[Q] Verizon OTA update from Nov. 2011 - Thunderbolt Q&A, Help & Troubleshooting

My Thunderbolt received an OTA update last week and keeps rebooting. I have ClockworkMod Recovery so the Install fails. I cleared the Cache with CWM and restarted the phone like it suggests in other posts elsewhere. I get a failed update message, I cancel out of it and reboot the phone. I also used Titanium Backup to Freeze "Update" and "Updater", but the phone keeps self booting into the OTA update every day . I searched for an update.zip and cannot find one on the SD card.
Can anyone suggest how to stop the phone from updating/rebooting everyday? I cannot seems to find the answer anywhere.
Thanks and I wish everyone a safe holiday!
DD

Just to confirm, are you rooted but on the stock rom? If so, you should be able to find some threads to go on from searching, but here are a couple where people got the update install while rooted:
http://forum.xda-developers.com/showthread.php?t=1330325
http://forum.xda-developers.com/showthread.php?t=1324682

Sorry I forgot to mention it
Yes, I'm rooted, I'll check out the links.

more than likely you wont have an update.zip but rather an RUU. Remove the RUU from the SD card and see how that works. If I was having this problem I would do a full wipe on the phone backup my full SD card contents and format the SD card and flash a custom rom with CWM. I never understand what the point of rooting is if you are not going to flash a custom rom. Are you afraid? Worried about bricking? I just don't get it. Put the new MIUI on it. You will be pleased.

I installed Liquid ROM 3.1 and it's working like a charm. I was concerned about the 3G/4G compatability problems that most custom ROMS seem to have.
Using Titanium Backup Pro I backed up all my apps then restored them after installing Liquid ROM and re-setup the desktop and all is well.

bigd5783 said:
I never understand what the point of rooting is if you are not going to flash a custom rom.
Click to expand...
Click to collapse
Really? The ability to fix things like security holes, use ad filters, make complete, easily restorable backups, install a certificate for a private CA, or just have fairly complete control over hardware you've purchased isn't enough?

mike.s said:
Really? The ability to fix things like security holes, use ad filters, make complete, easily restorable backups, install a certificate for a private CA, or just have fairly complete control over hardware you've purchased isn't enough?
Click to expand...
Click to collapse
I was actually broken hearted that I was compelled in install a custom rom to avoid the problems the op has described. Everything "works" in standard rom. When you go custom you get lots of fun new features but you always lose something..... Could be vzw vvm or nfl live or fast gps lock or photo effects in gallery but it seems there is always someting you lose.

recDNA said:
I was actually broken hearted that I was compelled in install a custom rom to avoid the problems the op has described. Everything "works" in standard rom. When you go custom you get lots of fun new features but you always lose something..... Could be vzw vvm or nfl live or fast gps lock or photo effects in gallery but it seems there is always someting you lose.
Click to expand...
Click to collapse
really,cause everything you mentioned has work on soab from the get go.
Sent from my ADR6400L using xda premium

Related

[Q] Thinking of rooting my Thunderbolt. First time rooter questions

Fair warning: I've never rooted a phone before. I've dabbled in ADB with my nook color, but am far from comfortable with it. I installed Honeycomb on the nook color, then decided to just go simple with autonooter.
Now, I'm thinking of rooting my new Thunderbolt. Mostly because I'd like to get rid of all of the bloatware and try to get all of the performance out of my phone as I can get. After having the Droid1 for a couple of years, I do not want to see my phone get laggy like my D1 did.
So here come the beginner questions: once I root the phone, I know I need to get ROM Manager and Titanium Backup. Those apps will let me be able to get back all of my data and preferences, etc once I switch ROMs right?
What else will I need after rooting? Is it a simple process to flash a new ROM?
Can anyone suggest a (mostly) stock ROM that just gets rid of the bloatware and gives the phones performance a boost?
Also, does a rooted phone require a lot of maintenance? For instance, will I have to be updating ROMS often? Also, if an OTA comes out for non-rooted phones, do these updates get worked into the ROMs quickly? I dont want to be without a necessary update, ya know?
Last question: Once I root my phone, should I just cancel the insurance on the phone? Or does "voiding the warranty" only mean that VZW wont fix it for free?
Thanks!
First off, I highly recommend following this rooting method http://forum.xda-developers.com/showthread.php?t=996616 and not using the easy root method. If you have any problems at all, you can log into http://forum.xda-developers.com/showthread.php?t=951190 and get some help. I also highly recommend reading up a bit on ADB, what it is and how it works http://www.xda-developers.com/android/adb-easy-tutorial/
Then...once you get rooted use ROM Manager to flash the clockworkmod recovery. In ROM Manager there's a little fix that everyone's been doing: open ROM Manager, menu>clear download cache, then settings>erase recovery. Then do your backup before you do anything else like flashing another ROM. Use Titanium to backup all your apps. I recommend the paid versions of both since you will be using them a lot.
Added: What I usually do the first time: Root, backup rom, install debloated rom, set everything up like I want it and then backup again. Each time I flash a new ROM, I create a backup of it all set up and with the name so that I can easily switch back and forth. I like change
The basic debloat rom is http://forum.xda-developers.com/showthread.php?t=1000103
It's easy to flash a new ROM, just download the one you want, put it on your sdcard and then use ROM Manager to 'install from sdcard'
You are going to be flashing ROMs left and right because they come out so fast. Each time an update is out, it'll be put into a ROM and released for all of us here so that you stay current. Most OTA updates will remove your root, so I wouldn't suggest applying them. Many ROMs will block the OTA updates, but not all of them do; at least in my experience.
I would not recommend getting rid of your insurance, it is different than the warranty and you can get your phone replaced if it's ever damaged. I've used it 3 times now all on rooted phones. It indeed will void the warranty.
Happy rooting!
^ +1. I did use the easy root method and had no problems with it but it is truly still hit or miss. I am sure it will get better as more developers start pushing new stuff out.
Good luck
Thanks for the reply!
Why dont you recommend using the easy root method that I've been reading so much about? I realize it has some faults, but I'm planning on waiting until an updated version comes out. I'm a bit afraid to brick my phone while trying to root the phone myself.
Also, after rooting, how can i do a backup of my apps? Doesnt rooting wipe all of the data on my phone?
Learning ADB would be helpful...I must admit, I am an easy root junkie. I just don't have the time to learn ADB. Maybe someday that will change.
Rooting will wipe your phone and I use Titanium Backup to back up my apps. It does make it a lot easier once you start flashing ROMs on a daily basis
Because the non-easy method doesn't have any flaws, thus has a lot less chance of bricking your phone. If you copy and paste, then you reduce your chance to brick to practically 0.
-Gilgamesh- said:
Because the non-easy method doesn't have any flaws, thus has a lot less chance of bricking your phone. If you copy and paste, then you reduce your chance to brick to practically 0.
Click to expand...
Click to collapse
Thanks! After watching a video of someone rooting, I think I will be able to do the non-easy method.
-Gilgamesh- said:
Because the non-easy method doesn't have any flaws, thus has a lot less chance of bricking your phone. If you copy and paste, then you reduce your chance to brick to practically 0.
Click to expand...
Click to collapse
This reason as well as you can get instant support in irc.
Zalyia38 said:
This reason as well as you can get instant support in irc.
Click to expand...
Click to collapse
Thanks.
So to answer my previous question: When rooting, I'm still going to lose all of my current information including apps, sms, etc. However, its good to backup my phone before installing the debloated rom.
Is that correct?
Correct - when you root your phone, you're wiping everything except the sdcard, so you need to backup your apps and such.
And we should stop using the term 'not-easy' root ... how about 'less easy', it's not as scary
Another quick question: I downloaded all of the necessary files.
When I try to open up the RUU_Mecha zip file, it tells me that the file is invalid or corrupted.
I've downloaded it twice from different sources and this happened both times.
Any idea why this is the case?
Can anyone point me to where I can get a non-corrupt version?
CorporateGoth said:
Correct - when you root your phone, you're wiping everything except the sdcard, so you need to backup your apps and such.
And we should stop using the term 'not-easy' root ... how about 'less easy', it's not as scary
Click to expand...
Click to collapse
Even better call it the Original Root Method........
pman555 said:
Another quick question: I downloaded all of the necessary files.
When I try to open up the RUU_Mecha zip file, it tells me that the file is invalid or corrupted.
I've downloaded it twice from different sources and this happened both times.
Any idea why this is the case?
Can anyone point me to where I can get a non-corrupt version?
Click to expand...
Click to collapse
you don't open the files. The exploit one is the one you unpackage to your tools directory. The other you will put on your sdcard when told too. you can join #root and get help if you want.
as far as apps, the market 'should' reload all your apps when you wipe data just give it time. Then use titanium to back them all up.
So ADB is basically finding the root copy and paste and run ? .
Capt.D said:
Even better call it the Original Root Method........
Click to expand...
Click to collapse
I like that one
jawonder said:
So ADB is basically finding the root copy and paste and run ? .
Click to expand...
Click to collapse
ADB is learning what you are doing to your phone instead of letting a program do it for you. Copy/paste is just so there are no typos if you don't feel as comfortable typing it all out. I recommend reading up on ADB so that you have a bit of knowledge of what you are doing.
do i need to use the titanium backup before i try and root or after i'm rooted
Irish Whiskey said:
do i need to use the titanium backup before i try and root or after i'm rooted
Click to expand...
Click to collapse
Titanium backup only works after you're rooted.
You can use a program like Mybackup Pro to backup stuff like sms mms, etc.
Sent from my ADR6400L using XDA App
As a first time rooter myself, I ended up doing the original root process. The well written instructions helped me not to feel paranoid and I breezed through the steps. While, I was confident in rooting the phone because of the instructions, I don't feel so confident post root because I don't know how to do many of the elements like flash roms, kernels, apply mods, etc. So my question is, are there any guides for flashing new roms and the steps taken before and after? For instance, let's say I wanted to flash adrynalyne's no bloat rom, and his mod package, how do I go about doing it? Thanks for taking the time to read this.
Zalyia38 said:
Most OTA updates will remove your root, so I wouldn't suggest applying them. Many ROMs will block the OTA updates, but not all of them do; at least in my experience.
Click to expand...
Click to collapse
If I root and remove bloatware manually, will OTA updates occur automatically, or do I have the option of blocking them. Would they re-install all of the bloatware I removed?

[Q] 2013 HTC Droid Eris = Paperweight?

Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
P.S. First post in any forum ever, just a humble android noob searching for knowledge and stable Roms from those who offer, sorry if I have posted this in the wrong place, obviously I have posted at the wrong time! A million thanks in advance to anyone with good news or advice!
DB73 said:
Is there anyone out there who is willing to point me in the right direction for re purposing my retired Eris (RIP 02-12-13)? Hoping it can be a tool for learning (still in A- shape), instead of a paperweight! I have been doing some reading, but downloading is another story, mostly 404s out there now.
Click to expand...
Click to collapse
What is it you are looking for? I have copies of a lot of ROMs.
doogald said:
What is it you are looking for? I have copies of a lot of ROMs.
Click to expand...
Click to collapse
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
DB73 said:
Hello, and thank you, I am happy to here some good news. I am obviously new to this, but I love to try out different OSs and remaster them the way I see fit. I have just not taken the plunge with android. Since I have never installed any, it's hard to say witch ones I would like best. I would take any ROMs I could get. I figure I can experiment and learn with my Eris, then re purpose it for my son to play games, take pictures etc.
P.S. I downloaded the Jcase / Eclipse3 one click root. Is this the method you would recommend for getting su privileges? I would love to hear your preference on an easy and up to date rooting method. My Eris is currently bone stock with official 2.1, and up to date according to it.
Click to expand...
Click to collapse
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
There is another method very well documented here: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html (which also walks you through installing for your first custom ROM.)
I have some ROMs in my Dropbox if you can't find links.
xtrSENSE (stock 2.1 Eris ROM, rooted): https://dl.dropbox.com/u/220420/Eris/xtrSENSE/xtrSENSE5.0.1.zip
Workshed's GSB: https://www.dropbox.com/s/dvpuv4sbwmun43f/GSB.v4.5-final_ODEXED_CM7.2-Eris.zip
CondemnedSoul's CM7.2: https://www.dropbox.com/s/g1irvshpg7u7trr/CCM7_Eris_V24_RIP.zip
The last two are CyanogenMod Gingerbread ROMs. I think that GSB requires that you also flash Google apps in order to get the market. If so, you can get it from CyanogenMod here: http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
(So, if you need to flash gapps, you go into Recovery. Wipe data/factory reset. Flash the ROM. Flash google apps. THEN restart the phone.)
doogald said:
Yes, if you can find the JCase 1-click root, that will root the phone just fine.
Just realized why it wouldn't let me post, because of the links in my reply, :silly:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
4. Is there any way to get google play instead of market working on the Eris?
(((Thanks again for everything)))
XML Parsing Error: unexpected parser state
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.ja!/chrome/toolkit/content/global/netError.xhtml
Line Number 308, Column 50:
Click to expand...
Click to collapse
DB73 said:
Thank You, I downloaded the ROMs. The link for gapps is dead though. Was that just needed for Workshed's GSB or also for CM7.2?
Click to expand...
Click to collapse
Try this one: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
CondemnedSoul's includes the Google apps already and does not require a separate flash of the gapps zip file.
Ok, I just checked: GSB does NOT require google apps, either; they are already included. You can ignore that step.
I have a few questions to throw out there:
1. I was thinking about doing another factory reset, my attempt to have a clean recovery. What will non-activation after boot with no service do?
Click to expand...
Click to collapse
Oh, good question. I would avoid it if you can. The Eris will insist that you activate. However, if you follow the prompt to activate and then press the disconnect button as soon as you hear it ring, it will try activation again two more times. If you disconnect after hearing the ring those two times as well, the phone will give up on activation and allow to continue with setup.
2. Does vanilla = fast, lightweight, performance, more partition space for user? If so, do you have any recommendation / or a link?
Click to expand...
Click to collapse
Not necessarily. In my experience, xtrSENSE is fastest, but the GB ROMs are just fine. You may not notice the difference. However, xtrSENSE has a method called cache2cache that frees up more storage space or user applications and data. If you install a lot of apps, xtrSENSE may give you more space.
That said, there are disadvantages, including missing out on apps that do not run on android 2.1.
There is something called xtrcache2cache that you can flash on the GB ROMs to give you the same sort of space. I'll try to find a link.w
3. Rumored Jellybean for the Eris, love to find the latest build, is it still available? Links point here (XDA) but no download.
Click to expand...
Click to collapse
I've never tried it, and I can't believe it runs with any sort of decent performance anyway.
4. Is there any way to get google play instead of market working on the Eris?
Click to expand...
Click to collapse
Not on android 2.1, but the two gingerbread ROMs will update the market to the play store.
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
The download link there seems to work.
Copy that file (xtrCMCache2cache.zip) to your SD card. This is only for the Gingerbread ROMs - it's not necessary for xtrSENSE.
Restart the phone to recovery. If you have already flashed one of those ROMs, simply flash that xtrCMCache2cache.zip file - do not wipe data or Dalvik cache first. Restart the phone, and you'll have probably about 20-30 MB more free storage space for apps and data.
If you have not already flashed GSB or CondemnedSoul's, do this:
- restart in Recovery
- wipe menu
- wipe data/factory reset
- main menu
- flash a zip file, and choose GSB or Condemned
- flash a zip file, and choose xtrCMCache2cache.zip
- restart the phone
doogald said:
xtrcache2cache is here: http://forum.xda-developers.com/showthread.php?t=924562
OK, I will read what I have gathered one or two more times before taking the plunge. I am thinking of using the Jcase method, it seems pretty much idiot proof. I have the file and ROMs stored on my PC, and now on a CD as well, just so I don't loose them. If I have this right, I will:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think! On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options. I guess the latter is best, and use only a custom ROM for my son to play with. Hopefully I can temporarily disable or somehow limit su before giving it too him.
4. Do Nand backup of original official image, and put somewhere safe, like 2 places + on CD then remove from SD for more available space.
5. Flash one of the 3 downloaded ROMs and also xtrCMCache2cache if desired to desire-c
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Edit # 2 I downloaded a MD5 calculator and this is the output (F34FECFFB985553B68D66F6AC1EF27D3) for the erisone010.apk file
Another big thank you Doogald, If I have something wrong here, please, feel free to beat it into me now, before I do something stupid!
Click to expand...
Click to collapse
DB73 said:
Pre-Steps:
Copy the Jcase one click root file to an empty SD card, install a file explorer app capable of launching it, take a deep breath, here we go Or maybe I have to copy to android filesystem first?
Click to expand...
Click to collapse
No, Your regular SD card is fine. You do need to enable third-party app installs; you'll find that setting in settings->applications.
1. Execute Jcase's one click, and after reboot, I should have the Amon Ra recovery. This is simple, but also the most dangerous part? If this were to fail, it would be similar to a bad BIOS flash. This would brick the phone, if I am understanding this correctly.
Click to expand...
Click to collapse
Yes. You must restart the phone as if you wanted to make a phone call. Many people get too eager and try to get into Recovery before full restarting.
I can't believe that flashing Amon_RA is all terribly dangerous. There are ways to recover. In fact, I have not seen anybody report a brick after running the JCase 1-click. I'm sure that it will be fine.
2. Then Use the recovery to flash rootme.zip now located on SDCard. Going to use a 2 Gb card from my old LG 8350 (phone before Eris).
3. Do Nand backup of semi clean stock OS. By doing so I will loose the stock recovery for good, meaning no more resets to OG clean?
Click to expand...
Click to collapse
You *could* do the Nand Backup before running rootme.zip. Actually, you only really need to run rootme.zip if you want to do something with root with the stock Android you have now. Some people may, for example, install the application Titanium Backup Pro (which requires root) and batch backup all user apps (menu->batch and choose to run that option from the list) and then, after installing a new custom ROM, reinstall Titanium from the market/play store and then batch restore all missing apps and data. It's a very powerful way to get the phone running all of your apps and data without reinstalling from scratch.
That brings up one more thing: if you decide to install xtrSENSE, you do not need to do a factory reset if you want to keep all of your apps and data. Of course, if you want a fresh start you may, but xtrSENSE will keep all of your apps and data and give you a faster Eris with more room for apps and data.
Also, it *is* possible to get stock recovery back, though not without losing all of you data. There is a ROM called Flashback_21v2 that will bring back stock recovery and an unrooted Eris if you wish. The phone will act as if it was never rooted. You can find it here: http://forum.xda-developers.com/showthread.php?t=792026
That would be a good thing to keep on your phone, just in case. (Though I have to say that I am hosting the location of those files on my website and I have no plans to stop doing so, so they should be around for a while...) You'll probably be fine with the "no radio" version, but if you can spare the space on your computer, (that's a bit of a joke; the files are small), I'd download both.
3.5? On second thought, doing one last reset first would remove all user data with my name and credentials. It may be wise to do this, as it will eventually be in the hands of a 5 year old. This would prevent accidental purchases, I think!
Click to expand...
Click to collapse
In that case, you DEFINITELY want to wipe data, even with xtrSENSE!
On the other hand, if I ever break or loose my new phone and need a temp phone, I could keep this image (as is) to use temporarily with Verison until I get a replacement! I can only choose one of these options.
Click to expand...
Click to collapse
No, you can do both. Do a Nand Backup of the phone after you root it, which will be stored on the SD card. Wipe data/factory reset and you can installa ROM and then always go back into recover and Nand restore what you backed up originally to get your phone back as it was when you ran the backup. Familiar with Norton Ghost for Windows PCs? That's what Nand backup and restore does - it takes a full snapshot of your phone as it is, and when you restore, it's as if you had just turned off your phone for a long time - it's back to the way it was at the time you made the backup. You can have multiple backups stored - as many as will fit on the SD card.
6. I assume that appstoSD is something I would need to download now, then add after previous steps, if I feel the need!
Click to expand...
Click to collapse
Well... xtrSENSE support apps2sd as it is, and there are scripts to turn that functionality on. The GB ROMs support using the Android-native moving of apps to sd, so I would avoid apps2sd for them.
7. Then its off to test land! I hope I understand this correctly. The one step I have missed is definitely very important. I did not verify the MD5 on Jcase's one click. In fact I don't even remember where I downloaded it from. Truth being told, I have never manually done a MD5 verification! I guess I have one more step that I absolutely need to learn as it is much more important in Android, especially for recovery!
Edit: I have re downloaded the file from here (XDA), did not see a sum to compare it to? I hope the file still is OK!
Click to expand...
Click to collapse
The MD5 I have for 1click is f34fecffb985553b68d66f6ac1ef27d3
HOWEVER, can I suggest instead that you use the 1-click root here, prepared by Scary Alien: http://androidforums.com/eris-all-t...2-custom-recovery-trackball-not-required.html
If you look at the bottom of the first post, "Scenario 5", there is another version of 1click with a better version of Amon_RA (that allows you to use the hardware keys to navigate recovery, rather than just the trackball; sometimes the trackball doesn't work in the original Amon_RA). That version I guarantee is safe, and Scary Alien has the MD5 right there.
I am guessing multi-quote is what I should have tried on this instead of deleting?
OK, running 1 click directly from from SD card. Third-party apps ticked on before hand, check.
After running 1 click, do normal restart, then shutdown, then go into recovery via vol / end start up.
No bricks reported, that is very good news. Also good to hear that there may be a procedure for un-bricking in the unlikely event!
My Eris already has already has all apps removed, I tried to make it as clean and small as possible. Just looked at the xtrSENSE page and copied some tips, sounds nice and fast, liking that!
Awesome, I downloaded all 3 including Cupcake, in case I want to remember what that was like.
I did exactly that, downloaded both.
I will give this some extra thought before giving it to my son.
I have never used Norton Ghost, but I have used Macrium Reflect, Seagate Disk Wizard, Acronis etc. I get the image/snapshot thing. I plan to store backups in other locations, then copy back to SD if and when needed.
Just did some reading on the xtrSENSE page about aps2sd, guess I will do some more reading about native moving of apps to sd soon.
The MD5 I have matches yours. I downloaded MD5 Calculator and I guess it works.
After reading the page including "Scenario 5" I absolutely agree. I downloaded it, and will use the "scary alien" modded version with the added functionality. Thank you very much for pointing this out. Looks like no change in the simple execution besides the app/file to run, very nice!
Doogald, I can clearly see that you go out of your way to help others to say the least, I am sure its appreciated by more than just me, Thanks!
DB73 said:
I will give this some extra thought before giving it to my son.
Click to expand...
Click to collapse
Hey, one other thing: CondemnedSoul posted a script that you can run that disables the mobile radio, so you can make the device WiFi only. It's here: http://forum.xda-developers.com/showthread.php?t=1216571
I have to say that I have never tried it, but it seems from the replies in that thread that many have, successfully.
Jelly Bean build anyone?
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
foodude1 said:
This may be redundant, but does anyone have a copy of the eris jelly bean rom laying around? Just found my old rooted eris with cyanogenmod and I would like to try jelly bean or ICS.
Click to expand...
Click to collapse
Of course it isn't redundant, in fact this maintains the forum active, well a bit.
Here is the Jellybean Rom you requested, it is from MongooseHelix's build. It has a different Gapps package from what MongooseHelix actually established but I assume no issues may occur. :highfive:
https://copy.com/TgfFHxTqOHPJ

[Q] Samsung Fascinate Root without losing data?

Is it possible to root the Fascinate without deleting data, or at least a temporary root?
Chase716 said:
Is it possible to root the Fascinate without deleting data, or at least a temporary root?
Click to expand...
Click to collapse
Absolutely. You'd have to search/dig through older posts, but the general idea is this:
> Get a recovery .zip file that will install Superuser and put it onto the SDCARD
> Flash a custom recovery (typically ClockworkMod) using ODIN
> Reboot into recovery and install the .zip file
Basically for the Fascinate, all you really need to do is get the proper version of the Superuser application and it's corresponding su binary installed. The Samsung ODIN tool allows you to replace the stock recovery with a custom one, and that custom recovery will allow you to install Superuser/root the device. This only modifies the SYSTEM volume and does not affect any of your data at all. It's obviously more complicated, but essentially behaves as if you could just root by installing something from the Google Play Store.
There should be a TON of resources/threads out here and on other sites with how to actually accomplish this and provide the necessary files for the Fascinate, but as long as you pick a process that generally has the steps listed above, your data *should* be 100% safe.
... so get Googling and root that thing! lol :victory:
djp952 said:
Absolutely. You'd have to search/dig through older posts, but the general idea is this:
> Get a recovery .zip file that will install Superuser and put it onto the SDCARD
> Flash a custom recovery (typically ClockworkMod) using ODIN
> Reboot into recovery and install the .zip file
Basically for the Fascinate, all you really need to do is get the proper version of the Superuser application and it's corresponding su binary installed. The Samsung ODIN tool allows you to replace the stock recovery with a custom one, and that custom recovery will allow you to install Superuser/root the device. This only modifies the SYSTEM volume and does not affect any of your data at all. It's obviously more complicated, but essentially behaves as if you could just root by installing something from the Google Play Store.
There should be a TON of resources/threads out here and on other sites with how to actually accomplish this and provide the necessary files for the Fascinate, but as long as you pick a process that generally has the steps listed above, your data *should* be 100% safe.
... so get Googling and root that thing! lol :victory:
Click to expand...
Click to collapse
Well the only thing is, that I'm not supposed to root it, and I only want a temporary root to remove bloatware. Superoneclick's shell root didn't work, and neither did z4root.
Chase716 said:
Well the only thing is, that I'm not supposed to root it, and I only want a temporary root to remove bloatware. Superoneclick's shell root didn't work, and neither did z4root.
Click to expand...
Click to collapse
Well if you get more interested I suggest you try a 4.2.2 ROM you won't be disappointed
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Well if you get more interested I suggest you try a 4.2.2 ROM you won't be disappointed
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Well that does sound really nice, especially since i enjoyed CyanogenMod on my Incredible 2, but I can not flash any ROMs, I cannot completely root, and I cannot even flash a new recovery. And if I did flash a ROM, I think it would have to be manually activated since it does not have a SIM Card, leading him to find out I rooted. I just want a temp root to remove the bloatware I do not use.
Chase716 said:
Well that does sound really nice, especially since i enjoyed CyanogenMod on my Incredible 2, but I can not flash any ROMs, I cannot completely root, and I cannot even flash a new recovery. And if I did flash a ROM, I think it would have to be manually activated since it does not have a SIM Card, leading him to find out I rooted. I just want a temp root to remove the bloatware I do not use.
Click to expand...
Click to collapse
I don't think there are any temp-root solutions out there for the Gingerbread Fascinate, as the community was well beyond using exploits by that time Could be wrong, but I looked around and didn't really find anything. It might be worth looking around for a generic Linux 2.6.35-based exploit that somebody has compiled for the ARM processor.
Question ... what would prevent you from temporarily flashing a custom recovery to make the edits you want? If you don't change anything else, it would be overwritten with the stock recovery on the next boot, thus covering your tracks (and we can get the stock recovery back on there for ya if for some reason it doesn't). Many (most?) recoveries will allow ADB access when active, so you can mount system and do what you need to do without actually rooting the stock ROM.
Also, don't worry too much about the CDMA activation status, unless you check a certain box in the Samsung ODIN tool there is almost no way to screw that information up doing what you're looking to do. The CDMA keys are stored in a super double secret location that you ordinarily can't get to. The option is called "EFS Clear", don't go anywhere near it.
If you do find a solution that fits your needs, I also recommend you have a plan to restore the SYSTEM volume back to stock in case you make a mistake, like deleting a critical file. We can help with that as well if you are ultimately willing to use the ODIN tool. I just want to make sure you're prepared for that possibility as it sounds like if you temporarily break this device you'll be in big trouble
djp952 said:
If you do find a solution that fits your needs, I also recommend you have a plan to restore the SYSTEM volume back to stock in case you make a mistake, like deleting a critical file. We can help with that as well if you are ultimately willing to use the ODIN tool. I just want to make sure you're prepared for that possibility as it sounds like if you temporarily break this device you'll be in big trouble
Click to expand...
Click to collapse
Yeah, but two more things: first, can someone give me a very detailed tutorial on ODIN for my device, and could someone also give me the files i may need in order to delete the bloatware, no flashing, no data wipes or anything like that? Because the bloatware is what I think slows my phone down. And what if something does not go right?
Sent from my Galaxy S Fascinate SCH-I500
You should be able to unroot via SuperOneClick after you've fully rooted and debloated the thing. Whoever's keeping an eye on that Fassy hopefully won't notice!
Chase716 said:
Yeah, but two more things: first, can someone give me a very detailed tutorial on ODIN for my device, and could someone also give me the files i may need in order to delete the bloatware, no flashing, no data wipes or anything like that? Because the bloatware is what I think slows my phone down. And what if something does not go right?
Sent from my Galaxy S Fascinate SCH-I500
Click to expand...
Click to collapse
Does the person you're hiding this from even know the difference between what GB and JB looks like? What's to say if you have an AOSP or CM-based JB rom that they'd even know it's not stock?
Anyway, if you buy Nova Launcher prime I know you can hide apps from your drawer, so if you wanted to say hide TiBu or Superuser you could do that and throw someone off if they're just taking a quick look at your app drawer. Nova doesn't work on GB though I think, so you might have to look for a different launcher to do that if you want to stay on stock.
For a detailed guide on pretty much anything related to rooting/flashing just check droidstyle's guide here: http://forum.xda-developers.com/showthread.php?t=1238070
For freezing or removing bloat I highly recommend buying Titanium Backup, but there are some free apps that will do that sorta stuff. Titanium will give you way more options down the road though...
Crawshayi said:
Anyway, if you buy Nova Launcher prime I know you can hide apps from your drawer, so if you wanted to say hide TiBu or Superuser you could do that and throw someone off if they're just taking a quick look at your app drawer. Nova doesn't work on GB though I think, so you might have to look for a different launcher to do that if you want to stay on stock.
Click to expand...
Click to collapse
I believe he does, since when I rooted my Incredible 2 he noticed it was completely different and not HTC Sense skinned, and I'd explained to him the Android operating system. And I use ADW EX as my default launcher, only because I can't use the TwLauncher due to lag issues. So I've hidden my bloat apps, but things still stay open in the background.
This might be a long shot, but have you ever tried to explain to him that rooting is actually more secure than having an unrooted phone? Try to get him to understand that with a rooted device you can actually make FULL backups of your device in case anything goes wrong, unlike the half-assed backups that non-rooted devices have to use. Also, rooted devices allow you to install the latest (secure) versions of android unlike non-rooted which force you to wait for updates that may never come.
Anyway, if that fails, I would recommend to root and freeze/remove with Titanium
Crawshayi said:
This might be a long shot, but have you ever tried to explain to him that rooting is actually more secure than having an unrooted phone? Try to get him to understand that with a rooted device you can actually make FULL backups of your device in case anything goes wrong, unlike the half-assed backups that non-rooted devices have to use. Also, rooted devices allow you to install the latest (secure) versions of android unlike non-rooted which force you to wait for updates that may never come.
Anyway, if that fails, I would recommend to root and freeze/remove with Titanium
Click to expand...
Click to collapse
I wish. He won't listen, and he'll just say that it's bad, I don't need to root my phone,and that I'll break it, like my old one ( NOT MY FAULT!). That is why I wanted to do it secretly, temporarily, or something like that. I know it's good, and that there are risks. So is there any way I can root (no flashing) and keep it hidden? Also, I went into the bootloader, and saw an option that said update.zip. Would that be useful, to maybe flash the EH09 Fascinate rom?
UPDATE: Thanks for the help everyone, but I'm most likely going to ditch the Fascinate for a Galaxy SIII. So maybe sometime I'll find the time to experiment with ROMS on my Fascinate sometime.

[Q] First time installing custom ROM on S4 - Thoughts & Questions

Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
opethfan89 said:
Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
Click to expand...
Click to collapse
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Mightycaptain said:
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
opethfan89 said:
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
Click to expand...
Click to collapse
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
opethfan89 said:
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
Click to expand...
Click to collapse
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Mighty, just wanted to report that flashing TWRP 2.5.0.2 from within ROM Toolbox Pro worked like a charm. I'm on TWRP as we speak.
Thank you so much for your responses. If anyone else has anything to add, or a different response to my questions, please do so! In the meantime, I'm going to try to figure out how to get my nandroid backup working...
Cheers!
*EDIT* Made a backup with TWRP (whose interface is bloody phenomenal, btw), flashed CWM and its working like a charm!! Going to try the st0ckdr0id one as well. Still working on getting that nandroid working so I can recover my stuff and get to customizing!

UMI X2 1.5 Ghz not receiving text messages

Good evening.
I have a new UMI X2 for 3 weeks now. I do not receive texte messages. I have done 2 factory resets and then I get messages back to work, but after a few days and without any reason I stop receiving them again. I did some research and found that this is a common problem with umi x2 and some people say that I should apply a ROM fix or software update. But I dont know anything about this. I need your help in order to fix this please.
JonhyRico said:
Good evening.
I have a new UMI X2 for 3 weeks now. I do not receive texte messages. I have done 2 factory resets and then I get messages back to work, but after a few days and without any reason I stop receiving them again. I did some research and found that this is a common problem with umi x2 and some people say that I should apply a ROM fix or software update. But I dont know anything about this. I need your help in order to fix this please.
Click to expand...
Click to collapse
Have you tried just using a different text messaging app to see if it's not just an issue with the built in stock text messaging app? That would be quick and easy to test. If that doesn't work, then yes. an update or rom would be the next step.
Root: Supposedly this phone is already pre-rooted. Depending on where you got it from, it is possible this was disabled. If it does need to be rooted, then it is specific to what firmware and chip you have (I guess there are regular and "Turbo" versions)
Recovery: http://forum.xda-developers.com/showthread.php?t=2342943
Roms: http://www.needrom.com/phone-roms/umi/umi-x2/ - My suggestion would be CM11 due to a much better UI, more privacy / security, and it is highly rated. Recommend reading through comments for more info on what does / does not work.
All of these are very general guidelines to get started with reading. You should get familiar with how to restore to stock as well, in worst case scenarios.
https://www.facebook.com/pages/Umi-X2-1080p-Android-Phone-User-Group/572387056135889
Thank you so much for your help.
es0tericcha0s said:
Have you tried just using a different text messaging app to see if it's not just an issue with the built in stock text messaging app? That would be quick and easy to test. If that doesn't work, then yes. an update or rom would be the next step.
Click to expand...
Click to collapse
Yes. Did not work.
es0tericcha0s said:
Root: Supposedly this phone is already pre-rooted. Depending on where you got it from, it is possible this was disabled. If it does need to be rooted, then it is specific to what firmware and chip you have (I guess there are regular and "Turbo" versions)
Click to expand...
Click to collapse
Sorry, but I do not understand this part. I am totally illiterate in this matters, but I am pretty good at following tutorials.
Mine is the 1.5Ghz 2Gb RAM and 32Gb ROM (many call it Turbo, even though there have been other Turbo versions before).
es0tericcha0s said:
Recovery: http://forum.xda-developers.com/showthread.php?t=2342943
Roms: http://www.needrom.com/phone-roms/umi/umi-x2/ - My suggestion would be CM11 due to a much better UI, more privacy / security, and it is highly rated. Recommend reading through comments for more info on what does / does not work.
All of these are very general guidelines to get started with reading. You should get familiar with how to restore to stock as well, in worst case scenarios.
https://www.facebook.com/pages/Umi-X2-1080p-Android-Phone-User-Group/572387056135889
Click to expand...
Click to collapse
All these are great tips. Thanks a lot!
JonhyRico said:
Thank you so much for your help.
Yes. Did not work.
Sorry, but I do not understand this part. I am totally illiterate in this matters, but I am pretty good at following tutorials.
Mine is the 1.5Ghz 2Gb RAM and 32Gb ROM (many call it Turbo, even though there have been other Turbo versions before).
All these are great tips. Thanks a lot!
Click to expand...
Click to collapse
So, yea, seems like it should already be rooted. You can check with a root checker app from the Play Store to verify. If it is, then you can install the MobileUncle app and use that to install the CWM recovery which will allow you to backup your current rom as well as completely wipe and install a new one. Make sure you backup whatever you want and save it to a safe place before you start as a precaution. You can never be too careful, but you can certainly not be careful enough.
es0tericcha0s said:
So, yea, seems like it should already be rooted. You can check with a root checker app from the Play Store to verify. If it is, then you can install the MobileUncle app and use that to install the CWM recovery which will allow you to backup your current rom as well as completely wipe and install a new one. Make sure you backup whatever you want and save it to a safe place before you start as a precaution. You can never be too careful, but you can certainly not be careful enough.
Click to expand...
Click to collapse
Why do you think it is rooted. Is that bad or good?
Will I need a micro SD card to do this?
Because I've seen more than 1 post / review from various users stating that it is rooted already. This is excellent if you plan on modifying your phone as part of the work is already finished. Whether or not you need an SD card depends on how much storage you have left on your phone. Probably need at least a GB or 2 for the nandroid backup and then however much room the roms take up. Since you have a 32 GB phone, it's more than likely there is plenty of room left for this stuff. I really suggest reading up on how to use the Flash Tool and the files you need to restore the phone to stock, just in case. I've worked (rooted/customized) on well over a 100 different kinds of android devices, but even so, I rarely ever work on something that I don't have the ability to at least return it to it's original state.
"1. Downlaod CWM Recovery extract it and copy recovery.img only to root of your SD Cards
{ i.e. sdcard/recovery.img or sdcard2/recovery.img }"
In the beginning of the tutorial it says that. I am completely lost with that step. Is this on the phone or on the pc? Is this through an app?
They're saying you should download the CWM file - if it is zipped, you must unzip and move that file (will be something.img) to your SD card or internal storage. When it says root of card, that just means it should NOT be in a folder.

Categories

Resources