This is just a placeholder!
Car Charger
Anyone bought a car charger for the SGP5 that charges? I discovered not all micro USB chargers are created equal. I have a .7A wall charger that came with my Galaxy Player, and a .7A wall charger than came with my Optimus-V. Both say 5V with micro USB. The Optimus charger won't switch the Galaxy Player to charging (just keeps discharging). The car charger I have for my Optimus works fine on the phone, but also does not charge the Player.
Does Samsung have an extra wire or two in their chargers? Just want to buy a good car charger for the Samsung (and don't want to have to return it). This is my Optimus charger: http://www.amazon.com/Retractable-C...2C0W/ref=sr_1_1?ie=UTF8&qid=1324098638&sr=8-1
I think I might order this for my Player: http://www.amazon.com/Professional-...7?s=electronics&ie=UTF8&qid=1324098713&sr=1-7
Anyone have one they know works in a car?
These look like nice cases, still just preorder.
http://www.rearthusa.com/Galaxy-Player_c_121.html
iJimaniac said:
These look like nice cases, still just preorder.
http://www.rearthusa.com/Galaxy-Player_c_121.html
Click to expand...
Click to collapse
I do have one of them (the aqua black color) it's the best case I have owned. It's sillicon but it's not sticky because its a mix of sillicon and TPU.
It looks like their status has gone from preorder to selling. I was going to post the Amazon link but I don't have enough posts to add links. Search Amazon for Rearth Ringke Galaxy Player
zaclimon said:
I do have one of them (the aqua black color) it's the best case I have owned. It's sillicon but it's not sticky because its a mix of sillicon and TPU.
Click to expand...
Click to collapse
Coincidentally I just received the Riot Outfitters case today. It is a MINIMAL case. No protection for the top and bottom corners. About all it does for me is make it a bit easier to hold the device. With your thumbs up of that Rearth case, I'm going to order one of them.
eiko969 said:
Coincidentally I just received the Riot Outfitters case today. It is a MINIMAL case. No protection for the top and bottom corners. About all it does for me is make it a bit easier to hold the device. With your thumbs up of that Rearth case, I'm going to order one of them.
Click to expand...
Click to collapse
This is where I bought my case. It has all the colors. It is from korea so except the hole on the top. You can take express shipping if you want:
http://www.exportprive.com/en/search?orderby=position&orderway=desc&search_query=samsung%20galaxy%20player&submit_search=&p=2
zaclimon said:
This is where I bought my case. It has all the colors. It is from korea so except the hole on the top. You can take express shipping if you want:
Click to expand...
Click to collapse
Cool, thanks!
Can you elaborate on "So except the hole in the top"?
What hole does it have or not have?
(thinking about it for my galaxy player 4.0)
Also..
Re: car chargers..
I recently bought a car charger for my original nook,
that plugs into the lighter, and the USB plugs into that.
I tried it on my Galaxy Player, and it works great!
Got it from Barnes n Noble for like $20+ish.
Really want to get a case for this though. lol
I just got the Zagg InvisiShield for the screen, and its awesome stuff.
Perfect fit to.
Now to protect the rest...
Rasa11 said:
Cool, thanks!
Can you elaborate on "So except the hole in the top"?
What hole does it have or not have?
(thinking about it for my galaxy player 4.0)
Also..
Re: car chargers..
I recently bought a car charger for my original nook,
that plugs into the lighter, and the USB plugs into that.
I tried it on my Galaxy Player, and it works great!
Got it from Barnes n Noble for like $20+ish.
Really want to get a case for this though. lol
I just got the Zagg InvisiShield for the screen, and its awesome stuff.
Perfect fit to.
Now to protect the rest...
Click to expand...
Click to collapse
Well the korean version of the galaxy players have a DMB antenna (for the TV) so the case needs an hole for the antenna. (you'll dont notice it at all after a few use with it.)
zaclimon said:
Well the korean version of the galaxy players have a DMB antenna (for the TV) so the case needs an hole for the antenna. (you'll dont notice it at all after a few use with it.)
Click to expand...
Click to collapse
Ahh, Ok, Cool!
Sounds good. Thank you.
Hi,
I originally got the gel case I mentioned here:
http://forum.xda-developers.com/showthread.php?t=1389081
I got one of Riot cases for Christmas, from my family (a little early ), and although I didn't really like it, because of the lack of protection mentioned above, I was obliged to try it.
That lasted for about a day, then I went back to the gel case.
The main reason was that I noticied that when I played some games in landscape, the games were constantly going to "resume". I'm guessing that it was because the Riot case doesn't provide much isolation at the bottom edge when in landscape, and between the metal band around the SGP5, and the narrow bezel area between the edge and the capacitative screen, it was causing this.
So, I switched back to the gel case, and the problem's gone.
I also got a cheap protector when I bough the gel case off of Ebay, and I was obliged to try a Zagg protector (again, for Christmas). That lasted even less time than the Riot case.
I really hated the tackiness of the Zagg protector, especially when doing things on the screen that required smoother movement. With the Zagg protector, my finger kept jumping/skipping, esp. when I played games. I did some googling, and this seems to be a common complaint with the Zagg protectors.
So, I'm back to the cheap Ebay protector also.
Just my observations...
Jim
When I first installed the zagg shield,
I also thought it was more "tacky" than it should be.
Wasn't sure about it for the first couple days.
But now it's been on there for a week or so,
and it's really no different now than when the shield was off.
Not tacky anymore, fingers not jumping or skipping,
and i just glide across it nicely, just as i did the original screen.
So, while the zagg shield was questionable to me for a few days after installing it..
It really does work quite nicely now!
Nice and smooth/slick just like the actual screen.
I bought this car charger, just go it, works well: http://www.amazon.com/Professional-...7?s=electronics&ie=UTF8&qid=1324098713&sr=1-7
Bought this "case" that fits great and feels good: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=180741214943&ssPageName=ADME:L:OC:US:1123 I bought it in black and you barely see the white around openings (none on front), I also sand-blasted it to remove the glossy it has on one side, still has the nice 2 tone effect but now matte and super-matte.
Bought this "Sleeve" that is very functional (and protective): http://www.amazon.com/AmazonBasics-...GEOQ/ref=sr_1_1?ie=UTF8&qid=1325036022&sr=8-1
Bought this screen protector that goes on easily and looks good, but scratches easily: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=270845080394&ssPageName=ADME:L:OC:US:1123
(would not buy this again)
woohoo
Yes! Got my case today!
Ordered it 3 days ago, and just got it, and it fits perfectly!
Very happy/impressed with it!
Now Im "fully" protected.
Zagg shield on the screen and Ringke/Rearth case over the rest.
Niice!
Here is the one I got.. $19.
http://www.ebay.com/itm/Samsung-Gal...118878?pt=PDA_Accessories&hash=item416074741e
will post a pic of it later.
-pics added. lol
tcat007 said:
Bought this "case" that fits great and feels good: http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=180741214943&ssPageName=ADME:L:OC:US:1123 I bought it in black and you barely see the white around openings (none on front), I also sand-blasted it to remove the glossy it has on one side, still has the nice 2 tone effect but now matte and super-matte.
Click to expand...
Click to collapse
How does that fit?
there's no holes/ports for the speakers?
or does the 5.0 have only one speaker in the front, on the opposite side?
Looks cool, but doesnt have the proper holes, at least not for my 4.0
edit: nevermind..
I see that the 5.0 does indeed have different placements. mybad
@rasall, how much thicker does it make it? Is it really worth $20 for a silicone case? It does look nice, but my device seams thick enough already without a case. Also ghost armor now has screen protectors for the galaxy players, fyi.
iJimaniac said:
@rasall, how much thicker does it make it? Is it really worth $20 for a silicone case? It does look nice, but my device seams thick enough already without a case. Also ghost armor now has screen protectors for the galaxy players, fyi.
Click to expand...
Click to collapse
Not much thicker at all.
I just measured it with the case on and it's still only 2.5 inches across from side to side.
It really was worth the $20, for me anyway.
$20 to add some decent protection to a $240 device , I find worth it.
As Im sure you know..
there are not really a whole lot of cases out there yet for these players..
So one that fits perfectly, adds protection, and gives it some extra grip, is worth it to me.
It also makes it feel super nice!
Like it gives it some more 'stability''.... er something. lol
I'm not aware of "ghost armor" ,
But I have a Zagg invisishield on and I love it. Perfect fit, and one of the best quality materials Ive seen.
Plus, it has a lifetime guarentee.
If it gets damaged, they replace it for free.
Ghost-armor is a screen protector similar to zagg but uses static cling rather than adhesive and is therefore reusable if you have to take it off. From what I have seen they are pretty much indestructable (I saw someone demonstrate by grinding his iphone 4s across diamond plated steel - not so much as a hairline scrach!). You can also get nice looking carbon fiber skins. They also have lifetime warranty. They are pretty expensive, though ($25-30), and my $2 xtreme guard from ebay is working great, so I guess I'll wait.
iJimaniac said:
Ghost-armor is a screen protector similar to zagg but uses static cling rather than adhesive and is therefore reusable if you have to take it off. From what I have seen they are pretty much indestructable (I saw someone demonstrate by grinding his iphone 4s across diamond plated steel - not so much as a hairline scrach!). You can also get nice looking carbon fiber skins. They also have lifetime warranty. They are pretty expensive, though ($25-30), and my $2 xtreme guard from ebay is working great, so I guess I'll wait.
Click to expand...
Click to collapse
How is the xtreme guard? I have the cheap clear guard LCD screen protectors from eBay, and they scratch and attract fingerprints too easily. I wanted to get the xtreme guard, but I was afraid they would be tacky and sticky to touch because they are the kind that need water to install. So are they tacky like zaggs?
klin1344 said:
How is the xtreme guard? I have the cheap clear guard LCD screen protectors from eBay, and they scratch and attract fingerprints too easily. I wanted to get the xtreme guard, but I was afraid they would be tacky and sticky to touch because they are the kind that need Waterloo to install. So are they tacky like zaggs?
Click to expand...
Click to collapse
It was a bit of a pain to install correctly, but not to bad if you use soapy water. It was really hard to use the first couple days, but after a while it broke in and is smooth as can be. It is exactly like zagg, so if you don't like zagg it might not be for you, but it isn't sticky at all to me. If you scratch it, it just goes away after some use, pretty nice for how cheap it is. One more thing - the rear protector is absolute junk, if you can get just the front protector without the back, do so.
Related
Think there will be cool silicone covers and unique cases for the Touch HD similar to the iPhone? One thing about my Touch Pro and Tilt I have is they don't make silicone covers due to the slide out keyboard. On rare occasions I've dropped my Tilt on asphalt and scratched it bad.
Just want a good protector for a 1000 dollar phone when it comes out.
Would appreciate any info or rumors of accessories coming out..
Thanks
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Seidio case for the HD?
I wonder if there will be a Seidio case for the Touch HD, as I'm very satisfied with the one I have for my TyTn II (it literally saved it's life)
tboy2000 said:
What about those invisible shields? They are transparent stickers essentially that cover the entire phone. I think it would be better to have that as it protects the phone from scratches and still leaves the cool uncased form factor. I saw one on my friend's iphone. Looked fine.
Click to expand...
Click to collapse
I will also buy an invisible shield for my HD when i have it, it's more beautiful than the silicone covers.
Temporary Silicone Solution
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
Here is a temporary silicone solution I've been using. Be careful as its a snug fit.
http://www.target.com/Incase-Protec...49637?ie=UTF8&index=target&rh=k:incase&page=1
galaxys said:
haven't heard of anything yet. But, some of the iphone accessories might fit since they are almost identical in size...
Click to expand...
Click to collapse
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
It seems there is one sold here
http://bluetrade.eu/index.php?page=product&id=13413
but they are out of stock !!!
Matterhorn said:
I'm using a black Belkin silicone case meant for an iPhone 3G. I had to cut a hole for the camera and the headphones. It fits, but not too tight. I think it will hold me over until the official HD models hit the market.
Click to expand...
Click to collapse
Sounds Like a good idea any chance of some close up pics so we can see how good it fits?
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
http://cgi.ebay.co.uk/Crystal-Case-...300|66:2|65:12|39:1|240:1318#ebayphotohosting
Or a hard case?
cheap price...i ordered a silicone case until something better comes along.
yeah I also ordered silicone one, I think it protects the glossy frame well
HD Cases
Check here for cases, cheap prices and fast delivery (to Greece approximately 1 week from Hong Kong)
And now they do have silicone and crystal cases
We r in Luck!!!!!!!!!!
http://cgi.ebay.co.uk/Silicone-Case-...1|240:1318
Enjoy...........
Click to expand...
Click to collapse
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
dadeluna said:
What means? There are not especially covers for HD !!!!!!!
Found at NetTask.
Thanks to ktsak
Click to expand...
Click to collapse
It's http://www.netimes.com/shop/htc-dopod-touch-hd-t8282-blackstone-c-80_612.html
Enjoy !!!!!!!!!!
What do you think about the original silicon case from HTC (HTC Touch HD Silicon Case SC S420)?
https://www.htcaccessorystore.com/ee/p_htc_item.aspx?i=176956
You think it would fit together with the leather case I am getting from digitec.ch?
http://www.digitec.ch/ProdukteDetails2.aspx?Reiter=Bilder&Artikel=159942
Ascenca
looks nice, but not available until next year... i don't want to wait; i'd rather protect now with something cheaper an purchase HTC's version later.
My silicon arrived from ebay today. Package contains the case, a replacement screen protector (which I will not use - waiting for invisishield) and a useless neck strap (useless in that there is no strap loop on the case!).
The case itself fits easily, makes the Hd easier to hold in the hand, and makes me much less scared of dropping it.
Of course, now I have introduced a new surface into the equation, the propensity for scratches via this method increases. However, the fit is pretty good and I certainly prefer this to having the paintwork exposed all the time.
thedaddyy said:
http://cgi.ebay.co.uk/Silicone-Case...14&_trkparms=72:1300|66:2|65:12|39:1|240:1318
Enjoy...........
Click to expand...
Click to collapse
One of these came today. It is specifically for the THD. The fit is good the cut outs in the right place and the buttons sound and off operable through the rubber.
At £3.49 It will do for now.
Hi all,
searching for an invisible, thin protection film for my Topaz I found this website
http://www.gadgetshieldz.com/htc-to...s-screen-protectors-covers-cases-shields.html
It is exactly the same shield you might know from other manufacturers, but look at the price: 6.99 and free shipping included!
To make it short: Delivery was fast, the product is excellent (I have one of those expensive ones on my iPod so I can compare), and the installation is very easy. They even have an explaining video on their website.
I can recommend this product to everyone.
Greetz
ottoben
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
MasK said:
Hehe.. the fact that they refund to whoever who posts reviews abt them online...
wondering if these reviews are genuine or not.
No offence ottoben.. I'm just thinking out loud. I got my Shieldz too.. Pics here:
http://forum.xda-developers.com/showpost.php?p=4116914&postcount=194
Click to expand...
Click to collapse
It's ok to me to say what you think. But I really think their product is as good as the much more expensive ones and that's what I wanted to share. BTW I dit not apply for the refund...
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Ordered now - lets see when it turns up and if it's any better than the InvisibleShield...(that was rubbish tbh)
adesonic said:
I have these too, and have found them excellent, however, the screen protector part is a little too "rubbery" for my taste - I feel that my fingers don't slide about as easily on the screen, therefore, I use the gadget shieldz for back and sides of the device and the standard HTC screen protector on the front - gives me best of both worlds IMHO
Click to expand...
Click to collapse
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
My feedback for gadget shieldz
MasK said:
Yup.. exactly. I tested my friend's Cruise too, with the screen covered with it too. Totally unacceptable for me on the screen. Using a stylus makes it much worse.. so I applied it on the back only.
My friend's Cruise apparently had Invisible Shield.. and I think the rubbery-ness is about the same. I do however feel that GadgetShieldz has less wavy effect, thus, it looks better
Price-wise.. forget IS. Ya don't need the fancy packaging, spray bottle or a card. GS is worthit.
Click to expand...
Click to collapse
After seeing Mask post from another thread on the matt cover, i had order and using gadget shieldz now...
I had Invisiable shield on my previous Diamond 1.
Overall, i feel gadget shield is thinner than Invisiable Shield.... better feel, less rubbery....
but on gadget shield seems easier to be srcatch or stretch...
i had some stretch mark when i try hard to push the air bubbles.
This stretch marks is ugly as it is on the front screen area....
Just have to be extra careful during application of the shield
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
You mean 2mm smaller than the device? I though that's normal..
I only applied at the back, so it's not a problem for me..
so does anyone who has tried out invisibleshield have problems with it not fitting perfectly because if it doesn't have problems I might buy one.
Gadgetshieldz
Hi all,
Just got my Gadgetshieldz this morning. The instructions are pretty good, easy to follow. However, for the pieces that fold over the sides, they don't stick well. The plastic is too rigid and won't fold and stick. I ended up with only the front screen and the backing done. I couldn't be bothered with the sides as they were too fiddly and weren't a perfect fit anyway. The opening near the speaker on the right wouldn't stick properly and am currently sitting hte phone on its side hoping that portion would stick when its dry. Overall, Gadgetshieldz looks like a good cheaper alternative to Invisible shield, (I tried tearing apart the smaller strips and they were quite robust) but usage on the diamond is really average. From what the others have said, I will most likely be tearing off the screen protector and buying another replacement if there is too much traction. Will make another post when it dries.
Cheers.
Jeremy
Gadgetshieldz
supreme_one333 said:
I also got the gadget shield, but my main problem is that it is about 2mm off on all sides. So I have small gaps between the pieces. Does invisible shield have the same problem?
Click to expand...
Click to collapse
I concur on this one. I just installed Gadgetshieldz on the weekend. The battery cover portion has unsightly gaps at the top. The strips that are meant for the sides are way short and I didn't even bother applying them. Am probably gonna strip off the protection sheet and stick to a soft plastic case. They are a bit chunkier but more rigid than the silicone versions.
To anyone who gets air bubbles under screen protectors; URDOINITRONG.
Ensure the surface of both the device and the protector are COMPLETELY dust free; The smallest particle of dust, fluff, or hair will make an air bubble a good 3 or 4mm in diameter.
Other than that, ensure the edges line up straight and roll down from one side to the other. Seempulz!
I'd recommend GadgetShieldz.com.
£3.00 delivered and does the job well.
dg
I bought one as well and fits perfectly. But installation made me crazy some pieces are too small for my fingers
Gadgetshieldz is looking like a great option to me..Ordering one now..Will see how it goes.
I just purchased the LTE version off eBay and I'll be needing a case and screen protector for it.
For the screen protector, I just want the plain 99-cents-for-3-pack type ones - no fancy wet application ones, or ones that give it a rubbery feeling, or that will peel and wear due to how thick they are, etc. And for some reason, I'm having trouble finding them - which is funny because its usually the oppsoite.
For the case, I'd like something that's still compatible with the official charge dock. From what I understand there's an adapter included to make it work with cases, but I still don't want anything bulky - I don't drop my phones, I just need protection from everyday wear. A plain slim snap on case would do - big plus if its legit bamboo/wood on the back (not cheap plastic or skin); nothing that covers the buttons, though, as I like their tactile feel.
Suggestions?
magus57 said:
I just purchased the LTE version off eBay and I'll be needing a case and screen protector for it.
For the screen protector, I just want the plain 99-cents-for-3-pack type ones - no fancy wet application ones, or ones that give it a rubbery feeling, or that will peel and wear due to how thick they are, etc. And for some reason, I'm having trouble finding them - which is funny because its usually the oppsoite.
For the case, I'd like something that's still compatible with the official charge dock. From what I understand there's an adapter included to make it work with cases, but I still don't want anything bulky - I don't drop my phones, I just need protection from everyday wear. A plain slim snap on case would do - big plus if its legit bamboo/wood on the back (not cheap plastic or skin); nothing that covers the buttons, though, as I like their tactile feel.
Suggestions?
Click to expand...
Click to collapse
Ehm... pretentious much?
JK man, I guess you'll have to wait a bit more for more options to come when the handset is available worldwide.
In the meantime, you could check cases from PDAir, they seem like real premium ones, leather too.
Anyway, you can find simple screen protectors off eBay for 2/3 bucks for 3, but I went premium even there and bought the Gearmaxxx one off eBay, like 20 bucks for front+back.
Sent from my GT-I9300 using Tapatalk 2
fastest83 said:
Ehm... pretentious much?
JK man, I guess you'll have to wait a bit more for more options to come when the handset is available worldwide.
In the meantime, you could check cases from PDAir, they seem like real premium ones, leather too.
Anyway, you can find simple screen protectors off eBay for 2/3 bucks for 3, but I went premium even there and bought the Gearmaxxx one off eBay, like 20 bucks for front+back.
Click to expand...
Click to collapse
To be fair, I think the guy I bought it from is a fraud and doesn't actually have them. Haven't received any communication from him since the 5th, even though I left a note upon purchase. Thank goodness I used Bill Me Later, I'm not actually out of that huge amount of money until I can cancel the transaction (if it comes to that).
And yeah I went ahead and got these two sets of screen protectors, plus this clear case for now:
http://www.ebay.com/itm/121159453538
http://www.ebay.com/itm/121167852672
http://www.ebay.com/itm/121160352193
Figure I'll give it a shot using the matte screen protector and see how I like it, and go clear if I can't take the loss in quality. And I'm considering the Incipio Watson since I do like their folio cases, but I'm not sure how I feel about having it on a phone (only had it on a tablet) and with no kickstand support.
Can I get some feedback please?
It stands between these two screen protectors
*Benks Magic HR
http://www.ebay.co.uk/itm/SONY-XPER...AU_MobilePhoneAccessories&hash=item3a83b0fa09
or
Nillkin Crystal Screen Protector
http://www.ebay.co.uk/itm/Brand-New...ting_LaptopAccessories_RL&hash=item3f28333559
I'm looking for that glass feeling on the film when I'm using the phone. I had a screen protector like this on my SGS2 but I can't remember the name of the product. I don't want this rubbery feeling or the feeling that there actually is a screen protector there.
Edit: I ordered the *Benks Magic HR
http://www.ebay.co.uk/itm/SONY-XPER...AU_MobilePhoneAccessories&hash=item3a83b0fa09
Edit again: I missread the title as I was looking for the Magic HSR not the HR
http://dx-box.com/magic-hsr-hd-anti...ctive-film-for-sony-xl39h-xperia-z-ultra.html
hoping to get a refund and cancel my order
So Poetic has some new cases due to come out on October 30th according to Amazon. They look very nice and are definitely my style of case.
Here they are:
Turtle Skin: http://www.amazon.com/Nvidia-Shield...869&sr=8-6&keywords=nvidia+shield+tablet+case
Revolution: http://www.amazon.com/Nvidia-Shield...69&sr=8-15&keywords=nvidia+shield+tablet+case
Personally considering the Turtle Skin case as the ability to use your stylus as a kickstand is great. Not sure why the Revolution version has most of the speakers covered. (Unless those spots they cut out are the only areas where sound is coming out?)
What do you guys think? I'll be updating this post with the Turtle Skin case as soon as I get it.
No speaker holes.
I was looking at those the other day and couldn't figure out why the frig they covered up 90% of the speaker ports.
Kind of makes dual forward facing speakers a moot point? Someone in the final approval dept. needs to get off the crack and look at the way it actually works lol.
Poetic is great. Ive had 3 tablets prior to the shield and used poetic cases for them all. These are terrible cases compared to the ones Ive used before. I cant bare to think of how hot the k1 will get in these beasts.
uuang said:
Poetic is great. Ive had 3 tablets prior to the shield and used poetic cases for them all. These are terrible cases compared to the ones Ive used before. I cant bare to think of how hot the k1 will get in these beasts.
Click to expand...
Click to collapse
Yeah I was a sucker and paid way too much for the Shield tablet cover, but after using it and playing the k1 optimized games I know why they went with the open back design with minimal contact points. It would be awesome to find a silicone bumper or something to still fit the tablet but a fully covered back on the shield is not a great idea if you actually use it for gaming IMO.
Pre-ordered a revolutions case.
As for the speakers if you play around covering up the grills you'll notice that where poetic have put their holes is actually where the sounds comes out the most.
Has anyone tried the turtle case yet? I had ordered the Revolution back in Oct but was not one of the ones to get the first shipment so I canceled it and went with a flip cover case. However for normal day to day use the flip cover case is kind of annoying and I'd like to switch to an open face case like these.
Just got one of these puppies and want to see the REVOLUTION case in action. Can anyone please post pics? Tia!
Finally got my Poetic case just before christmas. Here are some pictures and a video I made.
Poetic 1 by MIKEYMC1, on Flickr
Poetic 2 by MIKEYMC1, on Flickr
Poetic 3 by MIKEYMC1, on Flickr
Poetic 4 by MIKEYMC1, on Flickr
Poetic 5 by MIKEYMC1, on Flickr
Poetic 6 by MIKEYMC1, on Flickr
Wow the case looks BOSS!! Thank you so much for pics and video.
I'm thinking about the revolution case myself. Does the built in screen protector affect the stylus performance?
Sent from my 831C using Tapatalk
lacrossev said:
I'm thinking about the revolution case myself. Does the built in screen protector affect the stylus performance?
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
for me it did. I think it might had more to do with the fact that I already had an illumishield cover.. I didn't really care much for the built in screen protector, considering it kept giving that oily look, like in the pics above. Anyways, with both the illumishield and built-in protector, the touch sensors was wonky, especially when using the stylus. And since I liked the non oily look of the illumishield, I just basically hacked away the built-in screen protector. as far as the case though? it's pretty awesome..
Ah ok, i didn't notice that it was the soft type screen protector that does that oily crap cuz i was on mobile when i saw the photos. I also like to provide my own screen protector and just use the frame, thanks.
My poetic case is coming in today. I had the thought of doing the same thing as the other guy. Cutting off the protector of the poetic and installing my own screen protector.
With the built in protector only the stylus works fine. Don't like the weird oily looking effect though and probably will remove it also.
Now I've used it for a while there are things I really don't like about it. The buttons are really hard to press now, I might try to mod it to make it better. The port cover will probably get cut off as it doesn't stay in after being left on charge over night. The stand is a nice feature but poorly done, only one angle option and its not a good one. Would be good to have some sort of incremental angle options and to lock into place.
But the protection the bulky case provides cannot be denied.
ooBONGoo said:
for me it did. I think it might had more to do with the fact that I already had an illumishield cover.. I didn't really care much for the built in screen protector, considering it kept giving that oily look, like in the pics above. Anyways, with both the illumishield and built-in protector, the touch sensors was wonky, especially when using the stylus. And since I liked the non oily look of the illumishield, I just basically hacked away the built-in screen protector. as far as the case though? it's pretty awesome..
Click to expand...
Click to collapse
That was the dirst thing I did when I got mine. I've never really liked the built in screen protectors, they all seem poor compared to combining the case with a nicer screen protector. Use tempered glass + Otterbox on my M8, and an illumishield + poetic on the shield. Not a huge fan of the buttons, but it's stil the best and basically only choice for a hard case.
just wondering, anyone here has cracked edges problem?
I read it like almost everywhere on the nvidia forum... and ppl there are.. kinda nasty. most of the things discussed there is not constructive...
So I had a mixed experience with the Poetic Revolution case.
tl: dr Poetic need to make a SlimLine range for the Nvidia Shield Tab so it can be oriented in Landscape and Portrait.
I had to shave off the locking lugs that stow the stand so I could easily deploy and stow the stand. I also had to cut into the flap so it would return to the covered position. The material that Poetic chose to use for the rubberized flaps is different to the SlimLine range of cases, and is less flexible.
I also had an issue with the kickstand hinge lugs breaking off and I had to request a new case.
The new case is better than the first one. The stand will deploy much easier now, and the rubberized material *eventually* returns to it's original position. It still doens't close immediately after you have unplugged headphones or the charging cable, but it gets there eventually.
jaredmorgs said:
So I had a mixed experience with the Poetic Revolution case.
tl: dr Poetic need to make a SlimLine range for the Nvidia Shield Tab so it can be oriented in Landscape and Portrait.
I had to shave off the locking lugs that stow the stand so I could easily deploy and stow the stand. I also had to cut into the flap so it would return to the covered position. The material that Poetic chose to use for the rubberized flaps is different to the SlimLine range of cases, and is less flexible.
I also had an issue with the kickstand hinge lugs breaking off and I had to request a new case.
The new case is better than the first one. The stand will deploy much easier now, and the rubberized material *eventually* returns to it's original position. It still doens't close immediately after you have unplugged headphones or the charging cable, but it gets there eventually.
Click to expand...
Click to collapse
What procedure did you use to get a replacement for broken kickstand? I agree with your experience, pretty much the same issues here. Still like the case but hinge and hard to press buttons.
jasonpctech said:
What procedure did you use to get a replacement for broken kickstand? I agree with your experience, pretty much the same issues here. Still like the case but hinge and hard to press buttons.
Click to expand...
Click to collapse
I just used their web site contact form. If you are in the states, you won't need to pay the postage fee. I had to, because I'm in Australia.
Right on, they asked for Order number & picture of damaged region and my address. The new case has already been shipped no need to return the defective old one either. Thanks for your tip.
Hi all,
it would be nice if we could compile a list of the accessories we're happy with.
I'll start with the official case. It's really snug and feels good in your hand, and (as opposed to the official case of the original Swift) it doesn't crack when you look at it crossly Really happy with it, endorse it without reserve. (You need to like flashy orange, though )
EDIT: this one: https://www.pdashop.be/product/759010/wileyfox-swift-2-swift-2-plus-back-cover-oranje.html
Okay so for the cases:
My device came with the official one (in grey color), and after a month or so the power button came off, it didn't seem very strong at first and I knew that was going to happen at some point. Still, not disappointed with it but I didn't feel like it was "protective enough".
So, I went ahead and bought this one https://www.amazon.co.uk/WileyFox-Olycism-Shock-Absorption-Resistant-Transparent/dp/B06XG78G9B/ which came yesterday, and it definitely feels more safe now. Official case feels too plasticky for me, and I've always been a fan of this gummy style of cases. The cutouts for buttons and I/O are perfect, and align perfectly with the device. It doesn't feel too much thick either, so it's definitely a plus. It has a bezel protecting the screen in case the phone falls to the floor, so yeah. I don't regret spending 6 bucks on it in sale.
I can provide pics of any of both, if someone needs it.
I've got a clear one of these http://www.ebay.co.uk/itm/132114205792 , which seems to look very similar to the case shared by linuxct . Fits well and cut outs are good.
Need to buy some screen protectors soon..
Sent from my Swift 2 using Tapatalk
I got one of these:
amazon.de/Abacus24-7-Handyh%C3%BClle-Kreditkarten-Schutzh%C3%BClle-Smartphone/dp/B01MTY0YJY/ref=sr_1_3?s=telephone&ie=UTF8&qid=1493056844&sr=1-3&keywords=swift+2+abacus
It fits good and the possibillity transport debit cards or paper money without a wallet is nice. Unfortunately the seam dissolves a litte bit but that can beficed with a fire lighter or a drop of superglue.
r.lepecha said:
I've got a clear one of these http://www.ebay.co.uk/itm/132114205792 , which seems to look very similar to the case shared by linuxct . Fits well and cut outs are good.
Need to buy some screen protectors soon..
Sent from my Swift 2 using Tapatalk
Click to expand...
Click to collapse
linuxct said:
Okay so for the cases:
My device came with the official one (in grey color), and after a month or so the power button came off, it didn't seem very strong at first and I knew that was going to happen at some point. Still, not disappointed with it but I didn't feel like it was "protective enough".
So, I went ahead and bought this one https://www.amazon.co.uk/WileyFox-Olycism-Shock-Absorption-Resistant-Transparent/dp/B06XG78G9B/ which came yesterday, and it definitely feels more safe now. Official case feels too plasticky for me, and I've always been a fan of this gummy style of cases. The cutouts for buttons and I/O are perfect, and align perfectly with the device. It doesn't feel too much thick either, so it's definitely a plus. It has a bezel protecting the screen in case the phone falls to the floor, so yeah. I don't regret spending 6 bucks on it in sale.
I can provide pics of any of both, if someone needs it.
Click to expand...
Click to collapse
Are they snug enough? I bought one that looked like these on e-bay for my original Swift, and it wasn't really tight enough. Just tight enough in fact to remain on the phone, but it felt quite loose.
Anyone know a good fitting tempered glass screen protector for the 2X? Al the ones I found are too big (edges don't curve down) and don't stick very well.
Wileyfox themselves have just released a screen protector for the swift 2x I've just ordered one. I've tried loads bought off eBay and had refunds for all of them as the fit has been terrible.
I bought a soft screenprotector from Screenknight. Fits very well and is smooth (after I peeled the protection layer off haha). I don't like the soft feeling, but it's better than an ill fitting tempered glass one.
I'm just gonna order the one on Wileyfox's site and report back when I receive it.
- Edit -
I received the screenprotector.
Good quality and very easy to apply.
After application you see a little oily residue under the screen. I hope that will disappear after a while.
Cool thing is that the logo on the bottom is shiny, so it's more visible than the dark logo.
I too got one of the Wileyfox screen protectors for the swift 2x it has the slightly oily look underneath it too. I thought it was a fault and got a replacement but the second one is the same. It does seem the best fit out of all the ones I've tried so far. The oily look is only visible when the screen is off. I do have a screen knight but have never applied it as I didn't fancy getting the phone wet.
Another one here with the slimy look under the screen protector. Fits nicely and like already said, looks nice too.
Got one of these as a case
https://www.amazon.co.uk/gp/product/B071LDGHTQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Awful. Looks smooth in the piccys but the back has quite sharp edges.
This was the reply from Wileyfox about the "oily" screen protector issue.
"Other than making sure your screen is clean and then reapplying the screen protector there isn't much else I can suggest I'm afraid."
Not a big problem anyway.
Dropped my phone on a sand path with pebbles. My screenprotector flew off. Cracked.
Not a scratch on my screen or case
Been walking around without screenprotector since. The screen is much more responsive compared to with the screenprotector.
I think I'm gonna leave it like this. If my screen breaks, I just get it repaired or get a new phone.