[Q] i need help !! - XPERIA X8 Themes and Apps

is it possible to update droid os from 2.1 to 2.3 ??

Sai Surya said:
is it possible to update droid os from 2.1 to 2.3 ??
Click to expand...
Click to collapse
For xperia x8? 2.1 is the official limit,but u can go to 2.3 with custom rom...
Hope i answer u..
xperia x8 proud owner

Sai Surya said:
is it possible to update droid os from 2.1 to 2.3 ??
Click to expand...
Click to collapse
hi there is no sony ericsson update past 2.1 update 1. but using a custom rom you can update to 2.3.7.
things you need to do to update
1: root your x8 with super one click
2: install andro xplorer from market
3: get busybox, chargemon, xrecovery.tar and root explorer
4: install root explorer apk
5: using root explorer copy busybox to system/bin
6: using root explorer copy chargemon to system/bin
7: using root explorer copy x recovery.tar to system/bin
8: press and hold x recovery select permissions to
[x] [x] [x]
[x] [x] [x]
[x] [x] [x]
ie tick all the boxes
9: download fb21 as this will give you cwm
10: down load gdx v017 + Modules for stock kernel.
11: now put all 3 files fb21, gdxv017, Modules for stock kernel. in a folder on your sd card call folder x recovery
12: now turn of phone and turn it back on when you see the 1st sony ericsson logo push the back button repeatedly
13: now select backup/restore
14: make a back up of your stock system
15: select (full wipe)
16: select install custom zip
17: choose custom zip from sdcard
18: select x recovery
19: select fb21.zip
20: now reboot phone
21: now when you see the se logo tap your screen
22: do a (full wipe) then select install zip from sdcard
23: select choose zip from sdcard
24: select x recovery
25: select gdx v017
26: repeat step 20, 21, 22, 23, and 24
27: now select Modules for stock kernel.
28: now restart your phone and you will have 2.3.7
link for busybox: http://www.multiupload.com/04336TJT51
link for chargemon: http://www.multiupload.com/0DT11BA853
link for x recovery.tar: http://www.multiupload.com/FK1X3OWQBE
link for root explorer: http://www.multiupload.com/WNQ3R2O9QN
link for fb21: http://www.multiupload.com/RZX8SC908C
link for gdx v017: http://www.multiupload.com/00IXSHI9I4
link for .modules.for.stock.kernel: http://www.multiupload.com/WRP51P3OOS
I'm not to blame for any damage you mite do or if you brick you x8

Related

[FIX][ICS] WCDMA GSM switch v1.0

Hello!
Some Ice Cream Sandwich ROM's have strange BUG - After each reboot in Settings > Network Mode are set to "WCDMA (pref.) / GSM".
I found topic, tutorial and i make easy fix framowork.jar file and RIL.smali file to make own fixed framework.jar!
Credits, Source, More info: http://forum.xda-developers.com/showthread.php?t=2181763
Tested on:
- Ice Cream Speed
- ICS Orginal
Instruction:
- Download "WCDMA GSM switch FIX v1.0"
- Put into sdcard
- Go to CWM Recovery
- Instal flashable ZIP via Recovery
- Wipe "Cache and Dalvik Cache"
- Done!
Instruction to fixing own framework.jar:
- Download from here "RIL.smali" and copy somwhere on hard disk
- Download from here Smali-Me tool
- Extract on local harddisk (eg c:\Smali-Me-1.0)
- Find on your phone /system/framework/framework.jar
- Copy "framework.jar" somwhere to your harddisk
- Extract (winrar, TC, winzip) from "framework.jar" file "classes.dex"
- Copy "classes.dex" to \Smali-Me-1.0\
- Run baksmali.bat (as administrator) or open CMD i this folder and type "baksmali-1.4.0.jar -o Decompiled/ classes.dex"
- Go to \Smali-Me-1.0\Decompiled\com\android\internal\telephony\
- Copy/Replace downloaded and extracted "RIL.smali" (step 1) into \Smali-Me-1.0\Decompiled\com\android\internal\telephony\
- Copy all files from \Smali-Me-1.0\Decompiled\ to \Smali-Me-1.0\Smali-Me\
- Run "smali.bat" (as administrator) or open CMD i this folder and type "smali-1.4.0.jar Smali-Me -o modded-classes.dex"
- Delete old "classes.dex" from \Smali-Me-1.0\
- Rename "modded-classes.dex" to "classes.dex" in \Smali-Me-1.0\
- Add/replace (winrar, TC, winzip) new "classes.dex" into "framework.jar" which is somwhere on your harddisk (step 6)
- Copy/replace new "framework.jar" into your phone directory /system/framework/
- Reboot & Enjoy
Download:
- WCDMA GSM switch FIX v1.0
- RIL.smali (to make own fixed framework.jar)
Changelog:
v1.0 Beta
Initial release
Added CMW ZIP
Added RIL.smali to make own fixed framework.jar
Wow... Nice... I use hd ultimate 5 and have problems.... Thanks for a fix
Kuch can u make my jar for me...cause above fix not working for me
Sent from my MT25i using xda premium
walkwitmeinhel said:
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
Cus that's framework.jar for R800i but you can try use this tutorial: http://forum.xda-developers.com/showpost.php?p=41756670&postcount=82

[FONTs] Amazing 22 Android Fonts [ ZIP ] For Any Android Device

Amazing 22 Android Fonts​ :good:
You need :
- Rooted Device
- CWM Recovery
Install Instruction :
1. Download the ZIP file ( from the Attachment )
2. put the zip file in your phone
3. Go to CWM recovery
4. install zip from sd card > choose zip from sd card > choose the zip file that you download & install it
5. reboot system now
6. Hit THANKS button if that works :highfive: :highfive:
By : JAWAD TWAM
Any preview or sth?
It works ............

Root POCO X2 MIUI 12 - 12.0.1.0(QGHINXM)and 12.0.5.0 EU ROM/MAKE COMMAND LINE

[ GUIDE ] HOW TO MAKE COMAND LINE
1. RIGHT CLIK - NEW TEXT DOCUMENT
2. RENAME NEW TEXT DOCUMENT IN ,,example" FLASHTWRP.BAT
3. DON'T FORGET TO ACTIVATE EXTENSION VIEW TO CHANGE FROM TXT TO BAT
4. RIGHT CLICK ON THE FILE ADN CLICK EDIT
5. RENAME RECOVERY ( RECOVERY.IMG)
5. ENTER THE COMMAND LINE ( FASTBOOT FLASH RECOVERY RECOVERY.IMG)
6. EXIT AND SAVE
7. I UPLOAD OTHER EXAMPLES
8. DON'T FORGET TO PUT ALL THE FILES IN THE SAME FOLDER
[ GUIDE ] Root POCO X2/ REDMI K30 WITH MIUI 12 - 12.0.1.0(QGHINXM) /12.0.5.0 EU ROM (WORKS)
1. FLASH TWRP 3.4.2B-0624
2. GO TO ADVANCED
3. INSTAL ROOT
4. WAIT TO FINISH
5. REBOOT PHONE AND WHAIT
6. AFTER A FEW SECONDS THE PHONE WILL REBOOT IN TWRP /OR BOOTLOOP.
7. ENTER IN RECOVERY MODE AND SELECT WIPE MARKED WITH RED LINES
8. REBOOT PHONE AND CONFIG YOUR PHONE
9. COPY Magisk-v21.0.zip TWRP FOLDER OR DOWNLOAD
10. REBOOT PHONE IN TWRP RECOVERY
11. INSTAL Magisk-v21.0.zip
12. REBOOT PHONE
13. INSTALL MagiskManager-v8.0.1.apk
14. THAT'S ALL
Video will come in a few days
MOD EDIT: Telegram link removed, please read the STICKY!

How To Guide [Guide] How to make Miui Mix fully read/write and decrypted

How to make Miui Mix fully read/write and decrypted using only your phone with UKA kitchen:
DISCLAIMER NOTICE:
* I'm not responsible for bricked devices, dead SD cards.
* YOU are choosing to make these modifications.
This guide should work with any a11 rom built under brotli compression inside rom.zip (system.new.dat.br, vendor.new.dat.br..), and it won't work with roms under payload.bin compression.
1- You need at least +30gb of space in internal memory.
2- Install UKA_5.6_eng_magisk.zip magisk module.
Dowload from here:
Unpacker Kitchen for Android(UKA)
version: 4.9.4 Last update of the program in the header: 04/06/2020 Developer: kory-vadim For the program to function, root privileges are required. Install: flash as Magisk module Short description: Unpacking, assembling and converting...
forum.xda-developers.com
3- Reboot and Install termux and type:
su <enter>
menu <enter>
4- Using mt manager app or X-plore app (i use both) copy MiuiMix.zip into internal memory (which will be modded).
5- Extract system.new.dat.br, system.patch.dat & system.transfer.list from MiuiMix.zip to /data/local/SystemUnpacker/
6- In termux type 6 then 1, then type cd /data/local/UnpackerSystem, then 1 to unpack *.br.
7- With mt manager app check /data/local/SystemUnpacker/ if the extraction has been done sucessefully, and delete: system.new.dat.br, system.patch.dat, system.transfer.list and system.img.
8- In termux type 9 then 1 then 0 then 1 .. and while the compression process, choose 5 as compression level (levels from 0 to 7) to repack system again into br format (with r/w permissions).
9- Copy/overwrite the new: system.new.dat.br, system.patch.dat & system.transfer.list into MiuiMix.zip ( update files inside zip).
10- In termux type type 12 then 1 to clean folder.
11- Do same steps (from step 5 to 10) for :
product.new.dat.br, product.patch.dat & product.transfer.list.
12- Do same steps (from step 5 to 10) for :
system_ext.new.dat.br, system_ext.patch.dat & system_ext.transfer.list.
13- Now we will decrypt vendor:
Extract vendor.new.dat.br, vendor.patch.dat, vendor.transfer.list & dynamic_partitions_op_list from MiuiMix.zip to /data/local/SystemUnpacker/
14- Open /data/local/UnpackerSystem/vendor/etc/fstab.default wth text editor (i prefer using mt manager), search for "fileencryption" and replace it wth "encryptable" and save.
15- Do same with /data/local/UnpackerSystem/vendor/etc/fstab.emmc.
16- Delete: vendor.new.dat.br, vendor.patch.dat, vendor.transfer.list and vendor.img.
17- In termux type 9 then 3, then type cd /data/local/UnpackerSystem, then 1, and while the compression choose 4 for android11 compatibility and choose 5 for compression level.
18- with mt manager open/data/local/UnpackerSystem/config/vendor/vendor_size_out.txt and copy the new vendor partition size ("1859366912" for example).
19- With mt manager open /data/local/UnpackerSystem/dynamic_partitions_op_list as text and replace values:
Grow partition vendor_a from 0 to 1715535872
resize vendor_a 1715535872
Replace two values "1715535872" with "1859366912" and save.
20- Copy/overwrite the new: vendor.new.dat.br, vendor.patch.dat, vendor.transfer.list & dynamic_partitions_op_list into MiuiMix.zip (update files inside zip).
21- Save the new MiuiMix.zip in Sd card.
22- Boot into ofox recovery , wipe metadata, data & cache , install the new MiuiMix.zip, reinstall ofox, reboot to ofox recovery, format data, reboot to system and pray
Thanks to @kory-vadim for UKA kitchen and @RajivShastri king for the translation of this cool tool from russian to english language.
Thanks to MiuiMix team.

How to fix MIUI 9 lag on Grand Prime (Removing GApps from MIUI 9 MULTIPRO rom)

Don't blame me if you get a bootloop. I own nothing here and I won't pretend I do. If you need gapps then get out of here
ROM by RioFebrian: https://forum.xda-developers.com/t/...for-grand-prime-g530h-f-m-t-w-y-p-bt.3721171/
1: Download ROM and Path files.
2: Extract the ROM zip file to a folder
3: Go to extracted rom folder and go to /system
4: Go to /app and delete these folders: GoogleContactsSyncAdapter, GoogleCalendarSyncAdapter
5: Go back to /system
6: Go to /priv-app and delete these folders: PrebuiltGmsCore, Phonesky, GoogleServicesFramework, GooglePartnerSetup, GoogleLoginService, GoogleBackupTransport
7: Go to the folder where you extracted the rom and select all the files from the rom (META-INF, system, boot.img, file_contexts)
8: Compress the files to a .zip file (for example miui9.zip)
9: Flash miui9.zip, then flash the path file
10: Enjoy!
If you get zip file is corrupted error then you did step 7 and 8 wrong.

Categories

Resources