Solution to problems of performance, stability and performance, running Minicm7. - Sony Ericsson XPERIA X10 Mini

IMPORTANT GUIDE FOR THE SOLUTION TO PERFORMANCE, STABILITY AND PERFORMANCE, RUNNING MINICM7.
using MiniCM7 by nobodyAtall
before commenting or asking about, lags, slowness or anything else, try theses steps, they could really solve all that
1 - Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: 53,404,015 M76XX-TSNCJOLYM-
(you should know that since you read miniCM7 thread's first post )
[*]2-Having the unlocked bootloader
3 - download the all in one package (ROM+kernel) by nobodyatall
4 - Backup all files of your micro sd on the PC, because it will be formatted to perform the installation.
[*]5- format your microSD (using the phone option OR sd card formatter which is better than windows's formatter)
6 - Enter flash mode, and proceed to flash the last nAa kernel (nAa06 for miniCM7-2.1.5).
7 - Disconnect the PC mobile phones and switch it on. As nAa logo appears, repeatedly press the Back button to enter recovery mode.
- Then we enter the recovery mode, connect your phone to your pc, and CWM options, we look in advanced options, mounting usb.
- Pc, we detect the micro sd in our mobile, we proceed to format it, then copy the zip file renamed to update, and google apps.
--> theses two steps are in case you couldn't format before
8 - Disconnect the PC mobile phones, we enter the initial menu of CWM,
- Select 'Backup and Restore -> Backup'
- Select 'wipe data / factory reset' (Suggested)
- Select 'apply update from sdcard'
- Flash GAPPS​
Reboot (The first boot will take approximately 3 minutes)
9 - After installing the rom, no clean junk files, previous rom conflict with minicm7 performance, and we have no real work of our mobile,
10 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above (android_secure ...) , after performing this step, restart the phone, and go.
11 - We now have our minicm7 running, fast, stable and with impressive performances.

---

ronaldvalles said:
IMPORTANT GUIDE FOR USERS WITH PROBLEMS OF PERFORMANCE.
Well I will describe the steps to be useful:
1 - Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: 53,404,015 M76XX-TSNCJOLYM-
2-Having the unlocked bootloader
3 - download all in one package nobodyatall
4 - All files, your micro sd stored on the PC, because it will be formatted to perform the installation.
5 - Enter flash mode, and proceed to flash the kernel naa 5b.
6 - Disconnect the PC mobile phones, as naa logo appears repeatedly press the Back button to enter recovery mode.
7 - Then we enter the recovery mode, connect your phone to your pc, and CWM options, we look in advanced options, mounting usb.
8 - Pc, we detect the micro sd in our mobile, we proceed to format it, then copy the zip file renamed to update, and google apps.
9 - Disconnect the PC mobile phones, we enter the initial menu of CWM,
- Select 'Backup and Restore -> Backup'
- Select 'wipe data / factory reset' (Suggested)
- Select 'apply update from sdcard'
- Flash GAPPS
• Reboot (The first boot will take approximately 3 minutes)
10 - After installing the rom, no clean junk files, previous rom conflict with minicm7 performance, and we have no real work of our mobile,
11 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above, after performing this step, restart the phone, and go.
12 - We have our minicm7 running, fast, stable and impressive performance.
It is suggested, try the steps in this guide created by me, before placing COMMENTS, THAT IF THE ROM IS lagging unstable.
Because the wonderful work and FreeXperia Nobodyatall is phenomenal in every update, it is great.
Greetings Matmut if you want to add this guide to the FAQ, I'd appreciate it, be of good help.
I hope it was of good help these instructions, if you believe it was a great help to press the THANKS button.
This is a contribution to the advancement of our Minis.
Sorry for my bad English.
Click to expand...
Click to collapse
i appreciate your work but we allready have instalation guide

---

ChavitoArg said:
i appreciate your work but we allready have instalation guide
Click to expand...
Click to collapse
yes we do
but this one is better for people that have lag after upgrading
thank you man !
I will add some comments about the guide itself later
this should be in Q&A maybe and stickyed there
(i'll put a link in my faq so that you'll keep thx for you too )

---

ronaldvalles said:
"11 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above, after performing this step, restart the phone, and go."
Click to expand...
Click to collapse
This doesn't really make sense...what exactly do you mean?
Copy the music, videos, and apk files to another folder, format the SD card, and put them back in, and then reboot??...aren't there files in the SD card that the Operating system uses?

---

Kostas1601 said:
This doesn't really make sense...what exactly do you mean?
Copy the music, videos, and apk files to another folder, format the SD card, and put them back in, and then reboot??...aren't there files in the SD card that the Operating system uses?
Click to expand...
Click to collapse
friend trying to say in this step is that the above files we had in the micro sd, we'll go back to SD after installing the rom, but we will not overwrite the folders you create the system in the first start micro sd, Greetings
hopefully they will clarify the question,
for example. androidsecure, and other system folders, because the old files with the current mix and produce slow down the system therefore does not work 100%.
and the files are cached, images, lists, and others, I invite you to try this guide, and you will have good results.

---

configuration
I use the following configuration, and the truth that goes very well on my phone,
compcahe off
governor interactivex
not undervolt
overclok not
jit enabled
turned home in memory
sms in memory activated
stack size of 32 m
128k cache sd card

---

ronaldvalles said:
I use the following configuration, and the truth that goes very well on my phone,
compcahe off
governor interactivex
not undervolt
overclok not
jit enabled
turned home in memory
sms in memory activated
stack size of 32 m
128k cache sd card
Click to expand...
Click to collapse
for a better battery life (but maybe instability? it depend on your phone...) you can activate undervolt
---------- Post added at 05:06 PM ---------- Previous post was at 04:48 PM ----------
here is my little suggestion about your guide :
(i surely add a link to my FAQ when there will be a definitive version )
IMPORTANT GUIDE FOR USERS WITH PERFORMANCE PROBLEMS.
using MiniCM7 by nobodyAtall
1 - Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: 53,404,015 M76XX-TSNCJOLYM- (you should know that since you read miniCM7 thread's first post )
2-Having the unlocked bootloader
3 - download the all in one package (ROM+kernel) by nobodyatall
4 - Backup all files of your micro sd on the PC, because it will be formatted to perform the installation.
4b- format your microSD (using the phone option OR sd card formatter which is better than windows's formatter)
5 - Enter flash mode, and proceed to flash the last nAa kernel (nAa05 for miniCM7-2.1.3).
6 - Disconnect the PC mobile phones and switch it on. As nAa logo appears, repeatedly press the Back button to enter recovery mode.
7 - Then we enter the recovery mode, connect your phone to your pc, and CWM options, we look in advanced options, mounting usb.
8 - Pc, we detect the micro sd in our mobile, we proceed to format it, then copy the zip file renamed to update, and google apps.
--> that's too complicated see step 4b
9 - Disconnect the PC mobile phones, we enter the initial menu of CWM,
- Select 'Backup and Restore -> Backup'
- Select 'wipe data / factory reset' (Suggested)
- Select 'apply update from sdcard'
- Flash GAPPS
• Reboot (The first boot will take approximately 3 minutes)
10 - After installing the rom, no clean junk files, previous rom conflict with minicm7 performance, and we have no real work of our mobile,
11 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above (android_secure ...) , after performing this step, restart the phone, and go.
12 - We have our minicm7 running, fast, stable and impressive performance.
in attachment, there is the version with ready to modify BBcode

---

matmutant said:
for a better battery life (but maybe instability? it depend on your phone...) you can activate undervolt
---------- Post added at 05:06 PM ---------- Previous post was at 04:48 PM ----------
here is my little suggestion about your guide :
(i surely add a link to my FAQ when there will be a definitive version )
IMPORTANT GUIDE FOR USERS WITH PERFORMANCE PROBLEMS.
using MiniCM7 by nobodyAtall
1 - Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: 53,404,015 M76XX-TSNCJOLYM- (you should know that since you read miniCM7 thread's first post )
2-Having the unlocked bootloader
3 - download the all in one package (ROM+kernel) by nobodyatall
4 - Backup all files of your micro sd on the PC, because it will be formatted to perform the installation.
4b- format your microSD (using the phone option OR sd card formatter which is better than windows's formatter)
5 - Enter flash mode, and proceed to flash the last nAa kernel (nAa05 for miniCM7-2.1.3).
6 - Disconnect the PC mobile phones and switch it on. As nAa logo appears, repeatedly press the Back button to enter recovery mode.
7 - Then we enter the recovery mode, connect your phone to your pc, and CWM options, we look in advanced options, mounting usb.
8 - Pc, we detect the micro sd in our mobile, we proceed to format it, then copy the zip file renamed to update, and google apps.
--> that's too complicated see step 4b
9 - Disconnect the PC mobile phones, we enter the initial menu of CWM,
- Select 'Backup and Restore -> Backup'
- Select 'wipe data / factory reset' (Suggested)
- Select 'apply update from sdcard'
- Flash GAPPS
• Reboot (The first boot will take approximately 3 minutes)
10 - After installing the rom, no clean junk files, previous rom conflict with minicm7 performance, and we have no real work of our mobile,
11 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above (android_secure ...) , after performing this step, restart the phone, and go.
12 - We have our minicm7 running, fast, stable and impressive performance.
in attachment, there is the version with ready to modify BBcode
Click to expand...
Click to collapse
very good friend, is very good correction and a little easier to understand, I hope greetings for users to be of great help,
is better to perform these steps before commenting, whatever that if the slow, performance, and others.

---

ok
so :
a few correction added to the previous version
__________________________
IMPORTANT GUIDE FOR USERS WITH PERFORMANCE PROBLEMS.
using MiniCM7 by nobodyAtall
before commenting or asking about, lags, slowness or anything else, try theses steps, they could really solve all that
1 - Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: 53,404,015 M76XX-TSNCJOLYM-
(you should know that since you read miniCM7 thread's first post )
[*]2-Having the unlocked bootloader
3 - download the all in one package (ROM+kernel) by nobodyatall
4 - Backup all files of your micro sd on the PC, because it will be formatted to perform the installation.
[*]5- format your microSD (using the phone option OR sd card formatter which is better than windows's formatter)
6 - Enter flash mode, and proceed to flash the last nAa kernel (nAa05 for miniCM7-2.1.3).
7 - Disconnect the PC mobile phones and switch it on. As nAa logo appears, repeatedly press the Back button to enter recovery mode.
- Then we enter the recovery mode, connect your phone to your pc, and CWM options, we look in advanced options, mounting usb.
- Pc, we detect the micro sd in our mobile, we proceed to format it, then copy the zip file renamed to update, and google apps.
--> theses two steps are in case you couldn't format before
8 - Disconnect the PC mobile phones, we enter the initial menu of CWM,
- Select 'Backup and Restore -> Backup'
- Select 'wipe data / factory reset' (Suggested)
- Select 'apply update from sdcard'
- Flash GAPPS​
Reboot (The first boot will take approximately 3 minutes)
9 - After installing the rom, no clean junk files, previous rom conflict with minicm7 performance, and we have no real work of our mobile,
10 - Proceed to copy all the files used by the user, just music, videos, apps, but no rom folder or file above (android_secure ...) , after performing this step, restart the phone, and go.
11 - We now have our minicm7 running, fast, stable and with impressive performances.
__________________
now you can edit your first post, with this or a modified version of this guide using the following attachment
and then i'll link it in the FAQ 3d post (because all credits go to you since you had the idea and made it )

---

solution
Fixed several issues with respect to performance thanks to this guide, I thought it would not be achieved, solutions.

---

ronaldvalles said:
Fixed several issues with respect to performance thanks to this guide, I thought it would not be achieved, solutions.
Click to expand...
Click to collapse
Minicm7 what the 2.1.3 update to 2.1.4, but I had problems with Lagui, solved,

---

Thanks
It works very well!! miniCM7.1.5 is very laggy in my phone, but I follow the instructions in this post and now the permormance is AMAZING!! Thanks bróder!!

---

DarkestPriest said:
It works very well!! miniCM7.1.5 is very laggy in my phone, but I follow the instructions in this post and now the permormance is AMAZING!! Thanks bróder!!
Click to expand...
Click to collapse
greetings remember that we are to improve our minis do not worsen, greetings,

---

how do i know if i have performance issues, launcher was a little bit laggy, but i just installed v6 supercharger which solved this too
im only updating without factory restet/full wipe since something like mini cm 7.0 rc (edit: to be more specific i think it was miniCM7-2.0/CM7.1 port) , im not sure, maybe there is some benchmark so i can check if its too slow, or could be faster than now at least. In my opionion its pretty fast already, but maybe i only think it is fast
edit. im using nAa-06 kernel with minicm7-2.1.4

---

Abudinka said:
how do i know if i have performance issues, launcher was a little bit laggy, but i just installed v6 supercharger which solved this too
im only updating without factory restet/full wipe since something like mini cm 7.0 rc (edit: to be more specific i think it was miniCM7-2.0/CM7.1 port) , im not sure, maybe there is some benchmark so i can check if its too slow, or could be faster than now at least. In my opionion its pretty fast already, but maybe i only think it is fast
edit. im using nAa-06 kernel with minicm7-2.1.4
Click to expand...
Click to collapse
greetings friend this is for those who have problems with slow, but if you think your rom is stable so good but stability will mean superchanger unused v6 or other tricks, the perfect rom does not use performance tricks

---

ronaldvalles said:
greetings friend this is for those who have problems with slow, but if you think your rom is stable so good but stability will mean superchanger unused v6 or other tricks, the perfect rom does not use performance tricks
Click to expand...
Click to collapse
as im from germany i don't think i really got your point. As i said im using minicm7 for quite some time, usually overclocked at 710 MHz, which includes undervolting as far as i know. I had stabilty issuses using 729 MHz so i reduced it again and have may 1 crash since than, but i think it was caused by the usb conenction to a friends pc. You mean i should run very fast without v6 supercharger? even when pushing the home button to return to home screen? that was the moment it was a bit laggy.
So all in all i have no stability issues in every day life, im just not sure if my phone runs as fast as it should with this rom. as i said i would like to compare my perfomance in some way (like a video from one of u guys or a benchmark)
i also dont know, if i need a factory wipe when im going to upgrade to 2.1.5 or if i only need it when i get stability issues