exit
exit
u can now exit the Terminal Emulator app
i would also recommend that u reboot ur phone
[ Important Info ]
root password is 12345678
[ Download Links ]
update.zip package containing shell scripts, busybox (which gets installed to temporary location) [to be flashed via recovery]
this will not disturb/conflict with busybox of ur ROM/CF-Root kernel
bt5_flyer_shell_scripts_v1.zip (~800KB)
main bt.img
there are two sets of files... for those who dont have a very stable connection i have provided small 50MB (x 10) packages while for others who have a stable connection i have provided 250MB (x 2) packages... both contain the same file bt.img but for the convenience of users i have created these two sets... if u have already downloaded one set u do not need the other set...
KINDLY DO NOT MIRROR OUR FILES
SET 1
these links are 7zip archives split into 50mb files, u will need to download the following:
total size: 486MB
bt.7z.001 (50 MB)
bt.7z.002 (50 MB)
bt.7z.003 (50 MB)
bt.7z.004 (50 MB)
bt.7z.005 (50 MB)
bt.7z.006 (50 MB)
bt.7z.007 (50 MB)
bt.7z.008 (50 MB)
bt.7z.009 (50 MB)
bt.7z.010 (36 MB)
md5 hashes:
Code:
bt.7z.001 f19e769bf42b44867c8bb1d9bb9c5d44
bt.7z.002 a4dd26a98d2c6925d871fb108fb5fadb
bt.7z.003 ecca5a5d72c449117b1d3dbc23aeb1a2
bt.7z.004 8ad487a01e4d149f0247ad9288201f32
bt.7z.005 adab9cb3778cd8ac89ccc0e21997c3d7
bt.7z.006 ba6a28de70a1115dc316f45cea508215
bt.7z.007 f59757e891631607e1a35abadb231b3b
bt.7z.008 cdb8c28a1fbd03657bb42e8d69f0600b
bt.7z.009 426d892f872679e3d53d0ebb0376e138
bt.7z.010 c7d2957bc65340d967b9dd3646d7cb39
i am also uploading a different set where-in the files are split into 250MB parts... but that upload is taking time
OR
SET 2
these links are 7zip archives split into 250mb files, u will need to download the following:
total size: 486MB
part1
part2
md5 hashes:
Code:
bt.7z.001 fea6299bfa1677bd344d478108d458b2
bt.7z.002 b3897170d1f05dd0fb812fd092411203
ENJOY!
reserved for later
Nice job! Will this also work on GB?
AidenM said:
Nice job! Will this also work on GB?
Click to expand...
Click to collapse
yups should work irrespective of android OS version
DooMLoRD said:
yups should work irrespective of android OS version
Click to expand...
Click to collapse
Cool beans trying it out now
I was just wishing someone would port Linux to the flyer the other day, and here it is, like magic. I'm glad we have you as a dev, you always seem to think outside the box. I'm kinda sad it came at the end of my break, but I will definitely be giving this a try next time I have some spare time. Thanks!
Sent from my mobile typewriter with tapatalk
thx
Works fine on GB flyer
Very Nice........
First, I would like to show me appreciation for this nice piece of art!
Second, would it be ok if I copied the script files manually on me rooted device instead of flashing it ?
Thanks again.........
jaguaralani said:
Very Nice........
First, I would like to show me appreciation for this nice piece of art!
Second, would it be ok if I copied the script files manually on me rooted device instead of flashing it ?
Thanks again.........
Click to expand...
Click to collapse
I recommend that u should flash them via recovery...
Sent from my HTC Flyer P510e using XDA App
So, I can't open the second part of the two 250mg files. It tells me it can't be opened as an archive. The first part works.
devator22 said:
So, I can't open the second part of the two 250mg files. It tells me it can't be opened as an archive. The first part works.
Click to expand...
Click to collapse
Bump?
Sent from my mobile typewriter with tapatalk
devator22 said:
Bump?
Sent from my mobile typewriter with tapatalk
Click to expand...
Click to collapse
second part cant be seperately opened...
open the first file and it will open all further parts
DooMLoRD said:
second part cant be seperately opened...
open the first file and it will open all further parts
Click to expand...
Click to collapse
Oh, okay. Thanks for the answer, I was about ready to give up.
Sent from my mobile typewriter with tapatalk
Thanks a lot! I've edited the scripts a bit and managed to run this from internal sd card (my ext_sd is just 2GB). It's all working fine, when I'll get home from work I will try to find out how usefull this can be
PS: Never thrust a bit.ly link, it's almost always a lmgtfy link
Thanks for all the info I got everything setup and working. Can we put the wifi into monitor mode? Not really sure where to go from here. Thanks.
cmantis said:
Thanks for all the info I got everything setup and working. Can we put the wifi into monitor mode? Not really sure where to go from here. Thanks.
Click to expand...
Click to collapse
Nope, no driver support.
It's in the kernel
barry99705 said:
Nope, no driver support.
Click to expand...
Click to collapse
The AOSP kernel is currently dev'ing, and monitor mode is possible for the View/Flyer as they use a very common chip (Broadcomm 5823) The information for this chip is on xda, but I don't have time to search it, will edit later.
how i can use virtual/hacker keyboard with GB? i got an empty bar in GB when in HC is fixed. how i can keyboard appear? send text function is a bit annoying
Anything new about the monitor mode???
doctorlirio said:
Anything new about the monitor mode???
Click to expand...
Click to collapse
Does HDMI output not work wheil runing BT5?

CHROOT Lubuntu and Ubuntu 10.10

Hi
It's a thread which collects Ubuntu stuff for SGS2 and includes some of my mods.
The content is from or based on fire314's, JDouce's and zacthespack's work. And their work is based on other people's work, so thanks everybody
Why is it better, than the sources I used?
-it's up to date
-works
-smallest download size
-less space required on sd/internal storage
-very detailed instructions
Why to use Ubuntu on an Android phone?
Why to overclock?! Just because we can do it To show off
And you can use Chromium browser to browse the web, you can edit documents in Open/Libre Office, etc.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
I recommend this Lubuntu img, made by zacthespack, edited by me.
It's less than 500MB to download, 1800MB img file size on the phone, and sports LXDE (leightweight desktop):
Filehosting.org
Ubuntu One
Dropbox
Google docs
It is the necessery script to run Ununtu/Lubuntu, made by fire314:
ubi.sh
Ubuntu One
Dropbox
It is an Ubuntu img (Gnome desktop), made by JDouce, modded by me.
It's almost 1GB to download and 2,5 or 3GB (I don't remember) on the phone:
Depostie Files
Fileserve
Then, there is the one made by JDouce without any mod.
Almost 1,5GB to download in 2 parts, and 3,5GB (as I remember) on the phone:
Part 1
Part 2
The original from zacthespack:
Link to he's thread
He works on it, and uploads new versions, so no need to place a link for the file itself.
There are 2 versions now:
Ubuntu - 1,5GB to download and 3,5GB on phone
Lubuntu - 500MB to download and 2,5GB on phone
Instructions:
1. Choose one of the images (will add more later) and download it, and get the script aswell
2. Unzip ubuntu.img and copy it and ubi.sh to your sdcard or internal storage, both files to the same folder
3. Open a terminal emulator and type:
su
Accept root permission request if appears, then type:
cd (name of the place where the files are. Example: cd /sdcard)
You can check if the files are there by typing „ls”. If everything is fine, than type:
sh ubi.sh
like this:
and if everything is fine you get this:
4.Open a VNC client and fill out the following
password: ubuntu
address: localhost
port: 5900
set colors to 24bit
5. Hit Connect button
6. Now you should set the "mouse"
touch Menu button
Input mode
Touchpad
Turning it off:
In the VNC client:
touch Menu button
Disconnect
In the terminal emulator:
touch Menu button
Close window
accept it
You can add, delete programs in Synaptic.
If you want to start Lubuntu/Ubuntu anytime, just do the 3rd and 4th steps ; )
I didn't do much. I just made some small changes. All the credits go to zacthespack, JDouce and fire314.
I know, that JDouce has a thread, but he doesn't do much nowadays. He edited the OP more than 5 months ago. And I think it's such a fun, that it deserves some more attention.
Troubleshooting:
If it doesn't start after step 4, or your phone reboots after step 3:
change kernel!
Siyah 2.6.8 changelog:
-fixed the bug which prevented using ubuntu and was causing some random reboots...
so earlier versions doesn't work
If it starts, but the mouse pointer doesn't move:
check the step 6 in the OP
If you can't read or mount the sdcard/internal storeage after turning Ubuntu off:
reboot
Download links are up!
Let me know which one is the fastest and where would you like to see the next versions uploaded.
And if you have any question or suggestion, don't hold it back
Unbuntu One link is a ~20 min DL. Dropbox is ~5 min.
sh may have taken 0.01 seconds or so
Hope to test this today, if not, soon. I'll let you know how things work.
reupload screenshots.....
gh.rohit said:
reupload screenshots.....
Click to expand...
Click to collapse
is there some problem with them?
liljom said:
is there some problem with them?
Click to expand...
Click to collapse
I see them.
mudferret said:
Unbuntu One link is a ~20 min DL. Dropbox is ~5 min.
sh may have taken 0.01 seconds or so
Hope to test this today, if not, soon. I'll let you know how things work.
Click to expand...
Click to collapse
sounds good
Amazing Makes me wonder, can you install the Android SDK on it?
kblood said:
Amazing Makes me wonder, can you install the Android SDK on it?
Click to expand...
Click to collapse
AFAIK yes
funny, isn't it?
Exiting chroot environment and sync'ing memory to storage..
DO NOT EXIT until finished - doing so may corrupt the ubuntu.img!
This is what i get after " sh ubi.sh " i cant connect from vnc , help please
Nice to see you here
Sent from my GT-I9100 using xda premium
burimii said:
Exiting chroot environment and sync'ing memory to storage..
DO NOT EXIT until finished - doing so may corrupt the ubuntu.img!
This is what i get after " sh ubi.sh " i cant connect from vnc , help please
Nice to see you here
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
what kernel do you use?
can you try it with speedmod kernel?
liljom said:
AFAIK yes
funny, isn't it?
Click to expand...
Click to collapse
I am looking for a way to get Asus Transformer Prime capable of developing Android Apps, so it might not just be funny, but also very useful
I did try to see if I could make my SGS2 dual boot, but it did not work for me so far. And I am not sure I would want this as the phones OS, although it is temping if it can also use one of those Android App players that seems to be in development. I am not sure if they are even trying to target Linux though.
But the possiblities of Linux on Android hardware is.... mindbogging
liljom said:
what kernel do you use?
can you try it with speedmod kernel?
Click to expand...
Click to collapse
Syiah 2.6.11 , I will try it later because I just installed cm9 ...
Sent from my GT-I9100 using xda premium
It might be a stupid question, but is is possible to get Linux Mint to work on the Galaxy S II in the same way?
Tom-Helge said:
It might be a stupid question, but is is possible to get Linux Mint to work on the Galaxy S II in the same way?
Click to expand...
Click to collapse
Ask zacthespack. As I know, he built the image I modded in the OP
4 more images in the OP
And I'll take a look at the v5 from zacthespak... downloading it right now
sorry for my question: this is a rom or what?
KSTu said:
sorry for my question: this is a rom or what?
Click to expand...
Click to collapse
no, it runs from a ROM and it's Ubuntu linux
I like it and it runs faster than the other ubuntu 10.10 chroot release but my only problem is something seems wrong with the resolution the text is smaller and blurrier than the other release from before? Is it set for the galaxy s2 screen res or am i just seeing things?

[MOD] Run Ubuntu 10.10 on your SGS2

http://forum.xda-developers.com/showthread.php?t=1223128
^Original thread in the I9100 forum by: Jdouce^
Should work on SGH-i777 as well... Just thought I'd share.
(edit) TESTED -and this does in fact work. You can even access the Linux UI via any VNC viewer as long as you're on the same network as your phone or tethered. I have added to the tutorial below to specify. You can also access your Android file system and access everything via this image. I leave you to drool.
***(edit 2) If you can't figure it out, I have found Ubuntu installers available on the Market, but they require you to use your internal storage space. This version can be installed on either internal OR external memory. The performance and UI of this version is better too. The versions available via app are not optimized as well as this one. =) - Just know that there is a foolproof way to accomplish this if you can't read directions... Just search "ubuntu" in the Market.
-----Original Post (with clarifications and additions by Monsieurtalbot)-----
DO NOT UPDATE UBUNTU TO 11.04/11.10 IT'S HORRIBLY SLOW AND BREAKS THE .IMG! -
YOU CAN HOWEVER INSTALL ANY OTHER UPDATES AND APPS JUST FINE.
1. Download the Ubuntu files (2 part .rar)
File sizes should be;
Part1 = 900 MB
Part2 = 572 MB
Part1 Download
Part2 Download
2. Open Part1 and unrar the folder and copy to your internal sdcard (/sdcard) OR external SD card (/sdcard/external_sd) - this unrar's both parts.
**there should be 2 files - "ubuntu.img" & "ubuntu.sh" - these go into an "ubuntu" folder in one of these locations.
3. Open the Market (now Play Store) - download and install terminal emulator and Android VNC viewer - Both free.
4. Open Terminal emulator. Depending on where you copied the files mentioned in step 1/2, enter ONE of the following sets of commands.
**Remember. Commands and directories are case sensitive, so make sure everything (including the file names and folder title) is lowercase to make it work.
(if you copied to the INTERNAL sdcard)
Code:
cd /sdcard/ubuntu
su
sh ubuntu.sh
(if you copied to the EXTERNAL sdcard)
Code:
cd /sdcard/external_sd/ubuntu
su
sh ubuntu.sh
press home - and DO NOT CLOSE the terminal. You need to keep this shell open.
(you can also get an app called "Script Manager" from the Play Store to make re-entering these commands simple later.)
5. Open the Android VNC viewer and connect using the following settings.
Code:
address: localhost
port: 5900
password: ubuntu
set color to 24 bit
You can also use a VNC viewer on a PC or tablet to access the Linux UI, and use the keyboard and mouse using your favorite VNC viewer (I was using TightVNC on Windows) with the following settings while both devices are connected to the same WIFI (or tethered to the phone)
Code:
address: (your phone's local IP address here)
port: 5900
password: ubuntu
set color to 24 bit
VOILA - You now have Ubuntu 10.10 running on your device.
6. WHEN FINISHED- Shut down Ubuntu in the UI, disconnect VNC, then in the Terminal Shell type: "exit" without quotes and press <enter> to clean up the Linux image mount for next boot. Failure to do this may result in a corrupt install. Once you see a "#" with no commands, it is safe to close the terminal window.
_______________________________________________________
Whats Working?
USB Host - Using adapter cable available online to attach keyboard, mouse, or Flash drives.
WiFi
3G
Browsers- any of them... I suggest Chromium over Firefox, but they both do the trick.
Installing Applications
Updating (NOT UPGRADING to 11.04/.10)
Its pretty much working, let the OP (linked above) know if you have issues.
***HELP! UBUNTU WORKED BEFORE, BUT NOW IT WON'T BOOT-
The image creates a new folder to mount the Linux files at "data/local/mnt"... Connecting USB to a PC, unmounting the storage device the image is stored to, a forced shut down, or unexpected occurance in the shut down procedure CAN cause this. It's due to "stuck" files in that directory. -Attempt to clear the contents of this folder - followed by a reboot if you have any issues. You can do this using root explorer, or with the following terminal commands.
Code:
su
rm r /data/local/mnt
GOOD LUCK!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-----END OF ORIGINAL POST-----
Downloading now. I would love a great workiing version of this os on my sgs2
May I ask what kernel you use? I get a "VNC connection failed" when trying to connect, on Siyah 2.6.12.
Fallen Advocate said:
May I ask what kernel you use? I get a "VNC connection failed" when trying to connect, on Siyah 2.6.12.
Click to expand...
Click to collapse
Entropy's Daily... Latest always... Although it shouldn't matter.
How do you clear the memory?
Interesting tweak, thanks for sharing.
Very interesting will definitely try this out. Has anyone got.it running yet?
Sent from my SAMSUNG-SGH-I777
What does an OS do on android? Does it make it like a PC? Hows it look/interact on the screen?
Sent from my SAMSUNG-SGH-I777 using XDA App
IVIadness said:
How do you clear the memory?
Click to expand...
Click to collapse
By shutting down, disconnecting VNC, and closing the terminal window.
Edgarhighman said:
What does an OS do on android? Does it make it like a PC? Hows it look/interact on the screen?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
It is a FULL version of Ubuntu 10.10.
Google, FOOL! ;-)
Nizda1 said:
Very interesting will definitely try this out. Has anyone got.it running yet?
Sent from my SAMSUNG-SGH-I777
Click to expand...
Click to collapse
If you can copy 2 files to an ubuntu folder on the root of your SD, install 2 apps in the market, and type in 3 commands, you can get this running.
Simple, eh?
What happens if I want to go back to android os?
EDIT: Sorry, I skipped the part that said that it was an emulator.
EDIT 2: I didn't know anything about Android back then...
Having problems running this past terminal. What Kernels can be used with this? NEAK? Siyah? I get this in terminal.
a/local/bin: $PATH
[email protected]:/ $
What am I doing wrong?
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
I'm on ICS 4.0.3 XWLPD (Shostock)
lolol i'm gonna build cm10 with this on my GS2. I'll see you guys in a few weeks.
The download links aren't working :/
I know this is an older post but can we get the links working again?
Sent From My SGH-S959G Using Tapatalk 2

Categories

Resources