Currently I'm trying this guide:
Nook Tablet "One Click Root" + gapps ADB script
but I've been trying various guides all day. The drivers are there, debugging enabled, auto mount disabled, robot in the bottom corner but when I run ADB Devices, no dice. Anyone have any clues what the problem could be or atleast anyone else having this problem? At first I thought it might be because I was using a different USB cord but it still doesn't work even with the Nook cord
The problem you describe is almost guaranteed to be a problem on your computer and the driver installation.
For the folks here to help, they will need to know platform (PC or mac) and version of operating system.
If Windows, they will need to know how the device appears to Device manager. If it shows up as a disk drive - you will have to disconnect from the Nook side. ADB Composite should be good.
For either platform, confirm that adb_usb.ini is in the right place and modified correctly.
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
You need to have your nook tablet unplugged when you run that then you would see nook tablet in the device manager when you plug it back in.
Indirect said:
No, you're wrong dude above me.
OP: Run this in cmd prompt
Code:
echo 0x2080 > %username%\.android\adb_usb.ini
Click to expand...
Click to collapse
"Cannot find the path specified." But I can locate the file myself in that directory??
I'm running Windows 7 64-bit, device shows up as android phone>androud ADB interface.
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Check, still nothing in ADB, i did restart the server too. To be clear, the .ini file only has the "0x2080" line in it now, nothing else. I'm assuming that's ok because the other stuff was commented out anyway, am I right?
(thanks for your help! )
1) look in device manager now though, you need to install the drivers.
I still see it listed under android phone > android ADB interface and not mass storage or anything like that, you think that's still the problem though?
*Edit*
SUCCESS!! I uninstalled the "Android ADB Interface" and "Android Composite ADB Interface" appeared in its place!!(??) Whatever happened the device show up now. Thanks for the help and keep up the good work Indirect!
Indirect said:
My bad it's
Code:
echo 0x2080 > "%USERPROFILE%\.Android\adb_usb.ini
Click to expand...
Click to collapse
I was having problems seeing the Nook Tablet in adb devices, but this fixed it for me.
I was having the same issue for a bit, restarted my nook and it worked haha.
Sent from my BNTV250 using xda premium
This worked for me. Hopefully it helps.
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.
Now unplug and replug your NT, and you should now see an Android Composite device with the "!" next to it. You should now be able to install the custom drivers described in the other posts.
Essentially it seems windows is trying to "help" you by guessing at the drivers you want to use.
If this doesn't work, you can try to remove ALL android devices using the USBDeview Application that you can find http://www.androidsim.net/2009/08/how-to-1-how-to-install-usb-driver-on.html
I used USBDeview for the removal part just because I had a Kindle fire, HTC device, samsung device, all installed and I think they were fighting a little bit. I now have results from adb devices, and dare I say ROOT!?!?!
Hope this helps some of you!
Good post - Windows Vista especially, and Windows 7 somewhat, really think they know better than the user when it comes to drivers. Especially unsigned drivers in preference to signed ones...
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
tsubus said:
I found that the best way to do this for people with this problem (such as me), is to go in Device Manager, expand the USB Mass Storage Device selection, search for the USB Mass Storage device of your Nook Tablet (easiest way would be to unplug any other external hd, sd card, ... so that there is only one USB Mass Storage device). At this point, right click and update driver and select the folder manually.
Click to expand...
Click to collapse
I just joined the forum to thank you! I spent hours looking for a solution and yours worked!
brices21 said:
While the nook is plugged in (mine showed the 2 "Disk Drives" and 2 Drive Letters under portable devices). Open Device Manager and delete/remove the 2 disk drives called "B&N NOOK Tablet USB Device" (this should also remove the weird drive letters under portable devices). Now go to Control Panel > Advanced System Settings > Hardware Tab > then click "Device Installation Settings". Change this setting to "No, let me choose what to do", and make sure "Never install driver software from Windows Update" is checked below that.!
Click to expand...
Click to collapse
Well I am stumped here, seriously. I can't get rid of the above mentioned 2 instances of "B&N NOOK Tablet USB Device" no matter what I do. Auto mount is off on the device and the device installation setting is already set to "No, let me choose what to do." Yet every time I plug the NT in- the computer kindly tells me it's "ready for use" and those two "B&N NOOK Tablet USB Device" listings are back. At this point I'm not sure I'm ever gonna be able to get the device to show up under ADB. The computer just won't seem to let it.
Any advice anyone might on this would be greatly, greatly appreciated.
maybe try what Indirect did here: http://forum.xda-developers.com/showthread.php?t=1363652
The website is below what I did to completely disable Windows from installing the Nook drivers every time it is plugged in. I also had the "Never install driver software from Windows Update" checked from Brices21's post but the drivers would still install everytime it is plugged in.
xxxx = http - still a noob, can't post links
yyy = www
xxxx://yyy.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
I never actually installed the USB drivers that indirect provided, but "adb devices" still detected the NT when plugged in.
This was my whole process to get "adb devices" to detect the NT:
With the NT plugged in and device manager detecting the 2 Nook devices as drives and 2 Nook devices in "other devices" and with automount disabled and USB debugging enabled
I also ran the runmefirst.bat at some point in time previously, so the necessary files were created already
***** Pulled this from the website above******
* Go to Start–>Search type in gpedit.msc
* Click the file to open the Local Group Policy Editor and show Windows who is in control!!
* You want to go here: Computer Configuration->Administrative Templates->System->Device Installation. Click on the subfolder Device Installation on the left and on the right side you will see the possible restrictions.
* Right Click on Prevent Installation of Devices not described by other policy settings and edit this option, set it on ENABLED.
*************************************
From here the website says to reboot and set the option back to default. I did not reboot or set the option back.
* Going back into device manager, I uninstalled the drivers for the 2 Nook drive devices.
* Unplugged the NT
* Plugged the NT back in
Then I got the B&N NOOK Tablet USB Device with the broken symbol under "Other devices" in Device Manager
* Open cmd and run "abd devices" from the ntroot directory
The service should start and list the NT device as a bunch of numbers.
* From here you can run NookandZergy.bat to root the NT.
After rooting you can set the options in the gpedit.msc back to defaults.
I also tried installing the Indirect provided drivers as the USB mass storage device. Windows then detected the device as an Android ADB Composite device but "adb devices" from cmd prompt would not detect the NT. I ended up removing all of the drivers and repeating my steps to get "adb devices" to detect it again.
Hope this helps! It may not be the best solution but it was a workaround for me to get the NT rooted.
****Update*****
Just got home and tried to install the drivers and it worked this time. I was able to see the NT with "adb devices"
With the gpedit.msc edit intact, I plugged in the NT and Windows detected 2 broken Nook devices under "other devices" and a mass storage device under USB controllers.
* I uninstalled the driver for the mass storage device
* set the gpedit.msc back to "not configured"
* unplugged NT
* made sure debug mode was set and automount disabled
* plugged NT back in
Device manager showed a Mass Storage device under "Other devices"
* Update drivers for that device with the Indirect usb driver
* ran "adb devices" in cmd prompt and NT is detected.
So if there's anything to take away from my post...hopefully you can use the gpedit.msc to completely disable the autoloading of drivers.
Drivers Fixed!
Rooted! Got past driver issues (Android Composite ADB Interface appeared in Device Manager, adb still couldn't detect Nook). Thanks to all who have worked so many hours on this.
Here's what worked for me (using Windows XP 32 bit):
1. make sure "adb_ini" file contains "0x2080" and is located at "%USERPROFILE%\.android"
2. I had to manually edit my "path=" environment variable to include the above location - both in Control Panel->System->Advanced->Environment Variables and in cmd window.
3. carefully followed instructions on proper installation of drivers for "Android Composite ADB Interface". At this point, cmd window use of adb was able to detect Nook (as well as runmefirst.bat).
4. Continued with root process (i.e. NookandZergy.bat)
Hope this helps anyone still having driver issues.
Never had this issue using the trick mac method.
Related
I am new to the Android platform so please excuse any silliness on my part…
Below are the steps I took to successfully allow my Vizio Tablet (VTAB108) to connect via USB using the generic Google ADB driver as Vizio does not include ADB access for the tablet.
History:
I am trying to Root my tablet and from what I read throughout the forum, the easiest steps to root a tablet is using the SuperOneClick method.
Since SuperOneClick requires ADB access and the Vizio does not include the ADB driver (and the generic Google) do not work out of the box I was at a loss to how I would run SuperOne Click.
This article are the steps I took to get ADB access working with Windows 7 x64 and the Vizio Tablet.
I am hoping my steps here can further lead to root access for this tablet.
As an FYI, I was still unsuccessful in getting SuperOneclick to completely run after following these steps, but maybe someone has an alternate method of rooting now that ADB access is available? /me crosses fingers
It would stop at Step #6 at which time I would disconnect and reconnect the tablet. It would contine to step #8 but then finally fail. If anyone has an alternative to SuperOneClick, I would gladly try it.
IMPORTANT:
The instructions below assume you have already put your Tablet into USB debugging mode.
The instructions below assume you are running Windows 7 x64. If you are running x32 versions of your OS, modify the below settings as apporopriate for your OS[/B].
1. Download and install the Google Android SDK.
(Being this is my first post, I cannot post a URL so google the following topic exactly and click the first link):
what-is-adb-and-how-to-install-it-android
2. When you get to the USB driver install you will have to manually modify your android_winusb.inf settings file to allow Windows to recognize your Vizio Tablet using the generic Google ADB-USB driver.
3. Find the "usb_driver" folder in your sdk directory. (Mine was: C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver).
4. Right-click "android_winusb.inf" and open it with notepad or your favorite text editor.
Under the [Google.NTamd64] section, paste the following:
Code:
;Vizio Tablet
%SingleAdbInterface% = USB_Install, USB\VID_0489&PID_E040&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_0489&PID_E040&REV_0227&MI_01
then, open a command prompt and type the following:
Code:
echo 0x489 >> "%USERPROFILE%\.android\adb_usb.ini"
5. Right-Click the unknown device in Windows Device Manager (Under Other devices) and manually install the driver for your Tablet.
NOTE: Originally my tablet connected to the computer and installed the regular Windows 7 Mass Storage driver. I had to remove this driver before I could see the device listed under "Other Devices". Follow these instructions if you need to remove your generic Mass Storage driver:
Code:
A. Unplug all removable devices (USB drives, Thumb Drives, SD Cards, Etc...) but leave the Android phone plugged in.
B. Open Windows Device Manager.
C. Select "Universal Serial Bus Controllers"
D. Select USB Mass Storage Device.
IMPORTANT: Click on the details tab and select "Compatible Ids" under the Property drop-down. You should see three items listed under Value. If not, you are looking at the wrong Mass Storage Controller.
E. Select Uninstall Driver
F. Close the window.
G. Right-Click your computer name at the top of device manager and select "Scan for Hardware Changes".
H. Your new "Android Phone USB device" with a Yellow Exlamation mark! will appear under Other Devices.
I. Click on the "Android Phone USB device"
J. Select "Update driver software"
J. Select "Browse my computer for driver doftware"
K. Browse for the location that you have unzipped the android_usb_windows ( Mine is: C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver )
6. Now test to make sure you can access your device in USB Debug mode:
Type the following from a command prompt:
adb kill-server
adb devices
You should see your device serial number at the command prompt and in Windows Device Manager if everything worked.
drivers
USB Drivers have been posted on the vizio support website for Intel and for AMD. Are they crucial to what you want to do about rooting?
USB Drivers Not Installing
[email protected] said:
USB Drivers have been posted on the vizio support website for Intel and for AMD. Are they crucial to what you want to do about rooting?
Click to expand...
Click to collapse
I grabbed those drivers a couple of days ago and could not get Win7 or WinXP to install them with the vtab1008.
I can use adb to interface with the vtab008 (using Linux and Win7), but GingerBreak and SimpleOneClick (which uses GingerBreak) are unable to root the vtab1008.
I've been pestering Vizio about the downsides of the tablet. Coming from a rooted Nook, there are some things about the vizio i really like. It's a nice build at an attractive cost. If I can get netflix and hbo go working, a better remote app and a more logical system of using the sd card, I would keep it. Otherwise it goes back to Costco on the 89th day after purchase.
Agreed
[email protected] said:
I've been pestering Vizio about the downsides of the tablet. Coming from a rooted Nook, there are some things about the vizio i really like. It's a nice build at an attractive cost. If I can get netflix and hbo go working, a better remote app and a more logical system of using the sd card, I would keep it. Otherwise it goes back to Costco on the 89th day after purchase.
Click to expand...
Click to collapse
This is my thinking EXACTLY!
[email protected] said:
I've been pestering Vizio about the downsides of the tablet. Coming from a rooted Nook, there are some things about the vizio i really like. It's a nice build at an attractive cost. If I can get netflix and hbo go working, a better remote app and a more logical system of using the sd card, I would keep it. Otherwise it goes back to Costco on the 89th day after purchase.
Click to expand...
Click to collapse
Yes, I agree. If there's no root, the tablet is not worth it.
The drivers worked for me.
I downloaded the drivers from the Vizio site and when I plugged the VTAB into my computer I manually installed the driver. I just used adb to grab a bunch of screenshots.
OP worked for me (without the mass storage issue)
Code:
adb reboot bootloader
just did a true reboot
Code:
adb reboot recovery
got me the exclamation mark and the "Home" button brought me to a recovery screen where it would let me flash signed updates or cache/full wipe the device.
You can get to recovery mode by holding down both volume buttons and the power button. Details
I cant even get the drivers to install. I've did a right click on the .inf file and it will not install. Any Ideas?
Thanks
Mark
Mark0266 said:
I cant even get the drivers to install. I've did a right click on the .inf file and it will not install. Any Ideas?
Thanks
Mark
Click to expand...
Click to collapse
DL the drivers from the Vizio site. Turn on USB debugging on the VTAB. Plug the VTAB into your computer. When the install driver prompt comes up follow the steps to install a driver from a specific location and point it to the driver you downloaded. The steps will vary depending on the version of windows you are running.
marvin02 said:
DL the drivers from the Vizio site. Turn on USB debugging on the VTAB. Plug the VTAB into your computer. When the install driver prompt comes up follow the steps to install a driver from a specific location and point it to the driver you downloaded. The steps will vary depending on the version of windows you are running.
Click to expand...
Click to collapse
Thats the problem the prompt never comes up. Running Windows 7
Well I got the driver for adb to install but it still will not show up when I do adb devices
Bootloader?
the.joeba said:
OP worked for me (without the mass storage issue)
Code:
adb reboot bootloader
just did a true reboot
Code:
adb reboot recovery
got me the exclamation mark and the "Home" button brought me to a recovery screen where it would let me flash signed updates or cache/full wipe the device.
Click to expand...
Click to collapse
Did you actually get into the bootloader? adb reboot bootloader simply reboots the device for me.
So whats with gingerbreak? No love with it? I thought this thing was rooted already prior to shipping? Hmmm. My bro just ordered one for me and I am curious about getting it rooted. Lets get this thing rooted and overclocked and get it some love. Also, whats the word on honeycomb on this beast? anything?....
Mark0266 said:
Well I got the driver for adb to install but it still will not show up when I do adb devices
Click to expand...
Click to collapse
Same here.
Rooting help
I have some coding knowledge, but have never worked on rooting a device. I did not pay for mine, so if anyone has references to some info I can look at about obtaining root then I will work on mine without fear of bricking it.
I have been at this for weeks, to no avail.. tried changing params in Gingerbreak, tried running it under every condition possible, and the only thing I haven't tried is changing how GingerBreak is using the /sdcard/ mount point, as that's where the internal memory is mounted to.. It's a pretty odd move to make, and I don't like having my true sdcard in /sdcard/external. what a crock :/
This tablet has to have a way to be rooted, I tried an older version of gingerbreak 1.1 just kept running, never failed, but didn't root the tablet just kept running, like it was gonna root the tablet, kinda weird, I do know that the bootloader is not locked down, my wife works for vizio, the company gave there employees a tablet for free
First of all, Credit goes to Scepterr who ran me through all this.
Secondly, do this at your own risk. I am not responsible for your screwups.
Third, READ and FOLLOW directions. If you skip around and screw up, it's your fault.
Fourth, This is for Windows, not mac.
If ADB is not working for you over a wired connection, it's because your usb driver is out of date. Here's what you do:
go to google's dev site and download the latest sdk that allows you to download the newest driver:
Here
unzip it into a folder and run SDK Manager.exe
wait a moment.
you'll see Choose Packages to Install.
Click cancel
click on Available packages
click on the arrow left of the checkbox for "Third pary Add-ons"
click on the arrow left of the checkbox for "Google Inc. (dl-ssl.google.com)
check the box for Google USB Driver package, revision 4
click Install Selected (bottom right button of the screen)
let it install.
allow it restart ADB
verify installation by clicking on Installed packages
if it's there, then it's installed.
go to your device manager
right click computer
click properties
click Device Manager
find the USB mass storage related to your TP.
You can tell this by removing the tp with device manager on. the one that goes away under Universal Serial Bus Controllers
Plug it back in.
right click that device (usually named USB Mass Storage Device) and uninstall it.
when it's done uninstalling, Right click on your computer name and click Scan for Hardware Change.
let it reinstall it
You're done.
Verify by typing "adb devices" in the command prompt (without ")
if if finds a device with the touchpad plugged in, you're good.
congratulations, you got wired ADB back.
bump. in case some people haven't seen it
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Good write up!
The procedure worked fine on my laptop. When I did it on on my home PC I forgot to disable auto-mount and the Nook installed itself as mass storage. I was able to right click -> un-install all the USB Mass Storage entries (with the Nook unplugged), disable auto-mount, plug the Nook back in, and have it show up correctly.
In short, I did not need to use "USBDeView" as I was able to remove the diveres manually. I suppose if you have more than a handful for USB devices (I just have a Mouse, Keyboard, and printer) "USBDeView" might be helpful to determine which drivers to un-install...
The device manager is enough for most people, but there is a somewhat large number of us that are having trouble still. Possibly because of other devices we have installed before. (I dont understand how all the drivers work and I wont pretend to)
Some people have go so far as putting a fresh install on Windows on a partition of a PC.
I had this problem with both my laptop and my desktop, which surprised me. This worked on both the laptop and PC, so hopefully it can help other people.
I cant wait to get my own tablet on the 12, I will take lot of pictures and make this process more user friendly.
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
mtelesha said:
I did all of the steps several times and I still get WPD Driver for the portable device and mass storage for my Nook Tablet. I am guessing I am up a river without a paddle right now.
I will try it in Linux and/or try it on someone's Windows machine.
Click to expand...
Click to collapse
Did you sort by last time plugged in and delete all of those too? Have you re-checked and then re-un-checked automount/usb debugging and such?
This is interesting, you'll have to come back and let me know if you ever get it working on your PC. Maybe its a good excuse for a nice healthy re-format and reinstall of windows?
l3ft3r1s said:
I am trying to install the drivers from Google's SDK package. So I browse to the correct folder, but device manager says "windows could not find driver software for your device".
Any suggestions? Is there any other set of drivers specifically for NT?
Click to expand...
Click to collapse
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
The_Joe said:
I don't know if they are different, but I used the drivers specificly from the thread about rooting the NT. [I would post a link, but I'm typing from my phone]
You have the yellow error mark next to your device? If so you've almost got it!
Click to expand...
Click to collapse
Yeap, that did the trick, thanks. Drives installed successfully this time, but adb devices still returns nothing.
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
adb error: device offline
This drove me nuts for at least a day. Turns out it is what happens when you are plugged into a USB 3.0 port on your PC side. Find out which USB is 2.0 (Front Panel for ZT Systems), use it and life suddenly gets really good.
The_Joe said:
Thats very odd. It shows up in device manager as an ADB device?
If so, please try the NookandZergy file, then copy the results so we can try to farther assist
What devices have you rooted before?
I cannot help but feel I will be 100x more useful in a week when I have my device in hand...
Click to expand...
Click to collapse
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
l3ft3r1s said:
At last, after many different things I tried, I am getting a response to adb devices!
I tried disabling and uninstalling usb devices, uninstalling java 7 and installing java 6, re-installing android sdk, at last it worked. Sorry, I can't guess what the problem was :/
Click to expand...
Click to collapse
The problem is sdk uninstall and use ccleaner to clean your PC and registries. Use the drivers provided in this forum
Sent from XDA using one of my Android Toys
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
LadyPenley said:
Edited post to: Sorry to bother anyone, I found the problem. Thank you all for helping!
Click to expand...
Click to collapse
In the future don't delete your original, just post an edit with the fix. That way when someone else has a similar problem your post can help.
Sent from my BNTV250 using xda premium
mtelesha said:
Well I have done everything and still get permission denials for copying and chmod on my Nook Tablet.
Took the Nook to work and tried it on a fresh machine. Everything went great. Drivers installed and everything ready for usb debug and non-automount and then I run into the same permission errors and being denied access to the folder for Zerk and no chmod.
Same issue no matter what machine. What is wrong with my tablet? I am re-rooting it from being automatically upgrade to 1.4.1. I get it to 1.4.0 with the SD card restore.
Click to expand...
Click to collapse
Did you find a solution? Thats a problem I sadly dont know how to help with. I would start with:
-Check USBDeview and delete anything android/Nook/usb related. Delete just about everything.
-Restart the device
-Uncheck and recheck the USB Debugging boxes
-Recheck and uncheck the auto-mount box
-Test
-Try a different USB Port
-Try another PC
Thanks but didn't work.
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
The_Joe said:
(I cannot post links at this time, a quick Google Search or a look at the Topic titled "Full Root")
The goal of this guide:
I rooted my family members Nook last night but got hung up for a few hours trying to get the ADB Drivers enabled. This is how I made it work. This guide will be expanded and improved once I have my own Nook Tablet (Jan 12th).
Things you need:
• Nook Tablet (Duh)
• USB cord to go between NT and Windows PC
• PC with Windows installed (Tested on XP and x64 Windows 7)
• TGPS_Launcher.apk Installed to your Nook
• ADB USB Drivers for Nook Tablet Extracted to C:\Ntroot on your PC
• USBDeView open on the Windows PC
Step 1:
Ensure that your Nook is version 1.4.0 and not 1.4.1. (I will expand this step later when I have a nook in my hand, I suggest a Google search if you do not know how to do this)
Step 2:
Find this thread on your Nook and download the TGPS_Launcher.apk to your device, then install it. This is well covered in many other threads. (Will expand this step when I have a nook in my hand)
You should now be able to allow USB Debugging, and disable Auto Mount. These settings can sometimes change without your permission, so always uncheck and recheck them to ensure they are properly set.
Step 3:
Plug in your Nook to your PC. Your nook should still respond to your commands, if it tell you in USB Mass Storage mode, then retry Step 2.
Go into your Device Manager. If your Nook shows up with a yellow explanation mark indicating an Error, then you’re in business and really don’t need this guide. All you need to do is update drivers from the file C:\Ntroot. However, assuming that your Nook shows up under Disk Drives and USB Mass storage, then ADB wont be able to see your Nook, please keep reading.
Step 4:
Time to start the USBDeview utility. This utility will open to a list of almost all the drivers your computer has for USB Devices. We are going to uninstall a few of them, namely anything that says “Android” “Nook” or in my case, “Motorola”. You do not need to remove any that specify ADB.
Near the top right hand side, you can sort drivers by when the device was last connected. Do this, then remove any utilities used when you plugged your nook in. Done? Ok, time to see if your work was for nothing.
Step 5:
Make sure once again that USB Debugging is turned on for your Nook. Unplug the Nook, then Unchecked USB Debugging and Check it again. Now plug your device back in and check in Device Manager. You will hopefully see one of two things:
A: You will see your nook with a yellow error icon next to it, which means you just need tell it to update from C:\Ntroot.
B: At the top of the device manager you will see Android Devices, and your nook will show up as Android Composite ADB Interface
If your Nook is still showing under disk drives and mass storage, then try steps 3 and 4 again. Still having trouble? Do a factory reset and try again from step 1.
You should now be able to run your rooting program!
(I feel this should be in the Dev forum, but this is my first post and I was not allowed. Perhaps a mod would like to move this topic?)
I plan on purchasing my own Nook on the 12th on Jan, at which point I will add pictures and expand on my guide. This guide is written from memory and will be edited and improved.
Please consider this guide an Alpha Version
Click to expand...
Click to collapse
whitets said:
thanks, Joe. I did exactly as you mentioined below and had the Android/Nook appear at the top of the Devices listing. However, the adb command still can't find the device. Any suggestions?
Stan White
*****************
Click to expand...
Click to collapse
I had literally this exact same problem the 6th time I restored and flashed. IF im right, you just need to uncheck then recheck usb debugging.
Let me know if it works!
So, apparently I need to install a few drivers for rooting this. The one set of instructions I got is to enable USB debugging and then find a device called "ASUS Android Composite ADB Interface" with an exclamation mark in Windows Device Manager. Trouble is no such device exists. I plugged in the TFP with USB debugging!
What to do?
What version of Windows are you running? Do you have Asus sync? If so can you see the Prime as a storage device when connected via USB?
It can show up as various items depending on which driver version and the actual text string in the .inf file. Have you tried having device manager already open and watch it to see what ( if anything) changes as you connect the prime? It can appear as a device under the "android phone" heading or as other things... plug it in whilst watching device manager update, let us know what is added to the list and maybe we can help...
Sent from my transformer prime which is currently transformed into a small bowl of petunias
I was unable to find help elsewhere, so I was recommended to come here. No rooting, hacking, reprogramming, or anything else. Just a basic connection problem.
I recently bought a new Solid-State hard drive, and re-installed Windows 7 on it. Everything is great, and it's fully updated.
My problem is that while my LG Optimus G E980 phone will charge via the USB cable, I can't "open" it in My Computer, to transfer pictures, music, etc.
I have tried downloading the driver from LG's Website (LGMobileDriver_WHQL_Ver_4.1.1), but when I run it, I get the following message:
"The Microsoft MTP driver is not found on your system. Please install Windows Media Format Feature Pack using Download Link for your media device to work correctly."
It then provided me with a link to download this. However, when I do that and run the update, I get told the update is not applicable to my computer.
Whether I try to install this update or not, it doesn't matter, because the driver installation tells me it was installed successfully. However, judging by the icon in my Taskbar with the red/white "X" and the fact that my phone still won't connect, it hasn't.
Yes, my phone is set up to ask me what I want to do when connected to the PC, and Media sync (MTP) is selected. Here's the kicker... remember, I have two hard drives. When I boot using the other hard drive, the phone connects with no problem. Same USB cable and port. Therefore, this is DEFINITELY software-related.
Is there something preventing this driver from installing? Why is the phone not installing the driver itself? Thoughts would be appreciated! Thanks.
Have you Manually installing the driver from Devices manager?
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. Normally it is located in the following directory: C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
Select "Android ADB Interface" from the list of device types.
langithitam said:
Have you Manually installing the driver from Devices manager?
Enter the path to the Google USB driver. Normally it is located in the following directory: C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
Select "Android ADB Interface" from the list of device types.
Click to expand...
Click to collapse
Thanks for the quick reply.
I searched, and do not have a folder called "Android".
I did, however, find a folder called "LG United Mobile Drivers", however there are about 30 different drivers in there. I picked a few, including "Lgandadb" and "Lgnetandadb", but I get told "Windows encountered a problem", and "This device cannot start (Code 10)"
Anyone?
Ok, I'll try to put it another way. When you first connect an Android phone to a PC, drivers are installed automatically. I'm willing to bet there was an error when I installed them on my new hard drive.
Are the drivers already a part of Windows? If so, perhaps I need to do a Repair of Windows?
Are they located in an Auto-Run file on the phone, and maybe I need to re-run that program?
Perhaps there's something I need to delete or flag so that my phone thinks it's the "first time" again?