Stuck which way to go? - Galaxy S II Q&A, Help & Troubleshooting

Okay guys, i need your help. My half witted brother has tried to root his phone with CF-root, but i think hes used the worng kernel as it wont boot now, it will only go into download mode which makes me think cf-root failed. Now hes trying to flash litening ROM but it fails on factoryfs.img on ODIN. Any ideas/suggestions what to do next?
Cheers
Ricey

ricey1986 said:
Okay guys, i need your help. My half witted brother has tried to root his phone with CF-root, but i think hes used the worng kernel as it wont boot now, it will only go into download mode which makes me think cf-root failed. Now hes trying to flash litening ROM but it fails on factoryfs.img on ODIN. Any ideas/suggestions what to do next?
Cheers
Ricey
Click to expand...
Click to collapse
Pull the battery and reinsert after 30 seconds.Go into recovery mode and wipe cache, dalvik cache and data/factory reset.Power down and go into download mode and try to flash a stock rom or Lightningpro with odin. Try another usb-port than the one you used before and see if IDCOM lights up yellow and the phone is added in MESSAGE. If so flash it and reboot

Find your carriers stock firmware http://forum.xda-developers.com/showthread.php?t=1113928 Flash via ODIN (DONT TICK RE-PARTITION) & then download\flash the correct root for phone.

Thats the thing it wont boot into recovery so i cant wipe, im going to go round in abit and have a look so ill give the rest a try when i get there.
Ricey

alferret said:
Find your carriers stock firmware http://forum.xda-developers.com/showthread.php?t=1113928 Flash via ODIN (DONT TICK RE-PARTITION) & then download\flash the correct root for phone.
Click to expand...
Click to collapse
Do i need kernal and firmware? Also where do i put the firmware and kernel on odin? (only ever used it twice as i use CWM)
Cheers
Ricey

ricey1986 said:
Do i need kernal and firmware? Also where do i put the firmware and kernel on odin? (only ever used it twice as i use CWM)
Cheers
Ricey
Click to expand...
Click to collapse
Follow the first set of instructions here to the letter: http://forum.xda-developers.com/showthread.php?t=1075278

ricey1986 said:
Do i need kernal and firmware? Also where do i put the firmware and kernel on odin? (only ever used it twice as i use CWM)
Cheers
Ricey
Click to expand...
Click to collapse
No flash the kernel or stockrom, not both. Place the stock rom in PDA and flash.
Only things ticked are Autoreboot and F.Reset Time. Don`t use a pit file.
Good luck

I've had similar problems before and simply reflashing a compatible kernal fixes it.
Sent from my GT-I9100 using xda premium

OK guys cheers for the help but i cant find his carrier ROM in there. its from Virgin UK. Would it matter if i used a different carriers say for example O2 uk?
Cheers again
Ricey

sxi200 said:
I've had similar problems before and simply reflashing a compatible kernal fixes it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Was thinking of flashing siyah kernel, if its successful i should be able to go straight into CWM without booting into rom first, shouldn't I?
Ricey

ricey1986 said:
OK guys cheers for the help but i cant find his carrier ROM in there. its from Virgin UK. Would it matter if i used a different carriers say for example O2 uk?
Cheers again
Ricey
Click to expand...
Click to collapse
Download any UK ROM to get the phone up and running to start with and then look for your carrier firmware later.Try XWKI4 (XEU) which is a carrier free UK firmware so will be fine for your region.Download the file,put it in PDA in Odin and hit start without selecting anything else.Dont tick re-partition.

Cheers for all the help guys really appreciated. Managed to flash LightningPro (first time) don't know why he couldn't lol. Anyway hes happy and i have a quiet life again.
Many Thanks
Ricey

Related

Can't flash with ODIN - PLEASE help!

Spent a frustrating day trying to sort this so I'm posting here as a last resort as I'm at the end of my tether!!
So. Was browsing the marketplace(new style) and my phone crashed and then would not reboot. It would only go as far as the Samsung Galaxy S2 screen. so I took out the battery and half an hour later returned to see if all was well when I reinserted the battery. It wasn't. I should point out at this point that I was happily using the latest MIUI and appart from the occasional reboot all was well. When reinserting the battery did not work I tried to reboot into CWM but found that I could not. I can however reboot into download mode so have been trying to reflash my phone using that. However I can't get past factoryfs.img! It just stops there every time! Tried :
Usb Jig
Different USB ports
Restart computer
Reinstalling Kies drivers
A different version of ODIN
Many different ROM files (including Litening 1.5 which I know works from a previous flash)
Re downloading various ROMs in case the download was dodgy
Please, please help. I just don't know what to do now
Im thinking its very possible that something in your phone fried and the only option you have is service.. From the way you describe things as not advancing past factory fs.
You make no mention of flashing a stock rom via Odin .That is the normal method of recovery.
jje
Sent from my GT-I9100 using XDA Premium App
Strange if true - I've never overclocked or anything!! Is there nothing else I can try?
JJEgan said:
You make no mention of flashing a stock rom via Odin .That is the normal method of recovery.
jje
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Downloading stock ROM as we speak. Fingers crossed!!
Shafty said:
Downloading stock ROM as we speak. Fingers crossed!!
Click to expand...
Click to collapse
No joy - hangs on cache.img
Can any of the other odin check boxes help? I daren't use them in case they do more harm than good!!
Please help!!
Going to bed now after the most frustrating day of my life trying to get this sorted. Please, if anyone has any ideas then post them here. Thanks.
i have ony small tip for you. kill all the Kies proceses in the backround with the task manager - before flashing with odin. other then that i have no idea how to help u mate.
Hunteres said:
i have ony small tip for you. kill all the Kies proceses in the backround with the task manager - before flashing with odin. other then that i have no idea how to help u mate.
Click to expand...
Click to collapse
Thanks for the tip but I'm still having no joy at all. Downloaded a stock ROM but still get stuck at cache.img. Going to have a full night at it again tonight then it's going to have to go back
Any help with this evenings endeavours would be gladly received!
Thanks.
Flashing.
Shafty said:
Thanks for the tip but I'm still having no joy at all. Downloaded a stock ROM but still get stuck at cache.img. Going to have a full night at it again tonight then it's going to have to go back
Any help with this evenings endeavours would be gladly received!
Thanks.
Click to expand...
Click to collapse
Are you shure that you use all 4 files to flash with odin. My friend got similar problem stuck in the middle of flashing. But when i tried everything goes ok.
Im using odin 1.85
Regards
mcnaget said:
Are you shure that you use all 4 files to flash with odin. My friend got similar problem stuck in the middle of flashing. But when i tried everything goes ok.
Im using odin 1.85
Regards
Click to expand...
Click to collapse
What 4 files? Just putting one file in PDA at the moment?
Flashing.
Shafty said:
What 4 files? Just putting one file in PDA at the moment?
Click to expand...
Click to collapse
Thru odin you must use 4 files first you have to use pit- ext4 , then- pda , then- phone , and finaly csc.
You got all files here and do please read.
These are stock roms.
http://www.samfirmware.com/fwandroid.htm
mcnaget said:
Thru odin you must use 4 files first you have to use pit- ext4 , then- pda , then- phone , and finaly csc.
You got all files here and do please read.
These are stock roms.
http://www.samfirmware.com/fwandroid.htm
Click to expand...
Click to collapse
BEWARE DO NOT USE PIT NOR REPARTITION
Stock roms are flashed via ODIn as a single tar file in PDA in normal circumstances .
All the info is here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Flashing.
JJEgan said:
BEWARE DO NOT USE PIT NOR REPARTITION
Stock roms are flashed via ODIn as a single tar file in PDA in normal circumstances .
All the info is here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
I dont have any problems flashing thru odin with all 4 files stock rom , i have never flashing thru odin only pda file stock rom.
regards
Latest:
Unistalled Kies
Installed a newer Kies
Tried Odin 1.83 instead of 1.85
Since reinstalling Kies and reinstalling the drivers, my computer won't recognise the phone at all even in download mode. Might have to admit defeat soon
Flash this recovery package, which is XXKI3, 2.3.5, Open Europe http://hotfile.com/dl/130600047/b70801e/I9100XXKI3.rar.html
Tick the 3 top boxes (Re Partition, auto reboot and F.Reset time)
PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
If that doesn't work or fails, flash this, which is a XXKI3 Kernel : http://www.multiupload.com/WDOO81L5H6. After that, re-flash the recovery package (with PIT and repartitiong, but be careful )
Report back if it doesn't work, and good luck!
If that doesn't work, flash the old bootloader : http://www.multiupload.com/LQQBRQVJUD in either the PDA or Bootloader section in ODIN. If that is successful, flash the Kernel again, and then the XXKI3 recovery package I gave you.

pretty lost!! speedmod or cfroot

well after trying to find a good kernel for my
SGS2 - MEXICO TELCEL
[email protected] #2
GINGERBREAD.UMKK1
2.3.6
im so gud damm lost!
yes i have tryed google search & xda search, trying this
CFROOT SGS2 KK1
OR
SPEEDMOD KERNEL SGS2 KK1
i haven't find any close, and what i found are from multiupload, so guess what, multiupload is down!!
so i dont care if it is cfroot or speedmod kernel, i wanna start trying using another roms, i have root on my phone, rom manager installed, and it alos says i have cwm but it is not working because i used a newbie version of it called UNLOCK ROOT, it is find for using some apps, but is not working cwm at all.
when i reboot my device in cwm, it display androids normal recovery. so
guys any help?, im afraid of using the wiki of cyanogen, because i haven't see any post of people using that.
thanks.
yeyeye i have seen the NOOB VIDEO many times from xda, so dont hate jajaja
Check the Chainfire thread in post #4. KK1 shows in there.
http://forum.xda-developers.com/showpost.php?p=19030747&postcount=4
well well well i already brick my phone
installed Speedmod k1-t41 <--this one from this post
http://forum.xda-developers.com/showthread.php?t=1255790
i used odin, tar file, no repart
auto reboot, reset time and PDA
now is not booting up just says sgsii and yellow triangle,
duendeskt said:
well well well i already brick my phone
installed Speedmod k1-t41 <--this one from this post
http://forum.xda-developers.com/showthread.php?t=1255790
i used odin, tar file, no repart
auto reboot, reset time and PDA
now is not booting up just says sgsii and yellow triangle,
Click to expand...
Click to collapse
Just download this CF-root file for KK1: http://download.chainfire.eu/66/CF-Root/SGN/CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.zip
And then put your phone into download mode and flash that CF-root file using Odin. It should boot up after. Don't worry.
As long as you don't flash a pit file and you don't tick repartition, we can still save it easily.
Sleepycat3 said:
Just download this CF-root file for KK1: http://download.chainfire.eu/66/CF-Root/SGN/CF-Root-SGN_ZS_MUL_KK1-v5.0-CWM5.zip
And then put your phone into download mode and flash that CF-root file using Odin. It should boot up after. Don't worry.
As long as you don't flash a pit file and you don't tick repartition, we can still save it easily.
Click to expand...
Click to collapse
thank you, i downloaded this file u gave me, and installed with odin,
with this optins:
autoreboot freset.time pda and the file
now when im trying to boot it shows pixel by pixel until the screen is full white.
if i try volume up power up and center key it shows pixels too.
if i try odin mode, volume down its still working and still reconigzed by odin. what should i do? im tryin this
http://forum.xda-developers.com/showthread.php?t=1457458
the bad part is than some files are in multiupload which is not working right now.
guys, you know what, i put back the speedmod kernel file and it allows me to enter recovery and download only,
is there a process to save my ass using cwm recovery? aaaaaaaaaaaa im scared thanks
duendeskt said:
guys, you know what, i put back the speedmod kernel file and it allows me to enter recovery and download only,
is there a process to save my ass using cwm recovery? aaaaaaaaaaaa im scared thanks
Click to expand...
Click to collapse
Better you flash a stock now,
go to sammobile.com and find a suitable stock firmware and also download Odin flash guide from the same site and read carefully and flash.
then you find Matching CF-root kernel
thanks god with unsecure kernel and odin my phone is back again,
i was so pissed tried so many methods, even downloaded from samsfirmware the stock custom rom and it only gave me one md5 file...
so, thank you very much, reading helps a lot, now i know how to brick my phone with the unuseful cfroot kk1 5.0 version... speedmod kk1 version doesnt works too.

[Q] Firmware how to

I'm new, so excuse me if I haven't found the post to this question if it's already asked?
I've just downloaded: I9300XXBLFB_I9300OXABLFB_BTU.zip.torrent and have unzipped it to I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5
I think I have to flash this via Odin? Right?
What version of Odin do I have to use therefor?
Does anyone know if this firmware will work with an unbranded device of the Galaxy S III used in Germany?
Thank you for reading and replying. May the force be with you.
thommesborg said:
I'm new, so excuse me if I haven't found the post to this question if it's already asked?
I've just downloaded: I9300XXBLFB_I9300OXABLFB_BTU.zip.torrent and have unzipped it to I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5
I think I have to flash this via Odin? Right?
What version of Odin do I have to use therefor?
Does anyone know if this firmware will work with an unbranded device of the Galaxy S III used in Germany?
Thank you for reading and replying. May the force be with you.
Click to expand...
Click to collapse
Odin 3.0.4, you find it on www.sammobile.com. This rom is for Germany for unbranded devices http://www.hotfile.com/dl/161535135/b148800/I9300XXALF6_I9300DBTALF4_DBT.zip.html.
The rom you downloaded is probably for the UK.
Thank you
Thanks a lot, I've just forgotten to have look at the SamMobile page. Yeah, and I got the Odin3 v3.04.
Do I need to do a wipe before or after I flash my device?
Regards, Thommes
thommesborg said:
Thanks a lot, I've just forgotten to have look at the SamMobile page. Yeah, and I got the Odin3 v3.04.
Do I need to do a wipe before or after I flash my device?
Regards, Thommes
Click to expand...
Click to collapse
Go in recovery and do a data/factory reset and wipe cache. Then pull the battery and wait 15 seconds. Reinsert battery and go in downloadmode and flash the rom (.tar or md5) in the PDA section. Do not tick any option, only f.reset.time and autoreboot should be ticked.
More thanks
gee2012 said:
Go in recovery and do a data/factory reset and wipe cache. Then pull the battery and wait 15 seconds. Reinsert battery and go in downloadmode and flash the rom (.tar or md5) in the PDA section. Do not tick any option, only f.reset.time and autoreboot should be ticked.
Click to expand...
Click to collapse
Two simple words: More thanks
Regards, Thommes
thommesborg said:
Two simple words: More thanks
Regards, Thommes
Click to expand...
Click to collapse
Glad it helped

installed cwm instead of rooting first onto a clean sgs2 ..i need help please?

hi
SHORT VERSION
installed cwm via odin onto sgs2 then cf root after.
phone goes into recovery and cwn but wont boot. (boots to logo then goes off)
i have original stock rom and .dll files
scared to flash through odin using .pit with .dll
LONG VERSION
ok let me slap my self round my own head.
i should of known better as i have rooted and installed cwn
so many times before but on this occasion i blame tiredness and
people yapping in my ears.
what i have did was to installed cwm onto a new 4.0.3 sgs2 phone via odin (pda then start)
then after noting my mistake i tried to boot the phone. it boot to logo screen then switch off.
i decided to cf root it with odin (again only pda and start) but again the phone boots to logo and triangle
then goes off.
maybe im in good luck the phone goes into recovery mode and cwn but wont boot.
i have the stock rom files that i downloaded
1, I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
2. SS_DL.dll
with the above files i thought i could use the .PDA and ss_dl.dll for the .PIT in odin but im not 100%
sure since i do know that IT usage in odin will mess up the phone.
please can some one help me out thanks
HTCdia
.dll is not a .pit file...
thanks ctomgee
im glad i didn't go ahead because that .dll should of been a .pit
the strange thing is i downloaded from Samsung site lol.
can you make suggestions as to how best to proceede. thanks
HtcDia said:
hi
SHORT VERSION
installed cwm via odin onto sgs2 then cf root after.
phone goes into recovery and cwn but wont boot. (boots to logo then goes off)
i have original stock rom and .dll files
scared to flash through odin using .pit with .dll
LONG VERSION
ok let me slap my self round my own head.
i should of known better as i have rooted and installed cwn
so many times before but on this occasion i blame tiredness and
people yapping in my ears.
what i have did was to installed cwm onto a new 4.0.3 sgs2 phone via odin (pda then start)
then after noting my mistake i tried to boot the phone. it boot to logo screen then switch off.
i decided to cf root it with odin (again only pda and start) but again the phone boots to logo and triangle
then goes off.
maybe im in good luck the phone goes into recovery mode and cwn but wont boot.
i have the stock rom files that i downloaded
1, I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
2. SS_DL.dll
with the above files i thought i could use the .PDA and ss_dl.dll for the .PIT in odin but im not 100%
sure since i do know that IT usage in odin will mess up the phone.
please can some one help me out thanks
HTCdia
Click to expand...
Click to collapse
Do not use the .pit file unless you understand 100% what you're doing, as its one of the easiest ways to brick your device.
I have a few questions before I can help you.
Can you get into download mode?
- If you can go to www.sammobile.com, download a stock firmware, flash through odin. If it still doesnt boot, try to wipe data/factory reset through 3e (stock recovery), then try to boot again.
-- After you do that, flash a cf-kernel to root the device.
does odin support .md5 file i have in the pda ..... man im really getting gittery
thanks
kilometers4 said:
Do not use the .pit file unless you understand 100% what you're doing, as its one of the easiest ways to brick your device.
I have a few questions before I can help you.
Can you get into download mode?
- If you can go to www.sammobile.com, download a stock firmware, flash through odin. If it still doesnt boot, try to wipe data/factory reset through 3e (stock recovery), then try to boot again.
-- After you do that, flash a cf-kernel to root the device.
Click to expand...
Click to collapse
thnaks kilometers4
1, yes i can get into download and cwm
2, the recovery i got is cwm..... 3 buttons vol key up
the stock file i have is I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but know im worried about the .md5 at the end
ill be back later with a progress since sammobile takes long to download if you dont have a paid account
tnaks
Yes, you can flash .md5 files in Odin.
That file is a single package and should contain everything you need. Flash via Odin in the PDA section. Don't touch anything else.
Also. You are SURE you have an i9100, right?
HtcDia said:
thnaks kilometers4
1, yes i can get into download and cwm
2, the recovery i got is cwm..... 3 buttons vol key up
the stock file i have is I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but know im worried about the .md5 at the end
ill be back later with a progress since sammobile takes long to download if you dont have a paid account
tnaks
Click to expand...
Click to collapse
Don't worry about the .md5. It should flash the same.
But I would try to start over completely and download a firmware from www.sammobile.com.
Sent from my GT-I9100 using xda premium
ctomgee said:
Yes, you can flash .md5 files in Odin.
Click to expand...
Click to collapse
thanks again..... ok i popped over to http://www.sammobile.com/firmware/ logged in
i can only see 5 firmwares there and onoe for sweden.
so im gonna risk it for the biscuit lol ..... and run my I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
through odin using just using pda and start. ...... here goes my friend 4000kr (kr=Krono) mobile phone.
ill be back shortly with the results lol
thanks
kilometers4 said:
Don't worry about the .md5. It should flash the same.
But I would try to start over completely and download a firmware from www.sammobile.com.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i can understand the logic but i have click on both of the firmware buttons on the site but cannot see i9100xxlpq
ill check there again before going straight for odin
tnaks
HtcDia said:
i can understand the logic but i have click on both of the firmware buttons on the site but cannot see i9100xxlpq
ill check there again before going straight for odin
tnaks
Click to expand...
Click to collapse
You also have to choose device, then operating system, then device model, then region.
lol thanks alot it worked
that saved me a few 1000kr to buy my friend a new phone
ctomgee and kilometers4
------------------------------------
i ill suggest this i can donate something to you guys as a
appreciation for your time and knowledge, i can do this for
the end of month when i get paid.
you guys saved me more than money. you guys saved my respect too
thanks
HtcDia said:
lol thanks alot it worked
that saved me a few 1000kr to buy my friend a new phone
ctomgee and kilometers4
------------------------------------
i ill suggest this i can donate something to you guys as a
appreciation for your time and knowledge, i can do this for
the end of month when i get paid.
you guys saved me more than money. you guys saved my respect too
thanks
Click to expand...
Click to collapse
Don't worry about it dude, at least for me. I don't answer questions for donations; I just like helping people. That's why I don't have a donate link on my profile.
ctomgee said:
Don't worry about it dude, at least for me. I don't answer questions for donations; I just like helping people. That's why I don't have a donate link on my profile.
Click to expand...
Click to collapse
Yeah, don't worry about it. I'm not doing it for money
Sent from my GT-I9100 using xda premium
ok im sorry, i hope i didnt offend any of you
and i really appreciate this.
much thanks and respects for your characters.
your integrity's are worth its weight more than diamonds and gold
till next time
HTCDIA

[Q] I9300 is stuck on white samsung screen, Help please!

I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium

Categories

Resources