I'm running CM7... it appears everytime I flash something, my APN gets deleted...
Any suggestions??
I've had that issue with Froyo, but not with CM7 or MIUI. Whenever I updated my ROM I'd have to re-enter my APNs.
It's possible to restore your APNs from a Titanium backup, but I've since forgotten which of the oddly worded system apps contains the APN data.
MizSxxyBych said:
I'm running CM7... it appears everytime I flash something, my APN gets deleted...
Any suggestions??
Click to expand...
Click to collapse
Everytime I flash something with this phone my APNs get deleted. There is an app in the market called **wait for it** APN Backup/Restore. Works for me everytime. Saved a .txt file to your SDcard and then when you restore it pulls the info off there.
Ha!
Funny guy! LoL....does anyone know the default Tmobile APN?
How about these
Name: T-Mobile Data (or T-Mobile US)
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: None
Note: For the Username, enter "None" with the keypad. Do not leave it not set.
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: default,supl,admin,dun,mms
Thanks!
Woodrube said:
How about these
Name: T-Mobile Data (or T-Mobile US)
APN: epc.tmobile.com
Proxy: <Not set>
Port: <Not set>
Username: None
Note: For the Username, enter "None" with the keypad. Do not leave it not set.
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: default,supl,admin,dun,mms
Click to expand...
Click to collapse
Thanks man! I hit reset to default APN and rebooted a few times and it finally popped back up... I have flashed Roms and stuff many times and never had this happen... IDK whats going on.... Hope it isnt going to delete on every reboot!
Actually, I toggled between 2G/3G a few times... I think that is when I lost it. Is this a bug in CM7 nightlies??
Not sure about it being a bug on this phone but I have seen it happen on CM6/7 on others. Use that app I put up there. It is one of those apps that I DL and then just sort of forget about until I need it. Low footprint too.
Related
Hello,
Used the search function, checked google, etc, has anyone been able to get MMS working on the X10 (2.1 | 2.3.3) at all on the fido network? I've tried all the variations with settings but I cannot seem to get it working whatsoever...
When someone sends one to me, i just get cannot download message, and when I am sending a picture, it just sits at sending.
try this:
Name: Fido Internet/MMS
APN: fido-core-appl1.apn
Username: <not set>
Password: <not set>
Authentication type: <not set>
Proxy: <not set>
Port: <not set>
MMSC: http://mms.fido.ca
MMS proxy : 205.151.11.13
MMS port : 80
APN type: default,mms
Cannot find the thank you button, although thank you! that worked like a charm!!
no problemo! glad i helped
i flashed the virtuous rom its working fine, i had to enter some APN info (rogers 4g gsm evo 3d) not sure if it was the right one, but the data is working, the sms timing is off by a few hours, and i can not send or receive mms. Any help would be great, thanks!
well i restored to original after this problem annoying me too much and everything is working fine now
fix
i had the same problem with the custom roms.
to fix the time stamp issue you either have to go back to the stock rom or download a time stamp fixer from the market.
as for not being able to send or receive mms check out the forum http://forum.xda-developers.com/showthread.php?t=1208485
heres my settings
Name: Rogers Internet
APN: rogers-core-appl1.apn
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.gprs.rogers.com
MMS proxy: 10.128.1.69
MMS port: 80
MMS protocol: WAP 2.0
MCC: 302
MNC: 720
Authentication type: <Not set>
APN Type: default,mms,hipri
Name: Internet Tethering
APN: isp.apn
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: <Not set>
MMS proxy: <Not set>
MMS port: <Not set>
MMS protocol: WAP 2.0
MCC: 302
MNC: 720
Authentication type: <Not set>
APN Type: dun
thanks, but what's the RUU roms for? will those let me send and receive mms if i flash one of those? cause even in stock i can't receive and send mms
skaffer said:
thanks, but what's the RUU roms for? will those let me send and receive mms if i flash one of those? cause even in stock i can't receive and send mms
Click to expand...
Click to collapse
the ruu roms are stock roms for the evo 3d. if you use a RUU that isn't rogers then you would probably have to enter apn settings again if it even works.
there is a Rogers RUU in the EVO 3D GSM Development forums.
but if you are using the virtuous rom then just download the sms time stamp fixer from the market and set it up
then input the settings in my previous post for your apn settings. if they dont work then you have other problems.
I was using the XXKH3-Deodexed-Zipaligned-Rooted-CWM-Busybox ROM and I have updated my GTi9100 with ICS 4.0.3 I9100XXLPB rom.
After updating the ROm, the 3G data package services are not working.
If I am trying to download an MMS, it says download failed. The carrier is ETISALAT UAE.
Anyone who can help me sownload the correct ICS ROM file??
But not from multiupload, i think the site is not working in UAE.
Regards,
You don't need any ROM files. What you need is your carrier's APN settings.
Google for the proper settings for your carrier and then go to Settings/Wireless and Network/Mobile networks/Access Point Names and press menu button. Add a new APN and enter the data there. Do the same for your MMS.
Edit:
I had some time so I found the settings for you.
First APN for 3g as follows:
Name: 3G
APN: etisalat.ae
Proxy <Not Set> .. leave it as it is.
Port <Not Set> ... leave it as it is.
Username: <Not Set> .. leave it as it is.
Password: <Not Set> .. leave it as it is.
Server <Not Set> leave it as it is.
MMSC: <Not Set> .. leave it as it is.
MMS: <Not Set> .. leave it as it is.
MMS port: <Not Set> .. leave it as it is.
MCC: 424
MNC: 02
Autherntication type: <Not set> leave it as it is.
APN type:<Not set> leave it as it is.
Second APN for mms as follows:
Name: etisalat
APN: mms
Proxy <Not Set> .. leave it as it is.
Port <Not Set> ... leave it as it is.
Username: mms
Password: mms
Server <Not Set> leave it as it is.
MMSC: http://mms/servlets/mms
MMS proxy: 10.12.0.30
MMS port: 8080
MCC: 424
MNC: 02
Autherntication type: <Not set> leave it as it is.
APN type: mms
Hi, I am trying to fix mms on my sisters device. She is with Cricket. I installed a nice rom but the only problem is getting APN settings to stick.
Wondering if I am entering them wrong? APN Shortcut is FCing jfyi.. I opened APNs via Voice Dialer and entered the APN manually like this:
Name: Cricket
APN: wap.mycricket.com
Proxy: wap.mycricket.com
Port: 8080
Username: [email protected]
Password: cricket
Server: <not set>
MMSC: http://mms.mycricket.com/servlets/mms
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 016
Authentication Type:CHAP
APN type;*
APN protocol;ip4/ip6
Fixed-
I deleted all the other APNS
I only have 2
1. Rogers
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
#2 Rogers WAP
apn=internet.com
no username or password
but you can try wapuser 1 and wap for password
There were 4 to 6 APNS now I have 2
tested and I can now send and receive photos/mms with stock MMS app.
Omega AOKP 4.2.2 Milestone 1
Dorimanx 9.19 kernel
modem-XXLPX
carrier - Rogers
Everything is working great on my phone except mms.
I have the proper APn settings.
My phone was reset with the carrier.
When I send a mms with a photo it just says sending.
If someone sends me a mms with photo I do not get it.
So is this a problem with the MMS app?
Any info would be great.:good:
thanks
Is it fixed now?Then add [SOLVED] ro the thread name