English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Forum rules
Speak English, or use Google Translate.
Google Translate :
Hi, Sorry but first of all. Do not speak English.
But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode.
Again I thought it had already been solved, but when you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Edit. Google Translator Post. Sorry. :S
try installing custom recovery?
Thundeg or ClockworkMod (from Rom Manager)? I already had installed from ROM ClockworkMod rootee manager when using GingerBreak, but the problem persisted, trying to thunderg? now I have the ROM 2.3.3 (Romanian) flashed as I said from kdz.
i think u have some problem in hardware....
make sure your phone dont have custom recovery and not rooted
go to lg service center.
juanitomigraña said:
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Click to expand...
Click to collapse
Hi ,writing in simple English as possible for you to understand ..
I had/have this same problem ..meaning the phone when restarted would go into emergency mode ..like always after it being earlier connected to pc.
well after doing all sorts of bells and whistles ,I found out that the culprit is sd-card due to improper partitioning etc.. and just replacing the sd-card solves this highly irritating problem .. Hope this helps ya !
Thanks for your answers. The solution to bring it to technical service is the one used, I have flashed from "kdz" the official ROM from my operator, without root and no custom recovery. Tomorrow I'm taking, how sad is having these problems with a team of good behavior like this. A greeting.
Related
buenas tardes, disculpen si no realice el post en el lugar correcto, pero no encontré otro lugar donde hacerlo, soy de argentina e instale la rom que figura en este post,
"http://forum.xda-developers.com/showthread.php?t=928343" con multitouch, la rom funciono correctamente, el único inconveniente que tengo es que no consigo tomar señal de 3G, hice los cambios de baseband de 54 a 55 y sigo sin tomar señal, tengo un Xperia X10a, quisiera saber si me pueden asesorar de como recuperara o si me pueden recomendar alguna ROM. Muchas gracias.
-------------------------------------------------------------------------------
good afternoon, sorry if you do not post in the right place, but I found another place to do it, I'm from Argentina and install the rom contained in this post, http://forum.xda-developers.com/showthread.php?t=928343 with multitouch, the rom worked correctly, the only problem I have is that it does not take signal 3G baseband changes made 54 to 55 and I still take sign, I have a Xperia X10A, I wonder if I can advise on how to recover or if I can recommend any ROM. Thank you very much. (google translate)
Have you tried updating thru SEUS? it's safer if you want to stick to 2.1 but if you want to upgrade to 2.2ROMS you can find a lot on this forum. The devs here are really great to help you...Just search on
I see that the thread you linked to is the flash tool.
You should be able to update your phone with the SEUS, or PC companion
Which firmware(rom) update did you go with?
Also who is your cell phone carrier?
http://forum.xda-developers.com/showthread.php?t=956342&highlight=gsm
There are a couple threads where others were having the same problem but I can't seem to find them atm.
Thanks for responding. my personal cellular company and perform the steps named in that post, but I still have this problem, one thing I noticed is that if I put the recovery of data from the tool back up and restore the phone connects to something like that is the 3g, just that is symbolized by an H, the only problem is that when you connect with that I consume all data packets that gives me my monthly cell phone company. is firware on the phone to place the X10a_generic_2_1_A_0_435 (google translate)
----------------------------------------------------------------------------
Gracias por responder. mi compania de celular es personal y realice los pasos que nombran en ese post, pero sigo teniendo ese problema, una cosa que note es que si pongo la recuperación de datos desde la herramienta de back up y restore del teléfono se conecta a algo parecido que es el 3g, simplemente que se simboliza con una H, el único problema es que cuando se conecta con eso me consume todos los paquetes de datos que me da mi compania de celular mensualmente. es firware que coloque en el teléfono es el X10a_generic_2_1_A_0_435
if you only want the 2.1 with MT you might as well just stick with SEUS and use the original SE.
Traducido con google traductor: Tengo un gran problema, tengo un brick en mi celular, y estoy tratando de flashear, pero falla, y me di cuenta de porque, es que mi celular se descarga antes de que termine de flashear, por mas que llene la bateria al maximo y empiece el flasheo, se termina la bateria y se cancela el flasheo, de hecho no se si ya se daño mas de que esta, pero ahora no se que hacer, creo que aproximadamente tardara 12 horas, y el telefono solo resiste 5 horas, y no se si haiga una firmware muy liviano como para que se pueda instalar rapidamente, solo quiero que inicie el celular para poder usar el recovery e instalar minicm u otro... helpppppppppp
ENGLISH please !
Sent from my stunning x10mini !
[MINICM 1.0.2 with CWM]
(Any problem ? Feel free to contact me - [email protected] , +919033451101)
He bricked his phone, when he tries to flash the phone is out of battery before it's done so he can't finish the process.
He has charged the battery to the max but still can't do it. Says his battery lasts like 5 hours in the process and he thinks it's supposed to last like 12 hours so it's a lot of time.
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Ok sorry, im a fail:
Translated with google translator: I have a big problem, I have a brick in my cell and I'm trying to flash, but fails, and because I realized is that my cell is discharged before the end of Flash, and more than full the maximum battery and start flashing, the battery ends and cancels the flash, in fact if you are not hurt over this, but I do not know what to do, I think that about takes 12 hours, and phone only stand 5 hours, and do not know if a firmware haiga very light so that it can be installed quickly, I just want to start the cell to use the recovery and install minicm or other ... helpppppppppp
untime said:
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Click to expand...
Click to collapse
Desconecta el cable de poder (es el que va a la bateria en los minis, le quitas la tapa y hay una cosita que se remueve porque el mini la trae interna la bateria y con eso es como si la quitaras) y vuelvelo a cargar, el telefono va a estar de vuelta pronto.
De otro post que te pusieron agarre esto
jodhaniohm97 said:
Does the led of your phone flash the red colour three times? The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour (this means that you're charging your phone )During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Click to expand...
Click to collapse
El led te tu telefono flashea 3 veces en color rojo? El flasheo triple del led rojo es porque la bateria del telefono esta muerta. Entonces conecta tu telefono con el cable usb a la computadora y dejalo ahi por 2 o mas horas (esto significa que estas cargando el telefono). Durante este tiempo el telefono no se va a prender ni vas a poder hacer nada con el. Solo vas a ver el led rojo.
Despues de dos horas de carga desconectalo y corre SEUR y sigue las instrucciones en la pantalla. Yo segui (el que te da el consejo) el procedimiento mencionado y recupere mi mini.
Creo que ya habias visto ese post, igual te lo puse por si acaso y por si la traduccion de google variaba un poco. Ojala se te arregle el mini, suerte.
hello friends i am new in Colombia did not speak English using Google Translate for me to collaborate
Atrix me for almost a month I had only root fulll nothing else but games and at any moment over here when I turn the phone screen pixels the image is distorted and I did the full reset and nothing stays the same I'm die of despair that I can do I can not fallen or anything like that
the equipment is used at & t has 2.3.4 installed ota girgenbread
or any possible solution
hola amigos soy nuevo de Colombia no hablo ingles utiliza el traductor de google para me puedan colaborar
mi atrix desde hace casi un mes lo tenía solamente rooteado nada mas pero con fulll juegos y de un momento a otro para acá cuando giro la pantalla el teléfono se pixeles se distorsiona la imagen ya le hice el full reset y nada sigue igual estoy que me muero de la desesperación que puedo hacer no se me ha caído ni nada de eso
el equipo es de usa at&t tiene la girgenbread 2.3.4 instalada via ota
o alguna solucion posible
Tengo un problema con mi Galaxy s2 le instale una Rom 4.0.4 de la Resurrection Remix funcionaba bien pero se apago y lo encendí pero se quedaba en el simbolo siyah y no podia entrar en recovery le quise instalar por Odin una kernel pero el odin se quedaba en zImage NAND Write Start se llenaba la barra en verde completa y no me daba el Pass para q se reiniciara intento ponerle una Rom ya sea ICS o Ginger se queda el Odin en SBL.bin o tabn se queda en Cache o en Factory le pongo el Pit Y se pega en Set Particion he probado con varias Pc sin Kies y descargando los driver USB y probando varios puertos he igual da los mismos errores mi cell esta sin Firmware no entra en recovery solo en Download No puedo Flashear nada ni Bootloader no se que hacer
I have a problem with my Galaxy s2 can install a Rom 4.0.4 of the Resurrection Remix worked well but was shut down and lit up but remained in the symbol siyah and could not get into recovery you wanted to install a kernel by Odin but Odin remained in NAND Write Start zImage filled the green bar and I did not complete the restart q Pass attempt to put a Rom either ICS or Ginger gets Odin in SBL.bin or tabn stays Factory Cache or you and I put the sticks Pit Set Partition've tried several PC without downloading the driver Kies and testing multi-port USB and I just give the same mistakes my cell is without firmware does not enter recovery only I can not Download Bootloader Flashing anything or not what to do
First off wrong forum. Second what you said makes no sense. You speak spanish? If so explain again in both english and spanish. I will move to Q&A
Spanish
Primero foro incorrecto. Segundo lo que dijistes no hace sentido. Hablas español? Si lo hablas postea lo que te succedio en ingles y español. Voy a mover esto para Q&A
prbassplayer said:
First off wrong forum. Second what you said makes no sense. You speak spanish? If so explain again in both english and spanish. I will move to Q&A
Spanish
Primero foro incorrecto. Segundo lo que dijistes no hace sentido. Hablas español? Si lo hablas postea lo que te succedio en ingles y español. Voy a mover esto para Q&A
Click to expand...
Click to collapse
Disculpen es que soy nuevo ya lo acomode
Tienes que postear en Ingles y Espanol. Las reglas del foro es ingles principal. El celular hace intento de prender? Necesitas usar Odin para ir completamente stock. Verifica que estes coriendo Odin como administrador que estes usando un USB hub de la placa madre y que el cable sea bueno. Tienes que tener cuidado por que si se daña los bootloaders te puede causar un hardbrick si son como los SGS I. Desafortunadamente no te puedo ayudar mas ya que no utilizo un i9100 pero alomejor alguien mas te puede ayuda. Pero por favor postea en ambas idiomas.
You need to post inEnglish and Spanish. Forum rules is use english. Is the phone turning on? You need to ODIN to bone stock. Verify that Odin is running as admin, you are using a MOBO usb hub and the cable you are using is good. Be careful if you mess up the Bootloaders you can hardbrick, assuming its the same as the SGS I. Unfortunately I can't help you past this as I don't own a i9100 but maybe someone else can, but please use both languages
I was going to say that his initial posts was one of the hardest I've ever had to try and read. Surely Spanish still has punctuation?
prbassplayer said:
Tienes que postear en Ingles y Espanol. Las reglas del foro es ingles principal. El celular hace intento de prender? Necesitas usar Odin para ir completamente stock. Verifica que estes coriendo Odin como administrador que estes usando un USB hub de la placa madre y que el cable sea bueno. Tienes que tener cuidado por que si se daña los bootloaders te puede causar un hardbrick si son como los SGS I. Desafortunadamente no te puedo ayudar mas ya que no utilizo un i9100 pero alomejor alguien mas te puede ayuda. Pero por favor postea en ambas idiomas.
You need to post inEnglish and Spanish. Forum rules is use english. Is the phone turning on? You need to ODIN to bone stock. Verify that Odin is running as admin, you are using a MOBO usb hub and the cable you are using is good. Be careful if you mess up the Bootloaders you can hardbrick, assuming its the same as the SGS I. Unfortunately I can't help you past this as I don't own a i9100 but maybe someone else can, but please use both languages
Click to expand...
Click to collapse
Lo he intentado con cables diferentes y en diferentes Computadoras Y los errores son los mismos Se queda en Sbl.bin o en Cache o en Factory : Llorando:
I've tried different cables and different computers and the errors are the same or be left in Sbl.bin Cache or Factory : Llorando:
Good morning, the problem is this, buy an atrix but someone told me to light it q q always activate the cell with the CPU AWAKE program, I said that assuming q uninstalling it would no longer be necessary, but which my shock when I restart the factory, starting all add my account, etc, the program disappeared and I and all ok, but when I lock the phone and then not q awake and I have to remove the battery and put it to put it on automatically, I then download the application q q again to suspend the phone fails, what solution is there for this or will I have to always use this program.
this is google translator, I speak Spanish.
Thanks for your attention.
Greetings.
add spanish version too, i cant understand anything, ill translate it for you so everyone can understand your problem
pon tu pregunta en español también , no se entiende nada, yo te traduzco para que todos entiendan tu problema
Sent from the gray stuff inside my skull
Buenos dias, el problema es el siguiente, le compre un atrix a una persona pero el me dijo q siempre q lo encendiera activara el celular con el programa CPU AWAKE, esta le dije yo suponiendo q desinstalandolo ya no iba a ser necesario hacerlo, pero cual es mi susto cuando lo reinicie de fabrica, el inicio todo agregue mi cuenta, etc, el programa desaparecio y dije ya todo ok, pero cuando yo bloqueo el celular ya despues no despierta y tengo q quitar la bateria y ponerla al ponerla enciende automaticamente, entonces tuve q bajar la aplicacion nuevamente para q el celular no se suspendiera, que solucion hay para esto o voy a tener que usar siempre este programa.
GingerBread 2.3.6
4.5.145.mb860.att.en.us
Gracias por la traduccion.
cmahate said:
Buenos dias, el problema es el siguiente, le compre un atrix a una persona pero el me dijo q siempre q lo encendiera activara el celular con el programa CPU AWAKE, esta le dije yo suponiendo q desinstalandolo ya no iba a ser necesario hacerlo, pero cual es mi susto cuando lo reinicie de fabrica, el inicio todo agregue mi cuenta, etc, el programa desaparecio y dije ya todo ok, pero cuando yo bloqueo el celular ya despues no despierta y tengo q quitar la bateria y ponerla al ponerla enciende automaticamente, entonces tuve q bajar la aplicacion nuevamente para q el celular no se suspendiera, que solucion hay para esto o voy a tener que usar siempre este programa.
GingerBread 2.3.6
4.5.145.mb860.att.en.us
Gracias por la traduccion.
Click to expand...
Click to collapse
Translation:
Good morning , i bought an used atrix from a person who states that i must turn on the device by using cpu awake app, I've said it's ok, in order to uninstalled that app i have made a factory reset , managed to set up accounts etc. , now screen wont turn on by any means other than battery pull , I've downloaded cpu awake again so i can turn screen on normally, what can i do in order to not use that app again?
gingerbread 2.3.6
4.5.145.mb860.att.en.us
did you disable its functions inside cpu awake's menu?
try normal uninstall
will d/l and see what's inside
can you provide a link for that app?
also what settings do you use ?
last, is your bootloader's phone unlocked ? maybe a custom rom would do the trick
Sent from the gray stuff inside my skull
Sounds to me your phone has the well-known SOD problem and that app's job is to prevent the phone from going into deep sleep so you are able to use the phone seemingly normally at the expense of some battery life.