I have CWM v5 newly installed. I immediately ran a backup with it and all went well. Now, a little later, I've been looking into CyanogenMod and wanted to tiny baby steps so I was nice and confident with things.
I tried to do another backup from CWM and it said it couldn't mount /sdcard. I tried to restore and the same error. Rebooted a few times and it's the same still.
I booted normally and checked with a standard file manager and /sdcard was fine. I haven't changed anything since the time it was working but I still seem to have broken things
What can I do?
EDIT: Actually, since getting CWM on the device, I have played a little with ADB commands and replaced the bootanimation.zip. Everything works when the phone is booted normally so that can't have caused it. Can it?
You really like new threads eh?
I presume you don't have a physical micro SD card, and you've changed kernels again at some point. Now the sdcard mentioned in newer CWM recovery is the external_sd, which you don't have. Use the internal SD card option.
oinkylicious said:
You really like new threads eh?
I presume you don't have a physical micro SD card, and you've changed kernels again at some point. Now the sdcard mentioned in newer CWM recovery is the external_sd, which you don't have. Use the internal SD card option.
Click to expand...
Click to collapse
I love them I do search before hand to see if there are similar threads relating to my device but because there aren't, I thought making a new thread per issue would be helpful. I can keep it all in this thread though if that's the etiquette around here though.
I used kTool to flash the zImage from the link you pointed out in my last thread, that gave me CF-Root v5 and CWM. I haven't changed anything since that point so if it worked once, I don't understand why it won't work again. You have confused me about the sdcard/external_sd. I have a card in the device, and everything normally saves to /sdcard but there's also /sdcard/external_sd which is always empty. I also see /sdcard/usbStorage where I have put some files too, but I don't really understand the naming conventions.
As I said, look for the "internal sd card" option in CWM recovery.
I'll add a bit more in the hope you don't need to keep posting.
If you don't have a physical micro SD card in your phone and you try to use any of the "install/backup/restore to/from sdcard" in newer versions of CWM recovery, it will give an error about being unable to mount /sdcard. Also, as far as I know, /sdcard/usbStorage refers to USB OTG, so unless you've got a USB OTG cable and a memory card/HDD plugged in, you shouldn't be writing files to that location.
Backed up successfully to internal sdcard, although I wasn't able to restore from it first which I don't understand because there should be the original one from earlier somewhere.
Turns out I was wrong, I don't appear to have a card in that SD slot even though I could swear there was one. And I can create files/folders in /sdcard/external_sd/ so I give up, lol.
EDIT: Nope, just the normal USB that came with the phone. I created the files/folders directly in the phone when I tested it.
Related
Here's my issue: I wanted to start with a fresh "slate" for flashing a custom ROM (I originally had TRIGGER+OVERSTOCK). I backed up my apps/settings and the current ROM, disabled the Voodoo lagfix and unrooted the phone. Then, I ODIN'd back to JFD. At this point I downloaded TitaniumBackup and ROM Manager. When I tried to mount the Internal SD card, nothing happened...just the external card mounted. I went back and checked my ODIN settings an noticed that I had left the "Re-Partition" box checked. Freaking out at this point, I then went ahead and rooted the phone, and checked the file system through the Super Manager app. All my data was still there!!! So I went ahead and used ADB to "pull" the TB and ROM Manager data onto my computer just in case. My question is: how do I get the internal SD card to mount correctly?? Any help would be HUGE!!! Thanks in advance for everything!
Oryon007
I can't really tell by your post, are you trying to mount your external sd onto your phone or onto your computer?
I have Odin'ed to JFD with repartition checked many times, and have never had your problem. If I were you, I would just go through and Odin again using a different JFD image (maybe you just had a bad flash, what version of Odin were you using?) As long as whatever you are flashing with Odin contains all the essential bits, repartitioning should not do anything too deadly to your phone. (I learned this the hard way, do not try to Odin and repartition with JI6, for example, because JI6 has no dbdata image included).
If you just want to troubleshoot your current install, check the "/etc/vold.fstab" and "/etc/vold.conf". I can't actually tell you what those two files should look like as I am currently running a 2.2.1 rom (I think the files should differ between versions of the OS, but I'm not sure).
I am a pretty big Linux and Android noob, but I'm pretty sure that those two files are responsible for mounting both sdcards onto your phone, at least partially. (I would have no idea where to look to fix it if it isn't mounting onto your computer.)
Sorry if any of my advice is off, like I mentioned a little earlier, I am a pretty big noob, albeit very interested in Android.
Sorry for the confusion....I'm attempting to mount my internal SD to my computer. As far as ODIN is concerned, I'm using 1.7 with the flash files from this post:
http://forum.xda-developers.com/showthread.php?t=734475&highlight=stock+odin
I've used this ODIN flash before without any issues, so I'm still a bit stumped on why I can't mount my SD card. I can see the entire file system from within my phone as well as through ADB, but (for whatever reason) cannot mount it to my PC. I am leaning towards the issue of the SD card being partitioned wrong. Any thoughts? Any ideas on how to repartition the internal SD back to "stock"? Thanks again for any help provided!
-Oryon007
That's actually the same JFD image I use. I would just use Odin to flash JFD again with the repartition checkbox checked. I'm pretty sure that that will solve your problem.
Make sure you use the pit file too, without that you will have serious issues if you are repartitioning.
I'll try this again, just in case I missed something the first time...wish me luck!! I'll let you know how this turned out, too!
-Oryon007
Alright, good luck. Did you use the pit file when you originally flashed JFD and repartitioned? Not using that file may have been why you had this problem.
Ok...so, no change with the internal SD. When I attempt to mount the SD cards to my PC, the only one that shows up is the external one. After unmounting them, I can still see both cards with filesystems. Could the internal SD have been partitioned incorrectly? If so, how do I get it repartitioned right?
EDIT: I did use both original files from here...
Okay, I'm sorry but I have no clue how to help you. Are you sure its not just your computer? You may have to try and get help from somebody more knowledgeable than me. Have you tried flashing any other rom through Odin over JFD?
Not yet...I wanted to make sure that it wasn't something that I was doing incorrectly through ODIN. Again, my ultimate goal in all this was to have a "clean slate" to install a custom ROM on; the catch I'm running into is that I can't mount the internal SD card to place the files on to flash through CWM, even though I can see all the files through the phone and through ADB. *sigh* Thanks for your help though! It's always nice to have help when you run into these issues...
EDIT: After trying to ODIN JI2 files, I get the following error upon boot of the phone in Recovery:
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
Click to expand...
Click to collapse
Look at what I said at the end of the second paragraph, on the second post in the parentheses.
EDIT: Just flash a rom using Odin that does have a dbdata file. You probably checked repartition while flashing JI2.
Last night I was having a similar problem. While I wasnt flashing back to stock or anything, I could only get G: (external sd) to mount to my pc but not the F: (internal storage). Eventually I disabled USB Debugging, plugged in the USB cable from the pc, and it gives you 3 options for USB Mode: Kies, Media Player, Mass Storage. Once I selected mass storage, both internal and external sd cards mounted to the PC with no problem. Just remember to re-enable USB Debugging after.
Finally got it!!
Finally found the issue!! Only took me a week....lol
Going to manage my disk drives found that my PC wanted to assign a drive letter that was already assigned to a mapped network drive. *duh* Obviously not going to work. Reassigned the drive letter and voila!! I can mount my internal SD card!! w00t!!
That's really terrible and hilarious at the same time. Why wouldn't windows just pick another letter to map it to?
I don't have an SD card in my phone, but when I go to an app like Aldiko(book reader) and try to access a file, I'm able to explore higher level directories than normal. When I first browse for a file I'm in the area that my phone calls internal storage, but if I go one level higher I see that its actually mounted under the name SD card... What's going on? Why does this app see it as an SD card and why is it mounted as an SD card?
just like the samsung galaxy s phones, the 16gb internal storage is considered 'sdcard' to the system. your external sd is called sd-ext i believe
Wait, so if a tutorial says something will be written to your SD card, should you assume internal storage if you don't have one and external if you do have one? I was looking at the tutorial here: [it won't let me post the link because I'm a new user... google this and its the first result: "how to fully backup and restore your android"]
and it said "This image will be written to your SD card which you are then free to copy around and back up on your computer."
well. this phone isnt like a lot of other android phones. like the galaxy S line, there is more onboard storage than what prior phones had. a lot of the older phones came with 512mb/1gb/2gb/4gb of onboard storage that the OS resided on, and you had to add an sdcard to give yourself enough storage for music/pictures/backups/etc
i suspect you will see a lot more of this same thing in the future as flash memory gets cheaper and cheaper, and manufacturers begin putting more and more storage on board.
as for your link, you do realize that the atrix isnt like ANY of those other phones listed as examples?
nandroids dont work quite the same with the atrix
Pirateghost said:
as for your link, you do realize that the atrix isnt like ANY of those other phones listed as examples?
nandroids dont work quite the same with the atrix
Click to expand...
Click to collapse
I did not realize that. I'm an expert with apple but a n00b with android. So you're saying I shouldn't use that guide? Any other suggestions to backup then?
gsingh2011 said:
I did not realize that. I'm an expert with apple but a n00b with android. So you're saying I shouldn't use that guide? Any other suggestions to backup then?
Click to expand...
Click to collapse
you cannot flash CWM recovery on the atrix like you can a lot of other devices (for which that article was written for)
http://forum.xda-developers.com/showthread.php?t=1019143
I'm having some trouble with that. I'm going to continue with this question in this thread even though the topics changed, let me know if you want me to make a new thread.
The first thing I did after installing the CWM recovery for the atrix app was click the install recovery button. It said install successful. I assume this made a backup image of my phone's ROM. Then I clicked recovery mode and I tried booting holding the down key and selecting fastboot. I also tried some other options like RSD... I think I'm missing something though because the screen just got stuck on the "starting fastboot" line and I had to remove the battery each time it gets stuck to reboot it.
I'm trying to get files (my photos mostly) off the internal storage of my Vibrant. I don't care about getting the Vibrant working again, just getting my files off it. I can get into recovery mode, but mounting usb storage *does not work*, even tried unplugging and replugging the phone but no dice. I can install zips from the sd card (though it takes 5x longer than normal) but any ROM I install, stock, cyanogen, slim, etc. won't actually finish booting.
Because USB mounting doesn't work, I'd like to use CWM to copy all the files on the internal storage to the sd card. Then I can put the sd in another computer and get the files off. In CWM I can do a backup to sd, but that doesn't backup photos, just the rom. Is there a way to generally copy files from internal to the sd using CWM?
Also, the entire time I'm in recovery mode my PC makes the sound for a usb device being connected and then disconnected, assume that has something to do with the Vibrant being generally busted.
In summary:
Trying to recover files from vibrant phone storage
Can't boot any regular ROM
Can get into CWM recovery
USB mount in CWM recovery *does not work*
Can install zip from sd card
Can backup to sd card
Have a spare working vibrant for charging battery
Any ideas?
Okay I'll see if I can help any. First of all, can you successfully use Odin to return to stock firmware? Have you even attempted using Odin?
Can try using recuva or there is another one too but the XDA search is missing right now. Moped_Ryder usually recommends that one that I can't remember right now, but once the search button is back, I'll let you know what it is. Works like a charm. Droid recover or Droid Files, ahh I can't think of it but there is a solution on here somewhere.
Try a program called Android Commander.
Ive transferred files in CWM with it all the time.
Agreed with android commander. It has always worked for me. There are other solutions too with these new kernels these days. You can download Devil kernel or subzero via PC(They both include new file manager in recovery).Put it on your external card, flash, reboot back into recovery. Mount your internal and external cards from mounts and storage menu. Go to file manager and copy/paste away.
I have tried various kernels and CWM versions but, over the last week, I haven't been able to get any version of CWM to flash zips stored on the internal memory. I select the zip, there is a short pause, then it goes back to the top level menu of CWM. I know it isn't the zip file being corrupt because, on more than one occasion to confirm, I have copied the zip which fails directly over to the external memory stick using USB mount in CWM and it then flashes fine from that.
Anyone else have this issue? It doesn't seem to effect any other aspect of the phone that I can see, every OS I flash boots fine and the internal memory can be copied to/from and examined either from a mount on a PC or applications like Root Explorer.
So no one else has had this issue?
Pagnell said:
So no one else has had this issue?
Click to expand...
Click to collapse
Have you tried to format your SD?
Sent from my GT-I9300
Yup, formatted my internal SD card with no effect.
Strange to see this thread has been given a single star by someone when it's hardly an unreasonable question. Some people really are a bit odd.
Wanted to pull this out of the newbie thread, not because it doesn't belong there (i'm certainly still an XDA newb) but because hold IRC-chat is it hard to keep up with all those posts...guess I'm too much of a noob for the newbie post?
TL;DR:
My TF700T has TWRP functioning, but no Android OS installed. Unfortunately TWRP doesn't seem to recognize anything in the USB/SD card ports. See below for what I've tried.
Full Story:
I was trying the whole new ROM on my tablet (ASUS TF700T) thing. I have the recovery part setup just fine TWRP, but I made the foolish mistake of wiping the ENTIRE internal storage, including my backup.
Certainly not a good start, but easy enough to put the new image (I was going for crombie-kk) on an SD card & load from that, except for my problem.....
TWRP doesn't seem to notice my SD Card (or USB) storage devices. It lists "external storage" as one would expect, but it's always 0MB and no files, regardless of whether a device attached. I know the devices are good, and I know the USB & SD card ports were working the day I started the rooting/romming process--so i'm reluctant to think they coincidentally died that exact day.
I've tried SD cards (both full & micro) in both SD card slot & USB port, as well as USB sticks of varying sizes. I've even tried various file formats on these storage devices, but I can't get anything other than 0MB.
Any advice on how to get SOMETHING, ANYTHING, on my device? Obviously a custom ROM is the goal but even if I could go back to a stock device--at least the external storage would work and I could go from there!
Thanks for the help in advance
coatmaker618 said:
Wanted to pull this out of the newbie thread, not because it doesn't belong there (i'm certainly still an XDA newb) but because hold IRC-chat is it hard to keep up with all those posts...guess I'm too much of a noob for the newbie post?
TL;DR:
My TF700T has TWRP functioning, but no Android OS installed. Unfortunately TWRP doesn't seem to recognize anything in the USB/SD card ports. See below for what I've tried.
Full Story:
I was trying the whole new ROM on my tablet (ASUS TF700T) thing. I have the recovery part setup just fine TWRP, but I made the foolish mistake of wiping the ENTIRE internal storage, including my backup.
Certainly not a good start, but easy enough to put the new image (I was going for crombie-kk) on an SD card & load from that, except for my problem.....
TWRP doesn't seem to notice my SD Card (or USB) storage devices. It lists "external storage" as one would expect, but it's always 0MB and no files, regardless of whether a device attached. I know the devices are good, and I know the USB & SD card ports were working the day I started the rooting/romming process--so i'm reluctant to think they coincidentally died that exact day.
I've tried SD cards (both full & micro) in both SD card slot & USB port, as well as USB sticks of varying sizes. I've even tried various file formats on these storage devices, but I can't get anything other than 0MB.
Any advice on how to get SOMETHING, ANYTHING, on my device? Obviously a custom ROM is the goal but even if I could go back to a stock device--at least the external storage would work and I could go from there!
Thanks for the help in advance
Click to expand...
Click to collapse
If I understand your problem corectly you have to go into Recovery and mount your sd card first.
I'n not sure where in the TWRP recovery exactly is but there is surely a menu 'mount'.
In there you have to mount your sd card first.
Hope it solve your problem.
XlapatsaS said:
If I understand your problem corectly you have to go into Recovery and mount your sd card first.
I'n not sure where in the TWRP recovery exactly is but there is surely a menu 'mount'.
In there you have to mount your sd card first.
Hope it solve your problem.
Click to expand...
Click to collapse
I should have mentioned that. I have tried mounting (under the "mount" menu), it lists "Micro SDcard" as an option, but won't select (it just flashes & stays unchecked) when I attempt to select it.
Thanks for pointing that out though.
See if you can adb push a rom zip to the internal storage.
es0tericcha0s said:
See if you can adb push a rom zip to the internal storage.
Click to expand...
Click to collapse
Sorry, not entirely clear what you mean, could you explain in a little more detail or link to a guide or something? Thanks!
coatmaker618 said:
Sorry, not entirely clear what you mean, could you explain in a little more detail or link to a guide or something? Thanks!
Click to expand...
Click to collapse
Read these about adb push:
http://forum.xda-developers.com/showthread.php?t=1598027
http://forum.xda-developers.com/showthread.php?t=1667929
XlapatsaS said:
Read these about adb push:
http://forum.xda-developers.com/showthread.php?t=1598027
http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
I don't think I can, "adb devices" or "fastboot devices" does not seem to see my table, when it is attached to the computer. I went to "Mount" --> "ADB Sideload" so the tablet is "listening" for the adb push....but as I said, adb.exe cannot see my tablet
So did I brick this tablet beyond repair?
Is there anything I can do?
What about factory reset?
HALP!
And thanks, for everything I've gotten so far and hopefully everything to come.
Factory reset won't help in this situation at all.
http://www.transformerforums.com/fo...irmware-tf700-tf300-tf101-possibly-tf201.html