I have a Motorola Atrix from Orange UK. I unlocked the SIM to use it in India, Unlocked the BootLoader and flashed CM7. Now I want to go back to original Motorola ROM. Is it possible, if yes, HOW? Kindly post other links of this procedure if anybody knows about some way to do it.
asifisbest said:
I have a Motorola Atrix from Orange UK. I unlocked the SIM to use it in India, Unlocked the BootLoader and flashed CM7. Now I want to go back to original Motorola ROM. Is it possible, if yes, HOW? Kindly post other links of this procedure if anybody knows about some way to do it.
Click to expand...
Click to collapse
Look in the stickies section of Atrix development forum. And find the sbf for unlocked bootloader. Or if u just want the blur UI try the Aura Rom. It has a lot of mods but the theme is basically stock.
Sent from my MB860 using Tapatalk
asifisbest said:
I have a Motorola Atrix from Orange UK. I unlocked the SIM to use it in India, Unlocked the BootLoader and flashed CM7. Now I want to go back to original Motorola ROM. Is it possible, if yes, HOW? Kindly post other links of this procedure if anybody knows about some way to do it.
Click to expand...
Click to collapse
And no matter what do not downgrade to any Froyo build/sbf. U will brick.
Sent from my MB860 using Tapatalk
I'm also having problems but mines T-Mobile UK instead of orange UK I understand not to downgrade but we can't get 2.3.4 in the UK yet so ours are on. 2.2.2 so if I flash the stock rom it wont brick or would it this is what's bugging me as I dnt wanna brick
Sent from my MB860 using xda premium
You will never get brick by flashing/restoring through recovery.
Sent from my MB860 using xda premium
hey, I think i have the same problem, i have an atrix with cyanogenmod-7-12112011-nightly-olympus, Android version 2.3.7
And i would like to know if its posible to get the original settings if I back up another atrix from the same carrier (telcel - MExico), so i can get rid of the cyanogen and i can have it with factory settings.
If its posible, can anyone help me and tell me how to do it?
thank you very much
rodra said:
hey, I think i have the same problem, i have an atrix with cyanogenmod-7-12112011-nightly-olympus, Android version 2.3.7
And i would like to know if its posible to get the original settings if I back up another atrix from the same carrier (telcel - MExico), so i can get rid of the cyanogen and i can have it with factory settings.
If its posible, can anyone help me and tell me how to do it?
thank you very much
Click to expand...
Click to collapse
Flash a fruit cake through recovery
Sent from my MB860 using xda premium
how can i do that? sorry im new in this and i wabt to learn
Sent from my MB860 using XDA App
Fruitcakes:
http://forum.xda-developers.com/showthread.php?t=1163009
Is there an active mirror for the fruitcakes anywhere?
Sent from my MB860 using xda premium
how can i downgrade from 2.3.7 cyanogen? or how can i use webtop?
Sent from my MB860 using XDA App
Related
Hi, i have the screen always on motorola logo... this is a hard brick? I can put right my phone?
TY
No your just stuck in a boot loop. If you have cwm you can try a factory reset, or flash an sbf if your on an att atrix. Not sure if there is an sbf for other versions.
Sent from my MB860 using Tapatalk
ty for the fast reply... i have an att phone. How i can flash an sbf?
ty...
http://forum.xda-developers.com/showthread.php?t=991072
Do not do it if you flashed the 2.3.4 update or you will have a hard brick. I would recommend starting from 1.2.6 so you can root.
Sent from my MB860 using Tapatalk
i have this problem after the installation of
[ROM] AT&T 4.5.91 ★ Gingerbread 2.3.4 ★ Beta #4
If you flashed kenns rom you should be ok flashing an sbf I think it would only brick if you used the other method. If you can get into recovery I would recommend just flashing kenns rom again though should fix it
Sent from my MB860 using Tapatalk
ok, tomorrow i wonna try... ty. now im going to go...
ty
I had that problem I realized it wasn't working because I downloaded the wrong cwm... I had an older version make sure u get the one by the screen shot that says 6/30 or it'll brick. No it isn't hard brick what I did was flash hktw with moto-fastboot and from there I installed gingerbread beta 4 and its flawless it took a lot of help from xda team but I love it I thought id extend my help
Sent from my MB860 using XDA Premium App
hi, with rsdlite i have flashed 1.2.6 and the phone now works! now i must flash this? OLYFR_U4_1.5.2_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
ty!
frankiedizzle87 said:
I had that problem I realized it wasn't working because I downloaded the wrong cwm... I had an older version make sure u get the one by the screen shot that says 6/30 or it'll brick. No it isn't hard brick what I did was flash hktw with moto-fastboot and from there I installed gingerbread beta 4 and its flawless it took a lot of help from xda team but I love it I thought id extend my help
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
sorry, but where is this screenshot?
ty
system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do
I am new to flashing and unlocking, i have a bell atrix that is rooted and it seems i cannot install custom roms/themes i accidentally installed cwm without unlocking bootloader, so i dont know what i should do, i really want the new cm7 rom because i saw there was a beta for the atrix, anyways, i need to know what i can do from this point on please, much appreciated
Unlock the bootloader. Check out IHOP (aka pudding) in the dev section...
Sent from my MB860 using xda premium
I seen it but doesn't it cause ram errors with bell phones?
Sent from my MB860 using XDA App
GeneralLeee14 said:
I seen it but doesn't it cause ram errors with bell phones?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes, it will cause a ram issue.. But it can be patched by flashing a cmw file. I forget what thread its in.. But NFHimself made a cwm flashable file that fixes up the ram issue.
http://forum.xda-developers.com/showthread.php?t=1277370
hello, good morning everyone ... I have a problem .. in my atrix, after fixing the problem of touch buttons, now appeared another problem, so I can listen to active calls the speakerphone, which will be what is happening, can someone help me? thanks of this already ..
Which ROM or Motorola software are you running at the moment?
Are you rooted with an unlocked bootloader? That info will help is solve your problem better.
Sent from my Atrix XDA Premium App
Voelker45 said:
Which ROM or Motorola software are you running at the moment?
Are you rooted with an unlocked bootloader? That info will help is solve your problem better.
Sent from my Atrix XDA Premium App
Click to expand...
Click to collapse
Look, I'm using the rom retail Froyo 2.2, and this unlocked bootloader, if you need more details I will step ... hugs
I recommend you try upgrading to gingerbread by ROM or with motorola software. That could fix your problem. You said you have an unlocked bootloader, but are you rooted?
Sent from my Atrix XDA Premium App
Voelker45 said:
I recommend you try upgrading to gingerbread by ROM or with motorola software. That could fix your problem. You said you have an unlocked bootloader, but are you rooted?
Sent from my Atrix XDA Premium App
Click to expand...
Click to collapse
atrix my rom already had the gingerbread, so I decided to give back to the retail 2.2, but to no avail, I went back again the gingerbread but the problem persists. atrix is rooted my ... what else can I do to fix this problem, I've heard people talking that led to assistance, but to no avail ... help there, please ... thanks
Is it possible without hard bricking the phone? The upgrade is causing WAY more trouble than it's worth and a lot happier running roms. Thanks.
Sent from my SAMSUNG-SGH-I727 using XDA App
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Was your bootloader previously unlocked?
Gfrt94yn said:
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
live4nyy said:
Was your bootloader previously unlocked?
Click to expand...
Click to collapse
I can at least keep this alive and going. Mine was previously unlocked, and, once the update applied, which did it overnight without my permission (HNNNGH), I lost it. What do I do now?
Gfrt94yn said:
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Yes /10 char
I think you will find that you just lost the unlock graphic; unlocking involves burning out one of the eFuses, so you can't relock.
Hi everone
Im using a rooted, BT UL Atrix 4G with 2.3.6 4.5.191. and Im wondering if this is possible to perform this downgrade or/to 2.3.4
I want to do that becouse my GPS takes a lot to get a fix and I had no luck with other methods like: changing gpsconfig, recalibrating compass, using different radios
Thanks
Downgrading to 2.3.4 IS POSSIBLE provided you have previously unlocked your bootloader AND you have a backup of 2.3.4 through CWM.
This is treacherous territory, and I'm not sure if there's been resolution on whether or not it's safe.
Your safest bet? Fruit cake it back to 4.5.91.
Is it possible to downgrade using RSD if the bootloader was never unlocked?
bloodhawk said:
Is it possible to downgrade using RSD if the bootloader was never unlocked?
Click to expand...
Click to collapse
Don't do it. You will get failed to boot 2.
MB860, CM7.2.0, Faux 026b1 1Ghz
bloodhawk said:
Is it possible to downgrade using RSD if the bootloader was never unlocked?
Click to expand...
Click to collapse
No that would brick it and you would be screwed. We already saw this issue when people tried to go backwards from GB to Froyo...
Sent from my GT-I9100 using xda premium
I have used the automatic bootloader unlock for 4.5.141 but I may be just lucky
Sent from my MB860 using xda app-developers app
Yeah it is working fine on 4.5.141 ... Unlocked and Rooted, running Neutrino 2.8 GT
But the phone is heating up even @ 1 GHz. (no undervolt)
So was curious if flashing the ROM over 4.5.91 will help or not.
- Is it not possible to downgrade even using Nottach's method? Flashing the 4.5.91 images directly from fastboot and not bothering with RSD ?
NVM...
Sent from my GT-I9100 using xda premium
So is it feasible?
Downgraded successfully by flashing the separate partition using moto-fastboot.
Got the 4.5.91 images from here : http://forum.xda-developers.com/showthread.php?t=1163342
wifi error.....
bloodhawk said:
Downgraded successfully by flashing the separate partition using moto-fastboot.
Got the 4.5.91 images from here : http://forum.xda-developers.com/showthread.php?t=1163342
Click to expand...
Click to collapse
4.5.91 resolves wifi error?
the link is down.