[Q] Bricked (seems unique) - Galaxy S II Q&A, Help & Troubleshooting

I've tried to look for this problem and haven't found anything similar. If it's already been addressed please direct me to the previous thread, if this is in the wrong place please move it.
I rooted my Galaxy S II a while ago and it's been working great. I wanted to try Cyanogen mod 7 and so I followed the instructions on their website. Trying to use ROM manager gave me a weird error message telling me that there was an invalid signature or something, despite toggling everything and wiping the cache to turn it off. So I followed the "method via recovery" instructions. I did everything exactly as it is there, including the Google apps stuff, and it all seemed to work perfectly. Then I rebooted it hoping for it to boot into CM7, and instead, when it turns on it goes to the screen saying Samsung Galaxy S II with the yellow triangle underneath, and stays there. Every time it turn it on it goes to that screen and doesn't change. It's now been like that for half an hour. I can start it up into download mode, and I've tried flashing zImage to it again, but no change.
I have a NANDroid backup (it's backed up with CWM anyway), and I've copied the backup to my computer, but I have no idea how to apply it when the bloody thing won't turn on.
I'm using Linux with Heimdall (the cross-platform Odin clone).
Please help me. Unfortunately I have no internet in my flat so I won't be able to see any advice until tomorrow unless it;s given in the next ten minutes. God I really hope the thing's ok.

Hi
Do you have jigg? ( if you don't have it buy it from ebay or ask some friend of you )
With jigg you can enter download mode and then flash the stock rom.

Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Sent from my Transformer TF101 using xda premium

TheGhost1233 said:
Pull battery, wait 10s, then boot while holding power+vol-up+home. This should get you in recovery. Then restore nandroid.
Click to expand...
Click to collapse
I can't believe it was this simple, I knew power+vol-down+home got tme to downloading but I didn't know that got me into recovery. Everything's recovered now.
Thank you Dutch people!

Related

help phone will not go past vibrant screen

My phone is stuck on the vibrant scree and nothing happens........ i am trying to use odin to flash back to stick and it is always stuck on file analysis.....please help!!!!!!!!!!!!!!!
Try this: http://forum.xda-developers.com/showpost.php?p=8445823&postcount=11
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Remove the USB from the phone, remove battery.
Place the battery back in your phone and get back into DOWNLOAD MODE
Close Odin
Run Odin as Administrator
Select the 512 PIT FIle
Select the T959UVJFD.tar file for PDA
Plug in your phone (Make sure you see a COM Port come up)
Start Flashing
rolf90 said:
Well mine just sits on file analysis for 10 mins and nothing else happens...can someone please help me i have no phone.
Click to expand...
Click to collapse
as you i had the same problem and finally got it to work by watching this video on you tube:
1.go to you tube
2.search for flash vibrant
3.first video should be "Flashing Firmware with Odin on Samsung Vibrant" by ZDoomentral, its a 3:00 min video
(sorry can't post direct link but i a restricted since i am a new user)
pay close attention as to how he gets his phone into DOWNLOAD MODE, thats where i was going wrong, and just follow the directions of the video.
my phone is up and running with stock kernel and re-rooted it
man i just want to say i just had this same issue happen to be... im a truck driver and having my phone is serious... mainly to play games or what not...but i just got some from Minnesota and tried the odin method and saw that video on you which help give me a visual and its back up ... im very happy... sad to say it was a careless mistake somewhere but i did a back like i always do and it didnt work for some reason...i had a g1 before this vibrant and ive flashed a lots of roms... but anyway i wanna thank everyone one this forum ... i got my phone back
Does this restart the WHOLE THING? because I have information I didn't backup :/
Yes. It deletes EVERYTHING. Just like it's brand out of the box.
I recommend using Titanium Backup and back all your apps. ALWAYS ALWAYS, do a Nandroid backup before flashing ANYTHING.
scootatheschool1990 said:
Does this restart the WHOLE THING? because I have information I didn't backup :/
Click to expand...
Click to collapse
If you have adb up and running & have the ability to get into recovery while you're bricked you can do aN adb pull before flashing
Adb remount
Adb pull /sdcard
After un-bricking you can adb push the folders back
When I did it..it flash back to stock but I have titanium back up so mt phone is back to how I had it ...and I still have every thing else back on, like my movies music etc..
Sent from my SGH-T959 using XDA App
I was trying to help my friend with his Vibrant and now it's stuck at the splash screen in a loop. I can't seem to get it to download mode or recovery or anything. I've pulled the battery, held down both vol keys while pushing power. Any time I connect the usb, it just starts up the boot loop without giving me a chance to do anything else. I can never get to the green charging battery. Any ideas?
I guess I could provide more info... We had rooted the phone multiple times, but Superuser would FC every time. So, we decided to flash eugene's froyo build (http://forum.xda-developers.com/showthread.php?t=740558). That's when I got the boot loop. Odin said it was finished, and it did not go into recovery. It just started boot looping. Maybe I didn't wait long enough before hitting the power? I'm not sure. Anyway. I'm stuck.
EDIT: Unstuck now. I guess I just need to not panic and read more. I held both VOL keys in while connecting to USB and it went into downloading mode. SO, I flash a stock 2.1 ROM and it's back to the way it was. Calling works fine. No data though. Apparently, that was one of the issues before. I'll try rooting again, but it seems like there's another issue. Also... No settings survive reboots. Like turning on USB debugging... Strange.

[Q] Stuck on Vibrant splash, can't recovery/download via hard buttons.. HELP!

i've read almost every single post related on this subject, tried almost everything but no go.
recently, i installed SS-6 to my girlfriend's Vibrant but she didn't like it, so i attempted to revert to my nandroid from the original stock rom.. nandroid gave an MD5 error and did not installed.
at that point, i had already wiped data/cache, prior to nandroid.
i rebooted the phone, and now im stuck on the Vibrant splash.
i have tried to go to recovery mode via hard buttons but no go. i actually tested with another Vibrant and on that one, im able to get into recovery so it is not that i'm missing pressing a button or what not. been trying anxiously to see if im able to go either to download mode or get into cwm and flash cyanogenmod!
tried to use ODIN/ADB in order to boot into cwm to flash another rom, but it doesn't see the phone. ive already installed samsung drivers.
if i connect the charger, the battery indicator doesnt come up. it stays on that lined-circle screen forever, even after taking the USB cable out.
please help!
EDIT: added [Q] and added some more grammar errors.
any help is highly appreciated.
I had this same problem... The only thing that would fix it was this thing I had to buy called a Jig. It was less than $8 (with free shipping) on eBay.
http://www.ebay.com/itm/Fix-Download-Mode-USB-Jig-Samsung-Captivate-Galaxy-S-/140520601309
It delivered in 2 days and my phone is working perfectly now
just ordered one!
thanks!
one more thing, are you able to just install a different ROM through ODIN or ADB without having to do the full wipe? im wanting to save the contents of the internal SD.
thanks again

[Q] odin failed, flash recovery.bin cwm

i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10

[Q] Do I have a brick?

I have a Windows 8 PC and I rooted my i9300 using Mark Skippen's excellent toolkit (not a paid endorsement, BTW - I just have used his kits on other devices and love them) and was successful in flashing an insecure boot image, root, and busybox. I then installed and SuperuserSU and TWRP and made a nandroid of my system safely tucked on my microSD card.
My problems started when I tried to install CM10 for the i9300 and Gapps (I checked before I downloaded the ZIP from CM's site and I thought I had gotten the correct ZIP). For reasons I can't figure out, I got stuck in a bootloop at the CM logo. And when I say stuck, it wouldn't stop even after I pulled the battery and put it back - I would put the battery in and it would resume with the bootloop at the CM logo. I then tried to get into recovery using the keys on the phone and it still wouldn't stop. I couldn't find a solution with a cursory search and I couldn't get my PC, I couldn't get it to recognize my my phone when I plugged it it.
In what I know was a fit of frustration and stupidity, I tried to get Kies to "Emergency reformat my phone" and it kind of worked. The CM boot loop went away, but not it will only display the "Samsung Galaxy SIII i9300" logo and then shuts off. So, now I was wondering if anyone knows if there's a way to get my phone working again or if I've finally succeeded in making myself an expensive brick and I need to just start over again with a new one?
I don't mind constructive criticism and offers of last rites, but I'd appreciate if folks keep the plain old flame or troll posts to themselves. And, as always, any help or directions to locations/ threads to see if my SGS3 can be resurrected are especially appreciated.
Thanks all!
Can you get into download mode?
VolDown + Home + power
Have you tried using a usb jig?
Sent from my GT-I9300 using xda app-developers app
No jig, but I can get into download mode! :good:
WA_Bob said:
No jig, but I can get into download mode! :good:
Click to expand...
Click to collapse
Try CWM recovery. Problems appear every now and then with TWRecovery.
Just put it in download mode and flash a new ROM. I'd suggest JB if you wanna use it.
Okay - with some hair pulling and the SGS3 toolkit, I'm back on stock, rooted so all is right with my new toy. Thanks all for your help! I wouldn't have done it without you all!

Stuck at "Touch Android to Begin"

Alright Folks,
I have exhausted my search skills and probably messed up somewhere...Could use some guidance.
Background: I was updating a Slimrom and something went wrong on my end and I got stuck at Samsung boot screen. (Coulldn't get into recovery at all) I got to this thread http://forum.xda-developers.com/showthread.php?t=1457458 and followed the guide using ODIN and everything. Phone boots up but the back and search keys weren't working. Was able to make and receive calls but both parties couldn't hear each other. At this point I thought I should try rooting and get into recovery. I tried rooting using various methods ( DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit), [1-Click Root][Video Tutorial][No Odin required]) but they didn't work and I was unable to get into recovery again.
I was glad that something is working. Its not a paperweight, yet. So then I thought this is the software for 9100 I should try getting stock to i777's software.
So after that I followed Entropy's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows). Works fine ODIN says PASS. Boots with At&t logo and gets to "Touch android to begin" but when i touch it nothing happens. Couple pop ups appear time after time. "The application google services framework (process com.google.process.gapps) has stopped unexpectedly. Please try again" Also about Synchronization and calender. I tried to search but can't seem to find anything Useful.
I can get into download mode only.
Any help would be appreciated.
singhsta said:
Alright Folks,
I have exhausted my search skills and probably messed up somewhere...Could use some guidance.
Background: I was updating a Slimrom and something went wrong on my end and I got stuck at Samsung boot screen. (Coulldn't get into recovery at all) I got to this thread http://forum.xda-developers.com/showthread.php?t=1457458 and followed the guide using ODIN and everything. Phone boots up but the back but the back and search keys aren't working and couldn't hear the caller. Was recieving calls ok. So after that I followed Entropy's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows). Works fine ODIN says PASS. Boots with At&t logo and gets to "Touch android to begin" but when i touch it nothing happens. Couple pop ups appear time after time. "The application google services framework (process com.google.process.gapps) has stopped unexpectedly. Please try again" Also about Synchronization and calender. I tried to search but can't seem to find anything Useful.
I can get into download mode.
Any help would be appreciated.
Click to expand...
Click to collapse
I don't think you've actually searched, because it's been said s few times already that you have to boot into recovery and factory reset.
Sent from my Zanpakuto using Getsuga Tensho!
Thanks for the reply Nick. I did see that but thats the problem I am not able to get into recovery. The button combos are not working (Holding vol up, down and power until samsung screen comes on second time OR holding vol up, down and power and once screen comes on letting go of the power button)(from power down state, of course). I've tried multiple times. I did make a nandroid on my ext sd card before I flashed so if I could just get into clockwork recovery I would've tried restoring to that. I did read that there is an android recovery as well...I couldn't get into that either (I think).
Edit: I just tried it again and the Samsung screen comes on the second time but instead of going into recovery it goes to At&t boot screen and then to "touch android screen".
PS. I guess I should have stated clearly that I am unable to get into recovery for some reason. See, it was all making sense in my head when I writing the OP but I guess the point didn't get across. I wanted to be concise and precise. But I guess now the issue is more clear.
singhsta said:
Thanks for the reply Nick. I did see that but thats the problem I am not able to get into recovery. The button combos are not working (Holding vol up, down and power until samsung screen comes on second time OR holding vol up, down and power and once screen comes on letting go of the power button)(from power down state, of course). I've tried multiple times. I did make a nandroid on my ext sd card before I flashed so if I could just get into clockwork recovery I would've tried restoring to that. I did read that there is an android recovery as well...I couldn't get into that either (I think).
Edit: I just tried it again and the Samsung screen comes on the second time but instead of going into recovery it goes to At&t boot screen and then to "touch android screen".
PS. I guess I should have stated clearly that I am unable to get into recovery for some reason. See, it was all making sense in my head when I writing the OP but I guess the point didn't get across. I wanted to be concise and precise. But I guess now the issue is more clear.
Click to expand...
Click to collapse
The only thing I can think of at this point then is maybe trying to use adb
Sent from my Zanpakuto using Getsuga Tensho!
Check out my signature. You can unzip the portable adb on your pc and try the reboot_recovery file. This will only work if your machine can detect your phone and you have the right drivers.
Sent from my SGH-I777 using xda premium
Worked like a charm. Restored to stock with root. Flashed a kernel with cwm. Flashed new ROM (to update to latest Cwm). Restored last backup. This bad boy is up and running like new. Thanks to all you folks.
Sent from my S(in)GH - I777

Categories

Resources