[HOW_TO/UTIL]ChevronWP7 Unlocker & Cert download - Works On Windows ® Phone 7 Tsunagi
This method unlock, runs on your machine toshiba tsunagi.
It is very important, because the tool that unlocks the device.
Now we can install applications, etc.
More Info:
ChevronWP7 Unlocker & Cert download - *here* + video tutorial
How?
1. Connect Windows phone 7 (TG01 for me)
2. ON THE DEVICE go to cr-developers.co.cc/cwp7.cer and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3/Vists/Windows 7
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
Click to expand...
Click to collapse
Have Fun!!!
Nokser
Nice work, but i have signal and can recive sms. Will this improve signal streinght or it can't be helped?
Nokser said:
This method unlock, runs on your machine toshiba tsunagi.
It is very important, because the tool that unlocks the device.
Now we can install applications, etc.
More Info:
ChevronWP7 Unlocker & Cert download - *here* + video tutorial
How?
Have Fun!!!
Nokser
Click to expand...
Click to collapse
thank you nokser! how has said you can´t describe prozesses step by step? thank you!
hi nikola im in the same boat my signal is terrible
True, but Jool said he have exelent call quality, I will see tomorow when i get to Novi Sad it is a big city here in Serbia, there i should have good signal streinght... Downloading Zune, and hoping for best.
---------- Post added at 08:24 PM ---------- Previous post was at 07:39 PM ----------
I get the eror, uh,oh connect USB and Start Zune, but botha re ok, why i get this?
has anyone had success with this ? i havnt tried it yet on my tg01 WP7
jonnyhall1bmx1 said:
has anyone had success with this ? i havnt tried it yet on my tg01 WP7
Click to expand...
Click to collapse
You install certificate in phone?
noo i havnt tried it yet i will try when i get home does the chevron hack work on our tg01 ?
jonnyhall1bmx1 said:
noo i havnt tried it yet i will try when i get home does the chevron hack work on our tg01 ?
Click to expand...
Click to collapse
Yes I test this in my TG01, and work...
if not in first time, then i reinstall cer. one more, reset and unlock in this program.
I installed certificate and i can't run ChevronWP7, I done everything It says but I get error to connect to USB and start Zune software
Nokser said:
Yes I test this in my TG01, and work...
if not in first time, then i reinstall cer. one more, reset and unlock in this program.
Click to expand...
Click to collapse
thank you nokser i will try when i get home
maybe it helps:
IMPORTANT: CHEVRON CERTIFICATE expired on 25. Novembre 2011
the chevron unlock certificate which you install on your device (step 2) expired on 25. Novembre 2011. The only solution to still be able to use the Chevron unlocker is to set on both your PC and your WP7 device to something before 25. Novembre 2011 and reboot both devices (!) before using the unlocker again.
HackMimic said:
1. download and install Windows Phone Developer tools or try only this regfile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PhoneRegAdd.zip unzip and start it on your computer. this writhe reg hey in your registry. reboot or logout/ login windows
2. Do u have Skype or any other app like that running on ur machine?
If so then u need to full close out of those apps. Make sure there process's are not still active. U can do so through task manager
Settings ZUNE
3. In Zune when ur phone connects does it say ur name or guest?
If guest then u need to hit the button below the phone image to set up ur phone to be the main user.
4. Did u sign into Zune? If no then sign in. I was signed in when it worked for me.
Click to expand...
Click to collapse
Talys said:
That worked for me...install first Windows Phone Developer tools to get the app loader from Microsoft, which is where I'm at now. r try only this regfile
PhoneRegAdd.zip unzip and start it on your computer. this writhe reg hey in your registry. reboot or logout/ login windows
ON THE tg01 go with internet browser to cr-developers.co.cc/cwp7.cer and install. the chevron cert.
2. make sure registry (in your Computer) is modified:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
I think the WP7 developer tools from MS does this, but you can add it in manually
(it's a 32bit DWORD)
3. plug in phone and leave zune running (read Settings ZUNE)
4. run chevronwp7.exe (as administrator) , click both checkboxes
5. click unlock
To stay Chevron unlocked, turn your device in Airplane Mode if you connect Zune (if not, Zune will re lock your Phone again)
Click to expand...
Click to collapse
i can now download stuff from market place does that mean i have unlocked my phone?
jonnyhall1bmx1 said:
i can now download stuff from market place does that mean i have unlocked my phone?
Click to expand...
Click to collapse
if was before not possible, then yes
with chervron unlocke wp7 device you can download also hombrew apps
for example form xda site. the apps are a .xap files. to install it you need a xap deploy prog.
To stay Chevron unlocked, turn your device in Airplane Mode. Run Zune, after sync. Deploy your app.
jonnyhall1bmx1 said:
i can now download stuff from market place does that mean i have unlocked my phone?
Click to expand...
Click to collapse
you did it by Miro guide or Nokser? PLs help me to unlock the phone, and yes if you can download from market and install custom xap's that mean you did it
here the whole (orginal) thread from Noksers post:
http://forum.xda-developers.com/showthread.php?t=852020
can some 1 tell me what this chevron thing actually does?
jonnyhall1bmx1 said:
can some 1 tell me what this chevron thing actually does?
Click to expand...
Click to collapse
Its a jailbreak- with the security cert- it allows you access to the system
such a key for a door in the sandbox (firewall) from WP7 System
ohhh haha i innstalled it anyway but im not that hightech for anything like that
jonnyhall1bmx1 said:
ohhh haha i innstalled it anyway but im not that hightech for anything like that
Click to expand...
Click to collapse
i´m also a "normal" user. I "use" other hightechS develop and hack ....
Related
Do you want a single file flashing tool?
Here it is!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update to version 2.1
- some bugs fixed
Update to version 2.2
-removed command line console
-added my own style console
-many optimizations
Update to version 2.3
-fixed ocazional bugs with exit button
-deny posibility to change settings when upgrade are running
Update to version 2.4.5
-Added warning and stop upgrade if hardSPL fail.
Update to version 2.5
-Added Tooltips and shorcut to Device Manager(to check correct prophet driver install during flash).
Update to version 2.6.5
-Added Menu on mouse right click to application dialog.
-Added minimize to try feature
-Added automatic check of prophet drivers installation feature.
-final version!
-no future update!
0. Copy the nk.nbf file in the same folder with this flashing tool
1. Select your phone type G3 or G4.
2. If you use windows Vista or Windows 7 check the Vista option.
3. If you have already HardSPL your phone please uncheck the HSPL option.
4. Press Start Button to start ROM Flashing.
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
If you have the 64-bit edition of Windows you must disable digital driver signing before you continue on! To do this, restart your computer. After the initial BIOS screen but before the Windows bootup splash screen, spam press F8 until you see a Windows menu. If you do not get a menu and end up in Windows you pressed F8 at the wrong time. Try it again until you get the menu. In the menu select Disable Driver Signature Enforcement or Disable Digital Driver Signing (depending on your version of Windows). Windows will finish booting up and you can continue on.
More info about drivers installation here...
You don't need any other file to flash the ROM!!!!!!!!!
Sounds good! Will test it and if it's working good, I'll add it to my own ROMs!
Thanks for this i will test this asap
Please some feedback.
Thanks!
Nice...
Good idea to make it simpler...
Thanks much bikertibi for your sharing
bikertibi said:
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
Click to expand...
Click to collapse
I'm using win7 and just installing Windows Mobile Device Center. Which driver should I replace ?
me_devilgrey said:
I'm using win7 and just installing Windows Mobile Device Center. Which driver should I replace ?
Click to expand...
Click to collapse
After the hardSPL is done windows search for new drivers on the net. If you have an internet connection a bed drivers are installed. You must replace this driver and I remember the name is "PocketPC USB". The driver is the same in case of three color booting
bikertibi said:
After the hardSPL is done windows search for new drivers on the net. If you have an internet connection a bed drivers are installed. You must replace this driver and I remember the name is "PocketPC USB". The driver is the same in case of three color booting
Click to expand...
Click to collapse
Cool.. i'm trying to flash dopod 818 but still not sure since i upgraded to win 7, now i guess i'll try WM6.5 Build 23003 WWE bikertibi edition too. Thx..
me_devilgrey said:
Cool.. i'm trying to flash dopod 818 but still not sure since i upgraded to win 7, now i guess i'll try WM6.5 Build 23003 WWE bikertibi edition too. Thx..
Click to expand...
Click to collapse
I tested win 7 for flashing and works great....
working fine with WM6.5 Build 23003 WWE bikertibi edition flashing with win 7. Great job!
bikertibi said:
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
Click to expand...
Click to collapse
What do you mean by "to replace"? Simply to overwrite the driver files on the disk with the files from archive? I have Vista with already installed and running Mobility center. I tried to update the driver by pointing to the new drivers - system says I heve the latest drivers... I tried to install new drivers by clicking the inf files - got the message that it can't be installed in sucha a way...
Looks it is nice tool, but my knowledge probably is not enought..
Thanks in advance.
ZRimaZ said:
What do you mean by "to replace"? Simply to overwrite the driver files on the disk with the files from archive? I have Vista with already installed and running Mobility center. I tried to update the driver by pointing to the new drivers - system says I heve the latest drivers... I tried to install new drivers by clicking the inf files - got the message that it can't be installed in sucha a way...
Looks it is nice tool, but my knowledge probably is not enought..
Thanks in advance.
Click to expand...
Click to collapse
You have to make an upgrade to the already installed drivers by selecting the upgrade option in the hardware manager. After that you must select "manual pick" and "I have location" to point to the working driver. Remember that you need to replace only the driver active in the upgrading process (in the tree color state or after hard SPL)
Great job, thanks.
Gran trabajo, gracias.
Update first post
Update to version 2.1. Fixed some bugs..
Am having problems when flashing some times it works some times it wont the problem is after hardspl and the Device has white screen the update software comes up good but every time it trys to seach for the version of the os on my Devive it scans but then i get error cant continue phone not connected after hardspl active sync dont detect the phone anymore thats noumal right? its saying Not Connected after hardspl with white screen why wont it update? and yes i tryed both versions still the same problem please help thanks
lyndel4 said:
Am having problems when flashing some times it works some times it wont the problem is after hardspl and the Device has white screen the update software comes up good but every time it trys to seach for the version of the os on my Devive it scans but then i get error cant continue phone not connected after hardspl active sync dont detect the phone anymore thats noumal right? its saying Not Connected after hardspl with white screen why wont it update? and yes i tryed both versions still the same problem please help thanks
Click to expand...
Click to collapse
Is normal to disconnect activesync after hardspl because it change the phone state to update drivers. Sometime if you don't have finished the activesync connections steps, after hardspl, the updating program repport imposibility to connect. Don't worry. Exit updating program without close the "Update Prophet" program and make again all steps for upgrading (select g3 or g4 model always, if it is already selected too, select hspl option) and start a new upgrading, ignore copy warning with "cancel". Normaly the update process will start again and report corrected connection for upgrade.
Thanks al try that but after that error active sync wont find it and the update software aswell so i always have to reset my device first then flash but yes al keep on trying I suspect it must be a software thats interupting the upgrade maybe i should close down all my programs first before upgrade to prevent this problem the only program i got is IM Clients and Firefox browser plus Windows Defender al try it and let you know because those applications could be interupting the update process. Thanks again
bikertibi, does this work like Lazy Tool too?
clustered said:
bikertibi, does this work like Lazy Tool too?
Click to expand...
Click to collapse
For me i find its just like lazy tool only it has a GUI lazy tool is only command line DOS so use it I get no problems
I ran v2.1 on Windows7 x64 (b7100) with installed Vista64_DRIVER.
Signing drivers was turned off, test mode (for OS) was turned on.
But unsuccessfull: RUU still crash.
See details in this screenshot:
http://s1.sendpic.ru/111214.jpeg.html
BTW, is it significant that "sleep4.exe" is "not compatible" or not?
Because I think that there is something wrong with Vista64_DRIVER driver.
Any solutions?
Before we begin make sure you have Magldr 1.12 and your WP7 ROM installed.
Tools needed on PC before continuing:
1. Windows Development Tools - CLICK HERE
2. Zune PC App - CLICK HERE
Windows Development tools will take some time to download and install so be patient!
Now that you have all the tools ready to go on PC and your HD2 on WP7 its now time for the fun part!
1. Download Chevron - CLICK HERE
2. Put ChevronWP7.exe in root of your C:/ drive
3. Download chevronwp7.cer - CLICK HERE
4. Attach chevronwp7.cer to your email and send to yourself. - Open up the email on your HD2 (I used google mail) and click the attachment once will turn into shield, Click attachment again to goto install screen and click install.
5. Now on your PC plug phone into USB and run Zune. (run as administator) ChevronWP7 in C:/ drive. - tick both boxes and click unlock. Now exit.
Now you have your phone unlocked and ready to move onto the registry editing.
1. Download XBMOD Deployer - CLICK HERE
2. In your Windows Development tools you installed earlier there should be an application called "Application Deployment". Connect your phone and open the program and install XBMODDeployer.xap. This extracts the provxml into /My Documents/My Ringtones/.
3. Download TouchXplorer - CLICK HERE - and install this .xap the same way as step 2.
4. Using TouchXplorer copy the file in /My Documents/My Ringtones/ to /Windows/ , overwrite if asked. - Give it time to open the Windows folder it takes a while.
5. Download HTC Connection Setup - CLICK HERE - same as above deploy to phone.
6. Open HTC Connection Setup and setup your network.
7. If your camera setting are not showing, in settings region, change display language to: United States. - this shouldnt affect anything if you are in a different country. Im from UK
Now your phone is almost setup and ready to go. All you need to do now is contact microsoft for your activation code for your new HD7. Then just sign into live and enter activation code.
Marketplace and LIVE service should all function fine now.
I hope this Tutorial was wasy for you to follow. Any problems I'll be happy to help.
USEFUL LINKS:
Chevron Tutorial and Download
Manually edit registry
Tom XAP Installer
Apps for HD2
Frequently asked questions:
Cant Sync phone or cant get phone connected to any of the programs? Make sure you have everything installed correctly and make sure your Phone is AWAKE!!
Having problems installing any apps? - Use Toms little app HERE
Camera Settings not showing/working? - change display language to: United States.
Thanks a lot !!
nice tut , may I copy it ?
ceesheim said:
nice tut , may I copy it ?
Click to expand...
Click to collapse
Why not just link to it?
ceesheim said:
nice tut , may I copy it ?
Click to expand...
Click to collapse
Copying it to another thread on XDA is pointless but if you mean for your site/blog then sure go ahead! Just make sure you credit XDA.
bazgee said:
Copying it to another thread on XDA is pointless but if you mean for your site/blog then sure go ahead! Just make sure you credit XDA.
Click to expand...
Click to collapse
I had already started a howto but yours is way better
so what I like to do is ad yours (and the link to this thread ofcourse
Could the first of you belonging to the European Region confirm this works for people in Spain (or European HTC HD2) without carrier lock?
And... where should we therefore contact? (Please note I am extremely willing to call US just to get my Live Services activated on our lovely lovely HD2)
ceesheim said:
I had already started a howto but yours is way better
so what I like to do is ad yours (and the link to this thread ofcourse
Click to expand...
Click to collapse
Just link to this thread please as it took me a while and would appreciate the Thanks!
bazgee said:
Just link to this thread please as it took me a while and would appreciate the Thanks!
Click to expand...
Click to collapse
do you like it like this?
http://forum.xda-developers.com/showthread.php?p=10566003#post10566003
Thank you for the tutorial - One question though - I am in Asia - do i need to call MS as well or is there any other way for me to contact them to get the activation code?
badassballer said:
Thank you for the tutorial - One question though - I am in Asia - do i need to call MS as well or is there any other way for me to contact them to get the activation code?
Click to expand...
Click to collapse
you need to get yourself an activation code , so yes you need to call them or ask someone that has a code (you can use one code on 3 live accounts )
badassballer said:
Thank you for the tutorial - One question though - I am in Asia - do i need to call MS as well or is there any other way for me to contact them to get the activation code?
Click to expand...
Click to collapse
Im sure as of now the only way to contact them is via Phone.
I got WP7 running but when I get into camera settings the only thing that appears is the setting for flash. No other options like scenes. I can only record videos in 480p. Can someone confirm them having that issue, I may need to reflash the rom
mateuszd said:
I got WP7 running but when I get into camera settings the only thing that appears is the setting for flash. No other options like scenes. I can only record videos in 480p. Can someone confirm them having that issue, I may need to reflash the rom
Click to expand...
Click to collapse
Same for me! Im guessing there is no scenes!
bazgee said:
Same for me! Im guessing there is no scenes!
Click to expand...
Click to collapse
on a real wp7 phone you have :
Camera settings
Scenes
Efects
Resolution
metering mode
flicker adjustments
Restore
but I think that the hd2 wp7 rom has actually build number 6535 and not the 7004 you are reading in settings.
For some reason I cannot install Magldr 1.12 on my hd2 - it just sits at 0% and never moves.
It's currently using magldr 1.11 if that makes a difference. Apologies if I have overlooked something obvious but I've been going through tons of threads about wp7 so I may have missed something sorry.
Appreciate any suggestions how to fix this. Is there another process I must run prior to installing magldr 1.12 for instance?
*edit* Am also on HSPL 2.08
Contacting Microsoft
I have a question reguarding contacting microsoft. When you call them you are surely not telling them you need an activation code to unlock wp7 on your hd2 are you? What exactly are you saying to them.
I had problem with ChevronWP7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but i get this every time
also I checked the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]“DeviceReg”=dword:000069C5
and it's a same
please help me
I worked the camera issue out. Please read my other post:
http://forum.xda-developers.com/showpost.php?p=10581330&postcount=320
ahmadssb said:
I had problem with ChevronWP7
but i get this every time
also I checked the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]“DeviceReg”=dword:000069C5
and it's a same
please help me
Click to expand...
Click to collapse
Did you install the Windows Phone SDK? Do so if not. That solved my problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT ANNOUNCEMENT (11/25/2017): https://forum.xda-developers.com/showpost.php?p=74628972&postcount=1071
IMPORTANT ANNOUNCEMENT (08/02/2020): https://forum.xda-developers.com/showpost.php?p=83193721&postcount=1236
Source code: https://github.com/gus33000/InteropTools
OP update is still Work in progress
READ BEFORE POSTING ANYTHING
Interop Tools can't be installed, like with a lot of other apps that uses restricted CAPs, if you CAP unlocked your phone using vcREG, vcREG changes 2 registry values that breaks the whole deployment system since one build of the rs1 development, so please reset your phone, use only vcREG to install an older NDTK if needed, and install Interop Tools (h/t @vcfan see your DMs)
Interop Tools doesn't require and will never require any CAP unlock
Please read the installation instructions carefully
Interop Tools versions older than or equal to Beta 1.8.1 are not supported in any way, please update the app
I'm not responsible for any damage made by your device if this ever happens even though I'm really careful each time I'm posting a new version
When submitting a bug report, please specify what apps related to Interop/Cap unlock you have installed, if you did anything, some reproduction steps and the phone model you are using, along with if you cap unlocked your device.
INSTALLATION INSTRUCTIONS
If you have an IT version older or equal to Beta 1.7 already installed, please uninstall it and reboot your device prior to installing/updating Interop Tools
Download the latest Interop Tools appxbundle for your device architecture and its dependencies
Extract both zips, and extract the certificate file if you're installing Interop Tools on a desktop device
If you're on a Desktop device, double click the certificate file, select Local Machine as the installation location, press next, select place the certificate into the following certificate store, and pick trusted peoples, then press ok, and next.
Install Interop Tools dependencies like any regular appx, by opening up the Device portal for your device, going into the application section, click on browser for the app package, select the dependency appx, and then press install, do that for each dependency
The install Interop Tools main appxbundle by pressing browser, pick it, then press install.
ENABLE SYSTEM REGISTRY ACCESS INSTRUCTIONS
For x50+ lumia devices by Microsoft
Download and install vcREG and proceed to install the older NDTK version as instructed in the vcREG thread, for support about this whole process, please see the vcREG thread in the same forum section
Don't do any CAP unlock, otherwise Interop Tools might not install properly
Install Interop Tools if you never installed it like instructed on this post
For other lumia devices by Microsoft
Go to the Interop Unlock section of Interop Tools
If restore NDTK isn't on, turn it on, and reboot your device
For all other OEM devices
Download the NDTK packages and the WPAK utilities from here: http://forum.xda-developers.com/attachment.php?attachmentid=3860782&d=1472659473 http://forum.xda-developers.com/attachment.php?attachmentid=3860780&d=1472659433
Go to the Interop Unlock section of Interop Tools, and tap the button that says "Enable installing NDTK on any device"
Put the two NDTK cabs in one empty folder on your PC
Open a command prompt as administrator and make sure you're in the directory where the iutool executable is located from the WP(AK) zip
run "iutool -V -p "<fulllocationwherethetwondtkpackagesarestored>" with your phone connected into the PC
if iutool throws an error, please unplug your device, go to the control panel, devices and printer, select your phone, should be ghosted, click on uninstall device, and then replug the device and wait for it to reinstall. If you still have issues, run GETDULOGS from the same CMD prompt, and post the cab you get along with a message in this thread
When the installation is finished, open Interop Tools, go to the Interop Unlock section, and tap restore the original manufacturer info button.
You can find a Q&A in the post below the OP.
FEATURES
This app allows you to:
Edit the registry through the registry editor
Browse the registry hives through the registry browser
Find sepecific registry values/keys through the search page
Apply tweaks to your device
Interop and Cap unlock your device
Access device information
Remotely edit the registry through the built-in desktop app
Manage Applications
Manage Certificates
Perform standard registry operations such as deleting, renaming, and copying details
Built-In Command Prompt inside the app (coming in pre-1.9)
Manage SSH accounts and more (coming in pre-1.9)
and more.
This app includes a lot of neat features which makes a better experience while editing the registry such as for example, the key suggestion bar in the registry editor, or the jump to button in the browser.
STATE OF THE APP
The app is still in development and has some rough edges. I would appreciate if you could report bugs about it, but before make sure you read the Q&A.
Currently the app has limited support for the registry for all devices running at least Windows 10 Mobile build 10240 by default.
Some specific devices have extra support out of the box, please read the list inside the spoiler below.
Lumia handsets (including other handsets with the ndtk service installed):
SYSTEM level access for editing and reading the following registry values and hives:
HKLM
HKCU
HKCR
HKU
HKCC
REG_DWORD
REG_QWORD
REG_SZ
REG_MULTI_SZ
REG_EXPAND_SZ
REG_BINARY
SYSTEM level access for LG and Samsung devices (untested, please report some feedback about it):
HKLM
REG_DWORD
REG_SZ
You can however enable more access privileges by following the instructions above, about enabling system registry access.
LINKS
See the second post for current pre-releases
Main Mega folder for download links and older versions: http://bit.ly/InteropTools See the current pre-releases
App Twitter account (for direct communication if I'm not available directly): http://twitter.com/InteropTools
My Personal Twitter account: http://twitter.com/gus33000
SCREENSHOTS
Credits:
Snickler, for the SSH stuff
VCFan for the Lumia RPC library.
Myria-Chan for the Test signing hack.
Microsoft for the other libs and the one coming with v1.9
And a lot more peoples helping me testing the app, reporting tweaks (also thanks for some tweaks to the peoples contributing to the WPTweaker project, especially for the brightness slider).
Current Pre-release:
https://forum.xda-developers.com/showpost.php?p=73608163&postcount=1006
Q&A
Q: What does "versatile" means?
A: It means that the app will work on every phone. But that doesn't mean it will work the same everywhere.
Q: Will this app work on Windows Phone 8.1?
A: No this is a Windows 10 UWP app, please fall back to using vcREG and CustomPFD for Windows Phone 8.1.
Q: I'm getting an error while installing one of all dependencies, what should I do?
A: Install all the dependencies first then install the one that throws an error. One of them depends on another one.
Q: The app doesn't install
A: Make sure you're installing the correct package for your processor architecture (x86_x64 is usually for PC, your phone is probably an ARM device) and that you installed all dependencies one by one prior to installing the app.
Q: I have a lumia which is not part of the x50 device family but I can't seem to be able to write some registry values.
A: Make sure under interop unlock, "Restore NDTK" is on, if not turn it on, reboot and try again.
Q; The app crashes.
A: Please submit a bug report with full detailed reproduction steps as well as your device model, if you tampered with ndtk before and other details that may help troubleshoot the crash such as the current running build and etc.
Q: What does TNSTSIGNING do?
A: It enables Test Signing on builds prior or equal to 10572. Don't be stupid and don't turn that on on later builds, your phone will most probably go into a boot loop.
Q: Can't install the versions above Beta 1.7
A: Re-read the installation instructions.
Q: How to install android with this app?
A: No you can't.
Can install this on win phone 8.1 i would like enable dng photos ?
L_u_k_e said:
Can install this on win phone 8.1 i would like enable dng photos ?
Click to expand...
Click to collapse
No this is a Windows 10 UWP app only, sorry. You can fall back to using vcreg and custompfd on wp8.1, or upgrade to Windows 10 Mobile if you wish to use this app.
I've already install version 1.7.157.0. When I uninstall it and reinstall with version 1.8 nothing happens. I tried reboot my phone.
quyleanh said:
I've already install version 1.7.157.0. When I uninstall it and reinstall with version 1.8 nothing happens. I tried reboot my phone.
Click to expand...
Click to collapse
Did you install all dependencies provided with beta 1.8.1 one by one before installing the main appxbundle? Dependencies changed between 1.7 and 1.8 and you need to reinstall all of them.
gus33000 said:
Credits:
dll coming with v1.9
Click to expand...
Click to collapse
Waiting for it.
Question: can you implement .reg files import?
Nice to see you here, Gus.
gus33000 said:
Did you install all dependencies provided with beta 1.8.1 one by one before installing the main appxbundle? Dependencies changed between 1.7 and 1.8 and you need to reinstall all of them.
Click to expand...
Click to collapse
Except Microsoft.NET.Native.Framework.Debug.1.3, I installed all remained dependencies through default File Explorer.
Hope it will work with version 1.9 tommorow.
Finally a post about Interop tools from @gus33000 himself. btw the app is a hope.thanks for all ur hard work mate..
quyleanh said:
Except Microsoft.NET.Native.Framework.Debug.1.3, I installed all remained dependencies through default File Explorer.
Hope it will work with version 1.9 tommorow.
Click to expand...
Click to collapse
Without Microsoft.NET.Native.Framework.Debug.1.3 it will obviously not work. You need to install that, even for 1.9
Note: you need to install that debug dependency after all the other ones actually.
Reg files import? Can be made?
augustinionut said:
Reg files import? Can be made?
Click to expand...
Click to collapse
That's actually planned since a while.
Awesome..
Thanks for share
Please can upload the file in zip? I cant download
Wanna download the lastest version but only appears 1.8, just for test CMD on my Lumia device.
gus33000 said:
Without Microsoft.NET.Native.Framework.Debug.1.3 it will obviously not work. You need to install that, even for 1.9
Note: you need to install that debug dependency after all the other ones actually.
Click to expand...
Click to collapse
I did follow your note and it worked like charm! Thank you very much!
chinitopex said:
Awesome..
Thanks for share
Please can upload the file in zip? I cant download
Click to expand...
Click to collapse
Wait for 1.9-prerelease which I will release today, that's mainly why I didn't attach any file.
Mafworld said:
Wanna download the lastest version but only appears 1.8, just for test CMD on my Lumia device.
Click to expand...
Click to collapse
Wait for 1.9-prerelease
Hello thank you for this app, I was wondering if this app can work on other phone that Microsoft or Lumia. I have a Blu Win HD LTE runing win 10 (14393.67) ?
Thank you
ck32 said:
Hello thank you for this app, I was wondering if this app can work on other phone that Microsoft or Lumia. I have a Blu Win HD LTE runing win 10 (14393.67) ?
Thank you
Click to expand...
Click to collapse
It will work yes, but some registry values might not be accessible to you. The Interop page, ssh/sftp/cmd, some tweaks will not work for example.
I finally did it!
UPDATE: The App is now fully released with the abiltiy to install packages with their dependencies and progress bar notifications on PC and Mobile! This app can now fully replace the built in App Installer and Windows Device Portal for sideloading apps
Source Code: https://github.com/colinkiama/UWP-Package-Installer
NOTE: I don't know if it's a bug or not but on mobile, when I open an .appx or .appxbundle, it asks me what app I want to use to install the package but it doesn't list mine. Maybe it's because I'm on the insider builds so please message me if opening the files works for you on mobile.
For mobile there's a workaround for this shown below. On PCs, the app works exactly like the built in app installer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Install: Unzip the file, install the dependencies first then install the appxbundle.
Download it here: https://github.com/colinkiama/UWP-Package-Installer/releases
Oh wow running awesome in mobile... But some bugs showed up...
1. Sometimes install completes, but still showing installing 98-99% in app..
2. Scaling is not quite perfect.. Please fix scaling for portrait devices...
Suggestion:
Please try to show app name and it's icon, like the App installer of pc
maruf8 said:
Oh wow running awesome in mobile... But some bugs showed up...
1. Sometimes install completes, but still showing installing 98-99% in app..
2. Scaling is not quite perfect.. Please fix scaling for portrait devices...
Suggestion:
Please try to show app name and it's icon, like the App installer of pc
Click to expand...
Click to collapse
I can fix 1. and 2.
But I need help with the suggestion. I need a way to get the metadata out of the package. My app handles a StorageFile object so it's pretty difficult. I would only be able to show the app name and logo AFTER the package has installed.
Package installer is now feature complete!
You can now install packages with their dependencies and install progress will show in a notification (on all devices including mobile running on the creators update or above). Devices running earlier versions of Windows 10 will have the install progress inside the app like before but there are some notifications that pop up too.
Download it here: https://github.com/colinkiama/UWP-Package-Installer/releases
Source Code: https://github.com/colinkiama/UWP-Package-Installer
Wow!!! This is freaking Awesome ?
Seriously loved it so much... But maybe a progress bar in app should be appreciated ?
EP1CNESSHD said:
I can fix 1. and 2.
But I need help with the suggestion. I need a way to get the metadata out of the package. My app handles a StorageFile object so it's pretty difficult. I would only be able to show the app name and logo AFTER the package has installed.
Click to expand...
Click to collapse
There's gotta be a way... Built in App installer in PC can read those metadata... Can you investigate it?
maruf8 said:
Wow!!! This is freaking Awesome
Seriously loved it so much... But maybe a progress bar in app should be appreciated
Click to expand...
Click to collapse
It might be possible using the extended execution and the "extendedExecutionUnconstrained" restricted capability. I've released the source code so anyone could add it in. I'm done with the project right now. I'll just open it up as an issue.
EP1CNESSHD said:
It might be possible using the extended execution and the "extendedExecutionUnconstrained" restricted capability. I've released the source code so anyone could add it in. I'm done with the project right now. I'll just open it up as an issue.
Click to expand...
Click to collapse
Alright... Thanks for your hard work ☺
maruf8 said:
There's gotta be a way... Built in App installer in PC can read those metadata... Can you investigate it?
Click to expand...
Click to collapse
There are some things that Microsoft know that they don't document. I'll open this up as an issue too. I've done research of my own but haven't found anything.
I can't seem to get this working in my Lumia 625, whichever app I try to install it just gives me a "The parameter is incorrect" I already installed the dependencies and have interop and cap unlock from Interop Tools, meanwhile Interop Tools can install apps normally (not entirely sure you were aware or not but that has also had the install appx/appxbundle option since a while).
On another note would there be any hope of you adding the option to also install xap?
Ranomez said:
I can't seem to get this working in my Lumia 625, whichever app I try to install it just gives me a "The parameter is incorrect" I already installed the dependencies and have interop and cap unlock from Interop Tools, meanwhile Interop Tools can install apps normally (not entirely sure you were aware or not but that has also had the install appx/appxbundle option since a while).
On another note would there be any hope of you adding the option to also install xap?
Click to expand...
Click to collapse
pm me more details about your phone and what you did to get that error.
I'm also aware that interop tools has had this install feature. I don't know if it can show progress on the notifications like my app can though ?.
Lastly, no I can't add xap support. The API I'm using doesn't support them.
@EP1CNESSHD well this app did start on builds before CU, even on builds before AU, it allowed me to select an app and a dependency but when pressing Install both on a build before AU (10586.36) and after AU but before CU (14393.1066 and 14393.1715) it would give me the "The parameter is incorrect" error as I described, however once I managed to get CU (15063.297 and then 15063.608) it just started working normally, no error anymore, I didn't even update to the new build from after I reported the error (will test that one on 10586.36 and probably AU afterwards since you confirmed the Notification Extension requires AU soon) so my only guess is that something used actually requires CU, I'll have a look and try to find out what that is when I have some free time.
If anyone has devices on the anniversary update, can you try debugging the app on visual studio. You can clone the source code and even open the project directly in visual studio from github. The link is here: https://github.com/colinkiama/UWP-Package-Installer
Please report any errors you find while debugging to this thread.
EP1CNESSHD said:
I finally did it!
Click to expand...
Click to collapse
Yeah! This app is very useful! Thanks a lot!
After lots of testing and feedback, this app is now absolutely amazing for Mobile! Now on the Creators Update, you can check your install progress in the app and/or in your notifications. If you still have a Windows Phone with Windows 10 lying around then you should get this app ASAP!
[PC Users only]
On the other hand, Windows 10 for PC is still really annoying. PCs won't install any appx/appxbundle packages without their certificates existing in the "Trusted People" certificate store.
However, one person has created a working win32 installer that works around this. Unfortunately, they haven't finished it. Microsoft has made this unnecessarily difficult to sideload apps on PC without paying a lot of money for a certificate. I would love to see someone come up with a workaround for this that makes it easy for every developer to distribute their apps to everyone.
Lol, I've just realised that I never actually released the new version with multiple progress indicators so here it is!: https://github.com/colinkiama/UWP-Package-Installer/releases
Please Add support To Install XAP Apps On Pc Or Add Support To Install ARM Apps On X86/X64 Pc
ahmed605 said:
Please Add support To Install XAP Apps On Pc Or Add Support To Install ARM Apps On X86/X64 Pc
Click to expand...
Click to collapse
is not possible
EP1CNESSHD said:
I can fix 1. and 2.
But I need help with the suggestion. I need a way to get the metadata out of the package. My app handles a StorageFile object so it's pretty difficult. I would only be able to show the app name and logo AFTER the package has installed.
Click to expand...
Click to collapse
What's the metadata file (name) do you want to get from Appx file maybe I can help you, do you mean "AppxManifest.xml"?
I want a Msixbundle installed. Can this do it if I rename it to an Appxbundle?
This project has been incorporated into another larger and multi-device: TOOL ALL IN ONE
I decided to create a fast and secure program to simplify modding on these watches. At this moment only the Amazfit Pace si supported, when there are more guide on Amazfit Stratos i will upgrade this tool. Remember to unlock your amazfit bootloader you always need of unlock code from https://unlockamazfit.com/
Huami AMAZFIT Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers;
Unlock Bootloader;
Install APKs;
Uninstall APKs;
Reboot Device;
Update the Tool to latest version;
Enable App List;
Set english as default language (Not available for Stratos);
Take screenshoots;
HOW TO INSTALL
Download .zip file;
Right click on zip and go in file properties;
Set "Unblock", then click on "Apply" and "OK" (If you don't see it continue the installation guide). Guide picture:
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog. (If you have some problem during the update, press continue)
CHANGELOG
#1.0.1.1
Little fix in the new function "Flash Stock ROM".
#1.0.1.0
Added a new function "Flash Stock ROM", it will install a stock ROM on you smartwatch;
General Bugfix and Improvements.
#1.0.0.8
Solved a bug in the unlock bootloader option, now it works perfectly;
Added automatic check device when one device will be plugged in pc;
General BugFix and Improvements.
#1.0.0.7
Fixed English language setter, now it works perfectly;
Added version number in "Other Info";
Little Fix in APK Uninstaller.
#1.0.0.6
Fixed a little in bug in the screenshot file manager;
#1.0.0.5
Blocked "Set English Language" for Stratos;
General Bugfix and Improvements;
#1.0.0.4
Added AMAZFIT Stratos to official support;
Added new option to install Drivers;
New Screenshots functions: now you can take a screenshot and import it on your pc;
Added Other Info, here you can open this XDA thread, you can delete the downloaded Drivers and you can send me a mail;
Fixed Check Data options, now will check good data also for english version;
General Bugfix and Improvements.
#1.0.0.3
Fixed support model name (Added to auto recognizer "Amazfit Pace");
Fixed some buttons;
General BugFix and Improvements.
#1.0.0.2
Initial Release
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]. Please contact me if you see a bug
DOWNLOAD
Huami AMAZFIT Tool
( Alternative Link )
( Another Alternative Link )
Stock ROMs
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
R-iel said:
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
Click to expand...
Click to collapse
It's not necessary, but if you install an apk you need of app list to open it on your amazfit
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
1immortal said:
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
Click to expand...
Click to collapse
In the next update you will see it:good:
Congratulation!
With this tool can I install watch droid?
Thanks
arp said:
Congratulation!
With this tool can I install watch droid?
Thanks
Click to expand...
Click to collapse
Download the apk you want to install and then you can install it through the APK Installer option in this tool
Big Thanks!
Can i re-lock bootloader ?
Thanks
boumboum said:
Big Thanks!
Can i re-lock bootloader ?
Thanks
Click to expand...
Click to collapse
At this moment i have not found a lock command that works, when i find it i will add an option to lock bootloader in the tool
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
deboopi2 said:
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
Click to expand...
Click to collapse
Have you tried to install drivers through the tool?
Yes, but it did not help.
I started all over on another pc and now I can continue.
Thanks
rom installation
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
neolamp79 said:
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
Click to expand...
Click to collapse
Thanks, at this moment you can't install a rom with a this tool, in the next update i think i will add a function to auto install the 2 stock rom for amazfit pace
Great..
Can i install apks without unlock bootloader?
Thanks..
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes you can.
Sent from my HTC 10 using Tapatalk
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes, you can
HELP!
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
podgaard said:
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
Click to expand...
Click to collapse
Have you installed drivers before try to unlock bootloader?
mauronofrio said:
Have you installed drivers before try to unlock bootloader?
Click to expand...
Click to collapse
Yes, I installed them from the app., and the watch is showing Fastboot on screen!.