EDIT!!!:
As this post was written on the 9th of December 2011, now it becamed outdated.
At that time, this was the easieset way for root, DMCR, CWR.
Now there are easier ways to root your device.
There are newer roms, kernels that already contains the DMCR and CWR.
I do not have time to update the OP.
So please keep this in mind while you read this topic!
25.01.2012.
--------------------------------------------------------------------------------
As there are some people, who likes to use the original factory rom, not the cooked ones, I decided to put together a brief tutorial on how to get most out of these roms (only basic steps!).
Important: All below mentioned are valid only for the devices with unlocked bootloader and running the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 (Android 2.3.4). It may work with others as well, but I haven't tested.
Disclaimer: In case that you follow this tutorial, I do not take any responsability for damaging, bricking your devices. You are doing everything at your own responsability!
With all these thingies that I collected, you'll have a rooted device, capable of dual way call recording, having the cwm recovery and freed from bloatware.
First of all make sure you have all the necessary drivers installed on your PC!
What we need:
- the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 generic factory ROM (Thanks to Jozinek and SE): Download link
- Flashtool (thanks to Androxyde): Download link
- rooting kernel (thanks to DooMLoRD): Download link
- patched factory kernel that enables the dual mode recording (thanks to skvalex): Download link
- CWM recovery install software, (SE Extreme Tweak Installer, thanks to quangnhut123): Download link
How2:
1. In case that you do not have the 4.0.2.A.0.42 rom on your device, flash it with Flashtool.
2. Boot your device, make the basic settings (language, wifi, gmail, so on...). Make sure you allow USB debugging mode in Settings/Applications/Development and to allow Unknown sources as well.
3. Switch off your device.
4. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
5. Flash the rooting kernel.
6. Reboot your device, check you should have superuser installed (your wifi doesn't work now, it is normal).
7. Switch off your device.
8. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
9. Flash the patched factory kernel that enables the dual mode recording.
10.Reboot your device, update superuser and # if needed (your wifi should be working now).
Congrats, now you have a rooted stock rom having the dual mode call recording enabled.
In order to enjoy this function, you'll need a recording software that uses this method, like: Download link
In case that you want cwm recovery as well, follow these steps:
11. Connect your switched on device, to your PC.
12. Run the SE_Extreme_Tweak_Installer and from its option window, select "CWM For Xperia Neo/ARC/ARC-S/Play/Pro/Ray", than press install. Wait till finishes.
13. In case that "Auto Reboot" was ticked, the device will reboot, otherway reboot manually your device.
Now you have CWM recovery installed as well. To use it, you should press and hold the VOL down button when you see the "SonyEriccson" logo while booting the device.
And of course now, in addition, you can get rid of the bloatware (list of junkies that can be safely removed from the device, the links are for ARC devices, but can be applied to RAY as well): Here or Here
The rooting procedure and the cwm recmode installation can be done in a lot of different ways as well. In my oppinion, this way, as explained above, is the easiest one(till now...).
UPDATE: Here is a very well optimized OC kernel with dual mode call recording (thanks to aire)
That's it. Good luck!
Hope you'll enjoy it.
If you like the tut, just hit the Thanks button!
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Bazonga said:
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Click to expand...
Click to collapse
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
seatone said:
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
Click to expand...
Click to collapse
Yeah I've read that, so it isn't necessary to use Doomlords kernel in order tu use the patched kernel and CWM?
Also, is there a way to combine the dual mode recording kernel with this one: http://forum.xda-developers.com/showthread.php?t=1322610 ?
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
Yes if your rom is flashable with ClockworkMod recovery, and of course is for our phone.
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
In case that the custom rom you want to use is flashable through cwr method, than the answer is yes (these roms are in .zip format).
aragog53 said:
No, it allows you to use "root asking" applications, such as Titanium Backup, Root Explorer etc...
....
Click to expand...
Click to collapse
Read more carefuly the tut before saying something... just my two cents...peace.
- patched factory kernel that enables the dual mode recording (thanks to skvalex)
Hi Seatone, Where is the source for above patched factory kernel?? Is it by you? Can you point me to the link address? Thank you.
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
10. ...update superuser and # if needed...
Click to expand...
Click to collapse
OC kernel
crownless said:
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Click to expand...
Click to collapse
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Томица said:
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
Click to expand...
Click to collapse
You're welcome!
You'll probably be prompted to update superuser (actual version 3.0.7(41) and superuser binary (#) (actual version 3.0.3.2).
Ignore.
sent from my MIUI powered C64
seatone said:
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Click to expand...
Click to collapse
Is this kernel contain both overclock and call recording patch? or just overclock?
jackchua65 said:
Is this kernel contain both overclock and call recording patch? or just overclock?
Click to expand...
Click to collapse
It contains both. And it's a very well optimized kernel.
Its ok I now have recovery!!!!
Theme's for stock getting built later !!!!
Thanks
Going make some themes
sent from my gorgeus Xperia Ray
seatone said:
It contains both. And it's a very well optimized kernel.
Click to expand...
Click to collapse
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
jackchua65 said:
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
Click to expand...
Click to collapse
Added aire's latest kernel to the OP. Thank you aire!
About the REPACK4PDA rom: As its name says it's for 4pda...I suppose...
The rom itself is great (made by aire), it's what I use (slightly modified by me) and I'm 100% satisfied with it.
Alhough I do not speak Russian, as I've understood from their homepage, they are preparing to release the rom on xda as well. So, patiance (it will be a nice rom), or try to download it from their site.
Hey seatone,
Installed the kernel from OP. Phone works smoother now. I tried to find the downloadlink for the repack4pda rom, but failed. The place where the link is, remains blank. Guess I'd have to register at 4pda to get it. Could you tell me what the major differences compared to a rooted and bloatware removed stock SE rom with batterymod and transparent status bar (as i have now) are?
Thanks,
Related
Hello,
I search how find a kernel for my device : the motorola defy.
How find kernel please ?
Thanks
Just use one of these apps: https://market.android.com/details?id=com.jiaofamily.android.km&feature=search_result or https://market.android.com/details?id=com.teamwin.kernelmanager.free&feature=search_result .
thanks you very much but I would like kernel to port a ROM. It's the same ?
kyle77680 said:
thanks you very much but I would like kernel to port a ROM. It's the same ?
Click to expand...
Click to collapse
What do you mean? Do you mean you want a kernel to base a rom on? If so, then yes you can use those kernels, but just make sure the kernel is for a rom specifically for the device the kernel is for.
thanks
I search a kernel for my defy but the bootloader is not deblocked. So I can't find a kernel, can I ?
I would like port for example a rom from an LG for my defy ?
Thanks in advance
kyle77680 said:
thanks
I search a kernel for my defy but the bootloader is not deblocked. So I can't find a kernel, can I ?
I would like port for example a rom from an LG for my defy ?
Thanks in advance
Click to expand...
Click to collapse
Your device needs to be rooted to flash a new kernel/rom. Is your device rooted?
yes it is rooted
according to this post,
"Porting an other device's rom
Well, that part is easy
- extract the system.img
- extract boot.img
- replace boot.img-kernel with the one from your stock Hero rom one.
- rebuild boot.img
- build update.zip package (look someone's hero custom rom to see how to do it)
- sign and flash
It should run place and make calls but probably won't have Wifi, BT, trackball support."
It is reallly easy ?
Thanks
For Kernel Manager (the first link in post #2), you also need to have busybox installed.
kyle77680 said:
yes it is rooted
according to this post,
"Porting an other device's rom
Well, that part is easy
- extract the system.img
- extract boot.img
- replace boot.img-kernel with the one from your stock Hero rom one.
- rebuild boot.img
- build update.zip package (look someone's hero custom rom to see how to do it)
- sign and flash
It should run place and make calls but probably won't have Wifi, BT, trackball support."
It is reallly easy ?
Thanks
Click to expand...
Click to collapse
It depends on how much experience you have in these things. To me it looks pretty easy but you may find it more difficult. I don't know if you have experience in this so I cannot say if it is really that easy for you.
(Yay! My 500th post)
last question:
How know if the kernel is good? because there are many kernel !
Or Can I extract from my phone ?
kyle77680 said:
last question:
How know if the kernel is good? because there are many kernel !
Click to expand...
Click to collapse
Read what they say. Like if you want to make your device faster, then get an overclockable kernel. If you want to conserve battery life, then get one that says undervolt. If you want more freedom, then get on with many options. (It's all based on your preference). Me, I would choose one with the most freedom so that I can change setting (cpu speed, etc.) whenever I want. Also look for the latest version (if you want to have the most recently updated one). If you still can't make up your mind, then choose based on user reviews.
thanks
so all are compatibles ok ?
and how extract the kernel ?
promised after I stop
you can just flash them using an recovery menu, or use an app for this.
I dont know if rom manager could do the job, try it
thanks for all your answers
kyle77680 said:
thanks
so all are compatibles ok ?
promised after I stop
Click to expand...
Click to collapse
All kernels you see in the app should be compatible since they are supposed to be device specific but still check to see if it says the name of your device beside the kernel.
after have ported my rom on the defy, it reboot on bootloader with errors
what may be the problem ?
thanks
kyle77680 said:
after have ported my rom on the defy, it reboot on bootloader with errors
what may be the problem ?
thanks
Click to expand...
Click to collapse
Can you post some screenshots? Also, it may have been caused by the rom not being full compatible. It may have too many bugs to operate.
over time, I advanced but now my phone bootloop
bad flash or problems with lib/ bin / etc ?
thanks
kyle77680 said:
over time, I advanced but now my phone bootloop
bad flash or problems with lib/ bin / etc ?
thanks
Click to expand...
Click to collapse
Likely to be a bad flash. Just reflash the kernel. If this doesn't fix your problem, then reflash your rom.
Do not spam this thread with stupid posts!
Detailed instructions on how to flash FXP/CM ROM.
You must be on FXP/CM or stock ROM. Download FXP/CM ROM and kernel. If you have FXP ROM, just open X10FlashTool.exe. But if you have CM ROM, download my attached bundle and copy it to FlashTool firmwares directory, then open FlashTool. Now select Flash option and select FXP/CM kernel. Turn off your phone. Hold back button and connect USB to phone. Press OK. If no errors thrown continue, else retry. Copy update.zip to SD card and reboot to CWM. For FXP, press touchscreen on logo. For CM, press back button on logo. In CWM select "wipe data/factory reset". After that select "install zip from sdcard". Then "choose zip from sdcard". Now locate FXP/CM zip and select "Yes". Reboot and enjoy!
Progress made by people who are fixing FXP/CM.
*velnens123 - LED, 2D, 3D
*dbts25 - 3G, Wi-Fi
To do/to fix list.
*Camera
*FM radio
*Low in-call volume
Some other stuff...
CyanogenMod nightlies
FXP thread
rav3n_pl's skydrive
All devs are welcome! Drop me a PM if you want to help us.
For the installation:
1- Download the zip.
2- Unzip it and save all the files to a folder somewhere on your computer.
3*- Place the loader.sin from FXP thread in the loaders folder where you have flash tool
4- Open Flashtool and click advanced tab and then click bundle creation
5- Add the loader.sin and the kernel u downloaded and click bundle creation. Close Flashtool
6- Open flashtool again and click on the bundle you just made. Flash it.
7- Boot to CWM and Flash the ROM via "install custom zip" option.
8- Enjoy
*afaik the loader provided with falshtool doesnt work correctly. Also whoever uploaded new loader could you please upload it here too? i can't remember who it was.....
Im 99.9% sure this is correct.
I don't know, really.
I saw some people making it work deleting ANT+ files and using FXP028 kernel without OC or Blagus 030 kernel.
You should ask ponanovn for help.
Also, thanks for using my concept of thread, appreciate it.
But I can't help much besides of helping noobs or testing stuff.
Good luck!
dmcb123 said:
*afaik the loader provided with falshtool doesnt work correctly. Also whoever uploaded new loader could you please upload it here too? i can't remember who it was.....
Click to expand...
Click to collapse
Kernels and loader:
http://forum.xda-developers.com/showpost.php?p=18758084&postcount=7
I will try to fix fm radio for this becouse I am free all next week.
Sent from my X8 using xda premium
@ponanovn
Good luck friend
FXP is working on it for 7x30. They say that if they can fix for 7x30, it is fixed for 7x28, because it is the same for the both chipsets.
But if you can do it better and faster than they, why not do it? Good luck, i wish you a good work
Sorry for my bad English
ponanovn said:
I will try to fix fm radio for this becouse I am free all next week.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Good luck! Should I add you to the list? Search HACKDROID thread first post and u will find an old Floyo 0.15 FM radio fix. You could see what files were added and replaced. But take files from newer roms like GingerDX.
You guys really should take XperianPro's idea of having an opensource ROM. It would bring the community together and we would have nice fast updates
please somebody fix this http://forum.xda-developers.com/showthread.php?t=1229722, it´s really hard to pull up notification bar
br
Great Idea!
mcpaddington said:
You guys really should take XperianPro's idea of having an opensource ROM. It would bring the community together and we would have nice fast updates
Click to expand...
Click to collapse
Also, it would be nice to have a base Kernel (compatible with different ROMs) so we don't have so many combos, which make devs lives a lliving hell to check which ROM work (or not) with which Kernel...FXP 027, 028, 028OC, 030, 030 Blagus, 042, 043 Kernels and ROMs, plus linuxDX and all GDX.
darkfrmr said:
please somebody fix this http://forum.xda-developers.com/showthread.php?t=1229722, it´s really hard to pull up notification bar
br
Click to expand...
Click to collapse
+1. This is the only reason that I don't move to gingerbread.
Really hope someone can fix this.
nice.. Looking forward to this one..
mcpaddington said:
You guys really should take XperianPro's idea of having an opensource ROM. It would bring the community together and we would have nice fast updates
Click to expand...
Click to collapse
DX already released source for GingerDX and is letting anyone contribute so its already done LOOOOOOOOOLLLL
also inb4moralfags
It was a lot harder to fix the FM radio than I thought so I gave up after trying for about an hour
ponanovn said:
It was a lot harder to fix the FM radio than I thought so I gave up after trying for about an hour
Click to expand...
Click to collapse
This is bad news to me. How about the cam, bro?
Sent from my E15i using XDA Premium App
radio ???
ponanovn said:
It was a lot harder to fix the FM radio than I thought so I gave up after trying for about an hour
Click to expand...
Click to collapse
Do you remember, in a previous release, there existed a FM . apk with a diferent look - CM look, blue background. Do you think that one could work, rather than SE RadioFM?
Found it:
elderduke said:
Do you remember, in a previous release, there existed a FM . apk with a diferent look - CM look, blue background. Do you think that one could work, rather than SE RadioFM?
Found it:
Click to expand...
Click to collapse
No for that to work we need rewritten audio libs.
Sent from my X8 using xda premium
Why are these things working in GDX, but not in FXP?
Can´t you just do the same thing that DX did to fix those things?
Sorry if those questions are noob ones^^
ponanovn said:
No for that to work we need rewritten audio libs.
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Maybe we could ask racht for help? I'm 99.9% sure he knows how to make radio work.
codfreak said:
Why are these things working in GDX, but not in FXP?
Can´t you just do the same thing that DX did to fix those things?
Sorry if those questions are noob ones^^
Click to expand...
Click to collapse
We are not so smart as doixanh... And he does not help us, because he is busy.
Ultimate Notification LED fix for Xperia (ICS 4.0.4, 4.1.B.0.587)
Introduction
One of the most annoying bugs in the everyday use of Sony's official ICS firmware version 4.1.B.0.431 (and later, including v4.1.B.0.587) is that the notification LED only works for missed calls, and it doesn't notify anything else anymore.
Ironically, the previous beta firmware ICS 4.0.3 v4.1.A.0.562 showed a specular bug: the notification LED didn't notify missed calls, but it was working for everything else (SMS, Email, ..).
The "Ultimate Notification LED fix"
I've got around fixing this bug by reversing and doing a minor change in a 4.1.B.0.587 framework file (services.[o]dex).
The patched file has the notification LED working for everything as it was in GB firmware: the LED now blinks for missed calls, sms, emails, and any other application showing LED notifications (eg: K9-mail, Whatsapp..).
This patch works on all Xperia devices with 4.1.B.0.587 firmware, and it has been tested initially tested on a Xperia Mini Pro sk17i.
Disclaimer
These files come with no warranty, express or implied.
By downloading and using files linked in this page you express your understanding that you use those files at your sole risk.
No one can be held responsible for any damage directly on indirectly related to files linked in this page.
If you flash something to your phone you must remember that there's always a minimal chance that something goes wrong: you know it, I can't be held responsible if your phone gets wrecked, if your working LED flashes during a work meeting and you get fired, or anything else.
Downloads and Install Instructions
To install this fix you have to be in a stock ICS 4.0.4 firmware v4.1.B.0.587, with root and ClockWorkMod (CWM) recovery installed.
To install the fix simply download the right package for you, and:
make sure your phone is charged! It's always safer when you need to flash something.
put the downloaded ZIP it in the root of your SD Card
reboot into CWM recovery
Do a Nandroid backup using CWM ("backup and restore" => "backup"): you shouldn't end in a bootloop if you download and apply the proper file, but it is a good practice to a CWM backup before applying mods and patches, so you can easily restore it and go back if anything goes wrong!
did I mention to do a Nandroid backup?
choose "Install ZIP from sdcard" => "Choose zip from sdcard"
browse to the ZIP in your SD Card
choose apply and reboot device.
enjoy a properly working led
The right package to download for you depends on your current system framework files status.
Use the following list and infos to find the proper download for you:
If you have an Xperia device on stock ICS 4.0.4 v4.1.B.0.587, and never applied other LED patches: install Busybox if you don't have it already, and download the following universal patch Ultimate_4.1.B.0.587_Notification_LED_FIX_UNIVERSAL_stock_rom_by_zxp.zip.
Note: Busybox must be installed on your device before installing this package, or it will not work. The patch scripts expects Busybox to be installed into /system/bin or /system/xbin.
If you never applied any patch and don't know what to download, this is the file you want!
Why: it is smaller, and only replaces the services.odex file with the patched one, that's all you need; the services.odex is automagically generated in your device, that's why Busybox is used, and this is what makes this package "universal".
If you your device currently has arcatarc's fix applyed: download Ultimate_4.1.B.0.587_Notification_LED_FIX_by_zxp_FOR_arcatarc_fix_users.zip
Why: if you used on arcatarc fix, this package will restore 4.0.B.0.587 framework files along with the patched services.odex, because arcatarc's fix installed the old 4.1.A.0.562 framework files and this change needs to be reverted.
If you are using a stock deodexed ICS 4.0.4 v4.1.B.0.587 firmware: download Ultimate_4.1.B.0.587_Notification_LED_FIX_FOR_DEodexd_roms_by_zxp.zip
Why: it will replace the services.jar with the patched classes.dex inside.
This works for all Xperia Devices, including but not limited to the Xperia Mini Pro sk17i/a.
If you are using the old firmware v4.1.B.0.431: you are lucky, I originally released the Ultimate LED FIX for firmware 4.1.B.0.431, you can download it from the old version thread.
If you are using a newer firmware: you have to wait for Sony to release this firmware for my sk17i, so that I can port the patch over the new version, or wait for someone to port it.
Background info, closing notes and thanks
As already specified this patch is based off stock 4.1.B.0.587 framework: I simply deodexed with baksmali, manually edited one .smali file to change the offending code that prevented the LED to work properly, and packed everything back.
I hope to find time to post very soon a Tutorial on how to apply the fix yourself, for educational purposes and to help less experienced people to port it over newer versions.
Experienced users should be able to compare the stock 587 baksmali-ed services.odex and the patched one to find the small change, and port it over new versions without the need of my forthcoming guide.
If you happen to port this patch to a newer firmware please post a link to your thread, so that I can add it in this post to inform users with such firmware that a patch exists for them.
If you want to inform other users of this patch please link back to this thread and don't simply re-upload/re-post a package. A link to this thread is the only way to be sure that users chose the proper package and can be updated if there is the need for a new/updated patch.
Bugs & Known Issues
This patch is now used by thousand of users without any reported issue or strange behavior.
If you install this patch and you end in a boot loop it means you have applied the wrong package. Please re-read the download info & instructions, and apply the proper zip. Period.
If you find any real problem please post it, and I'll update this section.
Changelog
2012.10.04 (current): applied my fix to the new firmware version 4.1.B.0.587, and released specific packages for this firmware version. The universal package now supports busybox both in xbin and sbin.
Additional Notes for those coming from arcatarc's fix
If you have used arcatarc "partial" fix you may have noticed that it had 2 major user visible problems:
the LED notification for missed calls was not working
it showed a single white blink when some notifications appeared in the statusbar: eg the Xperia Keyboard "choose input method" notification caused a white LED blink each time it appeared.
This patch doesn't have those problem, everything (seems!) to work as it should!
was waiting for [.587] Awesum
Bad thing is, that this led fix works only with stock sms app. I use other sms client, and with this, led don´t blink.
happyBOY78 said:
Bad thing is, that this led fix works only with stock sms app. I use other sms client, and with this, led don´t blink.
Click to expand...
Click to collapse
Maybe the problem lies in the alternative sms client? This fix is proven to work with email, gmail, sms, whatsapp, missed call... not only stock sms!
PS: at least this was true for .431, I appreciate feedback on the fix on this new .587 firmware because something may have changed.
zxp said:
Maybe the problem lies in the alternative sms client? This fix is proven to work with email, gmail, sms, whatsapp, missed call... not only stock sms!
Click to expand...
Click to collapse
Will this work with XS app port?
If so can I use in my rom?
Developing an ICS rom
Allen Hu said:
Will this work with XS app port?
If so can I use in my rom?
Developing an ICS rom
Click to expand...
Click to collapse
I'm sorry I don't know what is the XS app port are you speaking of.
Generally speaking it will work for you if your custom ROM uses a stock, unmodified, services.jar/[o]dex. Else you'll lose functionality or customizations.
zxp said:
I'm sorry I don't know what is the XS app port are you speaking of.
Generally speaking it will work for you if your custom ROM uses a stock, unmodified, services.jar/[o]dex. Else you'll lose functionality or customizations.
Click to expand...
Click to collapse
I mean the apps from Xperia S resized....
And is it ok if I added the v6 supercharger in services.jar ?
i have .431 patch on .587 already. which package should i use?
happyBOY78 said:
Bad thing is, that this led fix works only with stock sms app. I use other sms client, and with this, led don´t blink.
Click to expand...
Click to collapse
For me it works fine with non-stock sms app (GO SMS pro). Missed calls, etc works too zxp - Thx for the fix!
tested working on my stock 4.1.B.0.587 ST15i
Allen Hu said:
I mean the apps from Xperia S resized....
And is it ok if I added the v6 supercharger in services.jar ?
Click to expand...
Click to collapse
Xperia S apps, should work fine just like any other app with this patch I think.
I never used v6 supercharger, but as far as I can understand from a quick look it dynamically patches a given services.jar rather than simply replacing it (which is what my patch does).
So if you have v6 supercharer patch my patched service.jar/[o]dex you should have it both supercharged and with the working LED.
spyblaster91 said:
i have .431 patch on .587 already. which package should i use?
Click to expand...
Click to collapse
If you applied my .431 patch on .587 you can simply use the same type you already used. Eg: if you used the "universal" one, you can use the "universal" one again, it will override the previous one.
Which one should i apply...im using markphyton rom .587 doomkernel
Sent from my R800i using xda app-developers app
Im using the fix for .431 and works great on my .587, whats new in this one? should i change my mod?
Seems to work fine in my xperia Arc LTi15.
Thanks!
thank you so much man, finally my ARC S notif LED its work like a charm :fingers-crossed: ....
Do you know if this patch works for the Real ICS r6 rom (based on 4.1.B.0.587)?
Which package should I use in case it works?
Thanks a lot in advance!
Deshabilitado said:
Im using the fix for .431 and works great on my .587, whats new in this one? should i change my mod?
Click to expand...
Click to collapse
Yes you should use this new version on a .587 based ROM, because if you use the fixed .431 file you are actually missing some fixes/changes that sony did in input method handling and other misc code, that you will restore by applying the new .587 patch.
evo10 said:
Which one should i apply...im using markphyton rom .587 doomkernel
Click to expand...
Click to collapse
ecejmpe said:
Do you know if this patch works for the Real ICS r6 rom (based on 4.1.B.0.587)?
Which package should I use in case it works?
Click to expand...
Click to collapse
If those roms are deodexed you should use the third package (Ultimate_4.1.B.0.587_Notification_LED_FIX_FOR_DEodexd_roms_by_zxp.zip) else you have to use the first (Ultimate_4.1.B.0.587_Notification_LED_FIX_UNIVERSAL_stock_rom_by_zxp.zip): either way you must be sure that your ROM has a unmodified services.jar(/odex) or you'll loose some customization.
Im using .587. Which one i need to download?
Sent from my WT19i using Tapatalk 2
Is there a way to install it without a root or unlocked bootloader?
Thanks
botski said:
Im using .587. Which one i need to download?
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
Please read the Downloads and Install Instructions section in the first post, it contains a detailed answer to your question.
This is a FAQ for the ROM created by me and alokbina - http://forum.xda-developers.com/showthread.php?p=37247130
Q1. How to install?
Ans : -
0. Get root and CWM on .587 custom/stock rom. (Only locked bootloader)
1. Copy Rom on SD Card.
2. Flash kernel panic or any custom kernel. (skip for locked bootloader)
3. Boot into CWM.
4. If coming from V1 Rom, don't wipe data. Just wipe cache partition and dalvik cache.
5. This is compulsory - Mounts and storage-->format /system. If you are a new user, wipe data/factory reset , cache, dalvik cache, and format /system. This is a very important step.
6. Install Zip from SD Card.
7. Select the zip and install. In Aroma, SELECT THE RIGHT CONFIGURATION ELSE BRICK YOUR TOUCH.
8. At the end of installation, it will ask you to reboot the device. Uncheck that box and complete installation.
9. Then TURN OFF, do not restart. ( turn off by just pulling out the battery)
10. Remove sd card, battery and sim card for 20-30 seconds. Then re-insert everything.
11. Start phone and wait till it boots. ( If you get a bootloop, do a full wipe and re-install )
11.5 - Go to setting and force stop apex launcher and clear data.
12. Restart the phone TWICE just to make sure that everything is okay.
13. Enjoy your super smooth xperia nexus phone
14. Optional - You can now install small apps if you need it from here - http://forum.xda-developers.com/show....php?t=1929016
The small apps above are 100% confirmed to be working. You are also free to flash anything from the list of patches in the link.
Q2. When will it come for other MDPI devices?
Ans : - Just select the correct device and bootloader status in Aroma installer and you should be good to go.
Q3. Is this for both bootloaders?
Ans : - Yes! It work on both bootloaders. I have tested it myself on both. Just follow the installation instructions carefully and you should be successful.
Q4. What will happen if I flash a ST15i rom on any other xperia mdpi?
Ans : - Your touchscreen will stop functioning and you will have a mini-heart attack.
Q5. How to free more ram?
Ans : - Actually, free ram is ram wasted. But anyway - if you have any background apps running like facebook or dropbox, just go to settings and force stop them. As of android honeycomb, once a user app is force stopped, it won't start unless you manually start it.
Q6. I experience a very bad battery drain. What to do?
Ans : - This happens because of the disabled CPU rendering. Although it should increase battery life, I experimentally found out that without it battery is better. Anyway, just flash the attached adreno libs and your problem should be solved.
Q7. Wifi is not working...
Ans : - Go and check your respective kernel page for the wifi modules and flash via CWM.
Q8. Which kernel do you use?
Ans : - Kernel Panic for best performance. Battery life is okay. Approximately rate of discharge is 1% per hour.
Q9. Is this rom good for gaming?
Ans : - With Kernel Panic, I play almost all games with no lag. Temple Run 2, Dead Trigger etc. all run buttery smooth on stock frequencies. Overclocking will definitely help, but don't overclock too much as it will fry your CPU.
Q10. I need a system app which is not included in your Rom..
Ans : - Download stock .587 and place it in firmware folder of flashtool. Open the ftf with winrar and extract system.sin. Then open flash tool and go to tools--->Sin editor. Select system.sin and press dump data. Then go to extractors---->Yaffs2 and select system.yaffs2 file. Wait for the process and then you will find a folder in firmwares called as system_content. Go there and then go to app and take whatever apks you need. Don't unnecessarily create new threads requesting for some specific apks.
Q11. Is this and that mod compatible...
Ans : - Any mod that is for .587 should work.
Q12. I have locked bootloader, but it is laggy..
Ans : - Performance of your device greatly depends on kernel. As you have locked bootloader, kernel panic or any other custom kernel is out of option. If possible, please unlock your bootloader and use kernel panic for the real nexus effect. We will try out best to increase performance on locked bl.
Q13. What to do to fix all the bugs?
Ans : - For now please use any fixes that you find for the bugs. If it is compatible with .587 then it should work. We are working to fix the bugs.
Remember - ALWAYS FOLLOW THE RULES OF XDA
reserved
question
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Doubtfire said:
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Click to expand...
Click to collapse
Sorry for the delay. It will be updated in the main thread very soon. Till then - http://forum.xda-developers.com/showthread.php?t=1417375
I will also add it in the first question. Thanks.
Hope that you enjoy my rom.
Doubtfire said:
Sir, where can i Download the init.d loader because i have an experia mini st15i locked bootloader.
wanna try it. THANKS and more power!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1933849 download from 3rd post.its a zip. flash via cwm
thanks
Thanks so much!
gonna try it now.
i tried to download the ROM, but the link is error.
too much traffic and it has been disable blah blah..
Doubtfire said:
Thanks so much!
gonna try it now.
i tried to download the ROM, but the link is error.
too much traffic and it has been disable blah blah..
Click to expand...
Click to collapse
Sorry for the download link error. That stupid dropbox disabled my account for generating too much trafffic. Currently uploading to mediafire. Will update the link ASAP.
thankss
abcdjdj said:
Sorry for the download link error. That stupid dropbox disabled my account for generating too much trafffic. Currently uploading to mediafire. Will update the link ASAP.
Click to expand...
Click to collapse
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Doubtfire said:
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Click to expand...
Click to collapse
No. You will have to still flash the init.d zip given in the instructions. This issue will be fixed in the v2 of the Rom. Links have been updated. Mirrors added too.
Sent from my LT26i using xda app-developers app
ok!
abcdjdj said:
No. You will have to still flash the init.d zip given in the instructions. This issue will be fixed in the v2 of the Rom.
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
ok THanks! got your instructions.
i wonder how you answer it quickly. the whole day you are here in the forum.
Big Thanks for that!
will be back to give feedback. i hope its a smooth and less bug.
and of course hoping not battery hungry.
Doubtfire said:
now downloading :fingers-crossed:
Hitted thanks!
for the quick support.
just wanna ask, i read in the development thread, the ROM is updated it now support locked Bootloader, does it mean i dont need to flash the init.d loader?
thanks again!
Click to expand...
Click to collapse
After you use the rom please give us a review......
Regards,
AJ
Good News: ROM released for all MDPI
Happy flashing guys....
Regards,
AJ
Sent from my Xperia Mini Pro using Tapatalk 2
uhm, ok
the installation went ok. made it successful.
at first it is laggy when opening the app drawer, i restart the phone still the same. i flash the adreno driver, and i feel it is improved.
other comments, theres no any file explorer app. i can't change the launcher settings.
good thing i didnt encounter any bugs.
i hope dont find any.
Doubtfire said:
the installation went ok. made it successful.
at first it is laggy when opening the app drawer, i restart the phone still the same. i flash the adreno driver, and i feel it is improved.
other comments, theres no any file explorer app. i can't change the launcher settings.
good thing i didnt encounter any bugs.
i hope dont find any.
Click to expand...
Click to collapse
In our next release we may most probably use the apex launcher and file manager might be included in next release......can u tell how u felt the performance of the rom(other than look)?? Is it fast and did u try playing any hd games? If yes how does it works for u?
Sent from my Xperia Mini Pro using Tapatalk 2
alokbina said:
In our next release we may most probably use the apex launcher and file manager might be included in next release......can u tell how u felt the performance of the rom(other than look)?? Is it fast and did u try playing any hd games? If yes how does it works for u?
Sent from my Xperia Mini Pro using Tapatalk 2
Click to expand...
Click to collapse
yea, i tried to play HD games,
i play Cytus, at first a little lag, but after sometime it goes well.
then i tried Temple Run 2, just like a normal playing less lag, and i also tried Wild Blood, it is smooth! thumbsup!
my only prob. is the launcher it is laggy..
and after playing the above games, my phone is hot.
Ok thnx a lot for ur reply.....launcher will be replaced as i said and the phone becoming hot problem isn't experienced by me.....still i'll check it and get the solution....
Regards,
AJ
Doubtfire said:
yea, i tried to play HD games,
i play Cytus, at first a little lag, but after sometime it goes well.
then i tried Temple Run 2, just like a normal playing less lag, and i also tried Wild Blood, it is smooth! thumbsup!
my only prob. is the launcher it is laggy..
and after playing the above games, my phone is hot.
Click to expand...
Click to collapse
Sorry for the lag but it is not possible to have as good performance on locked bl as that of unlocked bl. Custom kernels are more important than custom roms for performance. If possible please unlock your bl and use kernel panic. Also, the drivers that you flashed are only if you experience a battery drain. Flashing it reduces smoothness as it disables the gpu rendering mod..
Sent from my ST15i using xda app-developers app
Hey. I have a problem with my satsuma. Bootloader: unlocked, wiped everything, flashed the ROM and the patcher, but I´m still stuck at the SONY logo. Tried both rage kernel and kernel panic.
Tai11 said:
Hey. I have a problem with my satsuma. Bootloader: unlocked, wiped everything, flashed the ROM and the patcher, but I´m still stuck at the SONY logo. Tried both rage kernel and kernel panic.
Click to expand...
Click to collapse
Strange...Now that the patch is fixed so it should work...try redownloading the patch and then try again but please make sure u don't boot ur phone without patch or else ur touchscreen maybe gone...
Press THANKS if I helped,
Regards,
AJ
---------- Post added at 11:06 PM ---------- Previous post was at 11:04 PM ----------
Or try downloading the patch from here....http://db.tt/G18gPnqI.
Press THANKS if I helped,
Regards,
AJ
The patch you gave didn´t help either. Still stuck at SONY logo.:crying:
PS: is it normal that aroma installer is only on the upper half of the screen at kernel panic?
FFB ( Fast From Birth ) ICS ROM
This is my first work so go easy people and test it slowly, i've only tested on Sony Ericsson Live with Walkman so leave feedback about other devices too !
It is based on the ICS 4.1.B.0.587 version of android ! It is prerooted, zipaligned, busybox included, and signed !
Useless apps and frameworks has been ripped off ( Generally it's a fully debloated Stock ROM ), only basic apps, wallpapers and Radio has been left untouched. I suggest running the V6 Supercharger Script after installing this so that you get the full possible boost.WARNING
This ROM was created for performance and simple phone use so don't expect fancy things like Event Stream or other flashy apps in it !!!
I am NOT responsible for anything that happens to your device when you flash this ! You take full responsibility for your actions and I am not to be held responsible in any possible way !!!
Click to expand...
Click to collapse
INSIDE the zip file is the edited stock 4.1.B.0.587 boot.img and it includes : CWM Recovery, init.d support, unsecured, App2SD support ! I want to say a big thanks to adridu59 for providing the stock boot.img unsecured, with CWM and with init.d support already in it ! ( proper info and credits below ) !!
Click to expand...
Click to collapse
Now...off to the GOOD part
To install the ROM:
1) Copy the ROM to your SD-CARD
2) Boot into recovery
2a) wipe data/factory reset
2b) wipe cache
2c) wipe Dalvik Cache
2d) wipe /system
3) Flash the zip file
If you face any problems with the installation try reverting back to Stock ICS and then flashing the ROM.
Use it with Stock or Stock-based kernels ( I have tested with Lupus kernel, RAGE kernel and a few other stock based ! ).
Click to expand...
Click to collapse
Many thanks to:
Mtakween ( For the awesome flashable zip guide ) ( http://forum.xda-developers.com/showthread.php?t=2297614&nocache=1 )
zxp ( For the Notification LED fix ) ( http://forum.xda-developers.com/showthread.php?t=1919949 )
adridu59 ( For the edited stock kernel boot.img ) http://forum.xda-developers.com/showthread.php?t=1873314
Click to expand...
Click to collapse
Just one FINAL detail:
If you want ANY of the original apks to use it just request it and i'll provide ASAP with instructions on how to install it ( if you need it and that includes removed frameworks too ! ! ! ).
Click to expand...
Click to collapse
This is the " V6 SUPERCHARGER " script thread ,made by zeppelinrox : http://forum.xda-developers.com/showthread.php?t=991276
Miracle-worker script especially for STOCK based ROMs. ( Instructions and everything you'll need you can find it on their thread )
Click to expand...
Click to collapse
ENJOY AND PLS GIVE FEEDBACK !!!
ROM (Stock Launcher) :http://www.mediafire.com/download/unc6cefxx9xa259/FFB_ROM_v5%28Stock-Launcher%29.zip
ROM (Trebuchet Launcher) : http://www.mediafire.com/download/zhlf95bn3lsgr2b/FFB_ROM_v5%28Trebuchet%29.zip
KERNEL (without my modifications ) : http://forum.xda-developers.com/showthread.php?t=1873314
Kernel ( with my mods ) : boot.img - 5.75 MB
Click to expand...
Click to collapse
Powered by : koush's Sueruser
Click to expand...
Click to collapse
XDA:DevDB Information
FFB ( Fast From Birth ) ICS, a ROM for the Sony Ericsson Xperia Live with Walkman
Contributors
JimieTheFox
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 2.6.x
Based On: STOCK ICS
Version Information
Status: Alpha
Created 2013-10-01
Last Updated 2014-01-21
Reserved
Project updated ! Alpha v5 and kernel beta v0.2 (Still no feedback so it remains same version )! If i get positive feedback for both launchers I'll keep uploading newer releases with both of them !! Download and install, ( it's your choice whether to flash the kernel or not ! )
Click to expand...
Click to collapse
Please say thanks if you like this and you want me to continue developement !
Ummm...I don't own a LWW but your OP is full of errors :/ ...
1.)V6 Supercharger needs modified services.jar and I dont see the point in running script without it .
2.)init.d support is available on both BLs ...
http://forum.xda-developers.com/showthread.php?t=1417375&highlight=init+d ..
3.)It's pointless to have a custom kernel on an unlocked bootloader without recovery ...you cant "install" recovery on Xperia MDPI ...
4.)ROM Manager doesnt work on Xperia devices ,it never worked before ,it doesnt work now
5.)No clear install instructions for each Bootloader
well, at least sumbody created a new rom after a while no devs does. Keep up your good work, fix the Op like the man above me said n please make a clean n clear explanation so you don't make regular people like me gettin confused.
karandpr said:
Ummm...I don't own a LWW but your OP is full of errors :/ ...
1.)V6 Supercharger needs modified services.jar and I dont see the point in running script without it .
2.)init.d support is available on both BLs ...
http://forum.xda-developers.com/showthread.php?t=1417375&highlight=init+d ..
3.)It's pointless to have a custom kernel on an unlocked bootloader without recovery ...you cant "install" recovery on Xperia MDPI ...
4.)ROM Manager doesnt work on Xperia devices ,it never worked before ,it doesnt work now
5.)No clear install instructions for each Bootloader
Click to expand...
Click to collapse
1.) V6 Supercharger works just fine without the modified services.jar, all you lose is the launcher strength, but you still get the Low memory killer values and kernel and all other little tweaks.
2.) Yes but without an unlocked bootloader you still get the STOCK kernel and there is no way of getting TRUE init.d support without the customized one, at least that's waht i've seen as long as i've been using my phone
3.) You can install recovey and i'm pretty sure about it. I' ve tested this.
4.) Are you sure about this ?? :\ And i say again i've tested all my instructions
5.) What do you mean clear instructions ? It's pretty easy You a) open flashtool b) connect your phone to fastboot mode and then c) flash the kernel BUT it's not like i'm here to teach anyone how to do this, it's a custom ROM people you should know what to do with it
Gsm/Wcdma bug not fixed.
Led notifications not fixed.
Status bar network icon bug.
Xperia home fc when ever you try moving a widget.
Performed all cleans, wipes and formats before flashing.
JimieTheFox said:
1.) V6 Supercharger works just fine without the modified services.jar, all you lose is the launcher strength, but you still get the Low memory killer values and kernel and all other little tweaks.
2.) Yes but without an unlocked bootloader you still get the STOCK kernel and there is no way of getting TRUE init.d support without the customized one, at least that's waht i've seen as long as i've been using my phone
3.) You can install recovey and i'm pretty sure about it. I' ve tested this.
4.) Are you sure about this ?? :\ And i say again i've tested all my instructions
5.) What do you mean clear instructions ? It's pretty easy You a) open flashtool b) connect your phone to fastboot mode and then c) flash the kernel BUT it's not like i'm here to teach anyone how to do this, it's a custom ROM people you should know what to do with it
Click to expand...
Click to collapse
1.)Whatever...
2)No such thing as true init.d and false init.d as long as script is initialized on boot...
3.)Xperia MDPI has no recovery partition so you cant install recovery .I mapped the partition layout of SK17i(which is same as all other Xperia MDPI) so yes I am pretty much confident ...
Locked BLs have Pseudo recovery which vanishes on ROM installations and dont allow format systems from update script
Unlocked BLs use Custom Boot.img with Dual Ramdisks .
4.)I am pretty sure ROM Manager doesn't work since flash_image wont work ...It will just hard brick the device or do nothing at all .....
5.)You dont have clear instructions ....Check Other threads and you will see ...All ROMs have clear instructions for Locked and unlocked Bootloaders ...
According to your instructions locked bootloader peeps wont be able to use it due to lack of fastboot ...
Also the kernel is pointless since I doubt anyone with Unlocked BL will use a kernel without Dual Ramdisk/recovery Support. "True init.d " is ok but it's not as useful as Hard Recovery for which we unlocked Bootloaders
TBH ,I think ,you don't own the device or you have just owned it AND you are coming from an LG or HTC device ...The install instructions are more in line of an HTC/LG device rather than an Xperia Device ...
yash296 said:
Gsm/Wcdma bug not fixed.
Led notifications not fixed.
Status bar network icon bug.
Xperia home fc when ever you try moving a widget.
Performed all cleans, wipes and formats before flashing.
Click to expand...
Click to collapse
karandpr said:
1.)Whatever...
2)No such thing as true init.d and false init.d as long as script is initialized on boot...
3.)Xperia MDPI has no recovery partition so you cant install recovery .I mapped the partition layout of SK17i(which is same as all other Xperia MDPI) so yes I am pretty much confident ...
Locked BLs have Pseudo recovery which vanishes on ROM installations and dont allow format systems from update script
Unlocked BLs use Custom Boot.img with Dual Ramdisks .
4.)I am pretty sure ROM Manager doesn't work since flash_image wont work ...It will just hard brick the device or do nothing at all .....
5.)You dont have clear instructions ....Check Other threads and you will see ...All ROMs have clear instructions for Locked and unlocked Bootloaders ...
According to your instructions locked bootloader peeps wont be able to use it due to lack of fastboot ...
Also the kernel is pointless since I doubt anyone with Unlocked BL will use a kernel without Dual Ramdisk/recovery Support. "True init.d " is ok but it's not as useful as Hard Recovery for which we unlocked Bootloaders
TBH ,I think ,you don't own the device or you have just owned it AND you are coming from an LG or HTC device ...The install instructions are more in line of an HTC/LG device rather than an Xperia Device ...
Click to expand...
Click to collapse
Thank you for reporting these i will fix them ASAP and sorry for missing instructions, i do own the device it's just that i never actually had a locked bootloader :\ I unlocked first thing so it's hard for me :\ I will try this with both BLs and try fixing the bugs.
Lots of bugs But thanks for your hard work bro. :good:
JimieTheFox said:
Thank you for reporting these i will fix them ASAP and sorry for missing instructions, i do own the device it's just that i never actually had a locked bootloader :\ I unlocked first thing so it's hard for me :\ I will try this with both BLs and try fixing the bugs.
Click to expand...
Click to collapse
No problem ...Take your time to fix bugs and instructions ...
karandpr said:
No problem ...Take your time to fix bugs and instructions ...
Click to expand...
Click to collapse
mustufa_kheroda said:
Lots of bugs But thanks for your hard work bro. :good:
Click to expand...
Click to collapse
Thank you very much all of you this means a lot. And i promise i'll do my best to fix all instructions and bugs
Sorry bro but is there aroma installer to choose other devices than LWW? (for example Mini pro etc...)
And... the link is dead
kingozzo said:
Sorry bro but is there aroma installer to choose other devices than LWW? (for example Mini pro etc...)
And... the link is dead
Click to expand...
Click to collapse
If you read the title, you'll see this ROM is only for LWW
Maybe I can take dev files from another ICS Rom, however it is good to have a stock .587 flashable zip with all bugs fixed (ok, except GSM/WCDMA net on reboot). If the developer won't update the links are there other projects like this? Or maybe someone can give me the links of all fixes for ICS?
Link fixed !
Yep, ROM has been tested ONLY on LWW but there is a slight chance it will work on other 2011 Xperia mdpi...not sure though !
New files UPLOADED now !!! ( They're only temporary since I plan on making a few enhancements, try them and let me know of the bugs that come up !
Also how do you see the idea of changing the default launcher ?
JimieTheFox said:
Yep, ROM has been tested ONLY on LWW but there is a slight chance it will work on other 2011 Xperia mdpi...not sure though !
New files UPLOADED now !!! ( They're only temporary since I plan on making a few enhancements, try them and let me know of the bugs that come up !
Also how do you see the idea of changing the default launcher ?
Click to expand...
Click to collapse
I'll test the Rom today and I'll tell you.
Thanks! One of these days I'll upload an updated version with a few changes. I'm working on install fixes and optimizations too !
Sent from my Xperia Live with Walkman using xda app-developers app
New files uploaded + kernel !
I uploaded the latest zip file including the kernel ! Also the kernel itself is also up and ready to download separately !
Status 6 error in CWM, there probably are problems in the updater script.
kingozzo said:
Status 6 error in CWM, there probably are problems in the updater script.
Click to expand...
Click to collapse
Ok working on a fix right now ! Thanks for the info !