Hello,
So far, I have:
A working Android build environment (Ubuntu 11.10 x64).
Managed to build, install and boot AOSP on my Nexus S. (I have downloaded but not attempted to build CM7 yet.)
Created a Github account.
Samsung's open source files for my target device, the Galaxy Gio GT-S5660M.
I've read some documentation and forum posts about Github, but I remain unsure as to what I should do to fork in a way that:
I'll be able to keep on syncing the remainder of the code.
My new device directories and modifications could be brought back (pulled?) to the main CM7 code base.
Will avoid needless frustrating re-downloads of the source code.
Thanks in advance,
Darkshado
After some further reading, I'm beginning to grasp some git basics...
I've forked two CM7 repos so far, added them as remotes in the appropriate installations. (Instead of forking and cloning, since I already had repo sync'ed the whole CM7 source. My commits show up on Github like they should, and I should be able to merge in commits to the origin remotes.)
I'm not going to do any pull requests until I've managed to build and boot.
By the way, yesterday I attempted to build AOSP with a bunch of files overwritten by the Samsung sources (that's how they tell you to do it!!) and this failed, as I expected.
Goodbye,
Darkshado
Update: I'm currently trying to port CM7 to the Gio 5660M. Still attempting a first successful build as I'm writing these lines.
My main issue so far has to do with the camera. I get the following error message:
make: *** No rule to make target « out/target/product/gio5660M/obj/lib/libcamera.so », needed by « out/target/product/gio5660M/obj/SHARED_LIBRARIES/libcameraservice_intermediates/LINKED/libcameraservice.so ». Stop.
After toggling off the camera by using the stub, I hit the same error further into the build with this:
make: *** No rule to make target « vendor/samsung/gio5660M/proprietary/wifi/ath6k/AR6003/hw2.0/athtcmd_ram.bin », needed by « out/target/product/gio5660M/system/wifi/ath6k/AR6003/hw2.0/athtcmd_ram.bin ». Stop.
I know this has to do with makefiles, but that's about it...
Thanks in advance for any help,
Darkshado
hi i'm interested too.
hi I found your github because I also interested poriting cyanogemod to galaxy gio korea(SHW-M290K). the device hardware is different from s5660. so I need some modification.
and your libcamera problem is that there is some reason that the make system can't find libcamera.so, so they cannot compile libcamera service. it should be in ./vendor/samsung/gio/proprietary according to your extract-files.sh .
have one cuorisity. I searched gio android device make file. and none of them are relreased source code. how did you make them?
I found this information. it may help you.
http://processors.wiki.ti.com/index.php/TI-Android-GingerBread-2.3.4-DevKit-2.1_PortingGuides
I'll have to update my Github, hadn't been in a rush due to lack of progress, but now my problem lies with libaudio instead.
I got the Samsung sources for the 5660M on their open source website, although I mostly worked with the CM7 ports for similar devices like Tass and Cooper as well as a Gio source provided by Phiexz but it didn't build either.
Thanks for the link, I'll check it out.
proprietary does not help
do you have any progress since last time?
well, I admit that proprietary files does not help.
does your s5660m hardware identical to s5660v?
becasuse galaxy gio in Korea(shw-m290k,shw-m290s) does different hardware.
well in this case, like me, you need to hack into not only android pdk, but also android kenel.
I have seen that phiexz has released kernel with latest cyanogenmod kenel in his github and I am modifing it to shw-m290k. there are some hardware differences i have to apply to.
I suggest you to compare phiexz's kernel and samsung original kernel from samsung opensource homepage.
My problem right now is that I don't have that much spare time to put into this, and that I'm very much learning as I go, so progress is not always that quick. Also, I'd like to get my Touchwiz based ROM updated and working properly before trying to build AOSP or CM again.
Another thing I want to try is building the kernel (probably based on Phiexz's) that will support ext4, and compare performance of the Touchwiz ROM on ext4 versus RFS.
As far as we can tell, GT-S5660 (Europe/Asia) GT-S5660M, L and V are identical except for the radio firmware. People with the 5660M initially encountered issues after flashing 5660 ROMs because they also contained the AMSS image.
my cyanogen kernel is based on samsung open source kernel
because cm-kernel on cyanogenmod github dont support our device, if we wnt use that kernel we must add some hardware pofile & board for galaxy gio
so alternative is make samsung's open source kernel compatible with cyanogenmod
Wouldn't it be much better from a code maintainability standpoint to make the CM kernel work on the Gio? (Also if you ever hope to get official CM team support, that's a given.)
The way I understand repo and git, you could create a github repo for your device and board configs and add those to your repo manifest so the whole CM7 source and your modifications all sync properly.
I've forked the CM7 manifest files off github, added my gio files and removed all those extra devices I didn't need, so my repo syncs are much faster too. (The idea comes from http://slightlymorethanworthless.blogspot.com/2011/05/remove-unwanted-devices-from.html)
hey a quick question...
just starting out here..
i'm on win7 32 bit, going to run ubuntu on virtualbox.
shud i choose ubuntu 32 bit or 64?
sorry for OT.
doesn't really matter
roofrider said:
hey a quick question...
just starting out here..
i'm on win7 32 bit, going to run ubuntu on virtualbox.
shud u choose ubuntu 32 bit or 64?
sorry for OT.
Click to expand...
Click to collapse
doesn't really matter. but compiling process needs much cpu power. so 64x would be better.
Well, im not a dev or a user of gt5660m, but good luck to you, hope u can finally port it
Sent from the GUN in my pants
darkshado, if you have same problem untill now.
http://strazzere.com/blog/?p=220
look this page. and check out koush's proprietary page. especially for samsung cooper(galaxy ace). because many of kernel procedure are same for gio.
https://github.com/coolya/android_device_samsung_cooper.git
https://github.com/koush/proprietary_vendor_samsung
i've upload galaxy gio source + proprietary files for galaxy gio
please see & help to fix some problem
github.com/phiexz
Darkshado said:
Hello,
So far, I have:
A working Android build environment (Ubuntu 11.10 x64).
Managed to build, install and boot AOSP on my Nexus S. (I have downloaded but not attempted to build CM7 yet.)
Created a Github account.
Samsung's open source files for my target device, the Galaxy Gio GT-S5660M.
I've read some documentation and forum posts about Github, but I remain unsure as to what I should do to fork in a way that:
I'll be able to keep on syncing the remainder of the code.
My new device directories and modifications could be brought back (pulled?) to the main CM7 code base.
Will avoid needless frustrating re-downloads of the source code.
Thanks in advance,
Darkshado
Click to expand...
Click to collapse
Really the best kernel for your phone is here:
http://forum.xda-developers.com/showthread.php?t=1991020
BLN enabled, optimized&stable kernel, jelly bean look
Whoa! Zombie thread!
Dude: the ROM you linked was published over a year after my original post in this thread. I'm pretty sure there was NO CM7 build available for the Gio back then. That's what I was trying to work on, but got beat to the punch by Maclaw and a couple others. (Hard-bricking my Gio and having a sluggish laptop to build on didn't help.)
Besides, I got rid of my Gio a long time ago. I enjoy my Note 2 and keep my Nexus S as backup.
Hey Guys,
My Android lacks development, the only ROMs availible are just apk mods and build.prop edits. I am planning to build CM or some other AOSP-based ROM for my Phone. I found the source code for Qualcomm phones at CodeAurora: https://www.codeaurora.org/xwiki/bin/QAEP/WebHome
My Android runs 2.3.5 and the ro.product.board is msm7627a.
The problem is, there are 2 Gingerbreads for my msm7627a... "gingerbread" and "gingerbread_chocolate". And if I select one of them, I am presented with tons of other options.
I have built software from source in Ubuntu but something tells me that Android is completely different. Can somebody please point me in the right direction? After I find my device's source code, how will I use it to port CM?
And Mainly, which one is my Android's?
Note: I have attached the build.prop of my Rooted Stock ROM.
Hi guys.
I'm trying to port Clockwork mod to my device, but all the tutorials i've seen online uses cyanogen source that is already configured for their devices and just compiles it, which isn't porting per se.
I'm having trouble syncing the Cyanogen source, not sure what i'm doing wrong.
I have the android source and sdk tools on ubuntu 14.04.
Hi. I am having xiaomi redmi note 3(kenzo). I know a bit of java and c languages. I want to build android rom from scratch for kenzo. Not from the cyanogenmod, but from the google's source code. I need help finding proprietary binaries and tools required. I have installed ubuntu on vmware workstation 12 and done everything stated in "Downloading Source" section of source.android.com page. I need help in finding proprietary binaries and a little bit of assistance in making the rom bootable. I am no way building the rom from cyanogenmod sources, because i know i will end up building a nightlie of cm at max. please help. Thank you.
Hey guys . I'm new to Android development...but i have a good idea about developing a custom rom and kernel using ubuntu..
But one day i was thinking that,
everyone who are interested in rom development goes through the AOSP website and tries it. And atlast after so many confusions and so many new learnings they compile it..
Bug fixing and adding features is next job.... Let's keep it aside
My thought was to build a software using java or c++ , which will automatically compile the rom for any device according to the user's input.
The inputs are device's code name (eg:-hammerhead)
And type of os(lineage based or aosp based etc...)
In the background of this software, all the rom compiling codes, source downloading codes, setting up environment codes etc,.. will be feeded using c++ or java.
After getting inputs from the user via a simple interface, the process will start. Downloading source, choosing directory,compilation, and finally the flashable rom will be the output of this software which will be stored in the given directory folder...
What do u guys think about this. Will this work???
i also know there are many troubles making this software
Pls comment abt ur thought guys..
I also need help in this case..
My vote is for is for a interactive GUI for android kernel development. One to allow easy modification to the kernel source and compilation. Kinda like Link+ Kernel Ide for Eclipse but for android