[KERNEL][NEO][upd. 12/nov] Inteks Kernel Clean OC V15 4.0.2.A.0.42 - Sony Ericsson Xperia Neo, Pro

Version V15:
-voltages bugfix
-leave the default govenors in
Version V12: -->> Clean as Possible no foreign code (except acpuclock-7x30.c for overclocking)
based on 4.0.2.A.0.42 source/ramdisk
Included Features:
*OC/UV
*Swap
*usb-storage
*Recovery (modCWM from Doomlord)
*Init.d
*sd_ext
*ext3,ext4,ntfs
old -->>
Version V2: -->> Based On DoomLords Sources/Ramdisk
update v10:
+swap2cache included
+recovery included (thx to DoomLord)
for a clean kernel without battery drain use this version -> http://forum.xda-developers.com/showpost.php?p=19073256&postcount=72
update v7:
+swap, a script that activate swap on unused /cache partition is included
(copy it to phone and add it to the end off hw_config.sh)
+usb-storage
update v6: (needs firmware 4.0.2.A.0.42 !!!)
-like v5 but based on 4.0.2.A.0.42 source and 4.0.2.A.0.42 ramdisk
-clean as possible !!
OC up to 1.8MHz(inkl vdd_levels) + SmartAssV2 + CIFS + ThumbEE
happy Halloween
update v5: (needs firmware 4.0.2.A.0.42 !!!) i.e. -> http://forum.xda-developers.com/showthread.php?p=18840105
-stock sources from 4.0.2.A.0.9
-stock ramdisk from 4.0.2.A.0.42
-OC up to 1.8Ghz
-vdd_levels
-smartassv2
-CIFS & ThumbEE
**root -> http://forum.xda-developers.com/showthread.php?t=1320350
**recovery -> http://forum.xda-developers.com/showthread.php?t=1183465
update v4:
-like v3 but with ThumbEE enabled
update v3:
-based on stock se sources 4.0.1.A.0.283
-added overclock 1.8Ghz max
-added vdd interface
-added smartassv2
-added bfq scheduler
-enabled CIFS support
-use DoomLord's ramdisk for autoroot and recovery
for voltages and overclock i recomend this tool -->> http://forum.xda-developers.com/showthread.php?t=1269698
update v2:
i still have probs with forced closes on boot so i set the voltages to "SEMC Default" (1200mV on 1024Mhz) to make shure that to low voltage dont cause problems !!! it seems that it cured my problems at boot. i you like to undervolt use a prog like SetXperia for this.
here the values from orginal 4.0.1.A.0.283 sources-->>
Code:
{ 1, 806400, PLL_2, 3, 0, UINT_MAX, 1100, VDD_RAW(1100), &pll2_tbl[0]},
{ 1, 1024000, PLL_2, 3, 0, UINT_MAX, 1200, VDD_RAW(1200), &pll2_tbl[1]},
{ 1, 1200000, PLL_2, 3, 0, UINT_MAX, 1200, VDD_RAW(1200), &pll2_tbl[2]},
{ 1, 1401600, PLL_2, 3, 0, UINT_MAX, 1250, VDD_RAW(1250), &pll2_tbl[3]},
BTW i use [email protected] for v2 now!!!
because of my probs with voltage at boottime and because doomlord doesnt plan further development i tryed to compile doomlords sources
BTW really big thx to DoomLord for your Hard Work !!!
at this point i like to share my first selfcompiled Kernel for NEO stockrom 2.3.4 based on DoomLord's sources.
i made a few tweaks:
-removed swap support (because swaping to /cache partion does not work so its useless)
-removed unused govenors (i leave smartassv2 because i thing it is the best ;-) )
-set smartassv2 as default govenor
-set noop as default scheduler
-raised the voltage for 1024mhz from 1000mv to 1100mv (for stable booting)
if you try is Kernel you do at your own risk. but everything should work if you follow DoomLords guide in this thread-->>
http://forum.xda-developers.com/showthread.php?t=1197263
have fun
inteks
all credits/thx goes to doomlord and others mentioned in his post

---

Nice, can you tell me a good "battery save" profile?
Can i change the Voltages? And which Voltages should i take ? from DooM's Table?
Which Governor should i take?
Min and Max Cpupower? (Mhz)
and whats "thershold?" :S For batterysave 99 or lower?
Thanks!
EDIT: Cant load the file with "Qr Scanner"
EDIT2: zip datei works
Nice kernel Pic

---

renes2 said:
Nice, can you tell me a good "battery save" profile?
Can i change the Voltages? And which Voltages should i take ? from DooM's Table?
Which Governor should i take?
Min and Max Cpupower? (Mhz)
and whats "thershold?" :S For batterysave 99 or lower?
Thanks!
EDIT: Cant load the file with "Qr Scanner"
EDIT2: zip datei works
Nice kernel Pic
Click to expand...
Click to collapse
max is 1.8 ghz because 2ghz is unstable . i think its for arc-s witch comes with 1.4ghz default. so i removed it,else neo would boot with 2ghz on 1.47 volt and this is useless imho
you can set voltages with SetXperia i use smartass2 for powersave on 800mhz with threshold set to 99%
for 24/7 use i set samartass2 max 1.4ghz with a threshold of 85%
[edit]uploaded a preview of the used kernel pic

---

I love this, nice work, and thanls for Support C:
Smartass2 for Powersave? ok.
And which Profile for Normal?
Edit: I should read -_- sry and thanks C:

---

Plz tell me someone how much battery it drains during standby of around 6~9 hours (when one is sleeping and fone is in normal mode w/ screen off)
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button

---

I can tell you with the settings above, i got at battery save mode 4mA drain (SetXperia1.20)

---

renes2 said:
I can tell you with the settings above, i got at battery save mode 4mA drain (SetXperia1.20)
Click to expand...
Click to collapse
mA ???
Can you tell how much % u lose while not using fone
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button

---

How to unpack&repack bootimg/kernel/ramdisk ?
thanks!

---

At Night (8 Hours) 16% drain
EDIT; put the "boot.img" in your "fastboot" ordner, then hold SHIFT, and press the right button of your mouse, select windows cmd (sry i dont know this in english xD)
write "fastboot flash boot boot.img" without "
I think you know "Fastboot Mode" ?

---

Stock kernel, overnight (8h) take about 2% battery.
Doom v9 kernel, take about 12% battery (no overclocking)

---

Any advice to make it drain battery like in stock or less? Would that be possible?

---

MaxMedia said:
Stock kernel, overnight (8h) take about 2% battery.
Doom v9 kernel, take about 12% battery (no overclocking)
Click to expand...
Click to collapse
Thats the only reason I'm not shifting to any custom rom/kernel besides the fact they are faster and snappier
SE kernel co.sumes less battery even while using any app while custom kernels like doom lord's use twice the power to do same work
Sent from my Xperiã ÑeØ using XDA app
Donate to my paypal acc. if I helped you & if u can't, atleast hit the thanx button

---

i try to compile the SE sources this overclocking CIFS SmartassV2 and Doomlord ramdisk for Root & Recovery ...
but you know that doomlord doesnt write his own kernel its also based on SE sources !!! he add (maybe to)many features but its still based on Orginal Kernel code

---

update v3:
-based on stock se sources 4.0.1.A.0.283
-added overclock 1.8Ghz max
-added vdd interface
-added smartassv2
-added bfq scheduler
-enabled CIFS support
-use DoomLord's ramdisk for autoroot and recovery
have fun
inteks

---

MaxMedia said:
Stock kernel, overnight (8h) take about 2% battery.
Doom v9 kernel, take about 12% battery (no overclocking)
Click to expand...
Click to collapse
the same by me.
original SE kernel has over night 2-4 % battery loss.
Doomlord kernel 15-18%
i dont know why, no overclocking used 122 - 1024 Mhz , same rom and apps are installed.

---

PeterPan6754 said:
the same by me.
original SE kernel has over night 2-4 % battery loss.
Doomlord kernel 15-18%
i dont know why, no overclocking used 122 - 1024 Mhz , same rom and apps are installed.
Click to expand...
Click to collapse
has you tryed v3 ?
Sent from my MT15i using Tapatalk

---

inteks said:
has you tryed v3 ?
Click to expand...
Click to collapse
i will test v3

---

What have you done >.< Last Night i lost 70% Battery life <.<
I only updated the Kernel :-.

---

renes2 said:
What have you done >.< Last Night i lost 70% Battery life <.<
I only updated the Kernel :-.
Click to expand...
Click to collapse
with V3 ? i dont know what DoomLord has implemented in his kernel, if you look in the Arc forum you'll see that Batterydrain is a known problem with his akt Release.
try V3 its Stock with "minimal" changes.

---

No, with v2 ^^