EDIT: After doing a thourgh examination of the pkg it may contain a serious bug that could potentially cause a super-brick. Until I can confirm that it's safe to use DO NOT install it.
As with all updates not on the official server they're not released because they're not fully tested. This is NOT the first time a pkg was released that had serious bugs, do not install.
Do you know what frequencies are used in that model? I know that Dell sells an unlocked models for AT&T and T-Mobile. Does the Olleh model match one of those or are the frequencies different? Does it matter?
I should get my Venue (AT&T version) on Monday. It will be interesting to see what ROM is on it.
It shouldnt matter, nor do I know what submodel is sold in korea anyway
Can I use it on my device?
My build no was 13040.
If this is not build version then how to find my build version.
Indian version, network independent I mean i can use any sim.
Sent from my Dell Venue using XDA App
Awesome! Thanks The Manii!
---------- Post added at 05:14 PM ---------- Previous post was at 05:13 PM ----------
marvin02 said:
Do you know what frequencies are used in that model? I know that Dell sells an unlocked models for AT&T and T-Mobile. Does the Olleh model match one of those or are the frequencies different? Does it matter?
I should get my Venue (AT&T version) on Monday. It will be interesting to see what ROM is on it.
Click to expand...
Click to collapse
If you bought unlocked AT&T version then probably 325, if locked AT&T then 321.
---------- Post added at 05:21 PM ---------- Previous post was at 05:14 PM ----------
rapol.goutham said:
Can I use it on my device?
My build no was 13040.
If this is not build version then how to find my build version.
Indian version, network independent I mean i can use any sim.
Sent from my Dell Venue using XDA App
Click to expand...
Click to collapse
After you flash the right recovery it will work with your SIM - but you will have to switch from Korean to English, and most likely there are no other languages besides those two (I installed Olleh GB ROM on my Dell Streak yesterday and can attest to that). But certain things may not work like USSD codes (if you need to check your data, minute balance with your provider via SMS type service) and so on. I would suggest waiting to see if Dell would have an unlocked retail version out that will support all languages and will not be carrier specific.
Hi guys, need your help. I have a Dell Venue Olleh 2.2.2 Android. I turn wi-fi status bar freezes, hangs up the phone, too. restarts itself. Lost network. Turn off the wi-wi, reboot the phone and everything is normal. Reset all did. It did not help. I apologize for my bad English, I write a transleyt.
When the wi-fi It is on, sometimes (if you pull down the status bar often) Flies system error and he reloaded. If the status bar does not touch, you can enter the market to upload something. Still slower than usual by 50%
Getting anxious in anticipation of the GB ROM. Hope Dell can release it soon.
Related
Hey folks, sorry to open a thread about this question but one of my friend unlocked his p765 (indian version) flashed recovery and then cm10.2 but he is facing problem with network. Most of the times he is not able to call neither he is able to recieve call. The network loss is not permanent but it goes and comes very frequently. Does he need to flash any baseband or as such? Searching the entire forum can be very painful so thought I shud better ask in the general section. Any help appreciated.
Edit: Please ignore, luckily he lost his phone.
i have the same exact problem i had unlocked my p769 with the euro v20b but my phone is usa
---------- Post added at 08:07 PM ---------- Previous post was at 07:35 PM ----------
if your using us p769 with t-mobile on custom rom use carloswii5's radio.zip file to flash right baseband
Me too, but only when i update to 4.1, in ICS is fine
Has anyone successfully implemented a qcn for the sgh-i527m to work with AWS networks for wind mobile? If so, can you please post the proper method? I'd like to switch from Fido, to Wind with my unlocked SGH-i527m. I understand wind uses aws, 1700mhz band.
Thank you.
Bump
No one?
Sent from my GT-I9205 using Tapatalk
BUMP on an old thread because I'm currently looking for this info
Nothing still.....
no one has even a yes or no answer for this question??
I went to samobile ( the website to download all Samsung firmwares for almost if not all Samsung phone models from every carrier in Canada. ) and downloaded the firmware for 4.1.1 android version carrier " unknown " (how it's listed in the firmware list) downloaded it and used the software "Odin" to flash the firmware onto my phone. (Make sure you make a backup copy of your phone in case something goes wrong and you brick your phone. Flashing is not easy if you don't know what your doing. So read read read about it on XDA Developers before you begin. Good luck
---------- Post added at 01:52 AM ---------- Previous post was at 01:50 AM ----------
Sorry forgot to mention that I have not switched the mega sgh- i527m over to wind mobile. I am currently working on the galaxy s3 and the Samsung note 2. I will post further info tonight if the mega did successfully accept the firmware for wind or not
Hey,
I bought the 06 model in Canada. I've moved home to Europe.
Now all apps are priced in dollars, not Euro. I also just found out that various apps don't even appear in the store but they do on everyone else's phone. Some apps also say region not supported so they won't even allow me to download.
I flashed an 03 generic FTF. Everything worked except 4G. I didn't even get 3G. I used exactly the settings the network advises. No luck. So I flashed the custom firmware ftf of the new European network, same problem. Next I flashed the original Canadian network custom firmware and 4G works perfectly, no settings needed, the network installs the right settings immediately. I checked them, they're the same I inserted before.
How to solve this? Ideally I'd like to use generic European firmware, have 4G and see local apps.
P.s. My phone is network unlocked, and I noticed a tremendous speed difference with 4G back, it's not just a symbol issue.
Thanks
Hay first u need to first fft file that come along with ur mobile
---------- Post added at 08:34 AM ---------- Previous post was at 08:31 AM ----------
Hay first u need to flash the first firmware that come along with ur mobile.it has all the problem fixed for u mobile
Hello, I recently bought a used T-Mobile LG v10 from ebay.
The person said "clean imei but may go bad so purchase assuming that the imei will go bad"
The phone has a different imei in the software compared to the sticker under the battery.
Now this phone is locked and I would like to unlock it. I do all my unlocking at unlockbase.com
Now to unlock this phone, you need to run the T-Mobile "Device Unlock" app
But when I run the app, this is the response...
Connecting to server, please wait...
Server not responding, Please try again later.
Because of this I am unable to unlock the phone.
Is there anyway to work around this or get the app to work.
I also noticed the WIFI cuts off automatically sometimes.
Alex
Hi
---------- Post added at 09:41 PM ---------- Previous post was at 09:41 PM ----------
T mobile unlocked version I'm using in India with vodafone sim, I'm on kitkat android version. now I am getting OTA from t mobile ( seems 6.0 as its big update) but I'm afraid that I'll loose unlock after update. what i do I want marshmallow????
T mobile unlocked version I'm using in India with vodafone sim, I'm on kitkat android version. now I am getting OTA from t mobile ( seems 6.0 as its big update) but I'm afraid that I'll loose unlock after update. what i do I want marshmallow????
You don't loose the unlock, once the phone is unlocked it stays unlocked. I bought my v10 on ebay and am using it in Honduras, updated it once before rooting, never lost the unlock
Sent from my LG-H901 using Tapatalk
So I'm using the Huawei P20 Lite with build number ANE-LX1 8.0.0.147(C185) single sim on MTN South Africa.
Here is so many threads on how to change to Dual sim, but it's so confusing with all the different Countries and Different firmware. Being a Noob, but knowing how to flash and do basics, I would like to know in plain Noob language, which firmware I can use to make my phone a dual sim. I have read so many threads on different ways to do things with different firmware, and it is really confusing.
So the main Question here is, which Firmware can I use in South Africa for Dual Sim?
TIA
I also have a MTN Phone and I managed to flash bot the C185 version which is for Africa and the Euro one which is C432.
However for the life of me the second sim doesn't work, have tried numerous times now. I am also unable to flash it back to a single sim version too, which is annoying as each time I make a call a pop-up comes up saying I am using sim 1. which would be fine if Sim 2 actually worked. I also lost 5ghz wifi for some reason, so only 2,4 working now. So for now I would say stick it out with the single sim version or buy a dual sim from takealot.
you looking for this post.
You need to unlock bootloader with DC-unlocker , Huawei doesnt give the codes any longer.
https://forum.xda-developers.com/showpost.php?p=77583827&postcount=19
ulidor said:
I also have a MTN Phone and I managed to flash bot the C185 version which is for Africa and the Euro one which is C432.
However for the life of me the second sim doesn't work, have tried numerous times now. I am also unable to flash it back to a single sim version too, which is annoying as each time I make a call a pop-up comes up saying I am using sim 1. which would be fine if Sim 2 actually worked. I also lost 5ghz wifi for some reason, so only 2,4 working now. So for now I would say stick it out with the single sim version or buy a dual sim from takealot.
you looking for this post.
You need to unlock bootloader with DC-unlocker , Huawei doesnt give the codes any longer.
https://forum.xda-developers.com/showpost.php?p=77583827&postcount=19
Click to expand...
Click to collapse
Thanx. Just a quick question... You mention DC-unlocker but it doesn't support the P20 Lite, any suggestions?
yes it works with p20 lite.
just follow the steps via the program to find your phone.
you have to however pay to get the bootloader unlock code. I cant remember how much but its a couple of Buffalo's.
Check this thread
https://forum.xda-developers.com/huawei-p20-lite/how-to/unlock-methods-to-unlobootloader-t3794725
---------- Post added at 02:47 PM ---------- Previous post was at 02:24 PM ----------
Also backup your OEM information first before you flash anything.
you will need this at a later stage.
Also when you have that info please could you send me a copy as I lost mine and need that information