Any experiences on this desk charger from ebay? - HTC EVO 3D

http://www.ebay.com/itm/USB-Battery...818692?pt=PDA_Accessories&hash=item43aa59c504
Looking to pick one up for primarily charging/syncing but most likely will be just charging since USB charges slower than the wall but I'm not sure if this charger charges at 1A or not.

I just ordered one yesterday. I need it to charge the fat extended batteries in the back slot. I am hoping that that if it doesn't come with a 1.0ma charger, I will be able to use one that I already have and get a decent charge time.

ive bought many ebay docks for many phones from many chineese dealers. these days i only buy from nakedcellphone

Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!

stanglifemike said:
Only see one pic in the link when viewing on my phone, maybe there's only 1 pic, not sure. Anyway, from what I can tell, it looks just like the one I have. Mine works great for charging my phone and my HTC and Anker batteries. Phone docks nicely naked, and actually also works with some silicone an tpu cases. Seidio Surface w/kickstand case works, and even my Otterbox Commuter which really surprised me!! The charging tip just barely goes in deep enough to initiate charging with the Commuter. That's the only issue when trying to dock with thicker cases: The phone/case fits in the dock, but the charging tip isn't long enough to initiate charging. I assume that if it was much longer though it would cause the phone to not sit flat because the charging tip wouldn't bottom out in the phone (hope I'm making since here where you can understand me, lol, trying to explain it where it makes since).
Anyway, bottom line is the dock works great and well worth the money. I bought a generic dock for my Evo 4G and it never gave me a single issue. To my knowledge its still working great for the guy who bought my Evo 4G an all accessories... I'm gonna buy a generic Ebay dock for whichever phone I purchase next too. I have yet to see the need to spend more money on a dock with a name printed on it. Most of those don't have a spot in the back to charge an extra battery either, which is an absolute must for me! I probably use the battery charger more than the dock itself. Go for it, you won't be disappointed!!
Swyped from my pimpin PG86100 using XDA Premium, boiiiii!!!
Click to expand...
Click to collapse
the desktop/full site will show more pictures if you scroll down. can you confirm if it's the same item you have and at what mA it charges at?

Related

Kidigi desktop dock pre-order, $20.65 shipped ETA to ship 8/8

No, I don't work for Mugen, no referral, no ties to them.
Nice looking Kidigi desktop cradle with 2nd slot for extra OEM size battery charging.
http://www.mugen-power-batteries.com/htc-evo-3d-usb-desktop-cradle-with-2nd-battery-slot.html#
have free shipping
use 123VC for 10% off
$20.65 shipped
see Mugen site for more pix
Does not seem to fit any cases, seem to fit naked phone only.
Mugen say ETA to ship on 8/8/2011

			
				
They don't say if it activates dock mode on the phone.
stopeject said:
They don't say if it activates dock mode on the phone.
Click to expand...
Click to collapse
It probably won't. I had their EVO 4G version with the slot to charge the extra battery and that didn't either.
if you have a case on your phone do you have to take the case off to make it fit when charging?
Seems like it, may work with the stick on decal skin though. Why can't they make an removeable insert like the iGrip car dock is beyond me....
I would like to know if it will activate dock mode on the phone.
munnarg said:
It probably won't. I had their EVO 4G version with the slot to charge the extra battery and that didn't either.
Click to expand...
Click to collapse
The EVO 4G didn't have a desktop dock mode.
bitslizer said:
No, I don't work for Mugen, no referral, no ties to them.
Nice looking Kidigi desktop cradle with 2nd slot for extra OEM size battery charging.
http://www.mugen-power-batteries.com/htc-evo-3d-usb-desktop-cradle-with-2nd-battery-slot.html#
have free shipping
use 123VC for 10% off
$20.65 shipped
see Mugen site for more pix
Does not seem to fit any cases, seem to fit naked phone only.
Mugen say ETA to ship on 8/8/2011
Click to expand...
Click to collapse
Thanks for the info! I actually think I like that one better than the one I ordered off of ebay a few days ago. I may get this one too and then have one for work and one for home, but I use the Defender at work so that would be an issue...I dont know, just thinking out loud...
I had my eye on that one for about a month and kept searching for a US seller to buy it from as it would be easier to return if anything was wrong with it. I finally found one last week at Amazon that looks like the same one, but rebranded: "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle / Desktop Docking Station for HTC EVO 3D".
Search Amazon for ASIN: B005DIJOZQ and you'll find it.
The one I ordered arrived today and I am now testing it. So far, so good. It does a good job of charging the phone and holds the device at a good angle for watching shows, etc. I watched two episodes of 'Game of Thrones' on HBOGo using this cradle tonight.
I like the spare battery slot because it holds the battery upright instead of horizontally and uses less desk space. I'm still charging a battery in the slot now, so I can't tell you how well the spare battery slot works yet, outside of noting it is a bit of a snug fit, even for the OEM battery that came with my Evo, but it does seem to fit.
There are two LED lights on the front. So far, the left light remains blue and the right light remains green. I haven't seen them change as I've charged batteries or removed phone or battery from the phone, so I'm not sure they do anything significant at all.
I'll report back when I've had enough time to charge the spare battery in the slot now. I am very interested to hear reports from anyone who buys the Kidigi branded cradle too. I need a second cradle so I have one for the home and another for work, and I'm waiting to buy the second until I've had some time to test this one.
Oh yeah, I can confirm that the RND branded cradle I ordered from Amazon only fits the phone in the original case or at least cases that add no extra dimension to the Evo 3D. Also, the spare battery slot would not fit an extended battery that is larger in dimension than the original battery.
stopeject said:
They don't say if it activates dock mode on the phone.
Click to expand...
Click to collapse
The RND model I bought does not activate dock mode automatically. If it truly is the Kidigi model with rebranding, then I expect the Kidigi model doesn't either.
It looks nice...not a bad price either...
zomg that 3d is running honeycomb lol
stanglifemike said:
Thanks for the info! I actually think I like that one better than the one I ordered off of ebay a few days ago. I may get this one too and then have one for work and one for home, but I use the Defender at work so that would be an issue...I dont know, just thinking out loud...
Click to expand...
Click to collapse
My eBay dock came in today and I love it! Big thing for me is charging an extra battery, which the eBay dock does. Also, my phone fits in the dock with either the HTC silicone case or the Otterbox Impact, but the charging nipple doesn't go in deep enough to trigger charging. I'm sure that could be modified to work quite easily though if anyone cared to, I don't....
Sent from my PG86100 using XDA Premium App
After testing the RND dock I posted about yesterday, I have found that the spare battery slot doesn't work very well. You have to fiddle with a battery to get it to make a good contact and it's pretty unreliable for charging the spare.
The dock section for the phone works well, but if you are like me and want a dock that simultaneously charges a spare battery, pass on the RND model.
If someone has a better experience with the Kidigi model, I'd be interested in hearing about it. I still think it likely these are the same cradle branded differently, but I could very well be wrong. The pictures just look too close for comfort for me.
supposedly, the Seidio model, which does NOT have a spare battery compartment, does activate dock mode, and since there are removable inserts, will fit phone with some cases still on them..I ordered one, and hoping for delivery today or tomorrow
copped the kidigi model finally after going back and forth
I really wanted that one as well, but, I don't want to have to take my case off constantly to dock the phone when at my desk; I hope the Seidio dock allows for my otter box to stay on while docked..
I tried to order that Kidigi dock when they first posted it, but even a month ago, they were only saying "tentative" shipping in August...Let us know how it works for you!
stanglifemike said:
My eBay dock came in today and I love it! Big thing for me is charging an extra battery, which the eBay dock does. Also, my phone fits in the dock with either the HTC silicone case or the Otterbox Impact, but the charging nipple doesn't go in deep enough to trigger charging. I'm sure that could be modified to work quite easily though if anyone cared to, I don't....
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Do you have a link or a brand name?

Too good to be true?

I can't believe for any reason that all this would come cheaper than $10.
http://www.ebay.com/itm/Black-S-Sha...ccessories&hash=item20c014ce8a#ht_3277wt_1396
Just wondering if anyone else had seen this...
It's true. I got same case for $2.95 and it's a great case. For the rest I can't comment. Anyway, you can't go wrong with this deal. China shipping baby...
Sent from my SAMSUNG-SGH-I777 using Tapatalk
It's true.. just some cheap stuff from China lol =P but ships from the US instead.
Purchased! I can't believe that price lol. Well to anyone who is interested, that is a deal to jump on.
I bought some stuff from itrimming years ago, yes cheap, I don't remember if I bought the radio transmitter, the case for my zune, charger, extended battery or what, but something I bought "broke" and something I bought "worked" so I should it was
What's a good rating on chargers for our phones battery? mAh rating etc. I'd like to get a car charger that won't quickcharge the battery but do the same "full" charge like an AC/USB charger
I just received my order from them. I got the same one execpt without the ac charger. It all works good. The case fits so well that the rockers are almost invisible on the sides. The clear shield is cut very accurate but a little small all the way around. Having not used any other shield that may be the way they all are cut. I don't work for them as everyone seems to point out.
I got one, I figured "tough case" incase I decide to go do or be somewhere where my phone might need it instead of my "pretty" SGP Neo Hybrid. + I needed a car charger. 8 bucks ain't bad.
Edgarhighman said:
I got one, I figured "tough case" incase I decide to go do or be somewhere where my phone might need it instead of my "pretty" SGP Neo Hybrid. + I needed a car charger. 8 bucks ain't bad.
Click to expand...
Click to collapse
Haha yeah I really wanted one of those cases but when I saw this deal i couldn't resist. I'll let everyone know how it fits etc. and if the accessories work once it all comes in. I ordered yesterday, shouldn't be too far away!
Ended up buying one myself. I'm sure the chargers will break sooner or later, but for the price . . . why not?
I have the same case, just got it on Friday. I've bought accesories many times from Itrimmings on e-bay and have never been dissapointed.
For that price i couldn't refuse....Nice case by the way doesn't add weight to the phone.
I have this case from itrimmings and LOVE IT.
I got the case and a different chargers in the full package today for 8 bucks it's alright but I don't feel comfortable dropping the phone in this case
Sent from my SAMSUNG-SGH-I777 using XDA App
I guess now it is too good to be true.
"This listing was ended by the seller because the item is no longer available."
pics anyone?
For the $8 bucks, I'll tell you this. . . Well worth the $$ I paid. I got an extra wall charger for work, extra USB cable for the computer/lappy, extra car charger for trips.
The case, VERY NICE for what it cost (I think with everything else, the case would come out to $4) I am having some trouble getting used to the power button being harder to press, but other then that I can't say anything bad about it.
All the holes fit perfectly, it *kinda* sticks in your pocket, so its hard to pull it out while driving if needed. Other then that, I'd have to say its good enough for my needs.
A cheap case is fine, but your phone could flame up or explode using the wrong battery or charger. I think someone died once because of a pocket explosion.
Nice case for a decent price. Like the looks of it, but can't stand the feel of TPU.
Can anyone comment on whether the car charger (and wall charger) works with i777? I got a generic car charger when I upgrade the phone, but when I plug the phone into it in the car, the battery level _drops_ instead of increases! That basically makes it impossible to use the phone as GPS...
Amazing deal. Thanks!!!!
Just bought it

Extended Battery Case

Short version:
We would like an extended battery case that slips over our EVO LTE like much like a normal case would. This case would however have a USB that plugs into our phone and adds additional battery life. $49.99 will be a good price. Thanks.
P.S. If someone could please link to the site that makes these power packs, that would be great.
Schlong version:
2000 mAh stock battery won't cut it for me. It's big, but not BBC big. I'm use to a big 3500 mAh battery in my OG Hero/Epic 4G.
I need a nice, big, black, thick, powered battery case to go over my unit. This will ensure it's protected and juiced up. Ya, now getting back to the phone....
The thought of carrying around a big power brick to charge my phone is just disgusting and IDK when it became acceptable to XDA users to do this. You didn't do this when you bought your extended battery for your OG Epic 4G. Might as well just bring your charger and plug it in. I do own a 4000 mAh Energizer power brick and it's cool when I go camping or on road trips.......that's it. Not really on road trips because i'll use a cigarette lighter charger. That's much cooler and I get to annoy the driver and passenger as I sit on the floor between them.
I want to charge my phone over night and be set for two days. I need this power. It is not a question of will I use that much. Yes, yes I will. And you will too. We need an extended battery case similar to the Galaxy S II power pack on youtube. Look it up. You will cry out the code for HTC's kernel. Think about it. You know you want it.
Someting like this
http://androidcommunity.com/powerskin-extended-battery-case-lands-for-the-htc-one-s-20120521/
Sent from ummm ... Give me a day or two so this can say what we are all wanting.
Yes. That's it. The button on the side is hideous.
Sent from my wife's purple Optimus.
The button on the side is the Micro USB adapter that you are using to charge your phone. No button no charge.
Will
I'm looking for something just like that. Hopefully since HTC is moving towards non-removable batteries more companies will put out these kind of products.
i wouldn't mind a case that has a built in swappable battery, and wireless charging
I want one of these for our new phones!!
removed
Having the plug stuck out like that on the silicone portion of the case scares me. Coming from the OG Evo, I'm experiencing the dead usb port problem, which is caused mostly by USB cords being pulled/weighted (e.g. usb cords in cars pulling from below while on landscape). I almost think that something like this needs to be a two piece hard case that slides together from the sides and prevents any flexing of the plug, otherwise we're going to see something like a user accidentally swiping a hard surface with the plug side of the phone and breaking the usb port. Of course, no interchangeable batteries makes this situation a really tough one.
Might be interested if the case WASN'T Silicone... that **** is horrible. Now, TPU or something better like the material used for the Speck iCrap phones, I'm sold!
Check my thread on the official extended battery request.
Seidio is making one.
Sent from my EVO using Tapatalk 2
There is a case being made by seidio
there is a case like that being made from seidio and slated for a july release.....
well i just saw the seidio power case for the iphone, and im very optomistic based on the design for the battery case that it wont add as much bulk as xpal powerskin would add. http://youtu.be/nlfJmmYjPKU
It looks pretty slim before the silicone is added on.
I assume since this is seidio first battery case that their version for the evo 4g lte will look very similar.

Car Dock/Holder?

Anyone know of a car dock or holder for another phone that may work with LTEvo?
Sent from my LTEvo using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
bighuta said:
http://forum.xda-developers.com/showthread.php?t=1667679
Also available in Sprint retail stores for less than $40
Click to expand...
Click to collapse
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Thanks, but i mainly just need something to hold my phone. I don't use the NAV on my phone anymore, so i just need something so my phone isn't sitting in my cupholder.
looks sexy but...
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
EDIT:
after taking the insert out and using the pads in the box it works great!
sandtrapjack said:
I just received that dock yesterday. First impressions are very good. One small exception.
I use the Platinum case that I got at Best Buy, which is essentially the same as the Seidio case.
The phone docks fine, but the case causes the phone to "tilt" a bit to the left. Even with the sleeve out of the dock, it still tilts a bit and does not seat all the way.
But it is barely noticeable and the dock works great.
If you get this dock, be advised that it does not come with a microUSB cable for connecting the dock to your 12v supply in your vehicle. But if your former phone was an EVO 4G like me, you probably have many of those cables laying around any way.
If you do not use a case, however, with the sleeve in the phone fits like a glove.
If you have seen or used the Seidio dock for the OG, like I did, the first thing I can say about this new dock is even though the EVO LTE is larger than the OG, the dock is less intrusive on the windshield.
Click to expand...
Click to collapse
It does tilt a bit, but that's what those two tiny foam pads that came with it are for. I put one on the right bottom side and the other on the middle nearer to the backside of the phone. It's almost perfectly balanced now.
bds369 said:
I just got my Diztronic case which is absolutely the perfect case and it will not fit in the dock. Not quite sure what to do... I'm leaning towards returning the dock.
Click to expand...
Click to collapse
I have the same case and it fits fine in the car dock. Did you remove the extra insert? There's an insert (adapter) that is in there for a naked LTE. It just pops right out and your Diztronic covered LTE will fit right in there. Make sure to use the two foam pieces on the right hand side so your phone doesn't tilt.
http://www.amazon.com/dp/B003SE6LD0
This is what I used with my Photon and it works perfectly with the evo lte. Just turn it sideways and turn on car mode. It holds TIGHT to the windshield and wont come off.. even in Texas heat. For extra fun take a nfc tag and have it auto launch car dock when near

[VIDEO] Verizon Wireless Droid DNA Wireless Charging with a TPU Case

I've been making little videos for the past couple of days since I bought so much little stuff. I'm exhausted. Basically went to a Verizon store, slapped my DNA down on the mat and it started charging. For something to work so well out of the box, I was a little surprised. Usually just about everything requires some kind of setting modification.
What I was really looking for was a case. I hated the fact that they only had a pink and blue TPU case. The Otterbox did show up online, but neither of the two stores I visited had them. For S&G, I went ahead and asked for the TPU case to try it on. It fits pretty snug, and I have other videos on that. What I really wanted to know is if the DNA would charge with the case on. While he was grabbing the case I hovered the phone over the mat. It charged. Good sign there...
After putting the TPU case on, I tested it out and everything worked. As I went home, I was thinking that the case would probably make the charging really slow. By the end of Black Friday my phone was pretty much dead. I got home, put it on the pad, and it does charge alright. I'll try to run the phone down twice in the future to compare the factory charger with the mat.
With the Otterbox Defender Case
EDIT: Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
With the Otterbox Commuter Case
Removal of Speaker from LG WCP-700
Many people don't like the speaker because it will cycle once charged and beep over and over again. Other solution would be to get use to it or take it off the charger once it is charged.
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Also works perfectly with the Verizon Shell/Holster combo. I keep the shell on for the built-in kickstand and it charges without issues.
thenickisme said:
Thanks for this! I know a lot of people asked for that. I believe this charger is from the older gen of the wireless charging standard which allows for a distance of 4mm. So most cases should be fine. Don't quote me on this but the newest revision of the qi standard allows for 40mm which will be very nice. (good for building into desks and such)
Also as a fellow owner of the LG pad, having that extra distance would be nice because sometimes the phone has to be readjusted to get it to work.
Click to expand...
Click to collapse
No problem. I'm going to have to look at the standards now. I didn't think I'd enjoy this feature as much as I do. That was probably because I assumed the phone had to be naked.
Sent from my HTC6435LVW using Tapatalk 2
DNA with Otterbox
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Geofiveo said:
Yes please do keep us posted once you get the otterbox because I'm looking at getting the same setup. I already have the black TPC case but want to go to the Commuter versus the Defender.
Click to expand...
Click to collapse
If the Commuter was available I would have ordered it today... I did go ahead and get the Defender. Definitely need to log charge times between all the scenarios.
Bump. Added the video of the Otterbox Defender case. A little less forgiving on the placement. Expect charging times to increase even more. Even with the TPU case it looked like the charge took twice as long as with a MicroUSB cable. This is okay if you're going to have it on the charger more due to ease though.
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
jonah1234 said:
Can you post a vid of how to take the speaker out of the wireless charging pad please? Thanks in advance.
Sent from my HTC Droid DNA
Click to expand...
Click to collapse
No problem buddy. Just has to encode now (the video). I'm glad you asked me to do it.
*update OP* w/ video of speaker removal
Defender
The otterbox defender case makes wireless charging almost not worth it but i can attest that it does work with the Lg pad from verizon.
Kind of depends on what you're goal is here. I think the wireless charger was designed for longer use from the beginning. Times when you ordinarily wouldn't go through the hassle of putting a phone on the charger, you can.

Categories

Resources