I have terrible reception on my phone.
I want to flash a new radio but I'm not sure which one to flash
I'm running CM7 and switch between that and MIUI roms.
I don't want to flash the wrong one. Can someone guide me in the right direction??
Thank you.
You can look here for radios. But you should read as much as possible before flashing a radio.
http://forum.xda-developers.com/showthread.php?t=1193101
Also try updating your profile and prl and see if that helps. Or try a data reset.
Hope this helps
Locked & Loaded
""shooter on Deck""
laie1472 said:
You can look here for radios. But you should read as much as possible before flashing a radio.
http://forum.xda-developers.com/showthread.php?t=1193101
Also try updating your profile and prl and see if that helps. Or try a data reset.
Hope this helps
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
So there's no way to flash a radio for the people who have hBoot 1.50?
arozer said:
So there's no way to flash a radio for the people who have hBoot 1.50?
Click to expand...
Click to collapse
correct. I suppose it is possible, but no one has figured it out yet.
Agreed.. I don't think us HBOOT 1.5 guys can flash radios yet. Another thing to try, if you haven't already, would be to install the Open Signal app. It'll give you your radio signal strength in dbm and even plot your current tower's position on a map. Great app although it is a bit of a resource hog with all of its radio polling.
arozer said:
I have terrible reception on my phone.
I want to flash a new radio but I'm not sure which one to flash
I'm running CM7 and switch between that and MIUI roms.
I don't want to flash the wrong one. Can someone guide me in the right direction??
Thank you.
Click to expand...
Click to collapse
You might do better to flash a PRL. Safer and can lead to better signal without even changing the radio. Lots of people on here think they know it all and will tell you the PRL only affects roaming signal, but dont listen to them as they probably havnt tried changing PRLs and have no idea what they are talking about. Flashing PRL 00001 fixed my signal at my apartment by connecting me to the Verizon towers without being on Roaming mode. And 01337 gave me a little bit better signal in my apartment over 00001, even though I dont appear to be connected to Verizon towers anymore. Lots of people really like 11115 and I am going to try that next as it should be the best for signal since it uses both Sprint and Verizon towers equally and gives full 3G on either company's towers.
To flash a PRL you will need to be on a Sense ROM that has the extended EPST.apk installed. Put a PRL you want on your SD card, dial ##775# and put in your MSL code. From there you just select which PRL you want, press menu and then commit changes. Reboot and your good to go.
EniGmA1987 said:
You might do better to flash a PRL. Safer and can lead to better signal without even changing the radio. Lots of people on here think they know it all and will tell you the PRL only affects roaming signal, but dont listen to them as they probably havnt tried changing PRLs and have no idea what they are talking about. Flashing PRL 00001 fixed my signal at my apartment by connecting me to the Verizon towers without being on Roaming mode. And 01337 gave me a little bit better signal in my apartment over 00001, even though I dont appear to be connected to Verizon towers anymore. Lots of people really like 11115 and I am going to try that next as it should be the best for signal since it uses both Sprint and Verizon towers equally and gives full 3G on either company's towers.
To flash a PRL you will need to be on a Sense ROM that has the extended EPST.apk installed. Put a PRL you want on your SD card, dial ##775# and put in your MSL code. From there you just select which PRL you want, press menu and then commit changes. Reboot and your good to go.
Click to expand...
Click to collapse
Actually my friend, I appreciate you trying to help me but in this case I will help you out.
I did tho PRL trick a year ago on my regular Evo. About 4 months later, I received a letter from Sprint stating that "even thou roaming is free on sprint, due to the overage roaming that I have used, they will terminate my services if my habits don't change in a month." Well I tried my best to change them but i guess they weren't satisfied and terminated my services. I had to call and beg and go on a 90 probation period where if I went over the limit by even 1min/mb, they you disconnect me. So I'll never do prl again. Instead, I downloaded this app called Roam Control and only use it when i'm waiting for an important phone call.
Radio on the other hand is a signal from Sprint and will not put you into roaming.
Aren't the radios loaded in the RUU? Can't you just run that and then unlock again with htcdev?
KB112 said:
Aren't the radios loaded in the RUU? Can't you just run that and then unlock again with htcdev?
Click to expand...
Click to collapse
Well, I am not entirely certain that the radio is loaded into an RUU. Someone recently told me that the RUU would not change the radio version of your phone.
The thing is,the Hboot 1.5 folks cant revert to a pre HBoot 1.5 via RUU anyhow, so no one can try it. And while there are two RUU's available to Hboot 1.5 people. (2.08.651.2 & 2.08.651.3) They both have the same radio. So I can't run one over the other to compare radio versions before and after the RUU. Once a new update gets pushed with a different radio version, I could run the RUU to see if the radio flashes with it.
The one way I would think it is possible to switch radios is to re-lock the device, run an RUU to unroot, then accept an OTA to get an updated radio. Once you take the new radio via OTA, you would use HTC unlock again to unlock, flash a custom recovery, flash the SU binary and voila.
This of course is contingent that HTC doesnt backtrack on their unlocking promise. If you took an OTA and the new update is unable to be unlocked via HTC, you would be screwed. So we would want to make sure that they dont push an update that they wont support with the HTCDev tool. And of course the other flaw to this is that you can only "upgrade" the radio and never revert to a prior radio that you may have liked better.
EniGmA1987 said:
You might do better to flash a PRL. Safer and can lead to better signal without even changing the radio. Lots of people on here think they know it all and will tell you the PRL only affects roaming signal, but dont listen to them as they probably havnt tried changing PRLs and have no idea what they are talking about. Flashing PRL 00001 fixed my signal at my apartment by connecting me to the Verizon towers without being on Roaming mode. And 01337 gave me a little bit better signal in my apartment over 00001, even though I dont appear to be connected to Verizon towers anymore. Lots of people really like 11115 and I am going to try that next as it should be the best for signal since it uses both Sprint and Verizon towers equally and gives full 3G on either company's towers.
To flash a PRL you will need to be on a Sense ROM that has the extended EPST.apk installed. Put a PRL you want on your SD card, dial ##775# and put in your MSL code. From there you just select which PRL you want, press menu and then commit changes. Reboot and your good to go.
Click to expand...
Click to collapse
Enigma, Can you tell me if Sprint charged you a ETF when they initially cancelled your service? I'm kind of looking for a way out of my contract and was hoping this might actually do it.
snowmobiledog said:
Enigma, Can you tell me if Sprint charged you a ETF when they initially cancelled your service? I'm kind of looking for a way out of my contract and was hoping this might actually do it.
Click to expand...
Click to collapse
What makes you think Sprint cancelled my service? Cause they didint.
EniGmA1987 said:
What makes you think Sprint cancelled my service? Cause they didint.
Click to expand...
Click to collapse
Well I tried my best to change them but i guess they weren't satisfied and terminated my services.
Click to expand...
Click to collapse
I guess it was this sentence which led me to believe that.
I didnt ever say that though, that was some other guy. I cancelled my service by myself about 7 months after this post because I moved to Verizon since I was using their network all the time anyway. Sprint service is just too ****ty in my area. And not just cell/data coverage either, but text problems on their network were the worst I have ever seen. But I never had any problems from Sprint about data usage or things like that. The person who said Sprint contacted them about roaming usage must have been using multiple gigabytes of data each month, I normally only use 500MB-1GB at most unless I am tethering something.
EniGmA1987 said:
I didnt ever say that though, that was some other guy. I cancelled my server by myself about 7 months after this post because I moved to Verizon since I was using their network all the time anyway. Sprint service is just too ****ty in my area. And not just cell/data coverage either, but text problems on their network were the worst I have ever seen. But I never had any problems from Sprint about data usage or things like that. The person who said Sprint contacted them about roaming usage must have been using multiple gigabytes of data each month, I normally only use 500MB-1GB at most unless I am tethering something.
Click to expand...
Click to collapse
Ohhh, **it! Sorry about that, I grabbed the wrong user. My bad. Well, thanks for the followup anyhow! The information is still useful. Sounds like a similar situation to me...about to say goodbye to Sprint.
Thanks again.
Related
i know this has been a fairly well known issue but has anyone with much better comp skills than me been able to get an idea on what is causing the connection to time out?
I was looking through the registry and saw a few things but since I wouldn't have a clue for any commands I don't wanna try.
I have an extra Titan laying around but both were flashed to the new ROM and I can't get 2.17 downloaded again to load on to that one to compare the registry.
Any help at all? ? ?
Everyone seems to be focused on GPS which works just fine for me and no one cares to try the connection timeout problem.
Thanks
yea I realized that happens a lot
i havent had that issue suprisingly, but i use exchange throughout the day...
also does anyone have the 2.17 RUU they could email me (phillips.h @ gmail.com)....i can't get it from the htc site it won't complete a DL.
thanks
yea its a good thing, when im not by a power outlet all day but it sux bc at night i like to stay connected to aim, but it doesnt werk. I have a feeling that its not a bug just a way for sprint to limit the bandwidth that is used.
im having a connection problem as well, mine is a little different though. When i upgraded to the leaked rom, it put me back to prl 60610. i upgraded the prl back to 60611 and everything has been working good except one thing, at my home i get poor sprint evdo signal. I used to be able to roam on alltel's tower and get a full evdo signal. now for some reason on this rom i can only get 1x while roaming on alltel's towers, even with the same prl. I don't understand why that would happen. does anyone here know?
thirdeyeopen23 said:
im having a connection problem as well, mine is a little different though. When i upgraded to the leaked rom, it put me back to prl 60610. i upgraded the prl back to 60611 and everything has been working good except one thing, at my home i get poor sprint evdo signal. I used to be able to roam on alltel's tower and get a full evdo signal. now for some reason on this rom i can only get 1x while roaming on alltel's towers, even with the same prl. I don't understand why that would happen. does anyone here know?
Click to expand...
Click to collapse
did the PRL update help with the dropped connection?? i just checked mine and i
am also back to 60610. time to do a update....
black06c230 said:
did the PRL update help with the dropped connection?? i just checked mine and i
am also back to 60610. time to do a update....
Click to expand...
Click to collapse
i had to manually update my prl and i havent had the dropped evdo that some people have been reporting. my brother has the same rom and prl but lives 3 hours away and has the evdo dropping problem, go figure. i think there are quite a few random problems with this rom. i really would like to get evdo roaming back...
News about the internet connection issues
So I don't know if this is the same as what you are experiencing, but I am able to connect to the network (it shows connected), but it won't load the pages. I went through a bunch of steps with Verizon support and got to the point where I could do what I just described. Initially, I kept getting either the error message saying that I couldnt connect for an unknown reason or username/password was wrong (even though I double checked those). I reverted back to the VZW ROM and everything works again. I'd really like to get the GPS and REV A action going, but I just can't seem to make it work. I followed the instructions everyone gave, too. If I make any progress I'll let you know.
black06c230 said:
also does anyone have the 2.17 RUU they could email me (phillips.h @ gmail.com)....i can't get it from the htc site it won't complete a DL.
thanks
Click to expand...
Click to collapse
Way to big to email.
60 megs
well then could some one put it on a host like rapidshare or the like
I Allways use the custom 00001 prl when at school during the day due to the school haveing thick walls and when I get home my prl magicly changes to 21083 I do NOT have that .prl anywhere on my phone so I am curious... Can they change my prl without me knowing? (The only Way I notice is because at my computer I usually roam when im on the sprint 21081.prl and I see me roaming)
Auto update.
Sent from my PG86100 using Tapatalk
I could be wrong but I think that out phones auto updates prl?
If you've been into a service center recently I've heard that sprints made a policy that there tech's have to run all the phones on some new system they have which updates the phones PRL (and who knows what else) supposedly to cut down on roaming costs for Sprint.
I watched my phone automatically update.
Sent from my PG86100 using Tapatalk
awakener777 said:
I watched my phone automatically update.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Happened to me as well, auto update. Didn't know that could happen, but I'm back on custom PRL
I'm still on prl 11115 so they didn't change mine yet. Maybe they are only looking for forced roam prl's.
Sprint EVO 3D.
HW version: 002
TWRP v1.1.1
Hboot 1.4.1000
Radio: 97.10.08.08
yeah its not the first time this has happened to me and it seems to be only when i get home and use my airave...
Simple answer is yes. They magically change your PRL.
Complex answer is that based on your account type (corporate, individual, prepaid, etc.), geographical location, etc, they do a 'push' to send out updated PRL's in order to give you what they think is the best service (note that I said 'what they think is the best service' and not actually the best for each individual person). Also, when you take your phone in to have it serviced, yeah they update your software and PRL to make sure that everything is functioning properly.
If you find that it doesn't work for you, then just change it (QPST, or whatever method you prefer). It shouldn't get changed until they initiate another 'push' or gets manually updated (initiated by you or serviced by Sprint).
Are the 11115 and 00001 PRL's still up anywhere? I've lost mine and it seems all of the d/l links from all the various threads here no longer work.
Shane Pitman said:
Are the 11115 and 00001 PRL's still up anywhere? I've lost mine and it seems all of the d/l links from all the various threads here no longer work.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1346277
Sent from my S-off'd 3VO
Shane Pitman said:
Are the 11115 and 00001 PRL's still up anywhere? I've lost mine and it seems all of the d/l links from all the various threads here no longer work.
Click to expand...
Click to collapse
They definitely still work, all four of them.
Hey Guys,
I've been using the Verizon PRL 00001 for the last few months. I have no service in my house without it...none! For some reason on my last bill, I had 650 mins (200 over my 450) charged to my account when I never even hit 100 on average. No mobile-to-mobile mins were registered and most calls made after 7pm counted toward my anytime mins instead of my free nights and weekends! I looked at my call log and calls I know that were made to mobile phones (most to other Sprint customers) showed up as "Unavailable". I called to complain and I was told by Sprint that those calls were made off the network therefore they were charged to your anytime mins. I was advised to use the option "Sprint Towers Only" which means my phone is pretty much useless. A few days later, I received the famous roaming warning letter from Sprint. I cannot receive texts on the 21083 PRL even if I'm in a clear Sprint area. My phone only works in the 00001 PRL. What do I do? I've flashed several different Sense ROM's and I get the same result. I even updated my radio and build and still get the same result. I've tried other PRL's but the only one that will allow me to receive texts is the 00001. If this continues, Sprint will terminate my account but if I leave it on the 21083 PRL, I can't get texts and calls constantly drop! HELP! Thanks, guys!
Have you tried 01115?
bcarter2000 said:
Have you tried 01115?
Click to expand...
Click to collapse
I believe so...I'm retrying that now...is this an "on-network" Sprint PRL?
That one shows 4 out of 5 bars but it doesn't even let me send texts or make phone calls :/ And I'm not sure if its related, but my wifi doesn't show any bars after flashing that PRL...
What do I do?
Click to expand...
Click to collapse
Nothing you can do except switch to another carrier. If you don't have signal in your house, there is nothing you can do from the phone to get a signal, sprint just needs to add a tower closer to your house, which they will never do for just one customer. So stop screwing sprint by running the Verizon PRL 24/7 and just bite the bullet and switch.
A couple of thoughts. You could/should let them terminate you so you can get a carrier that works where you live. Did you move since you got your phone? Try and install a stock ROM with the latest OTA, and then make sure you have the current PRL and radio's. If that does not work, switch to Verizon and get the Galaxy Nexus.
Not to be preachy, but being on the 00001 prl violates your contract with Sprint as you will reach the roaming limits very fast. They are on to you at this point...
sitlet said:
Nothing you can do except switch to another carrier. If you don't have signal in your house, there is nothing you can do from the phone to get a signal, sprint just needs to add a tower closer to your house, which they will never do for just one customer. So stop screwing sprint by running the Verizon PRL 24/7 and just bite the bullet and switch.
Click to expand...
Click to collapse
I have a new tower less than a mile from my house but I guess geologically it doesn't help. I can't even receive texts in a clear Sprint area in the 21083 PRL...its got to be a phone issue. I'm not screwing anybody! I'd switch if it wouldn't cost me $350 early termination and if Verizon had an unlimited plan. I just want my phone to function as it should on a proper PRL...
Serren said:
A couple of thoughts. You could/should let them terminate you so you can get a carrier that works where you live. Did you move since you got your phone? Try and install a stock ROM with the latest OTA, and then make sure you have the current PRL and radio's. If that does not work, switch to Verizon and get the Galaxy Nexus.
Not to be preachy, but being on the 00001 prl violates your contract with Sprint as you will reach the roaming limits very fast. They are on to you at this point...
Click to expand...
Click to collapse
I've been at the same house for over 10 years...for the longest time, I was on a ROM that EPST wouldn't work so I was stuck on the 00001 to be completely honest. I'm running Mean ROM now which is pretty stock and I updated the radio and PRL to the latest OTA but the problem still persists...I don't want to sit on the 00001 PRL which is why I tried to get it correct but the phone in a clear Sprint area doesn't function properly with the correct PRL
greg.dassing said:
I've been at the same house for over 10 years...for the longest time, I was on a ROM that EPST wouldn't work so I was stuck on the 00001 to be completely honest. I'm running Mean ROM now which is pretty stock and I updated the radio and PRL to the latest OTA but the problem still persists...I don't want to sit on the 00001 PRL which is why I tried to get it correct but the phone in a clear Sprint area doesn't function properly with the correct PRL
Click to expand...
Click to collapse
if you did research, you could have added a different EPST.apk to the ROM that didn't have it or just have changed ROM's. Doesn't take a long time....
Try this
http://forum.xda-developers.com/showthread.php?t=1153371
#Root-Hack\Mod*Always_
""Shooter on Deck""
SketchyStunts said:
if you did research, you could have added a different EPST.apk to the ROM that didn't have it or just have changed ROM's. Doesn't take a long time....
Click to expand...
Click to collapse
I didn't know that until very recent...I knew some ROM's supported it and other didn't...I thought that was that...I know different now
laie1472 said:
Try this
http://forum.xda-developers.com/showthread.php?t=1153371
#Root-Hack\Mod*Always_
""Shooter on Deck""
Click to expand...
Click to collapse
I went through all of the dialer resets but my phone is stuck at updating the profile...its just spinning at the Device Configuration window stating, "The network is preparing your services..." for about 5 mins now
greg.dassing said:
I didn't know that until very recent...I knew some ROM's supported it and other didn't...I thought that was that...I know different now
Click to expand...
Click to collapse
now you know & knowing is half the battle (G.I. JOE) cheers. lol
---------- Post added at 02:22 PM ---------- Previous post was at 02:22 PM ----------
greg.dassing said:
I went through all of the dialer resets but my phone is stuck at updating the profile...its just spinning at the Device Configuration window stating, "The network is preparing your services..." for about 5 mins now
Click to expand...
Click to collapse
sometimes it takes awhile
SketchyStunts said:
now you know & knowing is half the battle (G.I. JOE) cheers. lol
---------- Post added at 02:22 PM ---------- Previous post was at 02:22 PM ----------
sometimes it takes awhile
Click to expand...
Click to collapse
Hahaha! Thanks! Actually, I think the probably I'm having with the hands-free activation is that I was still on the 00001 PRL so it wouldn't activate. I cancelled and installed the 21083 and starting over...will post results soon
No dice...it all finished successfully but I still cannot receive texts on the 21083 PRL...there has to be something wrong here
Do you have insurance? Maybe you can swap it out? Do other Sprint phones work at your house? (friends or family?)
Serren said:
Do you have insurance? Maybe you can swap it out? Do other Sprint phones work at your house? (friends or family?)
Click to expand...
Click to collapse
Yup...my roommates phone works fine at home...but I think the problem is bigger than that because I can't receive texts anywhere while using the 21083 PRL...I'm sitting at work right now with full bars and can't receive texts...I don't want to swap the phone because theres currently a 2 week back order on 3D's and I don't want to get stuck on the 1.5 HBOOT...Its got to be a setting of some sort...I had a similar problem coming back from Vegas after having to have my phone "activated" for the mid-country region while I landed and then again with my Airave. Nothing changed at all and then out of nowhere last month's bill blew up...I'm almost at a complete loss right now...
Yup...my roommates phone works fine at home...but I think the problem is bigger than that because I can't receive texts anywhere while using the 21083 PRL.
Click to expand...
Click to collapse
Well you didn't mention that before, which makes a big difference. Knowing this, it likely IS a problem with your phone, and sprint should replace it if you are still under warranty. Unroot, take into a corporate sprint store, and have it checked out.
I don't want to swap the phone because theres currently a 2 week back order on 3D's and I don't want to get stuck on the 1.5 HBOOT..
Click to expand...
Click to collapse
Well you have two choices, bite the bullet and wait a few days for a new 3d with hboot 1.5 (and deal with the 1.5 root issues), or keep having problems sending texts and making calls.
.Its got to be a setting of some sort..
Click to expand...
Click to collapse
There's no setting besides airplane mode that would make your phone not receive texts and make calls. It's clear there's a problem with the phone's radio, let sprint take care of it.
sitlet said:
Well you didn't mention that before, which makes a big difference. Knowing this, it likely IS a problem with your phone, and sprint should replace it if you are still under warranty. Unroot, take into a corporate sprint store, and have it checked out.
Well you have two choices, bite the bullet and wait a few days for a new 3d with hboot 1.5 (and deal with the 1.5 root issues), or keep having problems sending texts and making calls.
There's no setting besides airplane mode that would make your phone not receive texts and make calls. It's clear there's a problem with the phone's radio, let sprint take care of it.
Click to expand...
Click to collapse
Then why does everything work fine while on the 00001 PRL then?
greg.dassing said:
Then why does everything work fine while on the 00001 PRL then?
Click to expand...
Click to collapse
stay on the newest prl and call them and have them reprovision your phone from their end.
I have a unrooted Evo3D. Sprint is in the middle of there network vision upgrades in my area and right now reception is so poor I can't make a simple call or txt while I am at work. Is there a setting or some app that I can force it to roaming only instead of being stuck on the Sprint tower that is down until they finish the upgrades? Hopefully something that I can do without rooting or downloading different PRLs when I want to switch back and forth.
Flash verizon PRL file will solve the problem. I don't have that file on hand now. But google you will find it.
ccheung said:
Flash verizon PRL file will solve the problem. I don't have that file on hand now. But google you will find it.
Click to expand...
Click to collapse
Yes I could but it would be a pain to flash the Verizon PRL when I get to work and then flash back to the Sprint when I leave to go home.
dplcj said:
I have a unrooted Evo3D. Sprint is in the middle of there network vision upgrades in my area and right now reception is so poor I can't make a simple call or txt while I am at work. Is there a setting or some app that I can force it to roaming only instead of being stuck on the Sprint tower that is down until they finish the upgrades? Hopefully something that I can do without rooting or downloading different PRLs when I want to switch back and forth.
Click to expand...
Click to collapse
Roam Control should do what you want. Note that there is a fix in the most recent version for an unrooted Evo 3D. It costs $4 but that might be worth it in your situation.
If you decide to root your phone, MeanROM ICS 2.6 has a "roam only" option built-in.
ramjet73
Works great! Just takes a minute for it to switch over.
So here goes...
I'm on travel for the holidays, and we arrive in a backwoods Vermont town, then suddenly I lose cell signal, no biggie, this is usually expected in Vermont, but since we bring along our Wilson 45dbm cell booster, I usually regain my signal to full bars as soon as we turn it on (no matter where we are). I just thought that maybe the tower in the area was down from the snow we just got.
I thought nothing of it, until when we arrived at out destination and then I notice my phone still had no signal. At my suggestion a few years ago, I convinced the family we visited to invest in a Wilson home booster, which my wife currently has no problem picking up a signal from.
So this got me thinking, well maybe my PRL file was outdated/updated and the cell tower is not in my list. So I notice my wife has version 60690, and I had version 21090. Wow this must be really really old I thought, so I followed instructions using QPST and upgraded mine to the same version as my wife's. Still nothing, no signal what-so-ever.
Then I noticed that Sprint is upgrading their network and this meant that the newest version numbers were in the range of what I had on my phone originally, and now I think someone said 21092 is the absolute latest for the Evo 3D. So with this said, maybe I need to update my PRL to 21092, problem is I can't without a signal, and so far no one has posted it on any site yet. Anyone have the latest PRL file that I could try?
Then today I got to thinking that maybe the problem started at the car ride with the booster. Did my booster output too much power that it fried my radio? The car booster uses a stick-on antenna, not the direct to phone connector cable, so I don't see how it could have over saturated the radio, but now I am second guessing that notion. Or maybe, could my phone have a different radio than my wife's phone? I'm sure my evo3d was working the last time I was here in Vermont, but I'm not 100% certain it was the same phone.
So with this said, how can someone verify that the radio is shot? I've tried entering field trial mode using ##33284# to see if there is even a signal dbm level being reported, which it seems to see something because it does fluctuate.
Attached are some photos. Thanks!
For prls on the 3d I run the sprint corporate prls. I believe the latest we have on xda is 12126. The benefit of these is that when roaming it gives full 3g on the Verizon network as opposed to your 21xxx prl that only gives 1x. These prls I believe are distributed to customers in corporate accounts with sprint. I've been running 12124 with no problem s, I just haven't updated yet. I'm pretty sure there's a thread in the general section on this. I'm on tapatalk or I'd link you. Anyways, I doubt you fried anything... I've loaded the prl you did before and it didn't pull any signal for me either on my 3d... I have no clue what the difference is though.
Sent from my PG86100
1branchonthevine said:
So here goes...
Click to expand...
Click to collapse
I have no idea what your problem is but just wanted to say that I love the title of your thread. Sounds like a country and western song to me.
ramjet73
I forgot to add that this is a US Cellular tower that shows up as roaming on the sprint network. It's my understanding that prl files list roaming towers only, so it would seem to imply that something is wrong with the prl file. But then why does my wife's phone work when mine doesn't using the same prl. Anyhow, maybe I will try a corporate prl for giggles, just to see if it still even works. Thanks for the suggestion, I will try it soon and let you know!
Oh and thanks for the country song title idea, I should have had more fun with that one!
Sent from my PG86100 using xda app-developers app
my 3d is inferior to my 4G
Sent from my PC36100 using xda app-developers app
Thanks p3tr0s, I think I used the corporate PRL you suggested and after QPST rebooted the phone, I still had no signal. But somewhere in between going into my ICS >Settings>Mobile networks and toggling all the Domestic/Roaming/Guards and setting them back (even though this still did not give me signal), then going into >Settings>Usage and toggling Mobile Network suddenly my phone finally connect to the cell tower. Immediately after a good connection, I did a PRL update (in >Settings>System updates), and now it is using the latest 21092 PRL and it is still working just fine, so now I'm totally confused. I'm thinking that the issue was resolved somehow with the toggles. Even though I had tried toggling the Usage mobile setting and a couple of the data options on previous PRL's, I hadn't tried toggling all of them in the Mobile networks area as I did this time. But, then again, this is the first time I have gotten a signal, so maybe the combination of the corporate PRL worked is some weird way. Thanks!