restoring stock rom via cwm4 from cm7 - Galaxy Ace S5830 General

help guys i flashed my ace into behradgh cm7 but the sim tool kit is not working and im a prepaid user i need that so restored my stock rom backup on cwm4...the restoration process completed the i reboot the phone but im stock to the second samsung logo help plzz..,i can go to cwm4 tried restoring again but it did'nt work help how can i fix this without using odin to flash my phone.

fusty07 said:
help guys i flashed my ace into behradgh cm7 but the sim tool kit is not working and im a prepaid user i need that so restored my stock rom backup on cwm4...the restoration process completed the i reboot the phone but im stock to the second samsung logo help plzz..,i can go to cwm4 tried restoring again but it did'nt work help how can i fix this without using odin to flash my phone.
Click to expand...
Click to collapse
Boot back into recovery, wipe phone, wipe cache, wipe dalvik cache, restore stock ROM again.
Should work ok now...I hope!
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk

i already did that many times but after rebooting its still stock on the samsung galaxy ace logo,...i tried formating the system cache and etc but is the same....

fusty07 said:
i already did that many times but after rebooting its still stock on the samsung galaxy ace logo,...i tried formating the system cache and etc but is the same....
Click to expand...
Click to collapse
Then I have no idea buddy. I encountered the same problem when I flashed CM7.1 and tried to restore stock firmware. I gave up in the end but I was led to believe that wiping both caches would alleviate the problem. Hopefully one of the developers will read this and have a solution. Sorry I couldn't be of more assistance. Good luck =]
Sent from my HTC Sensation XL with Beats Audio X315e using Tapatalk

fusty07 said:
i already did that many times but after rebooting its still stock on the samsung galaxy ace logo,...i tried formating the system cache and etc but is the same....
Click to expand...
Click to collapse
it's not possible to flash back stock rom backup after flashing a cyanogen.
its because CM7 coverts your file system from RFS to ext4 which your stock rom is incapable of.
Try to use CF-Root found on android development section, convert your file system back to RFS using Ext4 Manager (which you can find after flashing CF-root) then flash back your stock back up. This should be work.

ok...still waiting for other comments...

hehe tol ganun ba?but how can i install cf root im stock on the samsung ace logo?

D best way, Odin.
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]

fusty07 said:
hehe tol ganun ba?but how can i install cf root im stock on the samsung ace logo?
Click to expand...
Click to collapse
Use english kabayan. For others to understand too..
Try to flash first Sangingerace*Lite (depending what FW version you are using). I believe you can convert your file system with patch provided on that thread.

The simplest way is flashing a full package firmware using ODIN, then flash cwm and restore you backup.

Hey bro, I think the problem might be that while backing up from cwm your backup might have been crammed into your sd card due to lack of space. This happened to me also I was stuck at the SGA splash screen. So I tried clearing caches and wiping the phone to no avail.
But as my last resort I just flashed my phone with CORRECT firmware through ODIN. hope I helped!
Please update me.
Sent from my GT-S5830 using XDA App

Related

Unable to install CyanogenMod 7 again!!!

Hello guys,
I would have not made this post without a reason! I have searched the froum and used google for over 2 days but dont have a solution for my problem that's why i opened the thread!
My SGS2 was on CyanogenMod 7 and i decided to try the leaked version of 4.0.3 (I9100XXKP8 to be exact) so i preformed a full backup via recovery!
After this i flashed 4.0.3 using ODIN and used it did a root on it and istalled CM9. I did this just to see the real difference between the 2 firmwares. Everything worked great i had no problems at all.
After i was finished playing around with the firmwares i decided to restore my CM7 backup! I had no problems booting into recovery and the restore worked fine! no errors or anything. After i selected to reboot my device i got a Kernel Panic and couldn't do anything!
So i flashed KI3 stock from sammobile and rooted it via CF and then again i tried to install CM7 which goes fine through the install no errors! when i select to reboot the phone i have the ''Samsung galaxy s2 screen'' in a reboot loop! I reflashed the phone again with KI3 and tried again i followed the instruction step by step including wiping data/factory reset and wiping cache the same thinghappens. I tried to restore the CM7 back which i made, the restore process goes through but i get a kernel panic! So i reflashed KI3 again i thought it could have been the bootloader... i got the old boot loader and flashed it but i keep getting the boot loop! The strange thing is i can flash CM9 and it works but CM7 will not install on my phone at all! I have tried flashing it 10 times in the last 2 days.
Can anyone help me fix this and get back to CM7 because i dont know what to do anymore my flash count went from 5 to 39 in the last 2 days!
Note: i have tried using recovery and RomManager neither of them work! Also tried Stable CM 7.1.0 and nightly builds!
Try this and then restore again:
http://forum.xda-developers.com/showthread.php?t=1363738
Sent from my GT-I9100 using xda premium
Gnarfsan said:
Try this and then restore again:
http://forum.xda-developers.com/showthread.php?t=1363738
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi,
i have tried this now and i am still getting a reboot loop! So it dose not work at all :[
I'v had the same problem. It was solved by flashing the .pit file for cm7 with odin.
That is very strange. I assume that you did a factory reset after that procedure?
Sent from my GT-I9100 using xda premium
syue87 said:
I'v had the same problem. It was solved by flashing the .pit file for cm7 with odin.
Click to expand...
Click to collapse
Can you tell me where you got the cm7 .pit from? as i am using the one provided with the OFW of KI3... Thanks again!
Gnarfsan said:
That is very strange. I assume that you did a factory reset after that procedure?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes i reset everything there was i did this whole guide step by step about 20 times tried everything! i even had help from the guys working on CM9. They couldn't help and told me to open a thread here :[
Well, the pit file is probably the best bet then. Good luck when you get it.
By the way I meant a factory reset after the kernel clean and restore.
Kernel clean -> restore -> factory reset.
Gnarfsan said:
Well, the pit file is probably the best bet then. Good luck when you get it.
By the way I meant a factory reset after the kernel clean and restore.
Kernel clean -> restore -> factory reset.
Click to expand...
Click to collapse
I have tried this still no luck :[ Also tried previous back ups but the are not working either. I also tried to flash Villian rom 3 now and the only thing that happens it stays on ''Samsung Galaxy s2'' screen no reboot or anything for bout 10 min. tried to go into recovery but it isn't working :[ back to flashing KI3 again!
Which kernel were you using when you originally made that cm7 backup? Was it the stock cm7 kernel or perhaps siyah's? The kernel panics are probably due to using a cm9 kernel(recovery 5.5...) to restore a cm7 backup and then using cf-roots ki3 kernel(recovery 4.2...)to restore a cm7 backup. I'd try flashing siyah's kernel(recovery 5.0...) through odin and then try to restore that backup.
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
darrez said:
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Good point, the first install is usually quick, the 2nd one takes much longer and does the whole shebang.
TheRize said:
Can you tell me where you got the cm7 .pit from? as i am using the one provided with the OFW of KI3... Thanks again!
Click to expand...
Click to collapse
The forum won't let me post links. Just google search "Odin_+Pit_+_Flashguide_-_I9100.rar".
peachpuff said:
Which kernel were you using when you originally made that cm7 backup? Was it the stock cm7 kernel or perhaps siyah's? The kernel panics are probably due to using a cm9 kernel(recovery 5.5...) to restore a cm7 backup and then using cf-roots ki3 kernel(recovery 4.2...)to restore a cm7 backup. I'd try flashing siyah's kernel(recovery 5.0...) through odin and then try to restore that backup.
Click to expand...
Click to collapse
I was using the stock Kernel from CM7 to create the backup! The problem is i cant install a clean version of cm7 at all i end up in a boot loop! But if it try to install CM9 i have no problem? I will try to flash recovery 5.0 and try again :]
darrez said:
Hv u try flash the cm7 twice in cwm before u reboot?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes i have tried this about 10 times so far! I have read this on the Cyanogenmod forum but it didnt help : [
Re flashed 5.0.2.7 recovery and tried to do a restore. now the phone is stuck in a reboot loop again! So this dose not work either :[
Now i have also tried to do a fresh install of CM7 with the 5.0.2.7 recovery but it didn't work! I would be great full if anyone could help me!
Boot into recovery
wipe data/factory reset
goto mounts and storage > format system
install cm7 from sd card, then install it again right after
reboot
If this doesn't work throw the phone against the wall because this should work, unless flashing those bootloaders messed something up, or you flashed the wrong one.
as a last resort....
flash stock firmware.
flash cfroot kernel
try to flash cm again.
always works for me.
peachpuff said:
Boot into recovery
wipe data/factory reset
goto mounts and storage > format system
install cm7 from sd card, then install it again right after
reboot
If this doesn't work throw the phone against the wall because this should work, unless flashing those bootloaders messed something up, or you flashed the wrong one.
Click to expand...
Click to collapse
I have tried this as well!!! I was told by one of the CM9 members to do this! Didnt help :[ The thing is i got the old bootloader and flashed it unless there is more versions of it ????

[Q]Installing custom rom on I9100.. Possibly bricked

Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
arunreturns said:
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
Click to expand...
Click to collapse
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Did Root once again (Sorry For not mentioning)
Sun90 said:
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Click to expand...
Click to collapse
Yeah i did root using CF Root. Hence i got CWM from which i did wipe data, wipe cache and then Installed zip from sdcard. (F1 galaxy nexus from Faryaab) It got installed. Then again stuck at the boot logo. Dont see the boot animation
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Tried it no go
atifsh said:
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi..
I did what you told me to. Still get the same boot logo
Guess my phone is done for R.I.P
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
What intrigues me is that, If i use KL8 alone (which is flashed via odin) Am able to use the mobile. use it well actually
But if i try to use any other ROM its stuck in the Boot logo
I tried LPQ from Intratech. Even that didnt work.
I thought this could be an issue with the kernel
(But i realised i was able to flash CF Root's kernel and move back to stock kernel so there would be no issue with regards to Kernel.)
Incorrect or Incomplete download wont be an issue i guess as I tried two to three ROMS.
Btw. I used this link
http://www.technetinfo.in/mobile/mobile-software/i9100xxkp8-android-403.html
I followed all the Instructions (Guess may be cause of the PIT file. I'm not sure cause ive seen in posts that we should not lay hands on PIT files)
So someone please help me out.
Will be ever so grateful
atifsh said:
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
By formating system cache data you mean wipe options in CWM right. That i have done lotsa times. Can kernel failure cause these issues, as once i got Kernel panic mode error??
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Finally Issue solved
JJEgan said:
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
Click to expand...
Click to collapse
cooza said:
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Click to expand...
Click to collapse
Thank you for your help.
Issue has been solved. Now am able to Install F1 Galaxy Nexus ROM
I'm putting dual booting aside for now. Will stay on CM9 kernel itself
Thanks again for your help

[Q] Help! Samsung GT I5801 boot Loop on cyanogen mod 7.

So yesterday I finally tried to install a custom ROM on my Samsung GT i5801 phone which previously ran Froyo. I didn't know much about ROMs and its my first time so i tried to use one of AOKP ( http://forum.xda-developers.com/showthread.php?t=1548627 ) I don't know why but it wouldn't install using CWN v.5.0.2.8 and I tried to do it anyways using ODIN. It kinda flashed it but it never worked. It destroyed my stock ROM and I didn't have any backups.
Then I found a Cyanogen mod 7 ROM for GT I5801 and I installed it on my phone using CWN. It installed fine but keeps boot looping. I tried everything after that. Clearing cache, Dalvik Cache, and even tried to re-install the ROM using the wipe data/ factory reset and installing the Cyanogen zip file, but it still boot loops.
Can anyone tell me of a solution, please?
Any help is welcome.
My friend,just ask your question in galaxy 3 forum.There is also guide,how to flash rom.
Sent from my GT-I5800 using Tapatalk 2
pratikmore said:
My friend,just ask your question in galaxy 3 forum.There is also guide,how to flash rom.
Sent from my GT-I5800 using Tapatalk 2
Click to expand...
Click to collapse
Um, I tried finding the Galaxy 3 forum, but I couldn't. Can you please give me the link to that form?
Try wiping everything on the phone including the system, then pull out the battery, reboot in download mode, and then flash a stock Rom on your gt-5801. This should bring you back to a bootable Rom.
Now repeat the process of rooting and installing cwm/cm7
Sent from my GT-N7000 using xda app-developers app

flashed wrong CWM

Hello
I've accidentally flashed a wrong cwm-recovery (meant for some other phone)
After the installation I've rebooted into recovery and it booted the one I already had (that's when I understood it's the wrong one)
Then I've tried to reboot back to my rom but it got stuck on the rom's loading screen
Tried to flash a new rom after using gs2RomWipe
Tried to restore from a nandroid backup
all of them gave the same result.. stuck on the loading screen
Now to my question...
If I flash a stock Rom via Odin.. will it be enough? will I be able to reroot and use my phone normally again?
Or is there an easier way maybe?
i did the same today..
all the time bootloop..
flashing same rom that i was using did not helped..
flashing some other rom helped but cant call cause phone dont see simcard..
flashing some other roms like cyanogenmod also stuck my on bootloop..
I am pretty sure you have to flash via odin.
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
PureMind0 said:
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
Click to expand...
Click to collapse
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
I'm not even sure if the problem is because of the efs missing or not but it seems to be the problem
PureMind0 said:
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
Click to expand...
Click to collapse
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
PureMind0 said:
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
Click to expand...
Click to collapse
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
PureMind0 said:
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
Click to expand...
Click to collapse
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
still nothing...
and it usually takes 1-2 mins max for me
also doesn't explain why stock from odin wont work
It seems to me that I need to somehow fix the efs folder but no idea how to do that
almost all the guides I've seen about that requires the rom to work and use root explorer
the others wasn't clear enough or just not related
according to the shell commands my efs folder is empty
copying the efs folder I have on my sdcard doesn't help because it's not there after reboot
I have a tar.gz as well but not sure how to use it
can I flash the .tar via odin? or some other solution with adb/shell?
or do you think it has nothing to do with my problem?
anyone have any idea how to help me???
I've tried many different ways but my device just wont make it past the loading screen of the rom (doesn't matter which one)
I really have no idea what can cause this problem
thought that flashing stock rom via Odin should fix it but it doesn't help
I've tried some methods I've seen to fix efs problems but so far nothing helped
I'm really desperate at the moment :\
download mode and flash the cwm kernel via Odin should work.
Sent from my GT-I9100G using xda app-developers app
i am facing exact same problem
and it also start with flashing cwm for kitkat
nothing working now stock or custmised rom
hope some one can help us to fix it
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
PureMind0 said:
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
Click to expand...
Click to collapse
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Good luck!
I should send mine tomorrow and hopefully they can fix it
update when you get yours back
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Did you get your device fixed?
OK.....just a quick thing......Odin flashing a normal single file stock firmware *may* not be the solution as it just overwrites what is already there during the flash. I will provide a link to a three part firmware that wipes the old as it flashes.....this essentially flashes the firmware onto 'pristine' memory partitions....it *might* help......
Here's the link.....
http://www.mediafire.com/?1z5ao5b6r594x45
Search for @Hopper8s Odin troubleshooting guide for instructions on how to flash it.....
Good luck.....
This might be my S2, or it might be my W...but it's definitely CM

[Q] [HELP] Formatted system and SDcard

background info:
samsung galaxy s3 i9300. Rooted with cyanogenmod Installer: http://beta.download.cyanogenmod.org/install
A while ago I tried flashing a costum rom, however i wasnt fully satistied so went back to cyanogenmod. My SDcard space went from 11gb to 2gb left. I went to recovery (CWM Touch) and formatted system and sdcard (which was a huge mistake I believe). As far as I know, I have no rom installed right now after the format. Ive downloaded MIUI and put it on my external SD and tried flashing it from my external SD. After wiping dalvik, cache and factory reset flashing went well. When I press reboot device CWM says "root access is missing, root device?" Now there are 2 options: "no" and "yes root device (/system/xbin/su)". Both options result in my phone stuck at the boot animation.
I thought because I had no root, I had to flash a stock rom. So I downloaded a stock rom and tried flashing it. CWM said "installation aborted". So right now Im kind of clueless. Can anyone help me and tell me what to do? Ive been searchin this forum for quite a long time now. Any help would be appreciated.
Kind regards
Tried deleting data?
Choristav said:
Tried deleting data?
Click to expand...
Click to collapse
yap, there was a lot of data I couldnt access. I wanted to clear the whole SD and flash a new rom so I could basically start over again with a fresh new SD
Which stock rom you installed??
And are you able to flash that miui rom you talking about now??
If it asks fit root just click no.. That's a problem I guess with the recovery not detecting root but you still have it.. just not into your rom by clicking no... then if you don't have root you can flash a supersu file through recovery..
Sent from my GT-I9300
Can u try using odin?
Sent from my GT-I9300 using xda app-developers app
Yes, unless it is a repackaged stock rom you must use odin, not CWM to flash it. You could try using archie's rom or one of Wanam's in CWM. Or download a repacked stock that is flashable in CWM.
kunal1540 said:
Which stock rom you installed??
And are you able to flash that miui rom you talking about now??
If it asks fit root just click no.. That's a problem I guess with the recovery not detecting root but you still have it.. just not into your rom by clicking no... then if you don't have root you can flash a supersu file through recovery..
Sent from my GT-I9300
Click to expand...
Click to collapse
I believe Ive tried flashing this stock rom
https://romhut.com/download/rom/51c4d86e79792
Yes the MIUI rom has been flashed "succesfully". Only thing is when I reboot my phone, it gets stuck at this screen:
http://i1162.photobucket.com/albums/q539/Rushabh_Kothari/800_00098.png. The phone has been rooted before as Ive been flashing several roms before.
Can u try using odin?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Ehm im not familiar with Odin. I used Cyanogenmod Installer to install CM. From then I installed CWM and flashed other Roms
Good news guys, I flashed CM and boot went well. Thanks for your time and help. Thread can be closed

Categories

Resources